Graphic Mapping:IDOC to File-Avoid Error in Adapter Engine

Hi all,
I'm using Graphic Mapping in my IDOC to File scenario in which each segment in source IDOC will generate a ROW in target File with the condition: DATBI >= currentdate (and some other conditions)
I have a UDF and use the mapping function CREATEIF for this purpose:
DATBI -> UDF -> CREATEIF -> ROW
Problem scenario: In the source IDOC if all the segments have DATBI < currentdate then there is no ROW created, and I get the error in Adapter Engine
Exception in XML Parser (format problem?):'java.lang.Exception: Message processing failed in XML parser: 'Conversion configuration error: Unknown structure ...
How can I avoid this?
I've tried to put this condition using XPATH in Interface Determination and got the error.
There is a way to use function current-date() in XPATH condition?
Thanks for your help,
Elaine

Hi all,
How can I "suppress the row node if condition fails"? I'm new in PI, so please give more details.
My FCC as follows:
Record Structure: Record, Row
Row.addHeaderLine 0
Row.fieldSeparator ,
Record.fieldSeparator 'nl'
Row.endSeparator ; 'nl'
It works fine if the condition satisfied.
In Message Mapping, I've use Test to double check my mapping, and in the scenario that conditions fails, there is no Row in the target message.
Please advise.
Thanks,
Elaine

Similar Messages

Error in Adapter engine-"No_Spedin"

Hi All,
I have observed the below error in adapter engine today(System error).
JCO.Exception while calling /SEEAG/RELI_XI_EDIINH_FILE in remote system (RfcClient[PEQ_RFC_INBOUND]):com.sap.mw.jco.JCO$Exception: (104) RFC_ERROR_SYSTEM_FAILURE: Exception condition "NO_SPEDIN" raised.: com.sap.aii.af.rfc.afcommunication.RfcAFWException: error while processing message to remote system:com.sap.aii.af.rfc.core.client.RfcClientException
The message is going to print Sumfax to SAP ECC.There are no errors in the mapping and the communication channel is also running fine.there was an upgrade in SAp recently after which i observe this error and it didnot exist before.
Can anybody please help me!

Hi Sudha
check Abhishek's Reply may be helpful at this thread for com.sap.aii.af.rfc.afcommunication.RfcAFWException
Re: Error during processing local bean: localejbs/RfcAFBean
also check the The Sender Agreement Interface , it is either missing or not correct in ID
Regards
Abhishek

ALERT not getting triggered for messages in error in adapter engine

Hi All,
I am doing the same scenario where I have created two Alert category Alert_cat1 and Alert_cat2, both are similar but one i have created for error in integration engine(Alert_cat1 ) and other for adapter engine(Alert_cat2).
Now for Alert_cat1 i have created a rule and in the setting "where did the error occur" I have given no restriction.
Now for Alert_cat2,as discussed in the above blog I have created many rule each for various adapter.
I have tested it, above mentioned configuration is working for message mapping error (sxmb_moni)
but not for any error in adapter engine for messages in waiting or system erroe status.
Kindly suggest where I am going wrong.
Regards
Shefali S

HI,
please refer this below blog:
Does Alerts work for Integrated configurations scenario??
thanks,

In my Component monitoring i got this error for Adapter engine status.

In my Component monitoring i got this error for Adapter engine status. Status is in red..
Attempt to fetch cache data from Integration Directory failed; cache could not be updated
[Fetch Data]: Unable to find an associated SLD element (source element: SAP_XIIntegrationServer, [CreationClassName, SAP_XIIntegrationServer, string, Name, is.03.server3, string], target element type: SAP_BusinessSystem)
Please clarify ASAP..
Thanks..

HI,
See below links you will get ..
Process Integration (PI) & SOA Middleware
ERR:Could not find SLD name for XI Application "DIRECTORY"
Unable to find an associated SLD element
Regards
Chilla..

Idoc to file scenario error

Hell Experts,
I have done desgin and configuration from Idoc to File Scenario in XI Intergration server.
Source is R/3 and Target system is File. I have successfully configured each and every step. Send Idoc from R/3 to Intergration server and run sxi_cache. But I didn't get successful results, always the error message shows in SXMB_MONI as follows:
Ackn Status contains system error
During the application mapping com/sap/xi/tf/_CUST_MMAP_ a com.sap.aii.utilxi.misc.api.BaseRuntimeException was thrown: RuntimeExcep
tion in Message-Mapping transformatio~
Exception of class CX_XMS_SYSERR_MAPPING
My system Patche level as follows:
SAP_BASIS     640        0012        SAPKB64012
SAP_ABA     640     0012                SAPKA64012
PI_BASIS     2004_1_640 0009        SAPKIPYI69
SAP_BW     350     0009                SAPKW35009
The above error is related to patches problems or any Mapping problems ?
Please help me.
Advanced Thanks.
Regards,
Chandra

Hi,
This may be a mapping issue, try this:
a)in interface mapping see if grids are formed at source and target after executing the test option,
b)also take the xml of the idoc from sxmb_moni , copy it and paste it at the source of the mapping ( use the src tab now) and execute the mapping, is your file structute formed?
i am not sure of the patch levels.
Regards,
Anirban.

Seeburger IDOC-to-File scenario: Error using Classifier module

Hello,
I am running the following scenario: ORDERS.ORDERS05 IDOC -> XI -> X12 850 4010 File.
In the file receiver channel, I am using Seeburger's Classifier and BIC modules as follows:
localejbs/SeeClassifier classifier
localejbs/CallBicXIRaBean bic
CallSapAdapter 0
classifier attID classifierAtt
classifier destSourceMsg MainDocument
classifier showInAuditLog true
bic classifierAttID classifierAtt
bic destEncoding UTF8
bic destSourceMsg MainDocument
bic destTargetMsg MainDocument
bic mappingName AUTO
bic newLine true
bic srcEncoding UTF8
After conversion in XI, the file fails to write to the folder because of this error:
Message processing failed. Cause: javax.resource.ResourceException: ---
Conversion of synchronous request from module chain ended with errors
---Error: [Error:ID=1010;LEVEL=1] BICMapping runMapping() The mapping:
See_XML_AnsiX12 you are trying to load cannot be found in the classpath!
Maybe you forgot to compile or to activate the mapping! DESCRIPTION:
BICMapping Error: The mapping [not specified] you are trying to load cannot
be found in the right path! Maybe you forgot to compile or to activate the
mapping!
When I set the mapping directly to See_X2E_AnsiX12_850_V4010 instead of using the Classifier module, the configuration works fine. But I want to design the receiver channel to be able to receive all types of EDI messages coming from XI.
I am only facing this problem for the IDOC-to-File scenario. Somehow the same configuration works for a File-to-IDOC scenario.
I talked to our Basis team and they said that the map See_XML_AnsiX12 does not exist in Seeburger's delivered content, although I believe that it should be. Has anyone encountered this problem before?
Any suggestions would be appreciated.
Thanks,
Arianne

Hi Yomesh,
Here is the payload.
<?xml version="1.0" encoding="UTF-8"?>
<LIST>
<S_ISA>
 <D_I01>00</D_I01>
 <D_I02/>
 <D_I03>00</D_I03>
 <D_I04/>
 <D_I05>ZZ</D_I05>
 <D_I06>CELORGS01</D_I06>
 <D_I05_2>ZZ</D_I05_2>
 <D_I07>AVX</D_I07>
 <D_I08>032008</D_I08>
 <D_I09>1718</D_I09>
 <D_I10>X</D_I10>
 <D_I11>00401</D_I11>
 <D_I12>000000008</D_I12>
 <D_I13>0</D_I13>
 <D_I14>T</D_I14>
 <D_I15>^</D_I15>
 <S_GS>
 <D_479>PO</D_479>
 <D_142>CLS01</D_142>
 <D_124>058895921</D_124>
 <D_373>20080320</D_373>
 <D_337>1718</D_337>
 <D_28>8</D_28>
 <D_455>X</D_455>
 <D_480>004010</D_480>
 <S_ST>
 <D_143>850</D_143>
 <D_329>800001</D_329>
 <S_BEG>
 <D_353>00</D_353>
 <D_92>SA</D_92>
 <D_324>4500005037</D_324>
 <D_373>20051110</D_373>
 </S_BEG>
 <S_CUR>
 <D_98>BY</D_98>
 <D_100>USD</D_100>
 </S_CUR>
 <S_FOB>
 <D_146>CC</D_146>
 <D_309>OR</D_309>
 <D_352>FREE CARRIER</D_352>
 <D_334>02</D_334>
 <D_335>FOB</D_335>
 <D_309_2>DE</D_309_2>
 </S_FOB>
 <S_ITD>
 <D_336>01</D_336>
 <D_333>3</D_333>
 <D_351>45</D_351>
 </S_ITD>
 <G_SN9>
 <S_N9>
 <D_128>L1</D_128>
 <D_369>GEN</D_369>
 <S_MSG>
 <D_933>TEST</D_933>
 </S_MSG>
 <S_MSG>
 <D_933>MESSAGE</D_933>
 </S_MSG>
 </S_N9>
 </G_SN9>
 <G_SN1>
 <S_N1>
 <D_98>BY</D_98>
 <D_66>92</D_66>
 <D_67>6310</D_67>
 <S_PER>
 <D_366>BD</D_366>
 <D_93>Graham Crawford</D_93>
 </S_PER>
 </S_N1>
 </G_SN1>
 <G_SN1>
 <S_N1>
 <D_98>BT</D_98>
 <D_66>92</D_66>
 <D_67>6310</D_67>
 </S_N1>
 </G_SN1>
 <G_SN1>
 <S_N1>
 <D_98>SE</D_98>
 <D_93>3M COMPANY</D_93>
 <D_66>92</D_66>
 <D_67>0000019591</D_67>
 </S_N1>
 </G_SN1>
 <G_SN1>
 <S_N1>
 <D_98>ST</D_98>
 <D_93>SAMPLE</D_93>
 <D_66>92</D_66>
 <D_67>6310</D_67>
 </S_N1>
 </G_SN1>
 <G_SPO1>
 <S_PO1>
 <D_350>00010</D_350>
 <D_330>10.000</D_330>
 <D_355>EA</D_355>
 <D_212>10</D_212>
 <D_639>PE</D_639>
 <D_235>BP</D_235>
 <D_234>230-1812-01JDS</D_234>
 <D_235_2>EC</D_235_2>
 <D_234_2>A00000000000002</D_234_2>
 <G_SPID>
 <S_PID>
 <D_349>F</D_349>
 <D_352>TIE WRAP,LOCKING,PANDUIT-PLASTIC PART C</D_352>
 </S_PID>
 </G_SPID>
 <S_REF>
 <D_128>CO</D_128>
 <D_127>4500005037-00010</D_127>
 </S_REF>
 <G_SSCH>
 <S_SCH>
 <D_380>10.000</D_380>
 <D_355>EA</D_355>
 <D_374>002</D_374>
 <D_373>20051208</D_373>
 </S_SCH>
 </G_SSCH>
 </S_PO1>
 </G_SPO1>
 <G_SCTT>
 <S_CTT>
 <D_354>1</D_354>
 </S_CTT>
 </G_SCTT>
 <S_SE>
 <D_96/>
 <D_329>800001</D_329>
 </S_SE>
 </S_ST>
 <S_GE>
 <D_97>1</D_97>
 <D_28>8</D_28>
 </S_GE>
 </S_GS>
 <S_IEA>
 <D_I16>1</D_I16>
 <D_I12>000000008</D_I12>
 </S_IEA>
</S_ISA>
</LIST>
Thanks,
Arianne

IDOC-BPM-FILE scenario ERRORS

Hi gurus,
I am trying to send IORDER01(pm order) from an R/3 system to a file, which works fine.
but when i try to use some business logic like if order type = 'PM01' then only i have to write to the file, using ccBPM, it fails...
this is my first BPM scenario and am having trouble....have read lot of blogs etc...can u please tell me where i am going wrong...
I have a data type DT_FILE for writing to the file.
I have interfaces:
si_oa_iorder(outbound asynchronous interface for file)
si_aa_iorder(abstract asynchronous interface for idoc)
si_aa_file( abstract asynchronous interface for file)
si_ia_file (inbound asynchronous interface for file)
I have message mapping MM_IORDER2FILE mapping IDoc to flat file structure
I have operation mapping OM_IORDER2FILE where I have mapped si_aa_iorder and si_aa_file
(( Is this right? are both abstract interfaces to be mapped? or do i need to create more mappings like si_oa_iorder to si_aa_iorder etc? please clarify...))
My IP is very simple with just a 'recv step' having container element of type si_aa_iorder and 'send step' having container element of type si_aa_file to start with..i haven't yet put the switch control etc...even such simple IP fails....
I have created Configuration objects like
Business System for file receiver
Business component for Idoc sender with adapter specific details set
Communication channels for Idoc and file adapters
No sender agreement as it is Idoc communication
Receiver agreement between the Integration Process(IP_IORDER2FILE) and the file server
2 Receiver determinations between BC_idoc_send to IP and other from IP to FileRecv system
2 interface determinations , one from si_oa_iorder of BC_idoc_send to IP and other from si_aa_file of IP to file recv system.
This is my setup and this fails....
My question is..is my message mapping and operation mappings correct? and can u see any obvious blunders i am doing?
please bear in mind that with same interfaces and sending and recv components, it runs fine without BPM....so please look at the BPM bit of mappings/config that i might have missed and please advice asap..
Thanks in advance and i am sure there would be lot of gurus for whome it is just a peanut...so please reply...
Regards
Jhansi

Hello,
I am trying to implement one pi scenario :
File -> file adapter -> ccBPM -> soap receiver adapter -> web service request -> web service response -> ccBPM -> output file adapter.
The web service that I call works file from wsnavigator. I have created all the design and configuration objects
needed for the scenario.
I place a file with following contents:
<?xml version="1.0" encoding="utf-8"?>
<SOAP-ENV:Envelope xmlns:SOAP-ENV="http://schemas.xmlsoap.org/soap/envelope/" xmlns:xs="http://www.w3.org/2001/XMLSchema"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<SOAP-ENV:Body>
 <pns:GetSetNameWS xmlns:pns="urn:file2soap2fileWSVi">
 <pns:name1>ajeet</pns:name1>
 <pns:name2>phadnis</pns:name2>
 </pns:GetSetNameWS>
</SOAP-ENV:Body>
</SOAP-ENV:Envelope>
When I look at the process monitor I get this:
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error SOAP:mustUnderstand="" xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/">
<SAP:Category>XIServer</SAP:Category>
<SAP:Code area="RCVR_DETERMINATION">CX_RD_PLSRV</SAP:Code>
<SAP:P1>Problem while determining receivers using interface mapping: No operation with XML root tag http://schemas.xmlsoap.org/soap/envelope/.Envelope exists.</SAP:P1>
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:Stack>Error when determining the receiver: Problem while determining receivers using interface mapping: No operation with XML root tag http://schemas.xmlsoap.org/soap/envelope/.Envelope exists. Problem while determining receivers using interface mapping: No operation with XML root tag http://schemas.xmlsoap.org/soap/envelope/.Envelope exists. No operation with XML root tag http://schemas.xmlsoap.org/soap/envelope/.Envelope exists.</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
I have no clue about this error. Can you help me with this ?
If yes I can send you more details, if you liked 
Hoping to get help from you,
Cheers,
Ajeet Phadnis

Idoc to File Strucutre error..

Hi Experts,
The scenario is IDOC to File scenario in which i am mapping the DESADV05 idoc at the source side and at the target strucutre i have structure like below
MT_Receiver
Header
--Field1
--Field2
Purc Order
--Field1
--Field2
SubHeader
--Field1
--Field2
Details
--Field1
--Field2
--Field3
when i populate with mulitiple Purchase orders from the IDOC the output now coming is as below
MT_Reciver
Header
--Field1
--Field2
Purc Order
--Field1
--Field2
Purc Order
--Field1
--Field2
SubHeader
--Field1
--Field2
Details
--Field1
--Field2
--Field3
Details
--Field1
--Field2
--Field3
But i require the output as ..
MT_Reciver
Header
--Field1
--Field2
Purc Order
--Field1
--Field2
SubHeader
--Field1
--Field2
Details
--Field1
--Field2
--Field3
Purc Order
--Field1
--Field2
SubHeader
--Field1
--Field2
Details
--Field1
--Field2
--Field3
So what change is required for this, i have checked with maximum options.. didnt get the above structure in output.
regards,
Kishore

Hi Abhishek,
I have modified the structure as
MT_Receiver
Header
--Field1
--Field2
BODY_NODE
Purc_Order
--Field1
--Field2
SubHeader
--Field1
--Field2
Details
--Field1
--Field2
--Field3
and when i do testing for the multiple Purchase Orders the output that coming was..
MT_Receiver
Header
--Field1
--Field2
BODY_NODE
Purc_Order
--Field1
--Field2
Purc_Order
--Field1
--Field2
SubHeader
--Field1
--Field2
SubHeader
--Field1
--Field2
Details
--Field1
--Field2
--Field3
Details
--Field1
--Field2
--Field3
Details
--Field1
--Field2
--Field3
So do i need to change any context for this.. still facing this issue
regards
Kishore

IDOC to FILE Scenario-Error in defining Adapter specific Identfier

Hi All,
I am configuring IDOC to FILE scenario where IDOC will be send from ECC to PI System.I did following configuration
I created RFC,PORT,LS and Partner Profile on R/3 System. I had maintained SLD and IR. In ID I created Configuration scenario and business system.When I click on menu->Adapter specific Identfier where I want to specify IDOC Adapter and RFC Adapter. But it is not allowing to edit it is not editable. As we provide LOGICAL SYSTEM,sender system ID and client number of the sender system.

Hi Kavi,
I assume you correctly filled the Logical System of your Business System in the SLD...
Then in Integration Direction, use menu "SLD clear cache".
Always in Integration Direction, open your Business System, go to menu "adapter specific identifier", and... close to button "close", you should have another button like something ''check'' or "compare to SLD' or ''retreive SDL data'' (I have not an openned PI to check the right term). Use this button to get value stored in SLD to this local definition.
Mickael

IDOC to File (BYpass)-- Error or Warning : " Message Branched. "

HI all,
Iam trying idoc to file scenario(bypass)
my idoc is triggered succesfully and it is reaching to the receiver system.
but the problem is in SXMB_MONI ,it is not showing my Receiver service details and showing with different symbol like " >> " with message as " MESSAGE BRANCHED".
what might be the problem....???
Also Idoc reaching to the receiving system very lately.
Pls suggest me ASAP..
Thanks in Advance.
Regards,
Vijji

In the receiver determination, do you have multiple receivers, i.e , is the same idoc being sent to multiple receivers ?
If yes, then the message branch is used to split the source message so that it can be send to differetn targets. You will find multiple entires below the Slit Message Entry one for each receiver.
Regards
Bhavesh

Reg: Error in adapter Engine Monitoring

Hi Guys,
In my RFC to File Scenario i got error as Adapter message property was configured was mandatory element but there is no Dynamic ocnfiguration elementin XI MEssage Header. This is occur in adapter engine monitoring in RWB.
Thanks

This error comes if you there is a problem in passing the file via dynamic configuration
for this if you want temporary solution like filename not necessarily be dynamic then go to receiver file adapter then
adapter specific message attributes deselect filed Failif file name does not.... sme option where you can uncheck the failure option
and in this case need to provide the filename and file will get generated with this filename if there is no filename generates using dynamic configuration
for this to resolve permanently then check the filename is passed or not to file adapter in moni in dynamicconfiguratuoin tab of callAdapter pipeline service
HTH
Rajesh

Adapter Engine alerts: Error in Adapter Engine

Hi All,
I have configured Alerts for Adapter Engine.
I am getting alerts with Alert Text as follows during Scenario runs - XML File to ABAP Proxy Scenario (Average size of files is in MB's) daily.
1.Error: DeliveryException: Problem inserting 6204b980-2f9d-11dc-9262-001635731444(OUTBOUND) into the database: com.sap.engine.services.dbpool.exceptions.BaseSQLException: Connection is invalid.
2.Error: com.sap.engine.services.ts.exceptions.BaseSystemException: Exception ( SAP J2EE Engine JTA Transaction : [c1e757e003475] ) in rollback.
This error comes just momentarily and Messages (Files) are processed Successfully (No System Errors,etc at Adapter Engine).
I am not able to figure out the reason for this exception.
Expecting your valuable inputs.
Thanks.
Regards,
Sudharshan N A

Hi,
This happens sometimes when the adapter engine is on heavy load. Since the message is asynchronous, it is persistent. So it tries to write the message onto teh backend DB on which XI is involved. When teh load is more on the AE, the communication sometimes fails for a few milli seconds. This happens at times. Once it has enough capacity, it again preocesses the message successfully. It also happens sometimes that the message content will be lost. As of now, i am not sure if there is any solution for this.
reward if helpful.
Thanks,
sarath.

What is the max file size that a Adapter Engine [J2SE] can handle ?

We are having a scenario where a 4 GB compressed file needs to be sent across without mapping, I'm trying to explore the possible options to tackle this scenario.
Some of the options, we are considering :
- Sending a file from one Adapter Engine [J2SE] to another Adapter Engine [J2SE] bypassing PI. Adapter Logs will be monitored. What is the maximum file size that can be then handled assuming a standard installation ?
- What is the max file size that Adapter Engine [J2SE] can send through PI without mapping?
Any help with the above options or with any other possible solutions to handle extremely large file transfers will be much appreciated.

Hi,
j2se is not a good option here
if you have 4gb then you need a copy solution
a) build an proxy that will just copy the file from sender dest to receiver
b) build an adapter that will do the same as proxy)
this way processing of this message will be controlled with SAP PI/XI
it will be as quick as copy & paste of the 4gb file
I did the a) for one of the flow for 300 mb and it works perfectly
Regards,
Michal Krawczyk

Maximum No of Sender File Adapters in one adapter engine

Hi,
what is the maximum no of sender file adapters we can use with a single adapter engine(having only central adapter engine) ? we are using around 15 sender (inbound) file adapter communication channels with an average polling interval of 10 mins - 30 mins, because of this the system became very slow and j2ee server process is taking more than 50% of CPU time.
Has anybody deployed more than 15 sender (inbound) file adapter comm channels in the impletation and went live successfully ? Please share your experiences regarding this.
Thanks
Pavan.

I am using 18 file adapters at sender side .
added 6 more in dev and UAT total 24 working fine in these environemnts..
my file adapters never gave me a problem unless and untill structure problem..
Regards
Rao

SYSTEM ERROR IN ADAPTER ENGINE

HI experts,
i have the scenario proxy ->xi--->third party
when i am trying to send the message from RWB->Adapter engine----->testmessage
it shows the following error in the communication channel
2011-04-13 03:35:13 Information The message was successfully received by the messaging system. Protocol: XI URL:
2011-04-13 03:35:13 Information Using connection SOAP_http://sap. Trying to put the message into the receive queue.
2011-04-13 03:35:14 Information Message successfully put into the queue.
2011-04-13 03:35:14 Information The message was successfully retrieved from the receive queue.
2011-04-13 03:35:15 Information The message status was set to DLNG.
2011-04-13 03:35:15 Information Delivering to channel: CC_Channel
2011-04-13 03:35:15 Information SOAP: request message entering the adapter with user J2EE_GUEST
2011-04-13 03:35:15 Error SOAP: call failed: java.net.UnknownHostException: hostname/port
2011-04-13 03:35:15 Information SOAP: sending a delivery error ack ...
2011-04-13 03:35:15 Information SOAP: sent a delivery error ack
let me what i need to do for this
thanks in advance
Edited by: katakoti on Apr 13, 2011 2:53 PM

Hi
thanks for your reply
i am able to send the data to that url through soap but when i am trying to use the xi to send the data it shows that error
1 .let me how we ping the host of that webservice in xi server
when i am using the proxy host and port it shows another error
SOAP: call failed: java.net.ConnectException: Connection timed out
so please advice me what actions will taken by the network guys
thanks in advance
Edited by: katakoti on Apr 14, 2011 1:20 PM

Graphic Mapping:IDOC to File-Avoid Error in Adapter Engine

Similar Messages

Maybe you are looking for