Grey Screen in iPad Content Viewer when swipe through the last slides of the articles

Some of co-workers and clients reported and issue with the presentations and the viewer: some times grey screens appear when swiping in an presentation from article to article (reproducible only for the last slide of the article).
Pre-conditions:
1. Folio with several articles (3-4 is good).
2. Articles should have different number of slides.
Steps to reproduce:
1. Open folio on iPad and go to the last slide of each article.
2. Swipe from article to article (better from the first one article to the last one)..
Expected outcome:  Last slide of the next article is displayed.
Actual outcome: Grey screen is displayed instead of the last article. Some times it's needed to swipe fast to reproduce the issue. Or at least on the last slide you'll see grey screen instead of the content.
Content will be displayed if you scroll up the page. Seems that new (additional) page is added after the last slide of an article and disappeared after scrolling the page.
Notes: Reproducible with the latest version of adobe viewer (i'm using v31(3.4.3.0.96281). NOT reproducible in iPad Content Viewer with version 3.2.1.3.85505.
Maybe somebody knows the root cause of this issue and how to fix it?

I can confirm that I've seen this happen but beyond that, I can't help.

Similar Messages

  • Grey Screen in iPad Content Viewer

    A number of co-workers and clients have reported that when viewing a folio for the first time on a new device, a grey screen appears instead of the content. In general, the problem is fixed by closing the Conent Viewer in the app tray and restarting the app.
    I have only seen the issue once, but it has been reported to me a number of times and while it's no problem for my co-workers, we would prefer that when a client sees a draft of their folio for the first time, they are not fighitng with the software. As my sale person said, "we're losing the 'wow' factor.
    Any one else experiencing this issue or any expected fix?

    I get it with dual orientation folios in PDF format on iPad and iPhone. but
    maybe I experience a different bug ...
    (mobil gesendet)
    Am 24.05.2012 20:33 schrieb "Lukas Kawecki" <[email protected]>:
       Re: Grey Screen in iPad Content Viewer  created by Lukas Kawecki<http://forums.adobe.com/people/Lukas+Kawecki>in
    Digital Publishing Suite - View the full discussion<http://forums.adobe.com/message/4436705#4436705

  • Keeping the last slide on the screen when show is over

    I am hoping this is an easy solution. I am creating a slideshow which I am exporting to quicktime and what I am trying to do is keep the information from the last slide to stay on the screen without disappearing.
    Do anyone know how to do this?

    You can also set the poster image for the QT movie to be of the last slide so when the movie is not playing and not in pause it will default to the poster image. Set poster image for KN in QT inspector and for QT in QT Pro.
    If what Brief ly said is correct, no worries, if not set last slide to longest duration possible, duplicate the slide a few times and make a huge QT file of 30min of same image. Try using an efficient codec that realises the images isn't changing. No recommendations, you have to test for your particular image.

  • Setting the last slide to stay on screen

    Hello, I am making a slide show for work and am not able to find a way to keep the last slide in the iPhoto slideshow on screen at the conclusion of the show (want to stay in presentation mode instead of going to the editing screen).
    Thanks!

    Yes, I think so. 
    Set each slide's duration time manually to what you want in the Settings/This Slide pane:
    The last slide can be set to a maximum of 999 seconds.
    If you choose music it will continue to play, repeating if the track isn't longer than 999 seconds, until the 999 seconds run out.  For longer than 999 seconds duplicate the last slide, add it at the end and set it to 999 seconds also. 
    OT

  • Just updated DPS successfully but now my iPad Content Viewer isn't automatically updating.

    Hi Guys,
    just did the update successfully and evrything seeems to be working fine within InDesign.
    I have just added a new article to the folio I am working on but my iPad Content Viewer isn't checking for update automatically anymore, so I can view my new article.
    Any ideas why this happening?
    It was working yesterday when I was using it.
    Is there a way to force the ipad Content Viewer to check for updates?
    Please help asap, as I have a college deadline on Monday and need to check everything is working okay.
    Thanks.

    Hi Bob,
    I am new to DPS and this is my first time of creating folios, hence the deadline on Monday.
    Please ignore my second post, as I had forgot to sign in again after reinstalling on my iPad.
    Fingers crossed it does seem to be working again after the reinstall and I actually set all of the Version compatbilities to 24.
    I'll keep you posted if there are any more problems.
    Thank you for your reply.

  • How can I delete an unwanted folio from ipad content viewer?

    I have deleted the folio from the digital publishing suite, but that did not remove it from the ipad.
    There does not seem to be any option to delete it from the ipad content viewer as only "resume" and "view" are available as actionable options for this folio.
    Hope someone can help

    Thanks - I was hoping for something built in as the problem with this folio was that there were errors in the indesign software (had to uninstall and reinstall) and so the folio was not able to complete the download. So there was no option to "archive". I can imagine that a folio not being able to properly download would not be that unusual and having to uninstall and reinstall the content viewer is a nuisance!
    Of well, I will give it a try and cross my fingers that it does not keep hapenning!
    Thanks for your help - I will report back what happens

  • Is it possible that only people with buyed DPS are able to login to IPAD Content Viewer App?

    Is it possible that only people with buyed DPS are able to login to IPAD Content Viewer App?

    Log into digitalpublishing.acrobat.com with that ID and then try again.
    Bob
    grafikerorg.de <mailto:[email protected]>
    Tuesday, April 2, 2013 10:41 AM
    >
          Re: Is it possible that only people with buyed DPS are able to
          login to IPAD Content Viewer App?
    created by grafikerorg.de
    <http://forums.adobe.com/people/grafikerorg.de> in /Digital Publishing
    Suite/ - View the full discussion
    <http://forums.adobe.com/message/5199071#5199071

  • TS2570 I tried a safe reboot and my computer still shows a grey screen and the spinning gear when turned on. The last message on the reboot said "Launch_msg(): socket is not connected" have no idea what that means.

    I tried a safe reboot my computer had a grey screen and a spinning gear. Safe boot did not fix the problem.
    The last writing on the safe boot said " Launch_msg(): Socket is not connected.
    Tried re starting and same grey screen and spinning gear

    Can you boot to the Snow Leopard DVD?

  • I just get the new iPad air and when connecting it to my laptop, why the battery is not charging?

    just get the new iPad air and when connecting it to my laptop, why the battery is not charging?

    A lot of computers don't provide enough power to their USB ports to charge the iPad at a sufficient rate - it may still be charging slowly, and should be a bit quicker if the iPad's screen is off (if you leave it for a while and then disconnect it from your computer you may find that it's battery percentage has gone up). The wall charger is usually the most efficient way to charge the iPad.

  • How do I delete apps when I cannot get the red x, I cannot update the iPad because of lack of memory space. I heard it was a bug in the last version of the op.system, any ideas?

    I cannot update the iOS because of lack of memory (3.5 GB required). The apps cannot be deleted because I cannot get them red x in memory management or when they shake for reorganization. I heard this was a bug in the last update of the op. system. So what is the process?

    From where did you hear this..?
    Lockie555 wrote:
    I heard this was a bug in the last update of the op. system.
    DELETING APPS
    Touch the app and hold your finger down until all the apps start to jiggle. You will see a circled "x" in the upper left corner. Tap it to delete an app. When done press the Home button.
    You cannot delete any pre-installed iOS app.
    If there is No 'X' on any apps you have Downloaded... then check in Restrictions...
    Settings > General > Restrictions
    Understanding Restrictions  >  http://support.apple.com/kb/HT4213
    Lockie555 wrote:
    I cannot update the iOS because of lack of memory (3.5 GB required).
    Alterrnatively you can update using iTunes on the computer you usually sync with.
    See the Using iTunes Section Here...
    How to update your iPhone, iPad, or iPod touch
    NOTE:
    Make sure you have the Latest Version of iTunes (v11) Installed on your computer
    iTunes free download from www.itunes.com/download

  • Macbook pro camera produces a lot of green particles on my screen which are not visible when i take a picture or on the screen of a skype partner

    macbook pro camera produces a lot of green particles on my screen which are not visible when i take a picture or on the screen of a skype partner. Does anyone have a solution for this problem

    macbook pro camera produces a lot of green particles on my screen which are not visible when i take a picture or on the screen of a skype partner. Does anyone have a solution for this problem

  • After I reset the iPod I lost all of the iPod contents.  When I attempted to resynch I learned the iPod did not have enough space.  How can this be so when I have nothing on the iPod?

    Please help!.
    After I reset the iPod I lost all of the iPod contents.  When I attempted to resynch I learned the iPod did not have enough space.  How can this be so when I have nothing on the iPod?

    You will prbably had other sync setting than the default ones
    Check if the option "Only sync marked songs" is checked.

  • TS3243 My Desktop Mac won't startup, it turns on to the grey screen flashing question file. I have been able to startup from the snow leopard install cd but once I try to repair within DU the disk never appears in the side panel. The only thing there is "

    My Desktop Mac won't startup, it turns on to the grey screen flashing question file. I have been able to startup from the snow leopard install cd but once I try to repair within DU the disk never appears in the side panel. The only thing there is "Media"... What can I do? Help!

    If Disk Utility cannot see your drive it doesn't look good.
    You could try DiskWarrior. It is expensive but can often fix directory structures where DU cannot.
    Replacing the drive is also a strong likelihood. If you don't have a fairly recent backup, then it might be worth buying DiskWarrior
    additonal notes;
    Gray screen appears during startup

  • How to make  the last slide stay on the screen ?

    Hi,I need to make the last slide of my animation to remain on the screen when the animation ends and also when I export in a quick time movie .
    Does anyone can help me?

    A possible workaround would be to have something appear (like a shape) as a build outside the slide's viewing boundary (if you extend the size of the window, you'll see you have some workspace outside the slide) autmatically after the animation is finished, and set a delay time or build duration based on how long you need the slide to remain on the screen.  How this works will depend on your setup for quicktime export.

  • I have a keynote presentation that includes a significant amount of video.  When I edit the keynote slides (not the video slides) how can I save the changes without re-saving the videos (because that takes a VERY long time)?

    I have a keynote presentation that includes a significant amount of video.  When I edit the keynote slides (not the video slides) how can I save the changes without re-saving the videos (because that takes a VERY long time)?  I edit the presentation depending on the audience to which I am presenting.

    If you add a new  slide with just a text box (therefore a very small amount of data),  to an existing presentation then save,  Keynote will only save the new content to the file,  it wont save  pre-existing content as its already included in the file.
    The time  taken to "save" will be very much shorter than a "save as" when all of the existing content is saved again.

Maybe you are looking for

  • Cannot upgrade to iWork 9.0.3 running os 10.6.8

    Greetings all, I cannot get iWork '09 to upgrade using Software Update. I am running 10.6.8. iWorks is installed in /Applications/iWork '09. I have changed neither the name or location of the initial install. My specific problem is that pages will no

  • No of days left

    Dear Folks, Here my requirement is I need to create exception base on the following conditons on date fields. if (current date-statistical date) field is >180 then generate Exception. For above I have created a Formual between two date functions for

  • (Mavericks) iTunes keeps crashing on sync "This iPhone is already syncing apps with "%1$S"

    I updated my MacBook Air to Mavericks yesterday.  When attempting to sync my iPad2 and iPhone4 this morning, iTunes keeps crashing on me. There seems to be some issues with what it thinks my computer name or my Apple ID is.  It keeps referring to the

  • Problem when opening "Mail"

    Dear members of the Apple Community, After transferring my files and my profile on my new Macbook pro, I keep encountering a problem when opening "Mail". Each time I try, the app asks me to choose a mail account to add, but I already added the ones I

  • My iPod Touch, 64gb, not jailbroken, is stuck on the loading white circle page and cannot sync?

    It is stuck on the page when it just turns on. My mom was recording a video and it just startyed to say rebuilding library( it does once a day). It shut itself off with 3/4 battery. And if I press the Home and Sleep/power buttons simoultaneously, wil