Grid Layout - Getting two or more fields to display on the same line/row.

I am using version 4.2.
I have a form with a number of items.
I wish to control the display of the items so that some fields are beside each other (on the same line or row).
I have set the grid layout as follows:
:PX_ITEM1
Start New Row: Yes     
Column: Automatic               
Column Span: Automatic     
:PX_ITEM2
Start New Row: No     
Column: Automatic     
New Column: Yes          
Column Span: Automatic     
When I do this the items are not displayed on the same row.
I can see when you change the "Start New Row" from No to Yes, the item fields ARE moved into the same <Div> that controls the row, but they just aren't displaying how I would like them.
Has anyone got this working?
Amanda.

Hi Amanda,
I believe I have discovered the cause of the issue you are facing.
The problem is with the "Alert Region" region template and that it does not have any display points specified so indicate the number of grids that can fit in its region body. Without having any display points, the grid layout system attempts to use all columns available to its container. However, because the Alert Region has additional padding within, the columns will not fit and wrap to the next line.
To fix this issue, you will have to modify the "Alert Region" region template, go to "Display Points" and click Add Row. You will need to enter the following fields:
Name: Region Body
Template Substitution: BODY
Grid Support: Checked
Maximum Fixed Grid Columns: -1
This will fix the issue for you. I've logged a bug within our bug system to track this so we can fix it in a future release of APEX.
Best,
Shakeeb

Similar Messages

  • 2 fields with text on the same line

    Hi everyone,
    Could anyone let me know how I can get 2 fields with their text values in the same line. For eg:
    weight ______         unit of weight _____
    i need both of the fields and text to be visible.
    Thanks/
    Message was edited by:
            Raj Kali

    Hi,
    You can use SELECTION-SCREEN BEGIN OF LINE and SELECTION-SCREEN END OF LINE.
    SELECTION-SCREEN BEGIN OF LINE.
    SELECTION-SCREEN COMMENT 1(10) INPUT1.
    PARAMETERS P1 TYPE I.
    SELECTION-SCREEN COMMENT 40(10) INPUT2.
    PARAMETERS P2 TYPE I.
    SELECTION-SCREEN END OF LINE.
    INITIALIZATION.
    INPUT1 = 'FIELD1'.
    INPUT2 = 'FIELD2'.
    Regards,
    Ferry Lianto

  • Getting two midi threads to start at exactly the same time

    Hello, is it possible to get two threads to start at exactly the same time because when I start two threads or more at the same time that playback midi using a synthesizer, they never start at exactly the same time.
    Any help would be appreciated.

    Use the Behavior framework for making changes in the scene. This uses an internal j3d thread which is in sync with the rendering thread.
    See chapter 4 (Interaction) and 5 (Animation) in the 2nd module of the j3d tutorial (this may not be the correct chapters, since i have a rather old version of the tutorial)

  • UTF8 - Configuring two or more double-byte languages in the Same DB

    I would like to ask.
    a) Can the same DB configured to support more than one double-byte language, at the same time ? For example, I want the same set of tables to accept Simplified Chinese, Traditional Chinese, Korean and Japanese.
    b) If yes, then how are the code-bases of the WINNT would look like. I find that, changing the windows registry entry for various codebases, allows us to choose the latest entry only. Will the OS allow more than just one codebase to co-exisit. I dont know, if My question is correct or not. Pardon.
    Please help me in getting answers to these questions.
    Regards,
    Suganyaa

    Hi,
    Thanks for the reply. I just wanted to confirm the details. And, the answer to the second question...as far as I have gathered is ...
    " OS can support only one of the codebase. Not all at the same time. When I modify the codebase in the windows registry to support simplified chinese, i cannot use korean langpack. And, so on. But, I think this should not be a problem in developing the application. As, the multi-lingual users, will all have their OS codebases, in accordance to their language. The application , ( in java ) should be able to accept the double bytes and then store it in Oracle 8i. And, that is also not a problem.
    I am a new learner...sorry if I confused you.
    Regards,
    Suganyaa

  • How to check if two or more controls/i​ndicators have the same name/label in LabView?

    LabView does not show any rror if I name two controls with exactly the same name. It can be confusing. I am using LabView 6.1.

    Some people like the fact that you can name things the same. Some even want to be able to have two VIs with the same name in memory at the same time. (Scoping rules to follow in future LabVIEWs.) You can write a small program that lists out the names of all the controls and indicators in a VI using the VI server property nodes. Oh, OK I'll give you an example. (See attached)
    Daniel L. Press
    PrimeTest Corp.
    www.primetest.com
    Attachments:
    PT_List_Control_Names_and_Detect_Match.vi ‏50 KB

  • How can I separate playlists from different libraries when two or more users do login in the same computer?

    We've got two computers. I access my iTunes on both of them. I've got an iPod nano. But another user access his own iTunes account in one of these computers. He's got an iPhone. When I login in this one, I share all my playlists with him, and vice-versa. How do I do to separate these libraries without deleting one of them?

    check out method one in this support article: How to use multiple iPods, iPads, or iPhones with one computer

  • How do I get two independent data sources to graph on the same chart?

    I have one graph of streaming voltage and another graph of a simple boolean function which jumps from zero to one when a button is pushed. I'd like to have both lines of data display on one graph. The goal is to have an even marker for the voltage graph - pressing the boolean button would "mark" important data points during acquisition. How do I combine the two? (I tried putting both into an array and graphing that, but it seems to just average the two instead of plotting them separately.) Thanks.

    And yet another way...
    If you present an array of waveform data-types you can sidestep this issues of disimilar sample rates.
    Ben
    Ben Rayner
    I am currently active on.. MainStream Preppers
    Rayner's Ridge is under construction
    Attachments:
    Wform_chart.vi ‏40 KB

  • ALV report -  fields do not print on same line

    I am working on an ALV report now. And I was trying to download the report using the buttons.
    When I download the file (Local File Button)  and then try to view it, all the fields are not on the same line.
    Say for example, if i have 75 fields, half appear on the first line and the other half appear on the second line.
    But when I try to view the file in excel format using ctrlshiftF7, it looks perfectly fine (All the 75 fields lie on the same line).
    And also when I right click on the report and save as .mhtml, it looks good (All the 75 fields lie on the same line).
    How can this issue be fixed? Is it something to do with the code?
    Please let me know, if anybody else had a similar issue and as to how it was resolved.
    I would greatly appreciate your help. Thank You.

    I am not very clear about your problem.
    What i understood is that you are downloading the file (I beleive as unconverted) and than opening it in NOTEPAD and you are getting one record in 2 lines. If yes than try to uncheck the Format-> word wrap in the menu in Notepad.

  • Date Picker display problems on same line with no new field

    With version 3.1.1 the attempted display of two date fields side by side appear stacked in the same column with the labels in between instead of side by side. This works fine with version 1.6.
    Create a page with 2 Date Picker items. Call the first one P1_DATE_FROM and the second one P1_DATE_TO. For P1_DATE_TO set the "Begin on new line" attribute to NO and the "Field" attribute to NO then display the page.
    The resulting display will be shown as:
    Line 1: Box for Date From value with date picker icon
    Line 2: Labels for both Date From and Date To with only a single space between
    Line 3: Box for Date To value with date picker icon
    The resulting display should be:
    Line 1: Label for Date From, Box for Date From with date picker icon, Label for Date To, Box for Date To with date picker icon.
    If you set the "Field" attribute to YES then the fields will appear on the same line in separate columns. I am trying to leave the second column available for and additional column of items in order to reduce the vertical scrolling on the page.
    If you repeat the above example with Text fields instead of Date Picker fields the desired result is achieved.

    You are correct that saying "Yes" to the field attribute will allow the items to format properly however this will push the second field into the second column on the page. I am purposely trying to keep these 2 items in the first column so that I can place a third item in the second column.
    I have tried using the "Start and Stop HTML table" feature to work around this but I can't control the alignment of the margins for the items above and below the start and stop item which make the display of the region even worse.
    Any other ideas or suggestions for work arounds would be appreciated.

  • Formula in Fields and search two or more fields

    Hi, is it possible to extract two or more fields to a UDF and add some text in it?
    For example, in UDF field A in AR invoice, we extract field B and field C and field D together and add
    If I want to add formula in field, what operators should I use such as +-*/?
    For example, fieldA in row of AR invoice plus fieldB in row of AR invoice mulitply by 20%.
    Thanks.
    Raymond.

    Raymond,
    You cannot use T0.xyz, .. as you are not referencing any table.
    If you want the values on the screen for 2 different columns then you need to use their column references.
    Example:  For getting the Price from Invoice rows you would use
    SELECT $\[INV1.Price]
    To avoid getting the currency symbol you could use SELECT $\[INV1.Price.Number]
    The usage of .Number extracts only the number part of the column.
    Please specify the document and the fields names and what you want to do and I will help you from there
    Suda

  • Two fields on the same line in sreen programming

    Hi All,
    I need to create a selection screen which would have two fields (their texts and their irespective input fields) in the same line, on the screen.
    I was able to achieve this by using code--
    SELECTION-SCREEN BEGIN OF LINE.
    SELECTION-SCREEN COMMENT 1(31) text-a04.
    PARAMETERS: sch_begd LIKE qppnp-begda.
    SELECTION-SCREEN COMMENT 52(22) text-a05.
    PARAMETERS: sch_endd LIKE qppnp-endda.
    SELECTION-SCREEN END OF LINE.
    This could allign the fields - start date (text-a04) and end date (text-a05) in the same line along with their input fields.
    But I am facing two issues with this code-
    1. I am not able to get the underline same as we get when we create selection screen using 'select-options' and 'parameters'.
    2. This is causing accessibility issues, as the field text and the input field are no more linked (since I am using text element to display the field text, like for start date), it cannot find the text to be read for the input field and hence the checkman errors.
    Please suggest how to achieve the same.
    Thanks and Regards,
    Arpita.

    Hi Arpita,
    Are you trying to have select-option field in your screen in dialog programming?
    If yes than you can use the following approach else ignore this.
    Create one screen (100) and create subscreen area on this screen and call this subscreen in PAI and PBO of screen
    Using call subscreen check F1 help for calling subscreen in PAI and PBO.
    Now you should create your selection screen on the subscreen use selection screen begin of screen (100) option of defining
    selection screen and then add your selection options here.
    Regards,
    Pawan

  • How to place two text fields on the same line in adobe

    I am trying to create a form on adobe and I would like to have two unique text fields on the same line. Is this posible? 

    If you are using FormsCentral it is, the fields can be placed "side by side" in a row.  There is a "+" sign on the right side of the field that brings up a toolbar to add a field adjacent.  You can also right click on a field and select "Insert beside", or you can "drag and drop" fields next to one another or to a new row.
    Thanks,
    Josh
    PS - One note, if you are using the "desktop" application of FormsCentral that comes with Acroat Pro XI make sure the application is up to date by either using the "Help" - "Check for updates" menu item or by signing into the application so that you have the latest features including the side by side layout.

  • How to get two parameters in the same line of selection screen?

    hello
    i need to get my selection csreen like bellow.
    r1 radiobuttion  -some space --p1 parameter
    i should not get the parameter in the next line of  radiobuttion.
    how to get two parameters in the same line of selection screen?

    hi....
    modify the following code
    it will work
    SELECTION-SCREEN BEGIN OF BLOCK SL1 WITH FRAME TITLE TEXT-003.
    SELECTION-SCREEN BEGIN OF LINE.
    SELECTION-SCREEN COMMENT 10(15) TEXT-001
                     FOR FIELD P1.
    SELECTION-SCREEN POSITION POS_LOW.
    PARAMETERS : P1 TYPE   C USER-COMMAND R2 RADIOBUTTON GROUP R2 DEFAULT 'X',
      P2 TYPE SCARR-CARRNAME,
      P3 TYPE CHAR1 RADIOBUTTON GROUP R2.
    SELECTION-SCREEN END OF LINE.
    SELECTION-SCREEN END OF BLOCK SL1.

  • I am running Windows7 on my PVC. When I log in I'm getting two Apple error messages. One says, " The procedure entry point sqlite3_wal_checkpoint could not be located in the dynamic link library SQLite3.dll." The second says, "Apple Photostreams stop

    I am running Windows7 on my PVC. When I log in I'm getting two Apple error messages. One says, " The procedure entry point sqlite3_wal_checkpoint could not be located in the dynamic link library SQLite3.dll." The second says, "Apple Photostreams Uploader has stopped working".  Help!

    Entry point errors can often be fixed by deleting the offending dll, then repairing the component it is part of. If that doesn't help read on...
    For general advice see Troubleshooting issues with iTunes for Windows updates.
    The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
    Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
    If the advice above doesn't resolve things you could try this alternate version:
    iTunes 12.1.0.71 for Windows (64-bit - for older video cards) - itunes64setup.exe (2015-01-28)
    which is a 64-bit installer for the 32-bit version of the core application, similar to previous 64-bit releases.
    Or roll back to the previous build:
    iTunes 12.0.1.26 for Windows (32-bit) - iTunesSetup.exe (2014-10-16)
    iTunes 12.0.1.26 for Windows (64-bit) - iTunes64Setup.exe (2014-10-16)
    tt2

  • The bookmarks toolbar is there but has no item buttons on it. How do I get the items back for this toolbar? Also would like to know if the toolbars can be put on the same line to make more room on the page (drag & drop) ??

    The bookmarks toolbar is there but has no item buttons on it. How do I get the items back for this toolbar?
    Also would like to know if the toolbar can be put on the same line to make more room on the page (drag & drop) ?? Like the menu & bookmarks toolbar could/should fit on same line. This would add more page view...
    Floyd Perry
    Thanks

    Check that you still have the "Bookmarks Toolbar items" placed on the Bookmarks Toolbar
    * Make sure that you have the "Bookmarks Toolbar" visible: "View > Toolbars"
    * Check in "View > Toolbars > Customize" that the "Bookmarks Toolbar items" is on the Bookmarks Toolbar
    * If the "Bookmarks Toolbar items" is not on the Bookmarks Toolbar then drag it back from the Customize window onto the Bookmarks Toolbar
    * If you do not see the "Bookmarks Toolbar items" then click the "Restore Default Set" button
    You can only move the content from a toolbar onto other toolbars if all toolbars support that feature. You need to check that in the options of each toolbar.

Maybe you are looking for

  • How to align DTN navigation Entries

    Hi All I am using our custom generated Theme in portal. I changed the Image Expand and collapse icon in theme level. but now the image for expand or collapse(arrow image) appears at the edge of the screen. i want to move it some 10 px to right. i tri

  • How to sincronize with itunes an 3G iphone that has the same name as the new 4S

    I've just boght a new 4s iphone to substitute my old 3G so when asked by itunes I didn't change the name of the new iphone. Now I have two I phones with the same name and the old one is not able to sinchronize with I tunes any more. It's not even abl

  • Block stock return to vendor.

    Sir i wish to return material back to vendor from block stock .How to do this.I know that by movement type 122 we can return material back to vendore from unrestected stock. I am online.......

  • Copy paste into dock

    If someone could please help Firstly im a complete novice I have had my mac for just over a year and great with no problems until now when i copy text from a webpage and drop it onto the safari icon in the dock it no longer works very frustrated and

  • Workgroup Bridge

    I'm getting an the following error on my workgroup bridge. And I'm not able to pass traffic across it. *Mar 1 00:03:29.665: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio 0, changed state to up *Mar 1 00:05:48.860: %DOT11-4-UPLINK_DOWN: I