GRC 10.0 Landscape and installation

Currently we use Virsa 400_700 on ERP6.0 and planning to implement to GRC 10.0
We know GRC10.0 can be installed on NW7.02 with SP 06 and EHP2.
We have below landscape question for GRC10.0
Can GRC10.0(components - AC/PC/RM) and Plugins(RTAs) be installed on same host ?
In other words,
As per SAP documentation, GRC10.0 is installed on central host and
backend hosts communicate to this central host thru RFC (plugins are installed on backend hosts).
I want to have both GRC 10.0 and Plugins installed on each backend host so that there is no need of RFC's.
We also know each backend host should have latest SAP version for GRC10.0 to be installed.
Will the above landscape work? have any one tried it?
Any suggestions of your experience will be rewarded with full points......
thanks & best regards,
Kannappan.S

Hi,
I don't think so it is possible because an ERP system cannot be GRC server and GRC server client as well. Because you need to install plug-in's on remote system and GRC patches on the grc server. Also, you need to activate a lot of BC sets in GRC 10 which you cannot activate on GRC client system. So, what you are saying is technically not possible.
Thanks
Sunny

Similar Messages

GRC: Landscape and Installation

Dear All,
My Company want to implement SAP GRC Access Control, in many of source i've found that SAP GRC is divided into 3 sequences:
1. Get Clean
2. Stay in Clean
3. Stay in Control
My Question is:
1. What is the software files to implement each of them sequences?
Actually i've read the master guide and installation guide from market place for this installation but still confused about this landscape of this installation, Please help me to install fresh SAP GRC 5.3 all above sequences? any other references?
Thanks in advance.

Hello
You are right, that the SAP GRC Access controls implementation is generally shown in three stages.
1.Get clean
2.Stay clean
3.Stay-in-control
We have four products / modules in SAP GRC Access controls :
1. Risk Analysis and Remediation (RAR)
2. Enterprise Role Management (ERM)
3.Compliant User Provisioning(CUP)
4.Superuser Privilege Management (SPM)
GET-CLEAN : The access and authorization management starts with installation and configuration of RAR. RAR helps to identify all the existing SOD (segregation of duty) violations in the backend ERP systems. Once the SOD violations are identified, these will be addressed either by removing the risks from the system or introducing mitigation controls for the risks.
STAY-CLEAN : We have three products here to install and configure in this stage, i.e ERM, CUP and SPM.
ERM : It helps in preventing further introduction of SOD violations in to the system, by making the risk analysis of roles at the point of creation itself.
CUP : Ensures the user management (assignment of roles ) is free of SOD violations
SPM : Ensures the actions of superusers free of SOD violations by tracking and controlling their activities effectively
RAR, ERM, CUP and SPM have many more benefits which will be helpful in effective access and authorization management and I mentioned only the relevant points here.
Further, all these four products are independant of each other and the sequence of configuration depends on the client's requirement. However, the integration of these products helps to reap the complete benefits of access control suite.
The general sequence of configuration would be:
RAR -> SPM -> CUP -> ERM
The Master, security, configuration guides of these products can be found @ http://help.sap.com/ businessobjects/accesscontrols and the best practices @ SDN
STAY-IN-CONTORL : Involves continuous review of existing access and cuthorization managment to ensure that the ERPs are free of SOD violations.
Regards
Swarna

Installing SAP GRC AC 5.3 and 5.2 in same windows server

Hi All,
Is it possible to run both SAP GRC AC 5.3 and 5.2 on the same server? Basically for testing purpose prior to upgrade?
What would be the technical issues?
Regards,
Nagendran

Hi All,
We have a similar requirement:
We have WAS640AC5.2 running in a windows server connecing to backend landscape "A". We plan to install WAS700AC5.3 in this same server for backend landscape "B".
What i would like to know is WAS640AC5.2 & WAS700AC5.3 can exist together in the same server?
Regards,
Muruga

After download and installation of PS PE12 I have problems starting the programm. After selecting video and new project nothing happens, only the colorbar below new project is showing

New computer.
After download and installation of PS PE12
I have problems starting the programm, double clicking on the icon.
After selecting video and new project nothing happens, only the colorbar below new project is showing, nothing happens.
(expected was to activate the program and the sarting the PE12)
PSE12 runs fine
System:
WIN8.1 / i7 /16GB RAM

New computer.
After download and installation of PS PE12
I have problems starting the programm, double clicking on the icon.
After selecting video and new project nothing happens, only the colorbar below new project is showing, nothing happens.
(expected was to activate the program and the sarting the PE12)
PSE12 runs fine
System:
WIN8.1 / i7 /16GB RAM

HT4085 So does this mean that I cannot have rotation lock off and the mute function off at the same time? In other words, can I have my screen rotate automatically as I hold my iPad in either portrait or landscape AND hear sounds from my apps at the same

So does this mean that I cannot have rotation lock off and the mute function off at the same time? In other words, can I have my screen rotate automatically as I hold my iPad in either portrait or landscape AND hear sounds from my apps at the same time?

In other words, can I have my screen rotate automatically as I hold my iPad in either portrait or landscape AND hear sounds from my apps at the same time?
Yes, you can. You can configure the Side Switch (above the volume button) either as Mute switch or Rotation lock.
Settings > General > Use Side Switch to: choose what you like the Side Switch to function as.

Awful Experience with Delivery and Installation of Appliances from BBY

I went to the Best But in College Park, MD on 02 March 2015 with the intention of buying an appliance suite (refrigerator, range, and dish washer). A sales associated assisted me promptly upon entering the store, and I let him know what I needed to purchase and that I would need delivery, installation, and haul away for all three items. He stated that the delivery, installation, and haul away was included with the price of all three items, and we scheduled my initial delivery date for 13 March 2015.
The evening before my delivery, 12 March 2015, I got a call from the Geek Squad giving me a three hour window they would be there to deliver and install my items. In going over the order with the representative I asked if the same crew dropping off the appliances would be installing the plumbing for the dishwasher. Contrary to what I was told in the store at the time of purchase, the representative on the phone notified me that a dishwasher installation was not sold to me and the following day the only thing the crew would be doing is dropping off the dishwasher. She then instructed me to call the store to see if there was any adjustments that could be made that would not change my delivery date the following day.
So, I call the store and explain what is going on to the representative in customer service. He instructs me that he cannot add the installation on to the order for the next day because the route has already been made and the warehouse told him its too late to change. So, instead he, in conjunction with his manager, said he can add the dishwasher install for a later date that I was available, but the delivery of the range and the refrigerator would remain for the following date. After about 45 minutes we work through the kinks and he lets me know he will call me back the following day to give me a solidified date and time that the dishwasher can be installed.
So, the following day comes and the time frame for my delivery and installation of the range and refrigerator comes and goes without hearing a word from Best But or the Geek Squad. So, I call customer service and the rep I'm speaking with lets me know that whatever the in-store rep did over the phone the following night put the entire order into reschedule and nothing would be delivered to me that day. Imagine my frustration because I've taken off from work to take possession of appliances that AREN'T GOING TO SHOW UP. Immediately, I hang up with customer service and go into the store where I originally purchased the appliances. I was told it did in fact get pushed into reschedule and my only option was to reschedule the delivery AGAIN. After working with both the rep and the General Manager in-store I was able to get the delivery rescheduled for 23 March 2015 with the dishwasher installation added to the order for free since it was an error caused by a Best Buy employee.
On 21 March 2015, I got the calls from the automated system giving me my three hour window the installers would be there on the 23rd of March to install my items. On 23 March 2015, the crew with the refrigerator and the range showed up first. They asked me to come to the truck upon arrival because there was some issue with the refrigerator and they wanted me to see it before they unloaded it and brought it up to my home. The refrigerator of course shows up badly dented on the door, so I refuse it because I haven't gone through all of this to take possession of a damaged product. The delivery man let me know that if I did take possession of it, they would offer me some discounts because it was damaged. I said no thanks and he called customer service for me to speak with a woman at the warehouse about the damaged product. The woman at the warehouse said she was going to check their inventory and call me back within a few moments to reschedule a new unit to be sent out. They install the range without an issue. Next, the dishwasher team shows up and that goes off without a hitch. Of course, I didn't hear back from anyone at the warehouse at all that evening to reschedule the delivery of a new refrigerator.
All in all, this has been a HORRIBLE experience with Best Buy. As a loyal Elite Status Rewards Zone customer and a former employee of the Best Buy in College Park, MD, I can say after this appliance experience, Best But has lost a lifelong customer. The level of customer service I received was sub-par and their attempts to correct an issue that started with their employee giving me improper information about installation being included in the price of all the appliances made the situation worse. I ended up returning the refrigerator because I refuse to wait any longer or go through anymore drama in order to take possession of something I paid for twenty days ago and can't receive because of Best Buy's inability to get their act together. I ended up purchasing a refrigerator from Sears immediately after cancelling my order for the one from Best Buy and it was delivered next day and damage free.

Hello canbro34,
The purchase and delivery of new appliances should be exciting and fun and not result in the kinds of tribulations that you describe. Our representatives should ensure that you have everything you need for a successful delivery and installation and I was surprised to read that the did not. I apologize for your having to cope with this frustrating experience.
I was gratified to read that the store's general manager was able to work with you to help assuage some of the problems that were created. It was regrettable that the refrigerator arrived damaged, but I was happy to hear that the delivery and installation of the other appliances went smoothly.
Although I understand your reasons, I was dismayed to read that you elected to purchase your refrigerator from a competitor and that this experience may influence your future shopping destination. It is my hope that you will give Best Buy another chance one day soon.
Please know that I am sincerely grateful that you took the time to share your experience with us.
Sincerely,
John|Social Media Specialist | Best Buy® Corporate
Private Message

My Lightroom stopped working at all. I unistalled the app and installled back a few times and it still won't open.

My Lightroom stopped working at all. I unistalled the app and installled back a few times and it still won't open.

Are there any error messages? Mac or PC?

How can I change the apple ID on my iPhone to clear all contents and installation?

I still have my iPhone 4s, Which I stopped using when the screen died. I bought a new iPhone 5s. Since, I've changed my Apple ID main e-mail address.
Today I had the screen of the old 4s fixed. Now I want to clear all contents and installation so that I can sell it.
Problem is, that it keeps asking me to verify my Apple ID with my old e-mail address, which obviously doesn't work.
I've allready changed the Apple ID e-mail address in the Apple-ID area in settings. But this doesn't help.
Does anyone know the way out of this?!?
Thanks!

http://support.apple.com/kb/HT5661

I need to make Landscape and portrait in the same file ? plz I don't want to go back to word

Hi there I am trying to have page in landscape and portrait in the same file, but I couldn't, however, if there is a way where we can perform it please advise me as I need to do that for my thesis. Am happy to work only in pages if this feature is not in pages, please find us a solution.
Regards
Mohammed

Export te document to PDf. Open it in Preview. Here you can rotate the a page to horisontal.

I have a lock rotation on my iPad 2 and it won't change from landscape and I tried to reset it but nothing and I tried from lock rotation to mute but nothing and I don't no what to do now. Can u help me plz?

I have a lock rotation next ti my battery on my iPad 2 and it won't change from landscape and I tried to reset it but nothing and I tried from lock rotation to mute but nothing and I don't no what to do now. Can u help me plz?

With Settings > General > Use Side Switch To set to 'Lock Rotation' have you then moved the switch on the right-hand side of the iPad above the volume control 'off' ?
Or with the switch set to control 'notification mute' you should be able to unlock rotation via the far left of the taskbar : double-click the home button; slide from the left; and it's the icon far left; press home again to exit the taskbar. The function that isn't being controlled by the side switch is set via the taskbar instead : http://support.apple.com/kb/HT4085

Informatica 9 download and installation process on windows 7 pro. 64 bit

Hi All,
Would like to download and install informatica 9 on windows 7 professional 64 bit OS.I have gone through all community posts and discussion over here and have a done a lot google search.But the same download files are not available currently in oracle site guess it used to get update as per the market availabilty.
e:g community discussion.https://community.informatica.com/message/91640
Can someone please help me out to the steps to download (exact files including licenses files) and installation steps.
Regards,
Bikash

Logon to edelivery.oracle.com
and then select Business Intelligent and then download Powercenter with DAC 9.1
follow the same steps what you found on net for installation
if helps mark
~ http://cool-bi.com

I'm having problems upgrading from 10.6.8 to Yosemite. My computer locks up after the download and installation process. Does anyone know how I can overcome this problem?

I'm having problems upgrading from 10.6.8 to Yosemite. My computer locks up after the download and installation process. Does anyone know how I can overcome this problem?

Repair the Hard Drive and Permissions
Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.

How to add NI VI's in a executable and installer

I have a working program made in Labview, but I have problems withy creating an executable and installer.
The first thing I did was create a project, I have the Main program and under the Dependencies I have the Vi's and the VI.lib from labview 8.6 directory.
I made an executable and after that an Installer. But when I run the installer version it's missing some Vi's.
These Vi's arer mainly the VI's that come from the vi.lib from the LAbview 8.6 directory. Some how these Vi's aren't taken into the executable and installer.
What am I doing wrong????
Kind regards,
Barry Bomer

Hi Bomer,
normally all vi's you need are automatically in the executable. Do you use some dynamic called vi's, maybe the report generation toolkit?
Mike
Message Edited by MikeS81 on 01-15-2009 09:27 AM

Logic Pro x - additional content downloads and installs but it won't show up in my Logic Pro X. Where is the add'l content downloaded and how do I activate on Logic Pro X?

The additional content downloads and installs, but it won't show up in my Logic Pro X. I cannot find the "Library" folder where this additional content is downloaded to and can't seem to activate the new loops and instruments in my Logic Pro X (i.e. loops are still greyed out). Any solutions?

similar problem that I'm hoping revives this thread. Took over 24hrs to dload additional content (after another full day for the actual problem) due to a bad dload rate. so quitted, and relocated closer to my wifi router. Restart, open logic x, Menu bar: Logic Pro/ Download Additional content ...Tells me i have no internet connection.... Ahh... I do, I'm using it right now! Tried restarting and relaunching. same thing every time.
Any clues?
This whole apple upgrade has been so disappointing! All i wanted to do was reinstall logic 9! $2500 later and I'm still struggling. ***!

I created a publisher file, saved it as a pdf. The problem is I created it landscape and it only shows portrait cutting the sides off my document.

I created a publisher file, saved it as a pdf. The problem is I created it landscape and it only shows portrait cutting the sides off my document.

Sounds as if you used Microsoft software to make a PDF. If so, and you didn't use Adobe Acrobat ($$), then you need to get help with Publisher -- Adobe Reader only shows what you make.

GRC 10.0 Landscape and installation

Similar Messages

Maybe you are looking for