Grey Yoga 2 Pro out of stock

Hi,
I was looking to order the grey yoga 2 (4500u) but was told by lenovo sales they were waiting to sell the other colours first (orange!) any idea when it will be put back in stock?
Hopefully they realise orange was a terrible idea in the first place!
Tony

they've added another 30 of the orange ones

Similar Messages

How fast do "old" MacBook Pros go out of stock?

How fast do MacBooks and MacBook Pros go out of stock in stores after the latest update announcements each year?
If the rumors that Apple will discontinue installing internal optical drives in their MacBook Pros, then I would want to buy the "older" model before it goes out of stock because I use the opticle drives A LOT for burning and reading physical media, and also like to have hard copy backups of expensive software so that it won't disppear like it would if the hard drive on a backup disk failed.
I think it would be unlikely they would completly discontinue including optical drives, but very plausible that they could discontinue including them in the 13-inch models of the MacBook Pro to save battery life. However, I don't want to have to pay an extra $500-$700 just to get the 15-inch model either.

Always buy the latest model when upgrading. Just get an external DVD drive.
17" 2.2GHz i7 Quad-Core MacBook Pro  8G RAM  750G HD + OCZ Vertex 3 SSD Boot HD 
Got problems with your Apple iDevice-like iPhone, iPad or iPod touch? Try Troubleshooting 101

Yoga Pro 3 - Wifi dropped connections; refuses to reconnect

First day of owning my Yoga Pro 3. Has anyone experienced intermittent wifi failures?
I've had trouble on both access points that I have at home. One is an older 802.11b router (set to channel 1), and other a D-Link815 dual-band bgn router (with the 2.4Ghz radio set to channel 11).
I've experienced problems using both routers on either channel and when using the 5Ghz spectrum as well.
Connectivity with either access point lasts from 5 mins to 30+ mins (in limited time I had available to use it so far).
Far more frustrating is that when dropped, the YP3 refuses to reconnect. Manually selecting the access point in the network connections charm and clicking "Connect" results in failed attempts at connecting and system will refuse to connect to any Access Point for a random amount of time. At one point I had attempted to reconnect about 20+ times before it did reconnect.
Obviously, tried rebooting without any change in behavior.
I uninstalled the Broadcom wireless driver (the system the auto-installed a Microsoft driver which, from the version number, appeared to be an older version of the same Broadcom driver as they used a very similar numbering scheme and were very close). No change. I reverted that change.
Are there known issues with these wifi cards/drivers accessing open wifi connections? I live in the middle of no-where, so have had no compelling reason to secure the access points.
What else should I try?
Thanks

My WiFi connects fine @ 2.4 GHz only Access Point (netgear wnr2000 v2) 4 rooms away (~ 35 feet and my Linksys router is on the same room as me so I get 866.5 Mbps all the time), giving me fluctuating connection speed from 243 to 300 Mbps. I generally don't use the 2.4 GHz band but I occasionally try it to check for stability. It's working fine but there's too much 2.4 GHz clients in our area so I use 5 GHz for Netflix, Hulu steaming where low latency stability is needed.
Definitely try reseating the antenna so you can rule that out. If you still can't connect @ 2.4 GHz, try other 2.4 Ghz access points or it's just that you get a defectve Broadcom 4352 card or it might be even Windows 8.1 drivers itself.
Lenovo Y470: i7-2670QM | 8 GB DDR3 1333 MHz RAM | Nvidia GeForce GT 550M | 500 GB 7200 RPM Seagate HDD | ASUS PCE-AC56 802.11ac Network Adapter | Windows 7 Professional 64-bit

Yoga Pro 2 - Display not recognized in windows (Driver or Hardware issue?)

Out of warranty by a month!
Yoga Pro 2 - 256gb, installed new wireless card a month ago. Windows 8.1
The touchscreen still works while the screen is black.
System restarted after sleep mode I think.
The Lenovo logo is displayed, seems to load windows, but when windows loads (I don't see it load so this is an assumption) the screen blanks and the black light is on.
I can connect an external monintor which will connect after a return from sleep mode(odd). Which then turns the backlight off.
When on the external monitor the internal display is not even recognized by windows.
When I boot in safe mode, the internal screen works fine with of course limited capability.
I have reloaded display drivers from the support site.
Right now my internal monitor is not recognized by windows and is dark, and I can use an external monitor.
Anyone have any clues as to what my be going on? Hardware, driver etc???
What information can I provide?
Solved!
Go to Solution.

This is a pretty weird issue with conflicting observations.
1) Screen works in Safe Mode but not in regular boot. (So, not hardware issue)
2) Display works on external monitor in regular mode. (So, not drivers issue)
Did you install the wireless card yourself? Did you unplug the display cable while installing the card?
Could you re-open and check that all connections are good?
Is the Wi-Fi card working well?
I would also recommend a complete reset of the laptop to eliminate the possibility that this is a corrupt driver. You can use the NOVO button to reset your laptop. Make sure to make a backup on external drive for your personal files.
Current System - Lenovo Y510P, GT755M SLI, 8GB RAM, 1TB HDD + 24GB SSD
When your plans fail, your Real Story begins!!

I want to print grey type on black cover stock.

I want to print grey type on black cover stock. I'd like the type to be the equivalent of a 20% grey in PhotoShop. I'm told setting the black (K) to 20% won't work. How then do I get my grey?

You have to be careful with drying times to avoid offset at the press.
And you also have to be mindful of reversing out type on a dark background.
It would look better if they used 50% Cyan and 100% Black - or 50% magenta would give a warmer hue to the black.
But that would make it easier to print the 20% gray into the white areas that remain.
And because it's going to knockout you have to be mindful of not using small type, thin fonts, or serifs as they could potentially fill in.
It's also wise to add a bit of extra tracking to the letters to separate them a bit more so that it doesn't break away on the plate.
For digital reproduction you don't need to worry about most of those - but if it's a large print run then printing digital is going to be very expensive. For short print runs it may not be.
But for digital large areas of ink coverage are prone to streaking and you may not get the desired effect.
In short
If it's a large print run talk to your printers about the best practice for setting up your Rich Black and caveats that interfer with your legibility of the text on the front cover.
It's a short print run consider having the cover screen printed rather than digitally printed.

My wireless card disappeared in my yoga pro 2

Hello,
my wireless intel 7260 card disappeared in my yoga pro 2 windows 8.1 device manager, my wireless card is burnt out ?
thanks for your help

Welcome to the wireless-less world of Lenovo...
https://forums.lenovo.com/t5/Idea-Windows-based-Tablets-and/Yoga-Pro-Intel-Wireless-N-7260-Adapter-E...
https://forums.lenovo.com/t5/Idea-Windows-based-Tablets-and/Re-Yoga-2-Pro-Wifi-Problems/td-p/1452437
https://forums.lenovo.com/t5/Idea-Windows-based-Tablets-and/Yoga-2-13-Wireless-Card-Unauthorized-Mes...

Just need a lousy screw for a yoga pro!

One of the screws fell out of the back of my yoga pro and lenovo's absolutely WORTHLESS website is of absolutely NO VALUE in assisting! The "support center" poput won't connect. The "find service provider" popup won't connect. Would it really be all that difficult to simply list the providers by state on a SIMPLE webpage somewhere? I also need whatever weird screwdriver is required -- is there something wrong with a phillips head screw? Does Lenovo enjoy making more complicated than it already is?

That's really sad.
Use some liquid Lock-tite.
Works great.

Yoga Pro 3 Touch Pad Not Working With Win10

This has been hinted around in several other YOGA Pro 3 WIN 10 upgrades but we probably need to start splitting out each particular issue. My upgraded to Win10 with no issues on the upgrade itself. I performed the upgrade with a mouse attached and now I no longer an switch back to using the touch pad. Another way to say it is that my Fn + Delete button no longer works. I checked Synaptics for a driver but they don't list one for Win10. Any one know a work around to get the touch pad working again or a suggestion to fix? Thanks

I'm in the same boat - no touchpad after upgrade. I am sure we are the first of thousands to experience this issue.

Thinkpad yoga pro 15 w/3D sense

In case someone was curious as how the Windows 10 upgrade went on a Yoga Pro 15 w/ 3DSense.
Windows 10 installed the latest graphics card drivers for Win10 but installed a slightly older version Intel driver 10.18.14.4049 instead of 10.18.15.4248 for the 5500. I have no issues with the Intel driver so I'm keeping it this way for now since it's running fine. Probably install soon.
Upgrade was pretty smooth. Only Driver hitches that I had to download after install were the 3D Sense camera driver (Camera was inoperable at first start of Win10 but no issues after installing Lenovo's Intel Win10 3D drivers) and lenovo Power Management Driver.
All in all it was pretty trouble free from what I can tell so far!
I first made sure to update as many drivers as I could from Lenovo site before the upgrade. I did have to force start the update in windows as it kept failing on it's own everyday like others have experienced.

I did not update drivers that were solely for Windows 10. I did update all other drivers listed for Win10 and Win8 you know the same driver works for both. I made sure that all drivers for Win8 were updated and no I did not uninstall any software. I did turn off my antivirus but in hinesight I would recommend uninstalling your antivirus before upgrade and download the newest version for Win10. I ended up uninstalling mine after the upgrade to install the latest verion Kaspersky. Doh! Actually should have known better. It didn't screw with the install but Win10 right away said, this Kaspersky has limited use. The one thing that freaked me out when I upgraded was the 3D camera was inoperable but I downlaod the driver firmware for windows 10 it's backup and working. So far everythings running smooth still playing around with stuff when I have the time to see if there is any glitches but so far looks good. Edit: I did update the Bios to the newest version before upgrade and that actually stabilized some issues I had with my yoga before the upgrade, lol.

Yoga Pro 2 Fan noise tweak fix?

Anyone we can tweak the EC for yoga pro 2 like was done for the yoga 13
http://forums.lenovo.com/t5/Idea-Windows-based-Tablets-and/Yoga-13-Fan-Noise/td-p/902693/page/84

The MBA (at least my old 2010 model (which was a total lemon)) definitely has a substantial fan which kicks in under load (gaming etc.). You don't see vents because they just use the crack along the hinge line to get the air in and out. Yes, this means there's less exposed vent area but you still have to worry about blocking it say you were using it on top of a blanket or something.
Also if your MBA ingests, say, enough cat hair to block the fan intake, then good luck getting at it to clean it out. I had an old Dell gaming laptop that became unusable until I opened it up and pulled the 1/8" mat of cat fur off the face of the heat sinks.
Over time the inside of your laptop can start to look like that furnace filter you haven't goten around to changing in a year or two, depending on how the airflow goes. Usually the air gets pulled through a heat sink and the outer face of the fins can collect stuff.
Someday the power dissipation may be such that we can have completely sealed dust-proof machines, but until then environmental concerns over time are still a big pain.
Z.

Trouble with Adobe Reader Touch on Lenovo Yoga Pro 2 in tablet mode. Pdf shows up as blank pages.

I have a Lenovo Yoga Pro 2 and when I change it to tablet mode and use the Adobe Reader Touch app, my pdf shows up as a blank page. I have installed other pdfs in the past and those show up fine. However, as of three days ago, whatever pdf I install shows up as blank on my screen. Is there a solution to fix this?

Could you please share your test file?
You can send the file at [email protected]

Unable to clear out the stock in SAP

Hi Expert!
Need your help. I have an issue, my user wants to clear out the stock in SAP because they are the old stock and there's no stock in actual warehouse for those materials actually. it is just in the system taht showing those materials have stock in warehouse. but however, she's unable to clear out the stock. So when i check in the system, the materials are batch managed and still have open POs dated on 2003 which has already old. Is it the reason why she can't clear the stock? Do i need to ask her to off the batch management for those materials,then delete the POs and then only she able to clear the stock? Please advise on the solution..
Thanks.

hi
do the physical inventory and adhust stock
1) Create physical inventory doc using MI01
2) Post the Physical Inventory stock Using MI04 ( Mark Tick if the stock is Zero)
3) Post the doc in Using MI07
Note : Give the batch no if the material is activated the batch

What type of ssd does yoga pro 3 have?

Is it MLC or TLC? I heard people say yoga pro 3 uses sumsung SSD, and sumsung like using TLC which i dont prefer.

Samsung or LITE-ON, per the Hardware Maintenance Manual:
http://download.lenovo.com/consumer/mobiles_pub/lenovo_yoga_3_pro_1370_hmm.pdf
I don't work for Lenovo. I'm a crazy volunteer!

Out of stock material report based on sales orders

Hi,
I have a requirement to create a report where I need to show the unfulfilled sales orders due to materials were out of stock for those sales orders.
e.g. there were 3 orders placed yesterday. we partialy delivered order - 1 as one of the material was available but second material was out of stock and order - 2 was not delivered at all due to out of stock materail and order - 3 was delivered completely
Header 1
Header 2
Header 3
sales order
material
quantity
order - 1
mat -1
0
mat - 2
2
order - 2
mat-3
0
order - 3
mat - 4
2
required out put it to show only those sales orders which has 0 quantity materials.
Header 1
Header 2
Header 3
sales order
material
quantity
order - 1
mat -1
0
order - 2
mat-3
0
any advice on data modeling as to how do i achieve this?
Which dataosurces shall i use?
regards,
Biapp

Hi Gajesh,
I have looked in to the material availability date and it gives me the required result about 80%.
only problem is e.g.
if the customer placed order for a material for 10qty and if we had 5 in stock same day and the rest of the 5 qty is available after the month but material availability picks up that 5 qty and it does not show that we were not able to fullfill the order 100%. material availability date does not pick up the second date.
how do i overcome this issue? do you have any idea?
regards,
BIapp

How to get out of stock material in report

Hi,
I have a requirement where we need to find out which customers orders were not fulfilled due to stock availability. or how do I get which materials were out of stock yesterday.
thank you for your input in advance.
biapprentice

Stock is the most difficult information to manage in Business Warehouse, since it is fast changing and time depended data.
If I were you I will built my solution based on DSO and then infocubes. For example, you will store day + SKU + stock quantity in one DSO and you may create an other DSO you may store the daily order requirement. After this stage you can load calculated data in a infocube and report by using simple queries.
Hope I can open a gate.
Cheers,
Sarhan.

Grey Yoga 2 Pro out of stock

Similar Messages

Maybe you are looking for