Graphics display problem after upgrade of HTML DB from 1.5 to 1.6

I recently installed HTML DB version 1.5 from Companion CD and tested and everything seemed to work. I immediatley applied the 1.6 version upgrade but now no graphics are shown on the HTML DB ADMIN page. I checked the files from the upgrade $ORACLE_HOME/Patch/htmldb/images and the $ORACLE_HOME/CCD/marvel/images and verified the Alias in $ORACLE_HOME/CCD/Apache/modplsql/conf/marvel.conf. Do I need to look elsewhere for the images?
Phil Padgett
[email protected]

If that's the case then they made a mistake. If there's not a specific forum for HTMLDB, you could try one of the database groups because I think it ships with the database.
Regards,
Robin Zimmermann

Similar Messages

Display problem after upgrading MacBook Pro to Snow Leopard

Immediately after upgrading my MacBook Pro to Snow Leopard OSX, the display has been exhibiting vertical gray 'banding' extending up from the bottom of the display. Each band is about 1 inch wide. The display seems dimmer as well, and I can't brighten it up.
I'm in the process of upgrading to Lion (Snow Leopard was the intermediate step) and am hoping that resolves the problem. Any advice/suggestions?

I do not have answers for you, but I'll be waiting to see if someone has a "fix" for this. I am running snow leopard on a MacBook Pro, and I have a dim screen problem that doesn't brighten also. (no lines in mine, though)

Problems after upgrading to vista premium from basic

i just upgraded my laptop to vista premium from basic. a couple of changes worth to mention: the system seems to be more stable after upgrading. and ram usage reduced to roughly 47% from 55%.
bad side: can not use thinkvantage to recover my laptop to factory condition. it seems that the option has been removed. and while start-up, if i press the blue ThinkVantage bottom, the system does not go to normal rescue and recovery program.
the other problem i have is the system says i recently changed the system password (seems sth to do with the client security solution software). but i did not.and i need to verify the password. and problem appears, the system says my password is wrong.
any thoughts on these problems?
thx

I agree with Cedric on the repair disk. As you have installed a "different" OS the Master Boot Record has been changed resulting in the loss of the function.
Andy ______________________________________
Please remember to come back and mark the post that you feel solved your question as the solution, it earns the member + points
Did you find a post helpfull? You can thank the member by clicking on the star to the left awarding them Kudos Please add your type, model number and OS to your signature, it helps to help you. Forum Search Option T430 2347-G7U W8 x64, Yoga 10 HD+, Tablet 1838-2BG, T61p 6460-67G W7 x64, T43p 2668-G2G XP, T23 2647-9LG XP, plus a few more. FYI Unsolicited Personal Messages will be ignored.
Deutsche Community Comunidad en Español English Community Русскоязычное Сообщество
PepperonI blog

USB Speaker/LED Cinema Display Problems After Upgrade to Mavericks

I just upgraded to Mavericks this morning. My set-up includes a new (Late 2013) 27" iMac and a 27" Apple LED Cinema Display, with the mini display port and USB connected from the display to the iMac.
I have a set of Bose USB speakers that I had plugged into the USB port on the Cinema Display for audio. I didn't want to waste one of the USB 3 ports on the iMac so instead was using a USB 2 port on the Cinema Display. This worked fine before upgrading to Mavericks.
Now with Mavericks installed, if I have the speakers plugged in, I get a tone that sounds like very loud feedback. If I plug the USB speakers into one of the USB 3 ports on the iMac however, it works fine.
Does anyone know if this is a known issue with Mavericks? I've read some other posts about display issues, but they were referencing USB displays. In this case the display is connected via mini displayport, but the USB connection on the display seems to be causing issues.
Anyone else experienced this?

I've been experiencing additional issues with USB speakers. I plugged them into a USB port on the iMac itself (as opposed to the LED Cinema Display) and the feedback was gone. However, now I get situations where the audio appears to randomly "die" on the system. If I go into Audio preferences and switch the audio output to the internal speakers, the audio comes back on. If I then switch it back to the USB speakers, it continues to work until it randomly dies again. This happens typically 3-5 times a day.
If I just use the internal speakers as the audio output, I don't get any issues with losing the audio. The USB speakers worked fine on the iMac before upgrading to Mavericks, and still work fine on my late 2011 MBP still running 10.8.5.
I've read about other similar issues (http://www.imore.com/losing-audio-os-x-mavericks-heres-what-you-can-do-about-it). Still waiting for a fix.

3.1 Bug? - Images don't display properly after upgrade to 3.1 from 3.0

When pages are displayed after the upgrade, the image appears the first time the page is opened. Once a user goes to another page, then come back to the page with the image, the image is no longer displayed.
This happens when the browser is set to "Check for newer versions of stored pages". When it checks for the new version, the image is not displayed.
This looks like a Bug? Is someone working on a fix for this?
Thanks.
- Scott

Scott,
Thanks for this information. It is very helpful. May I put you through one last contortion, please?
I would like to see what information is being passed in the HTTP header in the request for one of these broken images. If you have Live HTTP Headers or Firebug for Firefox, or Fiddler for IE, this should hopefully be easy. You don't seem technically challenged in the least, but just for the record, here's what I did using Firefox:
1) Ran the Timesheets application
2) For the very first icon on the left "My Timesheets", I right-clicked my mouse and chose "Copy Image Location"
3) I opened up a new tab in Firefox and pasted the URL and then hit enter to retrieve the image
4) I turned on Live HTTP headers and then clicked Refresh in my browser.
I am most interested in the If-Modified-Since HTTP header. The full request on my system was:
GET /pls/apx11c/wwv_flow_file_mgr.get_file?p_security_group_id=191046216955701077&p_fname=eba_timesheets.png HTTP/1.1
Host: apexdev.us.oracle.com:7778
User-Agent: Mozilla/5.0 (Windows; U; Windows NT 5.1; en-US; rv:1.8.1.12) Gecko/20080201 Firefox/2.0.0.12
Accept: text/xml,application/xml,application/xhtml+xml,text/html;q=0.9,text/plain;q=0.8,image/png,*/*;q=0.5
Accept-Language: en-us,nl,it;q=0.9,en-gb;q=0.9,ja;q=0.8,de;q=0.8,zh-CN;q=0.7,zh-tw;q=0.7,en;q=0.6,af;q=0.6,fr;q=0.5,pt-br;q=0.5,ko;q=0.4,ca;q=0.4,de-ch;q=0.3,zh;q=0.3,bn;q=0.2,ja-JP;q=0.2,fr-ca;q=0.1,ru;q=0.1,ru-RU;q=0.0
Accept-Encoding: gzip,deflate
Accept-Charset: ISO-8859-1,utf-8;q=0.7,*;q=0.7
Keep-Alive: 300
Connection: keep-alive
If-Modified-Since: Wed, 20 Feb 2008 22:54:09 GMT
If-None-Match: "1951996202472197182454517155409"
Cache-Control: max-age=0Thanks in advance.
Joel
P.S. I nuked the Cookie line of the request, as it contained my e-mail address and I want to avoid the Web harvesters of e-mail addresses.

Problem after upgrading to Snow Leopard from Tiger

Hello all!
I have an old macbook pro 15" purchased on 2007. It's model is macbookpro3,1 and it runs Mac OS X Tiger 10.4.11. Recently I upgrade the system to Snow Leopard. Everything seems to be fine except the laptop runs much hotter.
At first I don't know why but then I found out that on the Energy Saver menu, there is no options to select between the intel onboard graphics card and nVidia 8600M GT. And it seems the system selects the 8600M GT as the default card, therefore my GPU temperature is always about 60 Celsius degree.
Another problem is the Airport card is also hot, it's always about 60C degree (according to iStat Pro)
So anybody has same problem with me? It'd be great if you could help me figuring out these issues.
Thanks a lot!!!

TonyHeli wrote:
At first I don't know why but then I found out that on the Energy Saver menu, there is no options to select between the intel onboard graphics card and nVidia 8600M GT.
Are you sure there is an Intel onboard graphics processor in your MacBook Pro? AFAIK, Mac laptops do not have multiple graphics processors -- MBP's have a single fairly powerful one with dedicated video memory & regular MacBooks have only a somewhat less powerful one that use shared system memory.
For example, the MacBook Pro (Mid 2007, 2.4/2.2GHz) Technical Specifications make no mention of an Intel GPU.

Graphics display problems (dialog boxes) Lenovo G50 AMD A6 Win 8.1

Graphics display problems Lenovo G50 AMD A6 Win 8.1 Greetings to all. After having spent a number of days trying to find a solution to a display problem, I turn to this forum for help. I own a Lenovo G50 AMD A6 Win 8.1 ever since November 2014, and have had display problems ever since the first day, be it while using internet (Firefox or Explorer) or various software (Text editors, etc.). Many dialog boxes, including colour settings and controls (open, close etc.) either have an inappropriate appearance or even do not appear at all! I manage to "click" on the right places using memory: most areas are INVISIBLE! Another example would be that I do not see any backround colour or image on most webpages such as this one).  Some suggestions included checking for graphics updates (but the drivers used were already up-to-date).  I 'd be most obliged for any new suggestions. Thank you very much. George

Greetings to all, I finally decided to express my utmost discontent with- the Lenovo G50-45 I bought before Christmas 2014,- the summary response with inappropriate links that I received after exposing my problem- the fact that I tried to dowload the following graphics driver  (Beema) AMD Driver (VGA, HDAudio, SATA) for Windows 8.1 (64-bit)
exe
526 MB
Windows 8.1 (64-bit)
VGA V14.502.1002.1002-Logo'd_HDAudio v9.0.0.9905_SATA v1.3.1.220;VGA v13.302.1601.1001_HDAudio v9.0.0.9905_SATA v1.3.1.220
3/19/2015from here(http://support.lenovo.com/fr/fr/products/laptops-and-netbooks/lenovo-g-series-laptops/g50-45-notebook-lenovo/downloads/DS100174), and after REFUSING to accept cookies and some "Lenovo Service Bridge", finally managed to obtain something HERE(http://www.notebookcheck.net/Lenovo-IdeaPad-G50-45-Notebook-Review-Update.125641.0.html).  I find it quite disrespectful to NOT provide customers with EASY support, as well as avoiding to answer their requests for further help when some simplistic "assistance" that one can find almost anywhere on the web leads to no further solution. I shall not repeat the problems I have faced till now: vide supra. The problem, however, is NOT just with browsers.I simply cannot see any dialog box content and colour in MANY software programs, such as OPEN OFFICE; for instance: PRESENTATION colour dialog boxes show BLANK squares instead of squares filled with different colours. This has occured AVER SINCE DAY ONE! Finally, a new bug has appeared: Windows 8.1 keeps popping up some email program to which I am invited to register - I never created a Windows email account, and certainly don't intend to do so.NOR shall I accept some "Lenovo Service Bridge", however "discreet and inoffensive" it might be. I don't know if there are any legal grounds for customers to complain for all these problems. I DO know, however, that I shall NEVER buy a LENOVO device ever again. The pricing and processor might be competitive => yet, the support that ensues is, as far as I'm concerned, LAMENTABLE. To make a presentation, I have to switch to a Samsung R20 using XP..... What is the meaning of all this? George

MacBook Pro 13" (2011 late). second display problem after update

Updated to mountain lion this second and there is no signal out (thunderbolt to displayport cable) since ive upgraded. in lion there are no problems. does your external display work after upgrade to mountain lion?
(monitor HP ZR24w)

Does your Macbook Flash Blue at all? I have the same thing, and it won't even flash blue

Problems after upgrade bios to v4.3 - P67A-GD65

Hi to everybody,
I was having a problems after upgrade bios to v4.3 of my mainboard P67A-GD65.
After upgraded bios version (FW) its interface was changed and seemed better. also some specifiactions upgraded that i am now able to follow information of bios in my windows. with Control Center.
1) first of all after bios upgrade XMP memory section can only be enable şf ş choose OC geniue on. but with this my cpu warm till 98C degree. because i have only stock cpu cooler of intel.
in normal mode xmp can not be activated so that my memory that corsair vengeance dd3 1600mhz works at 1333mhz only.
Also there was information about what is new in this version of bios fw as:
- Enhanced PCI-E display card performance.
- Improved memory compatibility.
2) second problem that i have i wanted to turn cpu leds which were located above cpu slot blue leds. once i turn them off and it is ok. but when shutdown computer and restart it turn on itself.
so may be there have benn occured a problem that mb can not save edited settings correctly?
3) For last i could not find Winki 3 OS/linuz anywhere is there a link to it to integrate to my mb?
Thanks for your replies from now on.
Greetings.

Quote from: momosala on 02-April-13, 17:54:22
I think you had better to flash back to beta 4.39 bios, here : https://forum-en.msi.com/index.php?topic=164135.msg1214789#msg1214789
And use and install on USB key MSI Forum HQ USB flashing tool from here : https://forum-en.msi.com/index.php?topic=108079.msg800577#msg800577
Flash using method 1.
And tell us if that works.
thank you for reply that fast i will try asap and tell here.
Btw, have you ever face a problem as i wrote above?

Problems after upgrade: Leopard to Leopard no longer works

My sister upgraded to Leopard on her iMac(c2d) to Leopard yesterday. Earlier in the day we were able to do video chats with a number of people(her machine Tiger to Fathers machine Leopard). However, since upgrading, we've experienced weird behavior for video chats. Basically in her window she won't see her image(the small one), and I don't see her at all. We've tested this out with a number of other iChat accounts and get the same results. Btw, all machines that are chatting with her are using Leopard. Also, all other forms/capabilities work: screen sharing, sharing of pictures, audio chats.
Anyone out there have similar problems after upgrading from Tiger to Leopard? I have done the usual adjustments of bandwidth and QT settings, as well as restarts. What else should I try?
tia,
n

I finally resolved this problem: I think the issues/steps would be helpful for anyone who experiences iSight off or not working problems after upgrading to Leopard(then to 10.5.1) on a intel 20" iMac :
Problem:
-If you have an internal iSight on an iMac and your camera works fine in Tiger
-If you upgrade to Leopard
-If Chat camera doesn't show your image (iSight off) even though the green light is on
-You can see the other persons video on iChat
-Your friends can here you and you can share screens, files, etc.....everything but have them see you
These are the initial steps I took:
- Deleted the pLists(or stored preferences for the Application) described at the top of this thread
- Was told it might be slow internet connection so did various things: disconnected other computers, changed wireless to "G" only
- Specifically Opened of ports spec'd for Leopard on router (even though I hadn't needed to do this under Tiger)
- Tried chats with various people on various fast/slow networks
- Restarted all aspects of the network: router, wireless access point, computer
- Checked to see if the iSight was shown in 'System Profiler'. It was found in 'About This Mac->More Info->System Profiler->USB'
- Clicked Video icon in iChat Buddies window(to the right of your name) and coudn't see my image
- Opened 'PhotoBooth' and coudn't see my image(black screen)
- Opened iMovie and couldn't capture video via the iSight(black screen)
- Opened iChat->Preferences->Video and couldn't see my image
- Validated that 'Camera is Enabled' in iChat->Video->Camera is Enabled
If you are experiencing a similar problem with you built-in iSight, I would probably focus on the last 5 things that I did. What they showed me was that the iSight was just not capturing video even though it was capturing sound in 3 different applications.
The solution to iSight Off or iSight Not Responding or No Video is......reset your computer! I had thought my sister performed this but it turns out she hadn't. Here's the link to this procedure:
http://docs.info.apple.com/article.html?artnum=303446
Very easy to do though: Power off computer and unplug all cables, including power cable for at least 15 seconds. Plug everything back in and power up the computer and retry clicking on the 'Video' icon next to your login name. If you see yourself then...problem is solved.
While I eventually found posts in several other forums, it took me the better part of a week. To try this simple step. I wish I had done so straight away. Oy. I guess I learned a lot about ports, speed etc.
I hope this helps.

Problems after upgrading to iTunes version 6

Hello,
I've been going through the threads a lot since I have had problems after upgrading to iTunes v. 6. It looks like a lot of people have had the same issues, and I have tried some things that were recommended. After I upgraded, iTunes would not open. I tried:
1. deleting sidb file
2. doing the msconfig thing suggested in discussion boards
3. going into safe mode and deleting 4 and 6 letter weird files in DOS - I found 3 that I deleted
iTunes worked after this -- then I bought a song and it said my computer was not authorized, after I authorized computer (that never happened before), iTunes worked for about 15 more minutes and then closed down abruptly. I haven't been able to open it since.
I also downloaded Spybot search & destroy and that did not find anything. I am using McAfee, and have scanned for viruses with McAfee and AdAware.
Now, when I restart my computer, a bunch of windows pop up with Chinese/Japanese looking characters and say that device (I think) was not found. I seem to be able to use everything except iTunes and Quicktime. When I open the Task Manager, iPodService.exe and iTunesHelper.exe and qttask.exe are there, but when I click on Quicktime or iTunes the file flashes in Task Manager and then disappears.
I'm not sure where to go from here.
Any help would be apppreciated -- I'd like to be able to open iTunes!

Hello,
I used Nickroo's post:
I was able to get iTunes launched (with the help of Tech Support) in a very unsafe environment. I owe it to those who may need this after me. It will get you going, but you will be extremely vulnerable to internet virus assaults. Please do not use this approach, until you have exhausted every other available solution for your issue in the KB.
There are three Steps 1) Uninstall 2) Disble and 3) Reinstall.
UNISTALL Uninstall iTunes using Windows utility Add Remove Program available in Control Panel.
DISABLE Disable all third party System Services and Startup Items using using MSCONFIG utility as described in Service Document http://docs.info.apple.com/article.html?artnum=302538
RE-INSTALL Re-install iTunes6 + QT7. Launch it under the Selective Startup Option.
It worked ! You realize among other things at this point you have your Antivirus and Firewall disabled. When I started my computer in the Normal Startup Option, iTunes fails to work again. So I have ahead of me the long and ardous task of ruling out the service that is causing conflict with iTunes6. Then work with the software vendor to arrive at a solution.
This seems to have worked so far- I haven't started to go through ruling out what made iTunes not work; I also haven't tried to connect my iPod or burn a CD, so we'll see.
Windows XP

Permission problems after upgrade to 10.5 on early Power PC G5 Tower

Permissions problems after upgrading to 10.5 on a client power PC (early) G5 tower.
Problems include folders that are created on XServe via this client do not allow any one else including this client to access. All other clients running 10.5, which happen to be newer Intel machines do not have this problem. Repairing permissions, updating to 10.5.1, try to manually correct permissions have all failed to repair the situation. All clients log onto the XServe with the same user/password. This client has since been downgraded back to 10.4.9 and has no issues.
The Xserve runs 10.3.9, any help would be greatly appreciated.
We have read through the forums regarding permission problems after upgrading and even tried some tips found here.

You really should check things out first before speaking.
Here are the requirements for 10.5;
Mac OS X v10.5 Leopard requires:
A Mac computer with an Intel, PowerPC G5, or Power PC G4 (867 MHz or faster) processor
512 MB memory or more
A DVD drive for installation
9 GB of available disk space or more
Some features require a compatible Internet service provider, fees may apply.
Some features require Apple's MobileMe service; fees apply.
Allan

Layouts problem after upgrade

Hello, I have a problem after upgrade from 2007 to 8.81 PL 05.
Since we upgrade SAP, the layout changed.
For example, in a credit note if it has 3 lines, in the layout will appear 2 lines in a page and 1 in other page.
if the credit note has 4 lines, in the layout will appear 3 lines in a page and 1 in other page.
What could it be?
Thanks in advance.

Hi!
lines are not duplicated, they just printed on different pages:
- if doc has just 2 lines - printed form is good
- if doc has 3 items, two of them are printed on the first page, 3d - on the second page
- if doc has 4 items, 3 of them are printed on the first page, 4th - on the second page
When we are printing directly from the server everything is working fine. But printing from all Clients gives us this issue that is described above.
SAP re-installation for all users will take too much time. May be exist any other option that we can try?
we really appreciate your help
Natalia

Problem after upgrading to ICS 4.0.4

i have different problem after upgrading my SE Live with Walkman to ICS 4.0. After upgrading, my sd card always full. I have try to remove some files but after that it full again. Finaly i found that there are tumbnail file with size precisely same with my empty space. I delete that file, but the empty space not recover, its only recover after unmounting sd card. But its not hold for long time, after one minutes its happen again, my sd card is back fully again, and the same file is back to exist. Please help me, is that a virus or bugs from ICS?? i very frustation with this case
thanx for your help

Do you have many pictures?
Have your tried to reinstall the phone software using SUS to check if the problem remains?
http://www.sonymobile.com/gb/tools/update-service/
- Community Manager Sony Xperia Support Forum
If you're new to our forums make sure that you have read our Discussion guidelines.
If you want to get in touch with the local support team for your country please visit our contact page.

Several problems after upgrading to iO6

My iphone is with multiple problems after upgrading to iOS 6. Applications are closing alone, the screen goes black and then back to the home screen. does not connect to internet (3G and Wi-Fi) connections as cutting. Throw another quick update to fix this, or do I have to change to the Galaxy SIII; Iphone is Terrible!!

Try the Padma extension.
*Padma: https://addons.mozilla.org/firefox/addon/padma/

Graphics display problem after upgrade of HTML DB from 1.5 to 1.6

Similar Messages

Maybe you are looking for