Graphics card issue/display resolution with 30" display

I've got a PowerMac G5 with a ATI Radeon 9800TX graphics card. I recently bought a 30" Apply Cinema Display but I can't get the display resolution on the computer to go any higher than 1280x800. I've read through some of the other postings and tired moving the cable from one DVI port to the other but that didn't work. If I don't get this thing working properly soon...Apple is going to get this monitor back.

I bought the ATI Radeon 9600 Pro Mac Edition
Do you mean the PC & MAC Edition?
Sometimes if I reboot it several times it works. When it works it's great resolution. The problem is every time you power down it's a battle for the computer to boot up. So, I took the card out until I can figure out why it's causing problems during start up. I followed the instructions to the letter when installing the card. First the software, then remove/replace the card.
Any suggestions as to why the computer sometimes boots up and other times not?
Probably a bad graphics card. Some versions of that card had that problem with some G4s, but worked with G5s. Maybe the current version fails on both G4s and G5s.

Similar Messages

  • Qosmio X300-14P : Graphic card issues and vertical stripes on display

    Hi,
    2 days ago, after a long notebook session of many many hours, suddenly after playing for 2 hours the game
    Patrician 4 addon, it crashed in a strange and never seen before way:
    The display would show strange and weird colours in all forms rushing over ther display. You could not recognize anything anymore, and after a few seconds of this the screen and the x300-14P completely froze/crashed (hung - no reaction on anything except power plug pull and/or 5 seconds push of ther power button).
    I was afraid since this to me looked like a serious issue of either graphic card (nvidia chip) or display.
    I hoped it was because of heat (though i have a powerful cooling pad below the notebook and heat shouldnt be a problem).
    Next day (yesterday) I launched the game immediately after startup, and after a few seconds the same crash appeared again with the same strange video glitches (never saw something strange like that before).
    I immediately did the 5 second power button press reset,. and then, when the first boot screen appears (the bios display hint and the loading/booting screen), there were like 2-7 vertical white stripes (on the black background) on the right side of the screen.
    They wouldn't move nor go away.
    I immediately turned the notebook off and it is off since then.
    To me this looks really serious, as if either nvidia chip (Geforce 9800-GTX) is broken or the display.
    Does anyone know something about this ?
    Has anyone heard of such a problem ?
    Who knows more ?
    I know, i can now connect an external monitor.
    If there is no problem, this should mean that it is a x300 display problem
    If the problem also appears on the external monitor, it is the nvidia gpu chip. That would be at least my guess.
    Has anyone any idea about this, what it might be and what i could do ?
    (i am afraid sending the x300 in to toshiba for fixing is not worth it, as it is pretty old
    (it was purchased new in june 2009). fixing it is probably too expensive.
    Any ideas about hthis problem ?
    I never had it before.
    Who can help ?
    Thanks
    P.S:
    I was thinlking about buying the new qosmio X870, but i just saw it has no express card slot, which i need for various expansion modules (like tv and video equipment, more e-sata cards etc.pp.).
    Without an express card slot i wouldn't buy any notebook, i need this slot urgently (it is like a pci-express card connection slot in a desktop pc).
    To me the express card slot is vital.
    Too bad many notebooks dont have it anymore.
    So io might need my x300 for some time,
    but what shoudl i do abpout this new strange video chip/display problem ?

    Hi,
    yes.
    even windows has now deactivated the whole graphic card, saying it was deactivated because
    it reported an error - CODE 43 .
    the stripes are still there at boot screen and bios screen, they go away though as soon as windows loads,
    but this has deacvtivated the nvidia chip (the nvidia device driver software wouldnt start at all, it says : no nvidia gpu connected (since it was deactivated by windows 7)).
    looks like i have to send the x300 to toshiba for repair (maybe even mainboard replacement).
    who knows how i can find the local toshiba repair company ?
    whom can i call in
    FRANKFURT AM MAIN
    GERMANY
    to get my toshiba notebook repaired ?
    if someone has the adress and even better telephone nummber, i would be happy.
    a second question, by the way :
    did someone of you ever replace the mainboard in a toshiba X300 / X305 ?
    how expensive was that ?
    thanks

  • I have an early 2008 Mac Pro, 8 gb ram with a Dell 27" display and a 42" LG TV. I am thinking about upgrading the stock ATI Radeon 2600 graphics card for better resolution, preferring 2 dvi outputs. Does anyone have any suggestions on the best card?

    I have an early 2008 Mac Pro, 8 gb ram with a Dell 27” display and a 42” LG TV. I am thinking about upgrading the stock ATI Radeon 2600 graphics card for better resolution, preferring 2 dvi outputs or 1 dvi and 1 vga vs 1 dvi and a mini. I don't do a lot of Final Cut Pro, gaming, etc. I am interested in best value for the graphics card.
    Does anyone have any suggestions on the best graphics card for these larger displays for the best value?
    Thanks,
    Kevin

    I recommend you install nothing older than the Apple-firware 5770, about US$250.
    RE: Mac Pro Replacement Graphics cards
    1) Apple brand cards,
    2) "sold in the Apple store" cards, and
    3) "Mac Edition" cards ...
    ... show all the screens, including Boot up screens, Safe Mode, Installer, Recovery, debug screens, and Alt/Option boot screens. At this writing, these choices include:
    1) Apple brand cards:
    • Apple-firmware 5770, about US$250** works near full speed in every model Mac Pro, Drivers in 10.6.5
    • Apple-firmware 5870, about US$450
    2) "sold in the Apple store" cards
    • NVIDIA Quadro 4000, about US$1200
    • NVIDIA Quadro 5000, about US$2500
    3) "Mac Edition" cards -- REQUIRE 10.8.3 or later:
    • SAPPHIRE HD 7950 3GB GDDR5 MAC Edition, about US$480** Vendor recommends Mac Pro 4,1
    • EVGA GTX 680 Mac Edition, about US$600
    The cards above require no more than the provided two 6-pin aux power connectors provided in the Mac Pro through 2012 model. Aux cables may not be provided for third-party cards, but are readily available.
    If you are Meet ALL of these:
    • running 10.8.3 or later AND
    • don't care about "no boot screens" etc AND
    • can re-wire or otherwise "work out" the power cabling, THEN:
    You can use many more cards, even most "PC-only cards"

  • Macbook Pro Retina 2014 Top Spec - Premiere Pro CC Graphics Card Issue

    Hello,
    For 12 months I have been having graphics card issues which all started on my 2011 MBP, which Apple replaced 12 months ago. I Then got a new shiny, 2013 highest end retina macbook pro from apple, in which after a couple of weeks had the exact same graphics issue. As soon as I start working in Premiere Pro with my 1080P DSLR footage, once the fans get up high, then the graphic colour hologram like start pooping on my screen. Now I got that retina replaced as I alerted apple about it, now they have given me the highest end 2014 model, and guess what? The problem is twice as bad.
    I think it's definitely got something to do with the Apple software. It's weird though, because on the rare occasion, the graphic poop will show up on my screen when I am on Youtube (only once in a blue moon it does that) - it does it every single time 15-20 mins into editing with Premiere Pro, once the fans get hot. I can click on the graphics poop and it makes it disappear, which is weird, maybe that proves it software issue?
    I don't know, but this problem has caused me to go through two of apples most powerful laptops, 60 phone calls to Apple, 1 investigation lodged to the Apple Engineers (the people who are above the Senior Apple Care Advisors) - Nothing seems to fix it, and I haven't been able to create any more intriguing films on my laptop because Premiere Pro CC just brings up all the graphics poop.
    Screenshots:
    http://imageshack.com/a/img537/653/IgdBK9.png
    http://imageshack.com/a/img538/9601/WLQYnM.png
    http://imageshack.com/a/img538/152/EIFd22.jpg
    Does anyone know what causes this exactly? How do I fix it?

    JGFilm88
    Thanks for the follow up information for my video card/graphics card question that came to mind out of curiosity.
    I do not have Premiere Pro and am strictly and Elements Windows user. Otherwise I would look into this matter for you first hand. The place you want to be is in the Adobe Premiere Pro Forum, although, as you already mentioned, the screen display irregularities have appeared when Premiere Pro was not being used. Have you tried uninstalling Premiere Pro to determine if its removal from the computer resolves the screen display irregularities for whatever you are doing in the computer applications like iMovie? For that matter, do you see the problem in iMovies?
    Just some thoughts to think about as you compose your inquiry for the Premiere Pro users in the Premiere Pro Forum.
    Best wishes
    ATR

  • Graphics card issue on new 2014 mini?

    I have two Viewsonic monitors hooked up to one of the new Mac Mini's. I have the 2.6 ghz version with a fusion drive. I'm using a Thunderbolt to DVI connection for both monitors (using the two thunderbolt/display ports).
    I'm having an issue where about 1 out of every 4 times I wake up the Mac from sleeping, one or both monitors have a distorted display. It almost looks like the colors on the screen are inverted. Other times one display will work, but the other is a digital version of a "salt and pepper" screen.
    Putting the computer to sleep & back awake will usually fix it, but sometimes it takes a couple of wake/sleep cycles for the display to return to normal.
    Anyone else experiencing this? Is this something I can fix, or do I have a graphics card issue? I've only had the computer for a couple of weeks now.

    I saw some posts about the screens not waking, I haven't experienced that. So far mine will always turn on, they are just either distorted colors or snow. I wonder if it's a related issue?

  • Graphics card issue - Satellite A100-313 shuts down by itself

    I have a satellite A100-313 and I'm using vista.
    Everytime when I play games, the notebook shuts itself off after some time. It varies, normally have 10-20min of playing.
    And when I immediately turn it on again, I get a black screen but the computer is running. I'd have to wait a while to turn it on again for the screen to work.
    So it starts up again and the resolution is changed to 1024x764 (the native resolution is 1280).
    I assume it is a graphics card issue (I have a Geforce 7600 Go). I already updated to the latest vista drivers available from the Toshiba site (the one from september).
    What can I do to fix this? The automatic shutdown normally only happens when I play games.
    Any help is appreciated.

    Hm, sounds tricky.
    I can suggest you the following:
    Download the latest bios for your machine from the toshiba download site:
    http://eu.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp
    And last but not least, check if your cooling system of your machine is not clobbed with dust. You can clean it up with a can with compressed air to remove the dust from the fan and the heatpipe-fin.
    If you have some questions, just ask.
    Nice weekend

  • Macbook Pro Graphics Card Issue.

    My Mac wont boot up at all, just boots into a white screen and shuts down while the fans are whizzing like crazy.I've tried resetting the PRAM and SMC to no avail.
    Before my mac would shut down whenever I use any graphic demanding application watch a youtube video or streaming a movie in quicktime (Clearly a graphics card issue) . I've reported this to apple a year ago a few times and brought it in twice, Once to an authorised retailer in Limerick and another time to a Apple store in London. In the past few months this problem has become more frequent than before where before it would only do it once/twice a month now its doing it a few times a day and at this point you can probably understand my frustration. In limerick I was told there was nothing they could do about the problem but just bring it to an apple store which I happened to go to a few weeks later while I was in london.
    In London I was told they would replace the motherboard, The macbook was with them for a few days for repairs but they could not reproduce the problem but could see what was happening since others have had the same problem with the same model. I'm wondering why wasnt my macbook replaced THEN when the issue was addressed many times over the phone with apple during the first few months of use and when I brang it into the store. Now my apple care has expired and I'm just left with a broken machine and wondering why wouldnt they replace it when I was under warrenty when there was an obvious issue that was addressed multiple times.
    I'm completly dissapointed in Apple, and am on the brink of losing brand loyalty, I've bought numerous iPhones,iPods and iPads throughout the years and the amount of issues that have not been fixed with this Macbook is crazy.I have now college in september, I obviously cant afford to pay the 750 to get it replaced, ontop of thousands of euros in college fees which I can barely afford anyway.
    I paid €2000 for this machine that I thought would last me through college but it seems not the case since my first year in college starts in september. Is there any possible way to fix this issue with my mac or is it complely fried?

    Ok, so I sarted to experience the same problem last week and this is what I did to fix it.
    First I want to explain why this Fix works so I don't look like a total jack***trying home remedies:
    What heating your GPU does is that in case that your card overheated some connections may had become loose as your logic board expands, basic thermodynamics. The heat will cause the soldering material to melt releasing the GPU pins from contact with the logic board. The heat coming form the heat gun can help to reconnect these pins. If you over heated your GPU and your card fried then your only choice is to replace it, which I don't think is possible without you having to pay for a new motherboard since the GPU is attached to it from factory. 
    Here is the link to the tutorial.:  https://www.youtube.com/watch?v=Ti8LqIHMnlQ
    Mac Released an announcement about a Faulty AMD GPU installed in some MacBook Pros and iMacs (http://support.apple.com/kb/TS5167). The Problem is apparently generated due to overheating of the GPU, however, some users had complaint that even after a new Motherboard replacement the problem persisted few minutes after they booted the computer for the first time. Apple offered a free motherboard replacement for specific models and only for limited time; If your mac was out of the timeline or did not fit the specified description then you will "Only" had to pay $350. ***** Doesn't it? I mean we already pay a substantial amount of money for Mac products and yet they want more money, corporate greed?
    So the problem starts when you suddenly experience a hang on the system, this may vary for some users, I forced Rebooting and BOOM!! there it was, a pinkish low resolution apple that only leaded me to a gray and sometimes blue screen. So I was like ok no problem my system just want attention and all I have to do is a PRAM rest. Well, nothing, went more deeper and did a BIOS reset and still nothing. Ok, I was ****** because I upgraded to a SSD few weeks ago and based on my experience this also maybe caused if you have bad Hard Drive. So started the computer in Target Disk Mode and booted it as an external drive from another mac, the computer worked just great. My Next step was research the problem and I found thousands of users having the same issue. I spent 24 hrs reading Mac Support Forums and other pages and I figured that if I remove all the ATI Files form System/Library/Extensions will actually force the computer to start in Low Resolution Mode (Google How To Start your mac as a Single User Mode and research how to use command line "rm" commands). Once you do this you will find that your main screen will behave as if it was your external monitor therefore you have absolutely no control of it trying to fix the resolution. After two days of intense research and troubleshooting I was able to have the computer working, low resolution but working, then I realized I can't do nothing at all, I mean I can't miss Family Guy episodes and this aint gonna help :|. So this video shows exactly what you need to do to make it work.
    Tools Needed: All can be found at any RadioShack Local Stores
    1. PHH00 & T4 Screw Drivers
    2. Thermal Compound
    3. Circuit Cleaner (Rubbing Alcohol Works)
    4. Heat Gun ( Can found at any Hardware store)
    <Edited by Host>

  • TS3479 I have a iMac mid 2011 with Mac OSx Lion 10.7.4. I was using iMovie suddenly today I found iMovie is not starting a window is popping up saying "iMovie requires a graphics card that is compatible with Quartz Extreme. One or more of your graphics ca

    I have an iMac Mid 2011 model intel i5 with AMD Redeon HD6750M 512 MB graphic card, 8 MB RAM.
    I was using the imovie the other day and down loaded some of the vedio clips from Sony camcorder.
    All of a sudden today while I was trying to open the iMovie it did not a window poped up saying that
    iMovie requires requires a graphic card that is compatible with Quartz Extreme................
    What is these nonsence thing happening ........
    Can any body provide some clue how to resolve the issue
    Thanks and regards in advance
    Bijan

    If it was previously working then try a smc and pram reset.
    If that doesn't fix it then see if vlc can handle the video.

  • After Effects CC 2014 Graphics Card Issues?

    I just updated to After Effects CC 2014 the other day and have been having issues with it accepting my graphics card.
    I worked with AE CC before this with this card and haven't had any issues. The program will not use the graphics card for any ray traced rendering. The error message that I get at startup of after effects says "Ray Tracing on the GPU requires an approved NVIDIA graphics card and CUDA 5.0 or later." I have CUDA 6.0.37 installed
    2013 15" Retina Macbook Pro
    Intel i7
    NVIDIA GeForce GT 750M 2GB
    512GB SSD
    Mac OS 10.10 "Yosemite"
    AE CC 2014

    This is what After Effects screen shows. Its weird because AE says that my driver version is 1.0, but its actually 6.0.37

  • Warhammer - Graphics Card Issue

    So here's my problem. I'm running vista through bootcamp and am having problems installing/running Warhammer Online becauce of what appears to be a graphics card issue?
    I screened through systemrequirementslab.com and came back with it saying I had "Standard VGA Graphics Adapter"
    The game has very specific video card requirements, which in actuality I meet. But when I try to run the game I get a black screen to crash.
    Is there a way to fix this issue? Or should just get rid of this thing and buy a PC.

    You might want to use Driver Sweeper and remove (deinstall and delete) your old drivers first, before installing new drivers.
    http://www.evga.com/forums/tm.asp?m=396474
    http://www.guru3d.com/category/driversweeper/

  • Drivers assistance required for graphics card and fingerprint reader with W8 & Pavilion DV7-6B01ED

    Hi - I own a HP Pavilion DV7-6B01ED and recently upgraded from W7 Home Premium to W8 Pro. Everything appeared to work fine except for the graphics card I have which now seems to always be on with the fan running, getting hot and running down the battery much more than before. I can not confirm what was reported as the graphics card in W7, but it is reported as the AMD 7000M after the upgrade. My invoice reports that it is a HD6490. Further to this, W8 reported an issue with this device in Device Manager.
    Due to another issue (not hardware related) I decided to do a clean install of W8 which would also let me clean things up and to re-partition my disk.
    In doing so I deleted the HP_TOOLS and the Recovery partitions. I'm not against recreating these but needed to delete them as I had 4 primary partitions and could not work within the restriction that comes with this. I understood from reading online that these can be recreated and the necessary tools re-installed (or another solution with DVD / USB employed). If the solution to my problems requires these to be installed, I'm happy to do so.
    After the clean install, I continue to have the graphics card issue (same details as above) and the other issue I have is with the fingerprint reader. It shows up as an unknown device after W8 install (it did not have any issues after the initial upgrade I performed though).
    So I've done plenty of things to try to rectify the issue and this includes installing the HP Support Assistant in the hope that this would help with the drivers. Instead of going through all the steps I've undertaken (I've read plenty in this HP forum and outside of the forum) and used certain W7 drivers, installed this that or the other program but unfortunately to no avail. I cannot get the fingerprint reader working and I still have a very hot and noisy laptop.
    I'm good enough with OS and device driver installations and happy to get stuck into some unorthodox solutions if needs be. What can I do to resolve these issues?
    Regarding the graphics card - is it a case that AMD have yet to release an updated driver? If so, I can live with that but in the meantime I would like to turn off the AMD card and work only with the integrated Intel graphics. Disabling the device in Device Manager does not seem to work. How do I do that?
    The fingerprint reader is no big deal, but ideally I would like it working. What to do here?
    If I need to do a re-install of W8 again and then get stuck into the driver installations I'm good with that, but would like to do it in a manner that will let me resolve these issues in the future without too much hassle.
    The spec of my machine is: HP DV7-6B01ED 17.3FHD / i5-2430 / 8GB / 750GB HDD / HD6490
    Thanks!

    Hello AttackofZaq....
    Thanks firstly for your reply. I re-installed W8 to start from scratch.
    OK, so I thought the AMD driver worked. I had installed it before I posted to the forum but then the problem seemed to have returned. I'll have to play with the settings because just as I type this the fan has started for no reason, same problem as before. Is there any chance Windows Updates in interfering?
    Regarding the fingerprint reader - it hasn't helped. In Device Manager I now see Biometric Devices > Validity Sensors (WBF) (PID=0018). Is there some further software I require in order to use the device. I'm going to install SimplePass to see if that's needed.
    I'll be back with an update.
    chemus79

  • Lenovo z5070 graphics card issue 'nvidia'

    i bought a new laptop .. i have windows 8.1 ... Z5070 - Graphics cards issue (Unable to play heavy graphic games. Nvidia Card) Z5070 with Nvidia Graphic card is having problem when playing high graphic games. The Nvidia graphic card is not detected and it is only using the Intel Graphic card.i install latest updates for everything.what is the problem pllz i want to play games

    Hi abdallah650, By default the graphic cards used by computer are switched automatically, depend of application to run. You can check and change this for each application in NVidia Control Panel - 3D settings.
    Also you can run each application with right click on it and choose the prefered graphic card. Read this article: switching between Intel and NVidia graphics and here.  I hope that will help you. 

  • I'm trying to view a site that sends a message that I don't have the most recent graphic card drivers to view with.  It suggests I have the ability to view, but that my drivers might be disable.  I don't know how to check to see what graphic drivers my ma

    I'm trying to view a site that sends a message that I don't have the most recent graphic card drivers to view with.  It suggests I have the ability to view, but that my drivers might be disabled.  I don't know how to check to see what graphic drivers my macbook (end of 2008 model) have enable.  Can someone help?

    You don't need to care about graphic driver on Mac OSX. It includes in OSX and run the driver your MacBook need.

  • Photoshop has crashed both my computers due to a graphic card issue. I would like to revert to old system.

    Photoshop has crashed both my computers due to a graphic card issue. How do I
    to revert to old system?

    Previous via Cloud http://helpx.adobe.com/creative-cloud/help/install-apps.html#previous
    -or OLDER previous versions http://www.adobe.com/downloads/other-downloads.html

  • Graphic card issue

    Hello everybody! I've just read about a graphic card issue of mid-2011 iMac and replacement program.
    As I am an owner of one of these computers and I'm living in Israel, and in Israel no one has heard about this issue - my question is if there is a real problem? Thanks in advance

    http://support.apple.com/kb/TS5167
    Bring a copy of that page to your authorized service center, and the link to it.
    Sadly, Apple did not put it on:
    http://www.apple.com/support/exchange_repair/
    which would be the normal place to address such programs.

Maybe you are looking for