Gray InfoObjects in Infoset

I am trying to enable reporting on InfoObjects on my InfoSet in BI 7.0, but whenever I open the InfoSet I cannot check the box next to the InfoObject name because it is grayed out.
Can anybody explain how to remedy this?
I will award points.

Infoset can be operated only with Master Data Infoobjects. Are the Infoobjects you use are the master data ones?? plz check..

Similar Messages

  • Multiprovider-links with infoobjects and infosets

    Hi Gurus,
    Advance thanks to all.
    Can any of tell me how can seen the multiprovider is link up with the infoobject and infosets in seen  t.code or etc,the link  with the infoobject etc will happen in backend is it correct ?
    waiting for your points.
    regards
    sanjeev kumar

    Hi,
    at RSA1 --> info provider,,find and click your multiprovider on next screen there are tabs(infoset/info cubes/info objects/dso), check each tab. thru tshat you will know the objects which are connected to your multi provider.
    On each tab if any object name maintained and selected then that is connected to your multiprovider.
    Thanks

  • Infoobject in infoset but not displaying in query designer

    Hi,
    I have created a query on infoset(ods1 & ods2).
    a custum defined infoobject (fiscyr) is not displaying in query designer while it is present in infoset.
    pls give your inputs,for why this infoobject is not available in query designer.
    Thanks
    Radika

    Hi Radika,
    I cannot think of anything other than the solutions already mentioned in this thread (checking the IOBJ in infoset, running RSISET and activating it). I just had a foolish idea that you might not be looking for the right IOBJ. All the IOBJs from an infoset are not displayed with their original technical names in the query designer. They are disdplayed in the format: <infoset_technical_name>_FXXXXX where XXXXX is a number.
    Also try one more thing. Go to transaction RSISET and type in the technical name of the infoset there.
    Right below the box where you type the Infoset name is a check button. Check your Infoset there and then activate it from within the RSISET transaction (the activate button is right after the check button). With Infosets, sometimes just activating it from within RSA1 does not work but RSISET always seems to work.
    Do this and see if it helps.
    Thanks & regards,
    Nikhil

  • Technical names of infoobjects in infosets

    Hi,
    I have create an Infoset through several ODS and cubes. System automatically generates technical names starting with F, at design screen for each infoobject in ODS or cubes. But i want to see and use original tech. names of objects especialy on the BEX design screen. F names are confusing me.
    Is that possible ?
    best regards,
    Yigit

    Technical names are assigned sequentialy.
    You can enter in Infosets definition and push the button of technical names (the most right one)
    In BEX i think is not possible.

  • Wrong data when i create a report on infoset in BI 7.0

    Customer No has the master data(C100,C200,C300,C400) and C300 and C400 are not performed any transaction in the cube.
    Created a infoset with left outer join on infoobject (Customer No) and the Infocube(which has the transactions done by the Customer)
    i kept the Customer No in the rows and the Netsales in the column of the report in BI 7.0 query desiner and when i run the query i got the result as C100 and C200 only  not C100,C200,C300,C400
    But the result should show C100,C200,C300 And C400
    Please clarify me what could be the problem ?

    Did you select Customer from the cube or the Infoobject for Infoset?

  • Steps to create Multiprovider and infosets..

    Hi gurus,
                 Can anyone post me steps to create multiprovider and infosets..
    Points will be awarded.
    Thanks in advance,
    Venkatesh

    A MultiProvider is a type of InfoProvider that combines data from a number of InfoProviders and makes it available for analysis purposes.
    The MultiProviders itself does not contain any data. Its data comes entirely from the InfoProviders on which it is based. MultiProviders only exist as a logical definition. These InfoProviders are connected to one another by a union operation.
    One can combine InfoCube, ODS objects, InfoObjects and InfoSets in a MultiProvider.
    A union operation is used to combine the data from these objects into a MultiProvider.
    Here, the system constructs the union set of the data sets involved. In other words, all values of these data sets are combined.
    InfoSets allows reporting on several InfoProviders by using combinations of InfoObjects (master data-bearing characteristics) and ODS objects via a join condition.
    An InfoSet can have following join conditions
    Inner Join
    Left Outer Join
    Inner join and left outer join are only different in the situation where one of the involved tables does not contain any suitable record which meets the join conditions.
    steps for creatin multiprovider.
    Step1: Enter Transaction RSA1. Right Click on Infoarea and select u2018Create MultiProvideru2019. Provide technical name and description for the MultiProvider.
    Step2: Select Data Targets (InfoCube, ODS and InfoObject or Infosets) on which MultiProvider should be based.
    Step3: Select the Characteristics which should be part of the MultiProvider design.
    Step4: Select Time Characteristics and Key figures.
    Step5: Create dimensions and assign the characteristics to the dimensions.
    Step6: Identify the characteristics, time characteristics and key figures in u2018Identificationu2019 tab.
    Step7: Save and Activate the MultiProvider.
    steps for creating infoset.
    Step1: Enter Transaction RSA1. Right Click on InfoArea and select u2018Create InfoSetu2019. Provide technical name and description for the InfoSet.
    Step2: Choose ODS or InfoObject on which  you want to build InfoSet.
    Step3: Select the characteristics/key figures required in InfoSet design and join the common characteristics via Inner or Left Outer Join.
    Step 4: Save and Activate InfoSet.
    hope this helps you in creating them...

  • Not able to check navigation attribute in Multiprovider

    Hi Gurus
       I am trying to check the navigation attribute in the multiprovider which is built against Infoobject, ODS, & Infoset. I am not able to do it bcoz it is grayed out in the multiprovider.
    I checked in the infoobject definition, there it is turned on navigation.
    FYI, i am using version 3.1C
    Please help me out.
    Thanks
    Sansen.

    Hai San,
    If you want to make the object under Navigational in the multi provider that object should come from Cube(Possible).
    If you want to bring that object under navigational through Infoset(not Possible).
    Regards,
    Vijay

  • Multiprovider on multiprovider ?

    Hello BW Experts,
    Multiprovider on Multiprovider possible ?
    Thanks,
    BWer

    hi BWer,
    i think no,
    currently only infocubes, ods, infoobjects and infosets are available.
    hope this helps.

  • Business Metadata in SAP BW

    Hi Folks,
    I am karthik ramanathan doing my project in SAP BW and my topic is
    'Extraction of Business Metadata from SAP BW'.
    I am new to this field and I would like to know what are the Business
    Metadata needed & useful for the SAP customers. And know more about different
    business metadata available for SAP Customers from SAP BW.
    In other words what are the possible business metadata needed for SAP
    Customers for the following BW objects - ODS, Reports,Querys, InfoObjects,
    InfoCube, Infoset, Update Rules Routines, InfoPackages, PSA, Source Systems,
    etc..
    Thanx in Advance. All your suggesstions and answers are welcomed.
    Warm Rgds
    karthik.

    Hi Karthik,
    first of all welcome on board and good luck for this new experience as developer in SAP BW.
    Are you talking about metadata concept or business content, so, you need to know which type of functional areas are covered by BW std objects ?
    Business Content is a pre-configured set of role and task-relevant information models based on consistent metadata in the SAP BW.
    Business Content provides selected roles within a company with the information they need to carry out their tasks.
    This information model includes integral roles, workbooks, queries, InfoSources, InfoCubes, ODS objects, key figures, characteristics, update rules, and extractors for SAP R/3, mySAP.com Business Applications, and for other selection applications.
    Business Content can be used in particular industries without being modified, it can be modified, meaning you can work with it to any degree of detail and serve as a template or an example for customer-defined Business Content.
    If you need more details about metadata definition, take a look to http://help.sap.com/saphelp_nw04/helpdata/en/80/1a6197e07211d2acb80000e829fbfe/content.htm
    However, always refer to help.sap.com->Documentation-> SAP NetWeaver->choose your release....
    Hope it helps (and don't forget to assign some point by clickin on the yellow star!.....for details see /people/mark.finnern/blog/2004/08/10/spread-the-love ...)
    Bye,
    Roberto

  • "Transfer process" in BW 7.0

    Hello everybody    
    Does anybody have any information about what it is called as a "transfer process" in BW 7.0?  We would like to know how to launch a "transfer process" or how to manage it or whatever.
    I don't know anything about this subject, and I think this is a new concept in BW 7.0.
    Thanks in advance,
    Regards, Inma

    Hi Inma,
    Transfer process = Transformations
    Transformations:
    -->Trsnsformations are used to create mappings between two BI Objects and to
    transform data from BI Source(From where) to BI Target .
    -->You can create One-One Mappings between source and target in BI
    -->In transformations Source is : DataSource, InfoSource, DataStore object,
    InfoCube, InfoObject and InfoSet
    -->Target is: InfoSource, InfoObject, DataStore object and InfoCube.
    -->Transformations replaces the transfer and update rules.It's like creating transfer
    rules and update rules.Through these rules/mappings/transformations, the
    system is going to transform data from Source to Target.
    *Do the following steps to create transformations:
    -->Right Click(Context menu) on Infocube/Infoprovider.
    -->Select Create Transformations
    -->You can create transformations by using Infocube, Data store object,
    Infoobject, Infoset and Infosource.
    -->You need to specify the Target and Source. Between what you want to create
    transformations in Object Type.
    -->Then you will get Transformations screen by generating Proposals, where you
    can create the mappings.
    -->Finally save and activate inorder to use the transformations.
    Example: Following is one example in creating transfer process.
    Steps to create Routines:
    -->Once you are on Create Transformations screen
    -->Double Click on Rule Type(Click on '=' symbol)
    -->You will see
    Description of the rule: xxxxxxx
    Target Infoobject: xxxxxxxxx
    Rule Type: xxxxxxxx
    Conversion Routine:xxxxxxx
    -->Use F4 and select Rule Type as Routine.
    -->Create the Routine.
    -->Finally save vand activate it.
    -Sreekanth

  • Multiprovider Creation

    Hello Experts,
    While creating multiprovider, unable to find ODS in the selection screen.
    ODS is activated. Any pointers on this would be appreciated.
    Thanks
    Konda Reddy

    Hi Konda Reddy,
    while creating multiprovider, in the first tab, cubes will be there, in 2nd tab, DSO will be there, and in 3rd tab Infoobject, next Infosetes in last tab, Aggretaion levels will be there.
    and tabs below  Display options select first option "Display all infoproviders"
    Regards
    Daya Sagar
    Edited by: Daya Sagar on Feb 16, 2009 5:29 PM

  • Currency Conversion problem in query designer

    Hi,
    A requirement has come that infoobject which contain multiple currency type, need to convert into a single currency type in Bex reporting as user want to see only one currency value in report.
    There are three keyfigures refering different calenders for conversion. For examle . GR amount is based on GR date, IR amount is based on IR date and PO amount is based on Doc date. Query is build based on a infoset.
    I am doing following steps to achieve the task::
    1. In TCODE - RSCUR, created three Currency Conversion Type each for GR, IR and PO and each one refering different 0calday calender
    2. Defined exchange Rate Type as "M"
    3. Currency Tab -> Source Currency = "Source Currency from data Record"
        Target Currency -> Fixed Target Currency = "USD"
    4. Time Ref. Tab -> Fixed Time ref. = "Current Date"
        Variable time reference = "To the exact day"
        Special InfoObject = <InfoObject name>
    5. In query designer, Key figure property for GR amount -> Conversion -> Conversion type = <Name of Currency Conversion Type which defined in RSCUR>
    6. Repeated the same for IR Amount and PO Amount key figure
    While saving, getting following error::
    *Cannot apply Currency translation type <Currency type name> in Infocube <Infoset name>. *
    Diagnosis
    You tried to translate a query element with the currency translation type <Currency type name>. The translation type <Currency type name>, however, has variable time reference or variable target currency relevant to characteristic Document Date. Characteristic Document Date is also not available in InfoProvider <Infoset name> and it references either none or more than one characteristic () of the InfoProvider for Document Date, or Document Date is not a base characteristic.
    System Response
    Procedure
    Adjust the query definition or create a special currency translation type for one of the characteristics .
    Please help!
    Please note that there are three key figures which need conversion using different calenders.
    Sanjiv

    Hello,
    I have done the same what you said, but same error still showing.... 
    I also tried to change from "Special InfoObject" to Infoset level and it works with one KF. Since all three KF are under one Infoset and there is limitation that if Currency Conversion Type is defined on Infoset level then only one KF will be assigned for a Infoset where as I am using three KFs with three relevant time characteristic.
    Any suggesion from others?
    Sanjiv

  • RE: Transformation and Data transfer process.

    Hi guys,
    Please some bosy help me out by providing the differences between Transformation and Data Transfer Process.
    thanks in adwance
    omkar

    Hi Omkar,
       Trnasformations providing the mapping between Sorce fields( datasource to  data target).  only map the structures..
    <b>Transformations:</b>----
    -->Trsnsformations are used to create mappings between two BI Objects and to
    transform data from BI Source(From where) to BI Target .
    -->You can create One-One Mappings between source and target in BI
    -->In transformations Source is : DataSource, InfoSource, DataStore object,
    InfoCube, InfoObject and InfoSet
    -->Target is: InfoSource, InfoObject, DataStore object and InfoCube.
    -->Transformations replaces the transfer and update rules.It's like creating transfer
    rules and update rules.Through these rules/mappings/transformations, the
    system is going to transform data from Source to Target.
      but DTP  means.. the data loading procedure will be  done with this step..
    <b>DTP :</b>
       DTP is used to transfer data from PSA to the infoprovider.
    The data transfer process can also be used to control data distribution from a BI system into any target outside of the BI system. For this purpose, a data transfer process with an open hub destination is used as the target.
           Since Deltas are now based on request from PSA ,you can have multiple datatargets pulling data with same selection criteria from same datasource(ECC) with INITS/DELTA,not possible earlier.
    http://help.sap.com/saphelp_nw2004s/helpdata/en/42/f98e07cc483255e10000000a1553f7/frameset.htm
    Creating DTP
    http://help.sap.com/saphelp_nw2004s/helpdata/en/42/fa50e40f501a77e10000000a422035/content.htm
    regards
    @jay

  • InfoSet maintance - added new InfoObject, not available in query

    Hi,
    We appended a new field to the 0VENDOR_ATTR extractor and the data comes accoss fine.  We are using InfoObject 0CREDITOR in an InfoSet.  When I did an 'adjust' step to the InfoSet, the new InfoObject became visable but the check box is grayed out and the new InfoObject is not usable in a query.  Is there any way to change the check box so that the new InfoObject is available in a query?
    Thanks,
    John

    Hi John,
    Change your 0CREDITOR InfoObject and make sure that the 'Attribute Only' box is not checked.  You will be unable to make it usable in an InfoSet query if this box is checked.  Let me know if this solves your issue.
    Josh

  • Infoset - Field selection grayed out for few of them?

    Hi,
    I have created an Infoset b/w InfoObject and ODS. Some of Info Object attributes selection is grayed out. In other words I am not able to select them.
    Why only few attribute selection is grayed out? Is there any way I can make them selectable?
    Thanks
    Padma

    Jaya,
    You are right. All the attributes that are grayed out are marked as "attribute only".
    Thanks a lot
    Padma

Maybe you are looking for