GRC 10 + CUA + GRC 5.3 on one server?
Hi Experts,
currently we have a Netweaver system running GRC10 and we have also CUA activated.
We want to migrate one older GRC 5.3 system on the same server.
In the note 1590030 it is being said that as of SP04 you can theoretically have a GRC5.3 and a GRC10 running in parallel. But only on the backend systems side. What if you have GRC 5.3 and GRC10 running on the same server where CUA is configured ? Is this possible?
does anyone ever tried this?
thanks in advance
david
Hi Faisal
eventually we will migrate the GRC 5.3 to GRC10, but for the moment we need both systems to run in parallel on one server. In the moment they run on different servers.
Thanks,david
Similar Messages
-
GRC NFe 2.0 20 - Serviço de assinatura digital não acessível
Senhores,
Encontrei diversos post sobre esse problema, porem nenhum específico para o meu problema.
Meu landscape é ECC 6.0 700 SP 22 (SAP_APPL 603 - SP 6 - SAPKH60306) -> GRC/PI SAP NetWeaver 7.0 (SLL-NFE - Release 100 - SP 0015/SAP_ABA - 700 SP 22).
Apliquei inumeras notas no ECC e a princípio não aparece nenhum erro na j1bnfe nem na sxi_monitor do PI. Porem no monitor web GRC aparece a mensagem: 20 - Serviço de assinatura digital não acessível.
Realizei testes na SM59 e todas as RFC comunicam sem problemas e na db97 estão apontados corretamente.
Gostaria de saber se pode ser problemas de SP do GRC ou alguma outra coisa.
Obrigado!Henrique, muito obrigado pela atenção.
Acabei de aplicar a nota "0001498700 Problem on signing NF-e" e o problema mudou. Agora ja temos a mensagem no sxi_monitor e o erro no Monitor GRC ja é outro. Passa a ser "Problemas de processamento PI" e na mensagem do sxmb_moni conta a mensagem:
SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>XIAdapter</SAP:Category>
<SAP:Code area="BPE_ADAPTER">MESSAGE_NOT_USED</SAP:Code>
<SAP:P1 />
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>Message interface is not used by this process</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
Para a interface: SIGNN_SignNFe_OB. Vou tentar apagar e criar o cenário novamente, porem se souberes de alguma nota ou correção para isso, seria muito bom.
Sobre a atualização de SP, devido ao curtíssimo prazo do projeto (7 dias para atualizar 1.0 para 2.0) estamos tendando buscar outras soluções, como por exemplo aplicação de notas em separado, se tiveres uma lista das que eu vou precisar seria muito bom... Obrigado! -
RE: How to have multiple application running under one server
I have one server
I have many application
Question: Is it possible for me to have a weblogic properties file under each
of this application.
If your question is whether you can run multiple instances of WebLogic
(or multiple applications) on one server, the answer is yes. The only
problem is, you must have a unique port for each of the servers to run
on. I.e., they can not all run under port 80 which has obvious
internet/network implications.
This also means you have multiple weblogic.properties files etc. for
each instance.
We do this with WL5.1 on a Linux 2.4 kernel in developement to allow
multiple developers run their own instance on one box.
Dano
Mettu Kumar <[email protected]> wrote in message news:<[email protected]>...
> No if you are running single instance of wls.
>
> Kumar.
>
> Sonny wrote:
>
> > I have one server
> > I have many application
> > Question: Is it possible for me to have a weblogic properties file under each
> > of this application.
-
How can I move the ODI Work Repository from one server to another server?
How can I move the ODI Work Repository from one server to another server?
Hi,
If you would like to move your source models, target models and project contents from Work repository 1 to another work repository.
I.e. Dev. server to Prod Server.
1. Firstly, replicate the master repository connections i.e. with same naming conventions manually
2. Go to Dev. Server work repository -> File Tab -> Click on Export work repository (save it in a folder)
3. After exporting, you can view the xml files in the folders.
4. Now, Open the Prod. server and make sure you already replicated mas. rep. details.
5. Now, right click on model and import source model in synonym mode insert_update (select source model from the folder where your xml file located)
6. Similarily, import again target then Project.
Now, check. It should work.
Thank you. -
I would like to have 2 seperate sites on one server
Hi to all,
I am a graphic designer who sometimes uses iweb to create very simple sites, which have worked in the past.
I have a friend who is opening a restaurant and I want to help out by creating a web site for her in iweb.
She already has one "site" for her photography, which is a page that says under contruction on her FTP which is contained the index.html file that appears in the web file on the FTP. If I publish the restaurant site to her FTP it replaces this existing photography site's index.html file and her photography site is lost . Is it possible (and how??) to have 2 index.html files on the FTP so that 2 sites can exist together?
I really hope someone can help with this...
Thanks in advance,
LisaAssuming just one server domain, the sites can co-exist because each is in its own folder, but you can only have one index.html file at root level. This file redirect to the site which is at the top of the list if you have two sites in the same iWeb, or to the site which updated last if you are using separate computers.
The point of an index.html file is that you don't have to state it - if you have one at fred.com/index.html then just fred.com will bring it up.
So: supposing you have two sites at fred.com, one called jim and the other called mary. Each lives in its own folder, so their respective URLs are fred.com/jim and fred.com/mary (iWeb sets things so that those URLs bounce you on to Welcome.html or Home.html or whatever your starting page is called).
Whichever way you work it, those URLs will be stable. However, if you are each uploading from separate computers, just fred.com will lead to whichever site was updated last. The only workarounds are manually to remove the index.html file at root level and stick with the longer URL in each case: or for the second site to keep a copy of the first site's index.html file and manually replace it at root level after each time they've uploaded.
In the event that your server supports subdomains, Ethmoid's suggestion is neater. -
How to copy procedures and packages from one server to another?
Hi,
I have 439 packages and 178 procedures located in one server called MAXWELL.
I need to copy these objects to another server called TITAN.
The schema names is SPCBR in both servers.
So both servers have an instance running with this schema SPCBR.
SPCBR in TITAN server has their tables with table data which was generated by an export/import process from MAXWELL server.
However, procedures and packages were not copied by the export/import because I used the clause 'tables'.
Now, what can I do in order to equalize procedures and packages in both databases? I can't risk in damaging or duplicating data in my database located in TITAN server, ok?
Thanks,Another simple alternative, according to AskTom (http://asktom.oracle.com/pls/ask/f?p=4950:8:::::F4950_P8_DISPLAYID:454220160386)
---------------- getcode.sql ----------------------------
set feedback off
set heading off
set termout off
set linesize 1000
set trimspool on
set verify off
spool &1..sql
prompt set define off
select decode( type||'-'||to_char(line,'fm99999'),
'PACKAGE BODY-1', '/'||chr(10),
null) ||
decode(line,1,'create or replace ', '' ) ||
text text
from user_source
where name = upper('&&1')
order by type, line;
prompt /
prompt set define on
spool off
set feedback on
set heading on
set termout on
set linesize 100
------------------- eof --------------------------------
it extracts one procedure, function or package to a file. Thats it. If you
wanted to get all of the procedures in a schema extracted to the current working
directory, you would run a script:
--------------- getallcode ---------------------------
set termout off
set heading off
set feedback off
set linesize 50
spool xtmpx.sql
select '@getcode ' || object_name
from user_objects
where object_type in ( 'PROCEDURE', 'FUNCTION', 'PACKAGE' )
spool off
spool getallcode_INSTALL.sql
select '@' || object_name
from user_objects
where object_type in ( 'PROCEDURE', 'FUNCTION', 'PACKAGE' )
spool off
set heading on
set feedback on
set linesize 130
set termout on
@xtmpx.sql
---------------- eof ---------------------------------
You can see how to filter on that one by adding to the where clause if you want.
Just run @getallcode_INSTALL to run all of the scripts... -
How to setup three SharePoint sites on one server?
Hello,
How to setup three SharePoint sites on one server? I have three sites like:
http://site1
http://site2
http://site3
And need to have them running up on one server. I recall some changes need to be done to the host file, but not sure. Can you advise on what to change?
Thanks,
Paul
Paulyou need to make entries in DNS to get this done.
check here:http://spshare.blogspot.com/2012/05/how-to-create-host-header-web.html
nice blog with step by step explanation:
http://thuansoldier.net/?p=1323
Please remember to mark your question as answered &Vote helpful,if this solves/helps your problem. ****************************************************************************************** Thanks -WS MCITP(SharePoint 2010, 2013) Blog: http://wscheema.com/blog -
Running APEX 3.1.2 and 4.0.2 on one server
We currently have a Solaris server running an Oracle 10g R2 DB with APEX 3.1.2 installed. Oracle Application Server 10g (Apache) is used as HTTP server. This server is used for development and UAT.
We want to upgrade to APEX 4.0.2. and first want to test this and then gradually upgrade our existing APEX applications. This means we need to run both APEX versions is parallel for a while. We created a copy of the development database, since you cannot have two different APEX versions in one database. But, out problem is the images directory that is used by APEX 3 and 4 in combination with the OAS MT. According to the installation/upgrade instructions you need to rename the existing APEX 3 images to be able to revert back to APEX 3, but that would mean our APEX 3 environments will stop working. We need to be able to run both APEX versions for a while on one server using one OAS MT.
How can this be achieved without having to install another OAS MT with it's own images directory?Hi,
you could create a second directory on the server and a matching alias in the dads.conf file and name it /i402/ (instead of the old /i/).
Then you install APEX 4.0.2 and specify /i402/ as image directory name when calling the installation script. If you already installed APEX 4 you can use a script named reset_image_prefix.sql to change the images directory used by the APEX Builder Applications.
For your created Applications simply set the image directory prefix in the Application Definition Page to /i402/ and you are good to go.
brgds,
Peter
Blog: http://www.oracle-and-apex.com
ApexLib: http://apexlib.oracleapex.info
BuilderPlugin: http://builderplugin.oracleapex.info
Work: http://www.click-click.at -
MAXDB copy log file from one server to the other server.
Hi All,
I want to copy a log file from one server to the other server , the database is Maxdb and i don't know how to do it. I want to do it through command prompt, (set of commands required) the front end tool which we are using is DBM ( database manager). Please help.
Regards
M.AHi,
Basically, the process is of log shipping. Transferring logs from DC to DR system.
For that, you can check HowTo - Standby DB log shipping - MaxDB - SCN Wiki
This is script based. I have not done it but the idea remains the same.
Regards,
Divyanshu -
SUBMIT works in one server and fails in another!!
Dear All,
I have the following SUBMIT statement that works in one server perfectly and fails in another with SY-SUBRC 8 [ Error in job scheduling (JOB_SUBMIT) ].
SUBMIT riaufk20 EXPORTING LIST TO MEMORY AND RETURN WITH SELECTION-TABLE seltab.
Below is the entire program. Any idea why this is happening ?
Thanks in advance,
Rajesh
""Local interface:
*" IMPORTING
*" VALUE(P_AUART) LIKE DIAUFK-AUART
*" TABLES
*" T_OUTPUT STRUCTURE ZLINE
DATA: i_list LIKE abaplist OCCURS 0 WITH HEADER LINE.
DATA: BEGIN OF i_list_conv OCCURS 1,
line(256),
END OF i_list_conv.
DATA: BEGIN OF i_order OCCURS 0,
aufnr LIKE aufk-aufnr,
END OF i_order.
DATA: seltab TYPE TABLE OF rsparams,
seltab_wa LIKE LINE OF seltab.
RANGES: r_aufnr FOR aufk-aufnr.
DATA: v_lines TYPE i.
MOVE: 'AUART' TO seltab_wa-selname,
'S' TO seltab_wa-kind, " SELECT-OPTION
'I' TO seltab_wa-sign,
'EQ' TO seltab_wa-option,
p_auart TO seltab_wa-low,
' ' TO seltab_wa-high.
APPEND seltab_wa TO seltab.
SUBMIT riaufk20 EXPORTING LIST TO MEMORY AND RETURN WITH SELECTION-TABLE seltab.
CALL FUNCTION 'LIST_FROM_MEMORY'
TABLES
listobject = i_list
EXCEPTIONS
not_found = 1
OTHERS = 2.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
CALL FUNCTION 'LIST_TO_ASCI'
EXPORTING
LIST_INDEX = -1
WITH_LINE_BREAK = ' '
IMPORTING
LIST_STRING_ASCII =
TABLES
listasci = i_list_conv
listobject = i_list
EXCEPTIONS
empty_list = 1
list_index_invalid = 2
OTHERS = 3
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
DATA: v_text1(20).
LOOP AT i_list_conv.
IF sy-tabix GT 3.
SPLIT i_list_conv-line AT '|' INTO v_text1 i_list_conv-line.
SPLIT i_list_conv-line AT '|' INTO v_text1 i_list_conv-line.
SPLIT i_list_conv-line AT '|' INTO i_order-aufnr i_list_conv-line.
APPEND i_order.
CLEAR i_order.
ENDIF.
ENDLOOP.
DESCRIBE TABLE i_order LINES v_lines.
DELETE i_order INDEX v_lines.
REFRESH seltab.
CLEAR seltab_wa.
REFRESH i_list.
REFRESH i_list_conv.
SORT i_order.
LOOP AT i_order.
MOVE: 'AUFNR' TO seltab_wa-selname,
'S' TO seltab_wa-kind, " SELECT-OPTION
'I' TO seltab_wa-sign,
'EQ' TO seltab_wa-option,
i_order-aufnr TO seltab_wa-low,
' ' TO seltab_wa-high.
APPEND seltab_wa TO seltab.
ENDLOOP.
SUBMIT riafvc20 WITH SELECTION-TABLE seltab EXPORTING LIST TO MEMORY AND RETURN VIA SELECTION-SCREEN.
CALL FUNCTION 'LIST_FROM_MEMORY'
TABLES
listobject = i_list
EXCEPTIONS
not_found = 1
OTHERS = 2.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
CALL FUNCTION 'LIST_TO_ASCI'
EXPORTING
LIST_INDEX = -1
WITH_LINE_BREAK = ' '
IMPORTING
LIST_STRING_ASCII =
TABLES
listasci = i_list_conv
listobject = i_list
EXCEPTIONS
empty_list = 1
list_index_invalid = 2
OTHERS = 3
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
t_output[] = i_list_conv[].
ENDFUNCTION.Rajesh,
Whatever parameters you are using in submit statement check those things are available in other server or not.
Regards, -
How do I install multiple KMS keys on one server?
I currently am working at Phelps County Regional Medical Center in Rolla, MO and my question is: How do I install multiple KMS keys onto one server? This is very urgent and I have the KMS activating Windows 7 but, I also need all my Office keys, Windows
8, and Windows 8.1 to be activated via KMS. the current KMS is a Windows Server 2008 R2 server. Please help me out and thank you for your time! :)you need to apply the following update (http://support.microsoft.com/kb/2885698)to your KMS server so you can license up to Windows 8.1. From there your key for 8.1/2012R2 will license everything
downwards and then you can also install your Office KMS key without issue. If its Office 2013 then you need to download the files here (http://www.microsoft.com/en-us/download/details.aspx?id=35584)
Be kind and Mark as Answer if I helped. -
Multiple users logged into one server, each users printer has a different name, application needs ONE name to print to.
I'm NOT in any way a Terminal Services expert and I need help trying to get an application program working in a multi-user environment.
The issue is that the printer changes for every user that is logged in. The application needs to print NOT to the default printer, but to a "special" printer which is selected in the application... let's call it a label printer to simplify the explanation.
You have your default regular printer, easy for the application to find that one, and then you have a special printer that labels get printed onto. The application needs to know what printer is the label printer. So we allow the user to select that in the
application and the selection is stored in a config file in
C:\ProgramData\mfgr\prog\setting files
I don't have access to the application so I can't change how this works.
In the "regular" world, selecting the label printer driver to use should be per machine, NOT per user. When a new user logs into a machine, the physical printer doesn't go "poof" and a new printer suddenly appear. Same printer for all
users.
Yet in terminal services, the physical machine is "merged" with the virtual machine on the server. And there can be many users logged in at the same time. So each users real machine (and real printer) is injected into the "fake" terminal
services machine. The name of the printers is made unique for each user. So the printers DO go "poof" and change names depending on the user logged into terminal services.
So user "A" logs in and sets up the application to print to "LabelPrinterForUserA" (or whatever the name of the printer happens to be), that setting is stored in the ProgramData subfolder, and all is well. Later, user "B" logs
in, and when they print, the application tries to print to "LabelPrinterForUserA" which doesn't exist for user B or is only accessible by user A. If user B re-configures, that breaks it for user A.
SOLUTION 1: The way that /should/ work (in my mind) is that you define one "generic" printer in Terminal Services... call it "Virtual Label printer" and when the user wants to print to it, the print job gets re-directed back to whatever
physical printer is actually connected to their local workstation. There is a map of virtual printer to actual printer depending on the current user. The application is told once to print to "Virtual Label Printer" for all users.
SOLUTION 2: Or... there should be some way to make the ProgramData sub folders separate per user. E.g. when user "A" tries to access:
C:\ProgramData\mfgr\prog\setting files
they actually get
C:\UserData\UserA\AppData\mfgr\prog\setting files
and user "B" gets
C:\UserData\UserB\AppData\mfgr\prog\setting files
So the question I have is: Does either of those solutions exist hidden somewhere in the setup of terminal server? Or is there another way around this issue that I don't know?I don't really have a "for sure" answer to this, but because people here can't seem to deal with a question that hasn't been answered I'll provide the best answer I did receive from ServerFault.com user Nathan:
I can feel your pain with using old software on terminal servers ...the solution I've come up with definitely won't scale as it requires some manual configuration, but I've gotten this method to work with our label printers (which require to be
printed to an LPT port...yep, that old).
Share your USB-connected printers to the network on each machine. Then, have the user log in on aunique session for each of them
(a TS account cannot be shared among computers for this to work) and install a network printer pointing to the USB one they shared. Try to use a DNS name to account for possible DHCP movements.
After, it should work. Each user can do this since display names can be identical as long as the ports are different (which they are).
This was clarified by the following series of comments:
I think you are on to something here, and I originally advised the admin to do this. The problem he ran into is that it setup the printer names in the TS as "printer on usersworkstation"
and he could not rename it except to change the "printer" to whatever. E.g. the "on userworkstation" remained. I believe there is another way of installing the printer which avoids this, but I can't find it. Ages ago, one used to do NET
USE LPT2 \\computer\printer password /USER:domain\user /PERSISTENT:YES and then tell the driver to print to LPT2 – James
Newton Mar
17 at 16:21
@JamesNewton That's actually the exact method we used. The way around the "network printer" part is to install it as local printer and map it to a TCP/IP port that way. – Nathan
C Mar
17 at 16:28
You mean in the case where the printers are TCP/IP connected and not local USB / LPT to the users workstation? That makes sense. Wonder if this will work for USB connected printers... – James
NewtonMar
17 at 16:35
@JamesNewton You'd share the local printer on the client's PC then on the server connect via TCP/IP to it. You'd need static addresses or use DNS names if DHCP, though. – Nathan
C Mar
17 at 16:51
Ah. Yes. I see. Looks like the LPT thing should work even with a USB connected printer:superuser.com/questions/182655/… – James
Newton Mar
17 at 17:09 -
Multiple instances of ECM 11g on one server
I've read a few posts about installing multiple instances of ECM 11g on one server, but I have a few questions. My current set up is
A single Windows 2008 Server R2 server
8 gb RAM
Weblogic 10.3.5
1 install of ECM 11g in the base_domain
Database is Oracle 11.2
I want to add another instance of ECM to this server, but when I went to run the RCU, I was not allowed to use the same prefix for my tablespaces. Is this expected? I'm fine with using a different prefix, I just was surprised to see that I couldn't use the same prefix on this install since I was using a completely different database.
Assuming I use a different prefix... do I just add a new domain for this additional ECM instance? Is there anything else I need to know?
Thank youI went to run the RCU, I was not allowed to use the same prefix for my tablespaces. Is this expected?Yes. It will create tables with the same name visible for a different database user (thus, the prefix).
do I just add a new domain for this additional ECM instance? Is there anything else I need to know?Actually, I think you can even install more instances to the same domain (this is more a question to Weblogic Server admins - I think there's been some posts recently on this topic). What definitely must be unique, is the port number. If you are OK with using different port numbers for your instances, it should be relatively easy. If you need the same port (e.g. 80 because of proxy limits), there are some ways how to redirect - it that case, two domains might be required. -
Restored our SSRS 2008 R2 from one server to another; Dates are in UK format and not US
We have restored our SSRS 2008 R2 from one server to another. The original server was in US locale/culture. The new server was in UK locale/culture, when the restore happened. However it should have been in US locale/culture. We have made this change and
new reports work OK.
However existing reports (i.e. saved by a user) are still trying to use the US dates in a UK format and as a result throwing a date cant be below 1753 error.
Has anyone seen this issue before or have any idea what we need to do to fix it?
Thanks
KimberladHi Kimberlad
Have you checked any changes in the Collation?
Please verify Reporting Server Databases and Server Collation is there any mismatch with your Source Server.
and also please post complete Error message..
Nag Pal MCTS/MCITP (SQL Server 2005/2008) :: Please Mark Answer/vote if it is helpful :: -
Hi,how can i transport objects from one server to other like (Dev To Qty)
Hi Sir/madam,
Can u explain how can i transport objects from one server to other like (Development To Quality To Production).
Regards,
Vishali.Hi Vishali,
Step 1: Collect all Transports(with Packages) in Transports Tab(RSA1)- CTO
Step 2: Release the subrequests first and then the main request by pressing Truck button
Step 3: STMS or Customized transactions
Object Collection In Transports:
The respective Transports should have the following objects:
1. Base Objects -
a. Info Area
b. Info object catalogs
c. Info Objects
2. Info Providers u2013
a. Info Cubes
b. Multi Providers
c. Info Sets
d. Data Store Objects
e. Info Cube Aggregates
3. Transfer Rules u2013
a. Application Components
b. Communication Structure
c. Data Source replica
d. Info Packages
e. Transfer Rules
f. Transformations
g. Info Source Transaction data
h. Transfer Structure
i. Data sources (Active version)
j. Routines & BW Formulas used in the Transfer routines
k. Extract Structures
l. (Note) If the transfer structures and related objects are being transferred without preceding
Base Objects transport (e.g. while fixing an error) it is safer to transport the related Info
Objects as well.
4. Update Rules u2013
a. Update rules
b. Routines and formulas used in Update rules
c. DTPs
5. Process Chains u2013
a. Process Chains
b. Process Chain Starter
c. Process Variants
d. Event u2013 Administration Chains
6. Report Objects u2013
a. Reports
b. Report Objects
c. Web Templates
Regards,
Suman
Maybe you are looking for
-
I am trying to figure out how to efficiently copy a contact so I can add the contact information to an email. While experimenting I unchecked the menu bar or the tool bar from my address book and now I can't figure out how to get it back. So you coul
-
Unable to use wi-fi or bluetooth on my iphone 4s
unable to use wi-fi or bluetooth on my iphone 4s
-
Unknown Error 50 won't let me access iTunes, what's going on?
Whenever I launch iTunes a box shows up saying "We could not complete your iTunes Store request. The network connection was refused." and "Make sure your network settings are correct and your network connection is active, then try again.". My interne
-
IWeb 08 crashes when publishing to folder
I've used iWeb from iLife 06 for a while now without any issues and upgraded to iLife 08 tonight. Unfortunately, when I go to publish my iWeb site to folder, it comes up with an "unknown error". Any idea what I could be doing wrong?
-
Is this method good or I need to use another way
I am making designing and developing my report in Report Builder 3.0 and by using this method http://technet.microsoft.com/en-us/library/aa337089.aspx I am showing the report in Windows Form. I want to know is this a right way or I have to use any ot