Greenish tinge, added after render..

I have a problem with a greenish color shift that takes place after render in color 1.0.1
my material was actuall digitized on a G5 with blackmagic decklink,
then media manag'ed' to apple uncompressed 8 bit 422 on an external drive
then copied to my mac pro, where I have an 8core 3.0, 4Gb, ATI X1900. and AJA Kona LHe with latest drivers...
what is going on?
why is the image different before and after render?
I work in PAL, and the material imported into color was Apple Uncompressed 422 8bit codec... and rendered out as the same 422 8bit uncompressed...
unfortunately I do not have a digibeta deck to capture material directly so I have to rely on capturing at another facility...
regards to all,
Elias.
Message was edited by: Elias H

Many many years ago I faced this problem when translating RGB/YUV back and forth in 8-bit files.
Try to use 10-bit files instead and make shure to render in color (internal pixel) using 10-bit at least.
Hope it helps.

Similar Messages

Images that zoom and move jitter after render.

I have a bunch of pictures that I put to music. Some move across the screen or zoom slowly. The images move smoothly until I render them, then it's like the images are on some bumpy path or something. They jitter or bump as they move.
I have de-interlaced the images, have changed the image formats, added max flicker filter, ensured that my render settings were at 100%, have redone the motion, have doubled the resolution of the image file (just in case the pixels were conflicting or having trouble at that resolution), and have adjusted settings in the individual item's properties.
My project was supposed to be delivered to the customer yesterday, but there's no way I'm going to deliver a jittery video. The problem is also equally noticeable on the DVD I produced . I have never had this problem in the past. Like I say, when the render bar is green, everything is smooth. After render, bumpy motion. All the motion (for the most part) is perfectly horizontal or vertical.
Any input would be greatly appreciated.
Message was edited by: Joey Delli Gatti

I had the exact same problem and was able to overcome it using a hack... this seems to be a bug in FCE.
I fixed it by rotating all my original images 90 degrees, replacing them in the timeline, rotating them back, then applying the zoom effects. They look perfect now. (Strange but true.)
Anyone with a better solution to this issue?

Updated to 7.0.6 on my iPhone 5s and now my phone is all out of whack. It won't sync the new playlists I added after the update though when it's plugged into iTunes it says it's synced. Help please!

So I updated my iPhone 5s to version 7.0.6 yesterday, and now my iPhone music isn't working properly. It won't sync the playlists that I added after the update though when it's plugged in on iTunes it says that the music is synced. When I select a song in a playlist on the phone it shuffles through the playlists for like 3 seconds and picks a totally different song to play. I tried reinstalling iTunes, I tried restoring the iPhone, is it just a bug with the update? Nothing works. Any solutions are welcome.

DFU mode? How do I do that? So far the only thing I can do is hold down both buttons to power it on and nothing is on the screen and it wont reconize on my computer....

File size extremely high for .avi after render PE 9

I'm very new to PE and have tried to learn quick to redact info (faces etc) in .avi files for a government agency. I was able to open the file (in the trial version) and make the track matte by dragging the original file to the timeline then dragging it again to the video 2 timeline for the top layer, Question 1) is this the same as copy and paste or am I doubling the size already? Anyway, I was able to get the matte and everything done. Now, to Render and save... I choose computer/avi again (I need to keep it the same) and it took 1 hr 45 min to render it, that seemed long to me but maybe not... but mainly the file size was then 100,883 kb! Starting with a 29.7 kb file. This is what my question is about....could this be right? I can't use it if this is what I get. So, here are the particulars as I got G-spot and looked it up, as per serveral suggestions I saw here. I'm trying to understand the CODEC info but I fear I have a ways to go before I can figure out what I did wrong. (This is my test computer, the future work would be done on a newer, better computer). The videos I would be working with come from various sources and will vary in length but will probably all be a kind of avi.
Intel Pentium processor 1600 mhz
221 mhz, 2.00 gb ram
Microsoft windows xp sp3
video:
length: 0:27.261
frms: 817
Kbps: 28770
pic: 720x480
codec: dvsd dvc/dy
I appreciate any help you can give

Thanks for you response and the information was very helpful. I was able to choose and output that gave me a good file size and I do want DV-AVI (I don't remember what I chose but it worked) but, I don't see an option for DV-AVI - is that a general DV output selection, because there seem to be numerous (AVCHD, NTSC, DV STANDARD) acronyms (I have tried to understand what each is) which do I want?
From: Bill Hunt <[email protected]>
To: Mid Century Modern <[email protected]>
Sent: Wednesday, September 28, 2011 6:07 PM
Subject: File size extremely high for .avi after render PE 9
Re: File size extremely high for .avi after render PE 9 created by Bill Hunt in Premiere Elements - View the full discussion
For the use of Track Matte Keying, with say a Gaussian Blur, or maybe Moasic Effect, if you have not altered the In & Out Points, then just dragging the Asset to both Video 1 and Video 2 will work fine. If you HAVE adjusted the In & Out Points, you can just click-drag from the Source Monitor, where you set those In & Out Points, and all is good. The Copy/Paste is just another way to do it.
As you are doing an "overlay," the output File Size will not be affected in any way. You are also limiting the Blur, or Effect on Video 2 to just the area "exposed" by the Track Matte, so the pixel count will not be altered.
As Steve points out, the output CODEC in the AVI will determine the output File Size. File Size is basically determined by the Timeline's Duration and by the Bit-Rate of the output file. With DV-AVI, that Bit-Rate is pretty well set, and your Timeline determines the Duration. At ~ 13GB/hour, a DV-AVI will be pretty large, but that is the nature of the beast. Also, and as Steve points out, if you are going to do additional editing, and will be Importing that file into a New Project, DV-AVI is about as good, as it gets.
Good luck,
Hunt
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/3943683#3943683
To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/3943683#3943683. In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Premiere Elements by email or at Adobe Forums
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

Why is a space always added after each img ?

Hello,
I have an input TextField, in which I want to add text and images. But each time I add a new image in the textField (via an <img> tag), a space character is added after every other <img> in the TextField. Why is that ?
You can test it for yourself :
function test():void
            var tf:TextField = new TextField();
            tf.multiline = true;
            tf.text = "Hello World";
            trace("1/ tf.length", tf.length);
            trace("1/ tf.text", tf.text);
            trace("1/ tf.text.length", tf.text.length);
            trace("1/ tf.htmlText", tf.htmlText);
            trace("1/ tf.htmlText.length", tf.htmlText.length);
            var htmlText:String = tf.htmlText;
            htmlText += "<img src='image.gif' id='0'/>";
            tf.htmlText = htmlText;
            trace("2/ tf.length", tf.length);
            trace("2/ tf.text", tf.text);
            trace("2/ tf.text.length", tf.text.length);
            trace("2/ tf.htmlText", tf.htmlText);
            trace("2/ tf.htmlText.length", tf.htmlText.length);
            htmlText = tf.htmlText;
            htmlText += "<img src='image.gif' id='1'/>";
            tf.htmlText = htmlText;
            trace("3/ tf.length", tf.length);
            trace("3/ tf.text", tf.text);
            trace("3/ tf.text.length", tf.text.length);
            trace("3/ tf.htmlText", tf.htmlText);
            trace("3/ tf.htmlText.length", tf.htmlText.length);
Before the first image, the text equals "Hello World" (as expected)
Before the second image, the text is "Hello World\r "
And after the second image, it is "Hello World\r \r "
So there are two spaces after the first image. And if you add a few images in the initial htmlText, they will have two more spaces at the end of the function.
Does anybody knows why is it, how to disable this behavior, or simply fix it ?
A big thanks to the one who can help me, I'm really stuck with this.

http://help.adobe.com/en_US/FlashPlatform/reference/actionscript/3/flash/text/TextField.ht ml#condenseWhite

CC 2014 trial. MPEG MOVIE clips flickering on my time line! after render, and after export. tried all kinds of sequence settings,taking out transitions and effects ,even the audio tracks.....still flickering. They play fine outa the project files!? HELLL

CC 2014 trial. MPEG MOVIE clips flickering on my time line! after render, and after export. tried all kinds of sequence settings,taking out transitions and effects ,even the audio tracks.....still flickering. They play fine outa the project files!? HELLLLLPPPPP!!!!

We can not see your computer, your settings or even know what your source files are because we are not in the same room as you are!
We cant see what you are doing wrong ...so you will have to tell us a lot more and show us some screen grabs of your settings.

What are "emulated" and "removable" storage directories added after 4.2.2 upgrade

Hi
I notice that in addition to the sdcard0, sdcard1 and usbdisk storage directories there are now two more added after the 4.2.2 upgrade, called emulated and removable.
Emulated has two sub-directories called O and legacy. They seem to contain virtual links to the real directories but I can't be sure.
Can anyone explain what they are and whether I need them ?

this stupid version of 4.2.2 that make some nonsence emulated storage that making ppl so troublesome!. dammit. cant even move app 2 sd card fxxx..ik

Pixles/artifacts showing up after render?

Ok. so working on final cut 7. Cannon 5d footage, hootage is in H.264 (usaly edit in pro rez, but its happening with both formats)
Using magic bullet looks to get the grain and tilt shift look, looks good before i render, but as soon as i do render...well its looks like the image below. Any ideas?
before render...
after render
after render

Hi
Me just an amateur (FCP 6.0.6) thinking.
How did You set this - I do like this
Setting it to LOW and Quater - gives me a very bad playback - BUT it doesn't halt due to loss of frames.
Yours Bengt W

When paste to vim xterm, blanks lines are added after each line

Need expert's help:
When I copy from windows Firefox to my vnc's vim xterm, somehow after each line, several blank lines are added after every single line/paragraph. This is really annoying!
I don't know how to solve it. I changed a my .vimrc to a very simple one, still not working.
thanks!
Qian

You may have a fileformat problem. I'm pretty sure this will work but I only did one small test.
To display the current vim fileformat – this should return either 'dos' or 'unix'.
:set ff
Vim usually correctly sets the fileformat automatically upon opening a file but will default to using 'unix' if the format can't be determined. After pasting the text, try the command,
:update
'update' will save the file only if changes to the buffer have occurred. This command may change the fileformat and all the line endings are now CR-LFs (CR=carriage return; LF=line feed). Check the fileformat again with
:set ff
If ':update' didn't change the line endings, or the file is now a mix of CR-LFs and LF-only line endings, try this,
:e! ++ff=dos
This should force rereading the buffer as a dos (Windows) format and properly display the lines. All line endings should now be CR-LF. You can then manually set the fileformat to 'unix' with
:set ff=unix
and finally, save the file with
:w

Extra (Duplicate) Code Added After Editing Page

At first I thought this was a problem when using templates
but I've confirmed that it's more widespread that that. I've also
found this posted a couple of times on other boards but nobody
seems to have an answer.
After I edit a page (html or php, doesn't make a difference)
in Dreamweaver 8.02 extra code is added at the bottom of the page.
This code duplicates a portion of what is already on the page, and
it appears (although I can't say for certain) that the more editing
I do the more code is added.
The extra code is added after the closing </html> tag.
Sometimes a portion of it will show up in Code view but more often
than not I have to view the page in a text editor and remove it
outside of Dreamweaver. But once the page is edited again then the
problem repeats.
Bizarre.
Thanks.

> I'll try and re-create the problem and post the before
and after.
The answer is always in the code.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"SilverR252" <[email protected]> wrote in
message
news:eneb22$2cg$[email protected]..
>
quote:
You just haven't read the answers posted.
> Well, I spent over an hour googling variations of the
problems and found
> it
> referenced in only a couple of places. In neither post
was there an
> answer. You
> can see that
>
http://groups.google.com/group/macromedia.dreamweaver/browse_thread/thread/b35b5
>
0466da5ea05/8c5264cb11bf7d36?lnk=st&q=dreamweaver+extra+code&rnum=3#8c5264cb11bf
> 7d36 and
>
http://groups.google.com/group/macromedia.dreamweaver/browse_thread/thread/ae47c
>
5731780634d/012a96d2fb5c818f?lnk=st&q=dreamweaver+extra+code&rnum=8#012a96d2fb5c
> 818f although the latter refers to MX.
>
>
quote:
Show us your template page, please.
> As I said, I originally thought this was a problem only
on child pages of
> templates. However, it's happening in non-template
pages.
>
> I'll try and re-create the problem and post the before
and after.
>
> Thanks.
>

RMAN can't SET NEWNAME for datafiles added after Level 1

Version: 11.2.0.3
Platform : Solaris 10
I have the most recent Level 0 , Level 1 and post-L1 Archive logs of the source DB.
I am trying restore, recover in a different machine using plain RMAN (not RMAN DUPLICATE) into a new datafile location.
After the Level 1 backup was taken, 2 datafiles (namdata01.dbf, finaldata01.dbf) were added ( this got 'recorded' on the subsequent post-L1 archivelogs )
Before I ran restore and recover, I restored the latest control file from the most recent L1
RMAN> restore controlfile from '/u01/CATALOGTST/rmanBkpPieces/SNTCDEV_L1_0cnjqk54_1_1_20120829.rmbk' ;Understandably, this control file doesn't have info about the 2 datafiles added after L1 .Wish I could restore control file from archive log :)
So, I cataloged the archive logs as well using CATALOG command.
RMAN> catalog start with '/u01/CATALOGTST/rmanBkpPieces';
using target database control file instead of recovery catalog
searching for all files that match the pattern /u01/CATALOGTST/rmanBkpPieces
List of Files Unknown to the Database
=====================================
File Name: /u01/CATALOGTST/rmanBkpPieces/SNTCDEV_full_07njqj6j_1_1_20120828.rmbk
File Name: /u01/CATALOGTST/rmanBkpPieces/SNTCDEV_full_08njqj8u_1_1_20120828.rmbk
File Name: /u01/CATALOGTST/rmanBkpPieces/SNTCDEV_L1_0bnjqk3d_1_1_20120829.rmbk
File Name: /u01/CATALOGTST/rmanBkpPieces/SNTCDEV_L1_0cnjqk54_1_1_20120829.rmbk
File Name: /u01/CATALOGTST/rmanBkpPieces/arch_1_13_790513173.arc
File Name: /u01/CATALOGTST/rmanBkpPieces/arch_1_14_790513173.arc
File Name: /u01/CATALOGTST/rmanBkpPieces/arch_1_15_790513173.arc
File Name: /u01/CATALOGTST/rmanBkpPieces/06njqj6h_1_1
File Name: /u01/CATALOGTST/rmanBkpPieces/09njqj90_1_1
File Name: /u01/CATALOGTST/rmanBkpPieces/0anjqk3b_1_1
File Name: /u01/CATALOGTST/rmanBkpPieces/0dnjqk56_1_1
Do you really want to catalog the above files (enter YES or NO)? YES
cataloging files...
cataloging done
List of Cataloged Files
=======================
File Name: /u01/CATALOGTST/rmanBkpPieces/SNTCDEV_full_07njqj6j_1_1_20120828.rmbk
File Name: /u01/CATALOGTST/rmanBkpPieces/SNTCDEV_full_08njqj8u_1_1_20120828.rmbk
File Name: /u01/CATALOGTST/rmanBkpPieces/SNTCDEV_L1_0bnjqk3d_1_1_20120829.rmbk
File Name: /u01/CATALOGTST/rmanBkpPieces/SNTCDEV_L1_0cnjqk54_1_1_20120829.rmbk
File Name: /u01/CATALOGTST/rmanBkpPieces/arch_1_13_790513173.arc                         -------------------> arch logs that contain info on the new datafiles
File Name: /u01/CATALOGTST/rmanBkpPieces/arch_1_14_790513173.arc                         -------------------> arch logs that contain info on the new datafiles
File Name: /u01/CATALOGTST/rmanBkpPieces/arch_1_15_790513173.arc                          -------------------> arch logs that contain info on the new datafiles
File Name: /u01/CATALOGTST/rmanBkpPieces/06njqj6h_1_1
File Name: /u01/CATALOGTST/rmanBkpPieces/09njqj90_1_1
File Name: /u01/CATALOGTST/rmanBkpPieces/0anjqk3b_1_1
File Name: /u01/CATALOGTST/rmanBkpPieces/0dnjqk56_1_1
RMAN> EXITDuring Recovery , RMAN applied the archive logs and managed to create the datafiles successfully. But it can't restore the datafiles to the new location specified in the SET NEWNAME location. Luckily , I had created the original path and these 2 datafiles got restored there.
RMAN can't seem enforce SET NEWNAME for datafiles added after Level 1 backup despite cataloging.
Does SET NEWNAME .... thing work only for RESTORE ?
Log of restore and recover
$ cat restore-recover.txt
run
set newname for database to '/u01/app/CLONE1/oradata/sntcdev/%b' ;
set newname for tempfile '/u01/app/oradata/sntcdev/temp01.dbf' to '/u01/app/CLONE1/oradata/sntcdev/temp01.dbf' ;
restore database;
switch datafile all;
switch tempfile all;
recover database;
$
$ rman target / cmdfile=restore-recover.txt
Recovery Manager: Release 11.2.0.3.0 - Production on Sun Sep 16 21:27:49 2012
Copyright (c) 1982, 2011, Oracle and/or its affiliates. All rights reserved.
connected to target database: SNTCDEV (DBID=2498462290, not open)
RMAN> run
2> {
3> set newname for database to '/u01/app/CLONE1/oradata/sntcdev/%b' ;
4> set newname for tempfile '/u01/app/oradata/sntcdev/temp01.dbf' to '/u01/app/CLONE1/oradata/sntcdev/temp01.dbf' ;
5> restore database;
6> switch datafile all;
7> switch tempfile all;
8> recover database;
9> }
10>
11>
executing command: SET NEWNAME
executing command: SET NEWNAME
Starting restore at 16-SEP-12
using target database control file instead of recovery catalog
allocated channel: ORA_DISK_1
channel ORA_DISK_1: SID=18 device type=DISK
channel ORA_DISK_1: starting datafile backup set restore
channel ORA_DISK_1: specifying datafile(s) to restore from backup set
channel ORA_DISK_1: restoring datafile 00001 to /u01/app/CLONE1/oradata/sntcdev/system01.dbf
channel ORA_DISK_1: restoring datafile 00002 to /u01/app/CLONE1/oradata/sntcdev/sysaux01.dbf
channel ORA_DISK_1: restoring datafile 00003 to /u01/app/CLONE1/oradata/sntcdev/undotbs01.dbf
channel ORA_DISK_1: restoring datafile 00004 to /u01/app/CLONE1/oradata/sntcdev/users01.dbf
channel ORA_DISK_1: restoring datafile 00005 to /u01/app/CLONE1/oradata/sntcdev/example01.dbf
channel ORA_DISK_1: restoring datafile 00006 to /u01/app/CLONE1/oradata/sntcdev/cisdata01.dbf
channel ORA_DISK_1: reading from backup piece /u01/RMAN_bkp/BKP_sntcdev/SNTCDEV_full_07njqj6j_1_1_20120828.rmbk
channel ORA_DISK_1: errors found reading piece handle=/u01/RMAN_bkp/BKP_sntcdev/SNTCDEV_full_07njqj6j_1_1_20120828.rmbk
channel ORA_DISK_1: failover to piece handle=/u01/CATALOGTST/rmanBkpPieces/SNTCDEV_full_07njqj6j_1_1_20120828.rmbk tag=TAG20120828T234834
channel ORA_DISK_1: restored backup piece 1
channel ORA_DISK_1: restore complete, elapsed time: 00:01:35
Finished restore at 16-SEP-12
datafile 1 switched to datafile copy
input datafile copy RECID=8 STAMP=794179772 file name=/u01/app/CLONE1/oradata/sntcdev/system01.dbf
datafile 2 switched to datafile copy
input datafile copy RECID=9 STAMP=794179772 file name=/u01/app/CLONE1/oradata/sntcdev/sysaux01.dbf
datafile 3 switched to datafile copy
input datafile copy RECID=10 STAMP=794179772 file name=/u01/app/CLONE1/oradata/sntcdev/undotbs01.dbf
datafile 4 switched to datafile copy
input datafile copy RECID=11 STAMP=794179772 file name=/u01/app/CLONE1/oradata/sntcdev/users01.dbf
datafile 5 switched to datafile copy
input datafile copy RECID=12 STAMP=794179772 file name=/u01/app/CLONE1/oradata/sntcdev/example01.dbf
datafile 6 switched to datafile copy
input datafile copy RECID=13 STAMP=794179772 file name=/u01/app/CLONE1/oradata/sntcdev/cisdata01.dbf
renamed tempfile 1 to /u01/app/CLONE1/oradata/sntcdev/temp01.dbf in control file
Starting recover at 16-SEP-12
using channel ORA_DISK_1
channel ORA_DISK_1: starting incremental datafile backup set restore
channel ORA_DISK_1: specifying datafile(s) to restore from backup set
destination for restore of datafile 00001: /u01/app/CLONE1/oradata/sntcdev/system01.dbf
destination for restore of datafile 00002: /u01/app/CLONE1/oradata/sntcdev/sysaux01.dbf
destination for restore of datafile 00003: /u01/app/CLONE1/oradata/sntcdev/undotbs01.dbf
destination for restore of datafile 00004: /u01/app/CLONE1/oradata/sntcdev/users01.dbf
destination for restore of datafile 00005: /u01/app/CLONE1/oradata/sntcdev/example01.dbf
destination for restore of datafile 00006: /u01/app/CLONE1/oradata/sntcdev/cisdata01.dbf
channel ORA_DISK_1: reading from backup piece /u01/RMAN_bkp/BKP_sntcdev/SNTCDEV_L1_0bnjqk3d_1_1_20120829.rmbk
channel ORA_DISK_1: errors found reading piece handle=/u01/RMAN_bkp/BKP_sntcdev/SNTCDEV_L1_0bnjqk3d_1_1_20120829.rmbk
channel ORA_DISK_1: failover to piece handle=/u01/CATALOGTST/rmanBkpPieces/SNTCDEV_L1_0bnjqk3d_1_1_20120829.rmbk tag=TAG20120829T000356
channel ORA_DISK_1: restored backup piece 1
channel ORA_DISK_1: restore complete, elapsed time: 00:00:03
starting media recovery
archived log for thread 1 with sequence 13 is already on disk as file /u01/CATALOGTST/rmanBkpPieces/arch_1_13_790513173.arc
archived log for thread 1 with sequence 14 is already on disk as file /u01/CATALOGTST/rmanBkpPieces/arch_1_14_790513173.arc
archived log for thread 1 with sequence 15 is already on disk as file /u01/CATALOGTST/rmanBkpPieces/arch_1_15_790513173.arc
channel ORA_DISK_1: starting archived log restore to default destination
channel ORA_DISK_1: restoring archived log
archived log thread=1 sequence=12
channel ORA_DISK_1: reading from backup piece /u01/CATALOGTST/rmanBkpPieces/0dnjqk56_1_1
channel ORA_DISK_1: piece handle=/u01/CATALOGTST/rmanBkpPieces/0dnjqk56_1_1 tag=TAG20120829T000454
channel ORA_DISK_1: restored backup piece 1
channel ORA_DISK_1: restore complete, elapsed time: 00:00:01
archived log file name=/u01/archLogs/arch_1_12_790513173.arc thread=1 sequence=12
archived log file name=/u01/CATALOGTST/rmanBkpPieces/arch_1_13_790513173.arc thread=1 sequence=13
creating datafile file number=7 name=/u01/app/oradata/sntcdev/namdata01.dbf
archived log file name=/u01/CATALOGTST/rmanBkpPieces/arch_1_13_790513173.arc thread=1 sequence=13
archived log file name=/u01/CATALOGTST/rmanBkpPieces/arch_1_14_790513173.arc thread=1 sequence=14
archived log file name=/u01/CATALOGTST/rmanBkpPieces/arch_1_15_790513173.arc thread=1 sequence=15
creating datafile file number=8 name=/u01/app/oradata/sntcdev/finaldata01.dbf
archived log file name=/u01/CATALOGTST/rmanBkpPieces/arch_1_15_790513173.arc thread=1 sequence=15
unable to find archived log
archived log thread=1 sequence=16
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of recover command at 09/16/2012 21:29:51
RMAN-06054: media recovery requesting unknown archived log for thread 1 with sequence 16 and starting SCN of 1004015
Recovery Manager complete.
$
$
$ sqlplus / as sysdba
SQL*Plus: Release 11.2.0.3.0 Production on Sun Sep 16 21:30:04 2012
Copyright (c) 1982, 2011, Oracle. All rights reserved.
Connected to:
Oracle Database 11g Enterprise Edition Release 11.2.0.3.0 - 64bit Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options
SQL> select name from v$datafile;
NAME
/u01/app/CLONE1/oradata/sntcdev/system01.dbf
/u01/app/CLONE1/oradata/sntcdev/sysaux01.dbf
/u01/app/CLONE1/oradata/sntcdev/undotbs01.dbf
/u01/app/CLONE1/oradata/sntcdev/users01.dbf
/u01/app/CLONE1/oradata/sntcdev/example01.dbf
/u01/app/CLONE1/oradata/sntcdev/cisdata01.dbf
/u01/app/oradata/sntcdev/namdata01.dbf           ----------------------> restored to old location ignoring SET NEWNAME ....
/u01/app/oradata/sntcdev/finaldata01.dbf         ----------------------> restored to old location ignoring SET NEWNAME ....
8 rows selected.
SQL> exit
Disconnected from Oracle Database 11g Enterprise Edition Release 11.2.0.3.0 - 64bit Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options
$ cd /u01/app/oradata/sntcdev            # -----------------------------> the old location
$
$ ls -alrt
total 243924
drwxr-xr-x   3 oracle   oinstall     512 Aug 5 10:55 ..
drwxr-xr-x   2 oracle   oinstall     512 Sep 16 20:59 .
-rw-r-----   1 oracle   oinstall 104865792 Sep 16 21:29 namdata01.dbf
-rw-r-----   1 oracle   oinstall 19931136 Sep 16 21:29 finaldata01.dbf

RMAN> run
2> {
3> set newname for database to '/u01/app/CLONE1/oradata/sntcdev/%b' ;
4> set newname for tempfile '/u01/app/oradata/sntcdev/temp01.dbf' to '/u01/app/CLONE1/oradata/sntcdev/temp01.dbf' ;
5> restore database;
6> switch datafile all;
7> switch tempfile all;
8> recover database;
9> }RMAN executes the commands in the run block stepwise. In your case, starting from "set newname for database..." and lastly executing "recover database...".
Let me interpret it for you.
1. You restored the controlfile from the L1 backup which does not have any information about the 2 newly added datafiles. You cataloged the backuppieces and the archives to this controlfile, which means that the controlfile would now be aware that the required backups and archives are in this cataloged location.
2. You set newname for database to the desired location, thereby this command is executed restoring the database from the L0 and L1 backups. (These 2 backups do not have any information about the newly added datafiles and hence the 2 files would still not be restored).
3. You execute restore database which restores the files from L0 and L1 backup.
4. Switch datafile all, this renames all the files that were restored in the previous steps to the desired name/location that was mentioned in step 2.
5. Recover database: This is where the archivelogs come into picture. The data in the archives would be created & recovered. The newly added datafiles are now created & recovered but RMAN does not go back to STEP 2 and STEP 4 to re-execute the commands in STEP2 and STEP4 to restore it to the desired location (STEP 2) and Rename it (STEP 4). The files will have to renamed later by moving them manually to the location that you require.
So, RMAN does not execute the SET NEWNAME for datafiles which were added after the backup as the information about these files do not exist in the RMAN backuppieces.

Raw files open with a greenish tinge

I usually shoot raw + jpeg with my nikond200 and when i open raw files with acr they automatically take on a greenish tinge in comparison to their jpeg counterpart.
I would like them to open the same so i have a true image to start with and do my own adjustments.
I've played with white balance and still cant seem to get a match.
Is there a setting that can do this 'jpeg match' with every image i open or what should i do???

>Camera manufacturers, Canon and Nikon in particular, perform in-camera RAW to JPEG conversions designed to generate the over-saturated, over-contrasty and over-sharpened images that appeal to most amateurs.
>Their stand-alone RAW conversion software also performs the same conversion to your RAW images.
These statements are often made without any documentation. I have compared ACR's rendering of Color Checker images with that of Nikon Capture NX, using the same raw image for both conversions. The D200 was used for the capture. With ACR, I used the default settings and the default ACR calibration settings (i.e. no ACR calibration was performed). For Nikon Capture, I used normal contrast and saturation and the default tone curve. The Imatest results show that the ACR conversion is actually more saturated, with a mean chroma (saturation) of 113.7% as compared to 106% for Nikon Capture NX. For overall color accuracy, ACR is quite competitive, and is superior to Capture NX if one does an ACR calibration. For help in interpreting the Imatest results, readers are directed to the
Imatest web site.
Here is a composite of the two renderings, both in sRGB for web viewing:
And here are the Imatest plots:

Problems with DUPLICATE DATABASE when datafile was added after full backup

Hi,
I'm facing a problem when performing database duplication with the RMAN duplicate database command on a 10g database. If I preform the duplication from a full backup that is missing a datafile which was added to the database after the full backup, I get the following error message:
Starting restore at 10-10-2009 18:00:38
released channel: t1
released channel: t2
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of Duplicate Db command at 10/10/2009 18:00:39
RMAN-03015: error occurred in stored script Memory Script
RMAN-06026: some targets not found - aborting restore
RMAN-06100: no channel to restore a backup or copy of datafile 43The redo log which was CURRENTat the time of the datafile's 43 creation is also available in the backups. It seems like RMAN can't use the information from the archived redo logs to reconstruct the contents of datafile 43. I suppose that because the failure is reported already in the RESTORE and not in the RECOVER phase, so the archived redo logs aren't even accessed yet. I get the same message even if I make a separate backup of datafile 43 (so a backup that is not in the same backupset as the backup of all other datafiles).
From the script the duplicate command produces, I guess that RMAN reads the contents of the source database's controlfile and tries to get a backup which contains all the datafiles to restore them on the auxiliary database - if such a backup is not found, it fails.
Of course if I try to perform a restore/recover of the source database it works without problems:
RMAN> restore database;
Starting restore at 13.10.09
using target database control file instead of recovery catalog
allocated channel: ORA_DISK_1
channel ORA_DISK_1: sid=156 devtype=DISK
creating datafile fno=43 name=F:\ORA10\ORADATA\SOVDEV\SOMEDATAFILE01.DBF
channel ORA_DISK_1: starting datafile backupset restore
channel ORA_DISK_1: specifying datafile(s) to restore from backup set
restoring datafile 00001 to F:\ORA10\ORADATA\SOVDEV\SYSTEM01.DBF
.....The datafile 43 is recreated and then redo is applied over.
So, does anyone know if duplicate database can't use archived redo logs to recreate the contents of a datafile as a normal restore/recover does? If it's so, then it means it's necessary to perform a full database backup before every run of duplicate database if a datafile was added after such a backup.
Thanks in advance for any answers.
Regards,
Jure

Hi Jure,
I have hit exactly the same problem during duplication.
Because we backup the archive logs every 6 hours with rman I added an extra run block to this script.
run
backup incremental level 0
format 'bk_%d_%s_%p_%t'
filesperset 4
database not backed up;
(I also than hit a bug in the catalog which was solved by patching up the catalog dbs from 11.1.0.6 to 11.1.0.7.)
This will narrow down the datafile not being part of any rman backup to 6 hours while skipping datafiles for which a backup already exists.
Regards,
Tycho

Will data be updated in the infocube if char. are added after instalation

Will data be updated in the infocube if charecteristics are added after instalation? can any one help me.

Nag,
do you mean tat the IO is added to te cube after data has been loaded ? ( I am not sure if you can do this )
If it means customizing the delivered version of Business content , you will have to add te IO o the update rules as well , and add the same if required to the Transfer rules and data source to populate date.
BW is not that intelligent enough to realize what IOBJ you have added and how you want it filled without you specifying the same.
Arun
Assign points if helpful

Jaggy Text after render in FCP

OK So I bring in my nice text animation that I did in Motion 2 into FCP 5. I park on it and it looks nice and clean. Then after I render it in FCP it looks jaggy as if the field order is reversed. So I went back into motion and to render out a field render with the animation codec. Place in the time line. Nice and sharp. Then after the render it gets jaggy and nasty. What am I not doing? Both Motion and FCP projects and DV 720 x 480 both are lower field. Both the Motion project and the animation QT look fine at first then jaggy after render.

The Spencer article. Be sure to match your field order, use a lossless codec, etc.
Yet this doesn't always solve the problem.
The answer is probably because FCP is just plain buggy.
The work around? Just go into Motion and change your project resolution... to anything that doesn't match the same screen res. Dumb huh? Just double the res, or reduce it by ONE PIXEL -- both seem to make the text SHARP.
Good luck!
Now tell me why the Motion text pops all over horizontally in preview mode but not not after it's rendered... (bugs.)

Greenish tinge, added after render..

Similar Messages

Maybe you are looking for