Greater than equal symbol are coming across as question mark

Hi:
Greater than equal symbols and Less than equal symbols are coming across as question marks in Jasper Reports. Do you have any suggestions of how to solve this?

This is the same problem as your other thread, keep it in one thread please:
http://forum.java.sun.com/thread.jspa?threadID=5194766

Similar Messages

  • Every once in a while when I open my mail or a page I get nothing but strange lines of symbols.  Many of the symbols are black triangles with question marks in the center.  I completely reset it like new, but problem still exists

    Every once in a while when I open my mail or open a page I get lines of strange symbols like black triangles with question marks in the center.  I have reset the ipad2 to new condition but the problem still exists.

    A reset does not make tthe iPad "like new."
    First, let's ensure that we agree on just what is a Reset...
    Hold down the on/off switch and the Home button simultaneously until you see the Apple logo.  Ignore the "Slide to power off" text if it appears.  You will not lose any apps, data, music, movies, settings, etc.
    If the Reset doesn't work, try a Restore.  Note that it's nowhere near as quick as a Reset.  Connect via cable to the computer that you use for sync.  From iTunes, select the iPad/iPod and then select the Summary tab.  Follow directions for Restore and be sure to say "yes" to the backup.  You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod.  Again, say "yes."
    At the end of the basic Restore, you will be asked if you wish to sync the iPad/iPod.  As before, say "yes."  Note that that sync selection will disappear and the Restore will end if you do not respond within a reasonable time.  If that happens, only the apps that are part of the IOS will appear on your device.  Corrective action is simple -  choose manual "Sync" from the bottom right of iTunes.
    If you're unable to do the Restore, go into Recovery Mode per the instructions here.

  • TradeMark Symbol and Registered Symbol are being replaced by question marks

    Hello Everyone,
    I am using RTF template to generate report in PDF, otherwise "Trademark and Registered" symbols from the field data are being replace by "question marks".
    Any suggestions please.
    Regards
    Charan

    Hi Tim,
    I followed the steps to map external font from this link
    http://www.oracle.com/technology/products/xml-publisher/demoshelf/shelf.html
    Actually, i am not able to find the font name for these kind of symbols (like trade mark or Registered) and also, i am fetching the data from database and them printing on PDF (like a standard process). This trademark symbol is in database.
    Regards
    Charan

  • What are these blue box question marks?

    What are these blue box question marks appearing on some websites?
    They seem to not appear on every website I visit, only some.
    I have tried several troubleshooting steps.
    -I reset cache.
    -I changed text encoding.
    -I checked bos to always display images.
    -I went to "develop" and opened in every other browser.
    -I updated my adobe flash player.
    What else can I do?
    It is so annoying!
    I am running Safari 8.0.
    Thank you!

    Here is a screenshot of the page:

  • My emails are received with inexplicable question marks for spaces

    My emails are received with inexplicable question marks for spaces. This seems to only happen on some computers. Help!
    Mac Mini   Mac OS X (10.4.4)  

    I was looking over the help that you gave about the question marks in email responces, and wondered if you knew anything about fractions in the mail info.
    When I get mail on my power book, the information as to whom it from and date etc. is all fractions. This is also happening in my address book. I've tried changing fonts to see it that was the problem and it hasn't seemed to work. Any other ideas?

  • Hash,Not assined ans / symbols are coming-Urjent

    Hi all,
    we have created a test query at ODS level.When I am executing a report the values are coming hash or hasth vaue.
    Plz refer the ex  below
    fo G/L Account  the value  is showing as :
    #/1000018910  like this is coming.
    Please suggest us how to rectify  these values.
    Regards
    Ajay

    Any report showing a value such as:
    / abc or # / 12345
    Indicated compounded infoobjects are being shown e.g. fiscal year/period, cost centre, ...and the field being compounded with is either missing or has value blank/hash.
    One you have filled in the field being compounded with then then this value will also show - unless the report is limited to a single value for the compounding field. 
    For example if "CA01" is you chart of accounts the account 123456 in chart of account CA01 would appear as:
    CA01 / 123456
    unless :
    a) the query is limited to only chart of accounts CA01
    b) chart of accounts is present in the report as a column
    If either of these are true the account would appear as:
    123456

  • Pictures on internet coming up as question marks

    PLEASE HELP....I recently purchased a Macbook Pro and am having trouble viewing pictures online. I am a college student and a frequent visitor of Facebook and Myspace. However, I am unable to view web pages and pictures on these sites. Pictures show as blue question marks and background on webpage doesn't show at all!! I use these sites to keep in touch with family, friends, and ex co-workers. Please help.

    Are you using an adblocker?
    Go to Safari Preferences and check the box "Display images when the page opens"
    Other than that, the only thing I can tell you is refresh the pages to see if the image comes up, use a different browser and see if the images show up, or take it into an Apple store and ask one of the employees there.

  • Images coming up as question marks when scanned?

    Since I've upgraded to Yosemite, my images can't be scanned. The printer/scanner/copier shows up fine and connects to the computer fine, my problem is that -- once scanned -- the image shows up in the "Image Garden" as a grey field with a question mark in the center. It can't be opened, can't be saved, and can't be transfered to another application to view it. I've messed around with the scanner settings, trying to save photos as different formats (PDF/JPG/PNG/TIFF/RTF/etc) but to no avail. I had luck saving one image as a PDF but then cannot open it to use it for anything outside of the "Image Garden" viewing. All other applications say the images cannot be uploaded because they are not in a recognized format, even though the name is followed with something like .pdf. What am I missing here, and how do I fix it? I can't seem to find anything on the help site advising what to do. Thanks so much.

    Dear katiegrant,
    You can contact Canon support. They will have a solution to your issue:
    http://www.canon.com/support/
    I hope you find it helpful.
    Greetings.
    * I am not an employee of HP, my work is voluntary.
    If this answer was helpful and clarify or resolve your problem, please mark the issue as resolved and click my star next to give a kudo as thanks.
    I am not an employee of HP, my work is voluntary. If this answer has been helpful and clarifies or solves your problem, please click the button
    and click on the icon if you want acknowledge the assistance.

  • Craigsphone app pictures are blue boxes with question marks?

    When I use the Craigsphone app for my iPhone, the images are now blue boxes with question marks.  The pictures used to show up fine, but now don't.  Is there a setting somewhere I need to change and if so, where is it?  I've been through my phone and can't figure it out.  I've also restarted and restored my phone and that hasn't worked.
    Thanks in advance!

    I am also running into this problem. net every picture doesn't show though, just maybe three quarters worth.

  • Greater than Equal to Functionality when retirivng data from SSAS 2008 cube using SSRS 2012 report not working

    I have an SSRS 2012 report and SSAS Cube in 2008. My report criterion requires filtering on measures. So Created measures as dimensions . The report requires >= functionality on the measures. But in the Query designer of 
    the report there is =, IN, Within Range ,Excluding range , MDX as the operators.
    To achieve my goal. I have “From” and “To” as parameters on the numeric dimension. The “To” parameter I have set as internal and setting
     the default value of  “TO” .By writing another Dataset query that returns the “MAX” 
    value and the MAX value returned is a member of the measure converted to dim I confirmed.. So this whole works as >=.The user enters only the “FROM” parameter and the “TO” is set internally. The user can enter any value in the “From” parameter. Any
    value that is not even a member.It is a textbox. I cannot use a list of values from the “From” parameter.
    But whenever I run the report after entering all the selection criteria
     I keep getting
    Error “the restrictions imposed by the constrained flag in the strtomember functions were violated”
    I know this means that Max value in the “TO” section is not a member .
    I did try
    : StrToMember("[Fact RCS CV BLAST].[APPRLIMIT ACH].
    &[" & @ToFactRCSCVBLASTAPPRLIMITACH &
    "]", CONSTRAINED) )
     But I get “syntax for the “&” is incorrect”
    If I use Drop down for the “From” and “To” parameters then it works fine. But that’s not what Business Users need.
    Please let me know what the options to make this work. I did use parameters that filter the
     Dataset returned it works fine but there is a performance impact.

    Hi,
    I think if you use the following method you will be able to compare the members.
    CDbl(StrToMember("[Fact RCS CV BLAST].[APPRLIMIT ACH].&[" + @ToFactRCSCVBLASTAPPRLIMITACH + "]").Member_Name)
    As you mentioned that you converted your measures as dimensions, you are having an integer value as the member name. In that case use VBA functions with MDX to do the datatype conversion.
    Take a look into the following MDX written against Adventure Works;
    WITH CALCULATED MEMBER [Measures].[Member Name] AS
    CInt
    Right
    CStr
    [Date].[Calendar Year].CURRENTMEMBER.MEMBER_NAME
    ), 4
    SELECT {[Measures].[Sales Amount], [Measures].[Member Name]} ON COLUMNS,
    FILTER
    [Date].[Calendar Year].[Calendar Year].MEMBERS,
    CInt(Right(CStr([Date].[Calendar Year].CURRENTMEMBER.MEMBER_NAME), 4)) >= 2005 AND
    CInt(Right(CStr([Date].[Calendar Year].CURRENTMEMBER.MEMBER_NAME), 4)) <=2008
    } ON ROWS
    FROM [Adventure Works]
    I am filtering the Years by using the member names by extracting the Integer portion of the member name and applying data type conversion functions in VBA. So I 
    Keep in mind that you have to get rid of the CONSTRAINED clause if your business users can enter anything on the SSRS text box. 

  • Documents in my dock are showing up as question marks and I cannot open... please help!!

    I save several excel documents on my dock.  Today I went to open one of the documents and the files were showing up in my dock as gray question marks.  I am unable to open the documents or find them anywhere else on my computer!  Please help!!

    That may result in losing Dock icons for the Office applications (don't know why it should?) but shouldn't cause document icons in the Dock to disappear.

  • I am getting  blank screen with the symbol for files and a question mark on top of it on my imac. How do i resolve this?

    When I start up my iMac, I get this blank screen with a flashing ? (question mar). how do I resolve this?

    abhayakumar wrote:
    Here's what I did. I pressed options moment I powered on the iMAC and it started up.
    The blinking folder + ? means that the Mac can't find your startup disk. Holding option down after the chime means you're forcing the Mac to look for any version of OS X on any connected disk. If it then finds your HD and starts up, one of the following needs to be done :
    1. Verify and if necessary Repair your HD using Disk Utility
    2. Repair Permissions using Disk Utility
    3. If there is a slowly developing issue with the HD it may need to be replaced
    4. If none of the above, it could be the logic board (usually capacitors)

  • How can I write the symbol "greater or equal" in a string or a label?

    Hi,
    I have tried using the "symbol" police to create the greater or equal symbol but it doens't work.
    Does anybody know how to do this?
    Thanks,
    User
    Solved!
    Go to Solution.

    The only way I see to do it, is to type in the appropriate character code (Alt-0179, using the numeric keypad), then highlighting the single character (in most fonts it is the superscript 3), then changing the font to 'Symbol'.  The rest of the characters in the string will remain in the same font as before, only the highlighted character will change.
    Randall Pursley

  • Apostrophes are replaced by question marks in output string?

    Hi Guys
    I think this is an encoding problem but I cannot find it in the forum archives. My apostrophes are being replaced by question marks on my jsp output?
    Any idea why and how to get them back to apostrophes
    Cheers, ADC

    Guys, the 3rd party product has no trouble at all
    showing the apostrophes from the self-same database
    that I get question marks from.
    This MUST be an encoding issue, so anyone that knows
    about encoding and changing it please could you
    suggest something. You can take for granted that one
    way or another the character in the database IS an
    apostrophe as verified by viewing it via the 3rd party
    product we have.You said...
    In the SQL database view they come out as squares
    Were you referring to the normal applications that are available for viewing data for the database (like SQL*Plus or Enterprise Manager?)
    If yes, then if it was me then I would presume it was not an apostrophe and that the third party tool was mapping the real character to an apostrophe. A 'square' indicates an unusual character in viewers.
    Are you using EBCDIC? Unless EBCDIC is involved apostrophe has the same value in most if not all character sets because ANSI forms the lower range for most character sets. I know for example that Korean, Japanese and Chinese character sets use ANSI, as does unicode (with padded zeros for the wider ranges.)

  • Why all of a sudden are my images missing and have question marks

    Hi Guys,
    Really irritating thing has started to happen when I use pages. I start my document as usual, drag and drop images into it then save. When I try to resave it complains of not being able to save the document. I then save as another file name, try to reopen and all my images are now boxes with question marks on them. I havent moved any folders or anything. Its only recently started doing this. I'm on Pages 4.1.
    Can anyone help me please?
    many thanks
    HM

    Look at my points mate!
    1 in 7 people here bother thanking us for helping them, so the points don't really reflect how much work we put into answering their problems.
    Some even provide basic information to help resolve their own issues. Some are like the Korean lady who asked me to set up a Korean DTP system for her years ago. It was obvious that she wasn't giving me all the disks necessary for the Korean installion, grudgingly I dragged them out of her one by one.
    I remember looking her in the eyes and wondering exactly what was going on in her mind, I knew one of us wanted to get the job done and go home. Still a mystery to me to this day. But then she is not alone in this world.
    Peter

Maybe you are looking for