Grid lines after text box removed
I put a text box in a Numbers spreadsheet. The text box covers an unused part of the grid. Later I delete the text box, don't want it after all. The grid lines underneath where it was are gone. How do I get them back? This is not just on my display. The spreadsheet prints out with that section of grid lines missing too.
I am not talking about cell borders that may be added, just the underlying grid lines on the spreadsheet.
Spring 2014 iMac, Mavericks, new Numbers. (But Numbers 2009 used to do the same thing.)
Hi Lithodendron,
Thanks for your reply and the gold star.
lithodendron wrote:
So it was a glitch in Numbers '09?
No, I think this is a GAIN in Numbers 3 .
Regards,
Ian.
Similar Messages
-
Objects (lines) and text boxes are not able to be made bigger or smaller
first of all: For no reason at all, all of my text boxes are now set up as threaded text. I dont know how that turned on. When i go to "type"
and try to select "threaded text" it wont allow me to select it - it is not highlighted. So I have no clue
how to turn this off. Now I can not stretch my text boxes to suit whats in them - ie: make them bigger or smaller, ie: there are only two boxes to drag - one at either side of text box and they wont allow me to drag them to make the box bigger - only to move the entire box (before there were 4 boxes to manipulate the size of the text box - one on each corner - now there are only two) and this seems to apply
to many other objects now. when i draw a line, I have to make sure that line is the exact right size because once i draw it - it wont allow me to make it bigger or smaller - it only allows me to move it to a different place - i dont understand what is happeningthanks for writing back
i am pretty sure it is area type because in type i can see "area type options"
i dont know how to turn bounding boxes on or off so I can not answer that question.
yes i should be able to resize the bounding text box by dragging and ive always been able to do that. however I can no longer do that. the usual bounding text box that i am accustomed to has little teeny boxes all around the entire box - in each corner - so i can drag each corner easily
this set up that has currenly taken over my illustrator program has only TWO little teeny weeny boxes that when selected wont allow me to drag them to resize at all. when i double click on one of these two little teeny boxes it gives me the thread text tool... which i dont want and have never even used before
i just want my text boxes and everything else to go back to normal so i can drag them to resize them again
does that make more sense or have i explained it better?
thanks for your help! Kim -
Acrobat Pro 9, blank lines in text boxes vanish upon save
Folks,
Since I upgraded from Acrobat Pro 8 to 9, whenever I put blank lines in a text box, the blank lines disappear as soon as the PDF is saved.
Here's an example:
- Open a PDF file
- Click on text box tool in the toolbar (or from menu Comments->Comments and markup Tool->Text box tool
- Draw a box on the PDF page somewhere
- Enter "First line", then hit Return twice to add a blank line below, enter "Second line"
- Right now my text box contains two lines of text separated by a blank line
- Hit save
- Blank line vanishes in the text box. Now the two text lines are on adjacent rows.
This did not happen in either Acrobat Pro 7 or 8. I've been using textboxes consistently for years without this silly behavior.
Any suggestions? I've looked through forums and knowledge bases and such to no avail.
I have acrobat pro version 9.0.0 running on XPSP3.
Thanks!
PetrosHello Petros,
I figured out how to make this work, at least on my computer. Hold CTRL key and hit ENTER. This leaves the space. Hope this works for you.
Phillip -
Line after text in smartforms display
Hi ,
Issue 1:
I want to display a line after a text.
Ex: Name _______________________________________
I am unable to display the line till the end of the page.
When I save and activate, the line gets shortned itself as below.
Name ___________________________
Issue 2:
I am unable to print the text that i want in bold inspite of using bold in character format.
Any suggestions?i too faced the same previously i solved it as
1).in your text element where you drag & drop your fields there itself for line what you ask
write there itself upto it enters into next line when ever it enters into next line press back space so it takes the complete window width but dont click on the edit icon and write there.
2). instead using charater format in your style create a paragraph format in bold format
Both will works.
Thanks,
Phani. -
How do I get rid of various lines around text boxes when using navigation panes
How can I get rid of these various lines that are displaying sporatically around different text boxes . . . but only when the navigation panel is displaying? I previously had the issue and changed the text box properties to no fill. It fixed the problem in the document with no navigation panel, but once the navigation panel is displayed the lines appear. And yes, I fixed the text box properties before creating the bookmarks for the navigation panel.
Every device, browser and browser version has its idiosyncrasies.
Just using a stroke and a drop shadow should not have been enough to require Muse to convert the page fill to an image. Were/are there also other effects on the page? Are the page corners slightly rounded?
Bevel and Inner Glow definitely require an image to be created. Most other effects/properties do not. -
IDCS2- How do I create lines in text boxes?
I am working on a fill-in keepsake book that has many pages of prompts followed by journal lines. i.e. "The best part of the trip was____" and "People we met___" etc. I know there is a way to create the text box so the lines fill-in around the text and look nice and even, but can't seem to find it in the help or manual. Anyone know? Thanks!
Have you tried Right align tabs with underline applied?
-
how can i add lines around a text box?
PeterBreis0807 wrote:
Sorry lupunus that information is wrong.
You are right with that.
I've mismatched the tabs.
So, go to Inspector
Graphics
Line
Sorry but I haven't English menus in pages. -
How to draw line in Text Box of crystal report
Dear all expert,
i have develop a crystal report, i need to underline the field heading. what i had done is, CTRL+U and edit my heading text. But it only underline what i type, the rest of the blank area of the field heading was not underline. how can i overcome this issues?
Thank You.Hi,
Instead of 'ctrl + u' the field, right click your text object, format text -> border -> enable the bottom with single
Thx,
Hao -
How to display multiple lines in a text box defined in steploop.
Hi,
I have a requirement to display data ( which is dynamic in nature. I determine data type,length etc dynamically) in a table format. I am using step loop for the same. I am facing a problem. Some field can be as long as 256 char long. Is there any way to display multiple lines in text box defined in a step loop so that I can display the complete string as one entity.
I can't use custom control as custom control can't be defined in a step loop or table controlI would really appreciate your help on this.
Regards,
SanjeevHello Sanjeev
Perhaps it is possible to use a <b>mixed strategy</b> consisting of a classical table control (or, even better, an ALV grid list) where you display the first 250 character of the data and next to the table control you place a simple textedit control. When the user selects one of the text fragments in the table control the entire text will be displayed in the textedit control.
Regards
Uwe -
Horizontal Line After One Section Complete
Hi,
can we pass an Horizontal Line After TEXT ITEM In New Line.
I want to display line after one part .i have three part like General Information Section ,Personal Information Section Contact Information section and Experience Section .
i want to Devided these Region using Horizontal Line.
How can i do this.
ThanksHi,
Thanks to reply me.
It's Good But Not sufficient for me.
i am using only one region and i want to devided item using Horizontal Line in Three Section .How can i do this with one region.
How to divide One region in Multiple Section and how to put item in that section.
How can i do this.
Thanks -
This is my first use of this program. How do I remove a page break? How do line up my drop down box along side the text box on the left of it? The drop down is for a multiple choice answer for the question to the left of each drop down.
See McAfee support to find out how to disable that McAfee feature - that isn't part of the normal Firefox installation.
-
How to remove blue line grid over PDF text in Adobe?
I was working on my Adobe and I pressed something like control + x or maybe a or maybe y and suddenly a small blue lines have appeared as a grid over my text. I turned off Adobe and turned it on again opening a new PDF file and the small blue line grid remains in other Adobe PDFs. What should I do? (Note I am using a MacBook Pro)
Ctrl+U ...
On Tue, Sep 23, 2014 at 11:40 PM, weird blue lines in pdf < -
Remove table border and grid lines
all,
i have and adf faces table on my page and I would like to get rid of the table border and grid lines. i tried using the inline style properties of the table and columns in the table (border-style:none;), and the GridVisible = false property of the columns, but the lines still appear.
any suggestions?
paulHi,
We can design frames in so many ways so check all those one by one
Check the output options tab in all your window, table & text nodes.there check whether Box & Shading is check or not if it is check remove it.
sometimes for vertical lines we create seperate windows with low width like 0.01 cm & in its output options check 'box and shading' frame & this window postions are as you required & you can adjust the line in the preview option of box & shading in the output options.
& in the table node table tab check the select pattren here patterns are again two types with frame & without frame.
Let me know your exact requirment & your trails if its not working.
Thanks,
Phani.
Edited by: phani kumar on Aug 26, 2008 1:56 PM -
How to get multiple row values in one text box while clicking one row from grid?
hi friends,
i am working on flex4 web application i am using one datagrid ,it have two records(bills),one button and one text box.
ex:
customername salesrepname receipt no amount
venkat raj 1102 10000
ramu ramesh 1102 20000
here both receipt no is same.now i want to select one of this receipt and click pay button which is place in outside the grid.
now my need is after click the pay button in text box i need 10000+20000=30000,after click that button i want both receipts should be invisible...'
how i will do this,
any suggession,
Thanks
B.venkatesanOne way with 10g:
select mgr,
rtrim(xmlagg(xmlelement(empno,empno||',').extract('//text()')),',') emps
from emp
where mgr is not null
group by mgr;10g:
-- define this function:
create or replace
function concatenate(c Sys_refcursor, sep varchar2 default null) return varchar2
as
val varchar2(100);
return_value varchar2(4000);
begin
-- open c;
loop
fetch c into val;
exit when c%notfound;
if return_value is null then
return_value:=val;
else
return_value:=return_value||sep||val;
end if;
end loop;
return return_value;
end;
select mgr,
concatenate(cursor(select empno from emp e where e.mgr=emp.mgr order by empno),',')
from emp
where mgr is not null
group by mgr;With 11g:
select mgr,
listagg(empno,',') within group (order by empno) emps
from emp
where mgr is not null
group by mgr; -
PowerPoint using macro to delete text boxes after printing
Hi,
We created custom shows in Powerpoint and are running a macro to insert temporary page numbers on the slides before printing. The issue is that I need to remove the page numbers after printing. I'm a novice at VBA so I'm sure there is an easy
solution, but nothing I've tried so far has been successful. The code is displayed below for your reference. Any help is greatly appreciated. Thanks!
Sub PrintCustomShow()
' Change this number to specify your starting slide number.
Const lStartNum As Long = 1
' Ask the user which custom show they want to print.
Dim strShowToPrint As String, strPrompt As String
Dim strTitle As String, strDefault As String
' See if any custom shows are defined.
If ActivePresentation.SlideShowSettings.NamedSlideShows.Count _
< 1 Then
' No custom shows are defined.
' Set up the string for the message box.
strPrompt = "You have no custom shows defined!"
' Display the message box and stop the macro.
MsgBox strPrompt, vbCritical
End
End If
' Find the page number placeholder; if found, pick up the style.
Dim rect As PageBoxSize
Dim oPlaceHolder As Shape
Dim bFound As Boolean: bFound = False
For Each oPlaceHolder In _
ActivePresentation.SlideMaster.Shapes.Placeholders
' Look for the slide number placeholder.
If oPlaceHolder.PlaceholderFormat.Type = _
ppPlaceholderSlideNumber Then
' Get the position of the page number placeholder.
rect.l = oPlaceHolder.Left
rect.t = oPlaceHolder.Top
rect.w = oPlaceHolder.Width
rect.h = oPlaceHolder.Height
' Get the formatting of the slide number placeholder.
oPlaceHolder.PickUp
' Found the slide number placeholder, so set the
' bFound boolean to True.
bFound = True
Exit For
End If
Next oPlaceHolder
' See if a slide number placeholder was found.
' If not found, exit the macro.
If bFound = False Then
' Unable to find slide number placeholder.
MsgBox "Your master slide does not contain a slide number " _
& "placeholder. Add a " & vbCrLf & "slide number placeholder" _
& " and run the macro again.", vbCritical
End
End If
' Set up the string for the input box.
strPrompt = "Type the name of the custom show you want to print." _
& vbCrLf & vbCrLf & "Custom Show List" & vbCrLf _
& "==============" & vbCrLf
' This is the title of the input box.
strTitle = "Print Custom Show"
' Use the first defined show as the default.
strDefault = _
ActivePresentation.SlideShowSettings.NamedSlideShows(1).Name
' Obtain the names of all custom slide shows.
Dim oCustomShow As NamedSlideShow
For Each oCustomShow In _
ActivePresentation.SlideShowSettings.NamedSlideShows
strPrompt = strPrompt & oCustomShow.Name & vbCrLf
Next oCustomShow
Dim bMatch As Boolean: bMatch = False
' Loop until a named show is matched or user clicks Cancel.
While (bMatch = False)
' Display the input box that prompts the user to type in
' the slide show they want to print.
strShowToPrint = InputBox(strPrompt, strTitle, strDefault)
' See if user clicked Cancel.
If strShowToPrint = "" Then
End
End If
' Make sure the return value of the input box is a valid name.
For Each oCustomShow In _
ActivePresentation.SlideShowSettings.NamedSlideShows
' See if the show is in the NamedSlideShows collection.
If strShowToPrint = oCustomShow.Name Then
bMatch = True
' Leave the For loop, because a match was found.
Exit For
End If
' No match was found.
bMatch = False
Next oCustomShow
Wend
' Get the array of slide IDs used in the show.
Dim vShowSlideIDs As Variant
With ActivePresentation.SlideShowSettings
vShowSlideIDs = .NamedSlideShows(strShowToPrint).SlideIDs
End With
' Loop through the slides and turn off page numbering.
Dim vSlideID As Variant
Dim oSlide As Slide
Dim Info() As SlideInfo
' Make room in the array.
ReDim Preserve Info(UBound(vShowSlideIDs) - 1)
' Save the current background printing setting and
' then turn background printing off.
Dim bBackgroundPrinting As Boolean
bBackgroundPrinting = _
ActivePresentation.PrintOptions.PrintInBackground
ActivePresentation.PrintOptions.PrintInBackground = msoFalse
' Loop through every slide in the custom show.
Dim x As Long: x = 0
For Each vSlideID In vShowSlideIDs
' The first element in the array is zero and not used.
If vSlideID <> 0 Then
' Add slide ID to the array.
Info(x).ID = CLng(vSlideID)
' Get a reference to the slide.
Set oSlide = ActivePresentation.Slides.FindBySlideID(vSlideID)
' Store the visible state of the page number.
Info(x).IsVisible = oSlide.HeadersFooters.SlideNumber.Visible
' Turn off page numbering, if needed.
If Info(x).IsVisible = True Then
oSlide.HeadersFooters.SlideNumber.Visible = msoFalse
End If
' Create a text box and add a temporary page number in it.
Dim oShape As Shape
Set oShape = _
oSlide.Shapes.AddTextbox(msoTextOrientationHorizontal, _
rect.l, rect.t, _
rect.w, rect.h)
' Apply the formatting used for the slide number placeholder to
' the text box you just created.
oShape.Apply
' Add the page number text to the text box.
oShape.TextFrame.TextRange = CStr(x + lStartNum)
' Increment the array element positon.
x = x + 1
End If
Next vSlideID
' Print the custom show. NOTE: You must turn background printing off.
With ActivePresentation
With .PrintOptions
.RangeType = ppPrintNamedSlideShow
.SlideShowName = strShowToPrint
End With
.PrintOut
End With
' Restore the slide information.
For x = 0 To UBound(Info)
' Get a reference to the slide.
Set oSlide = ActivePresentation.Slides.FindBySlideID(Info(x).ID)
oSlide.HeadersFooters.SlideNumber.Visible = Info(x).IsVisible
Next x
' Restore the background printing setting.
ActivePresentation.PrintOptions.PrintInBackground = _
bBackgroundPrinting
End SubHi hlolrich,
According to the description, you want to remove the shapes which created after you print the presentaion.
I suggest that you name the shape you added with some rule, then we can delete thease shapes via the name rule.
And here is a sample that you delete the shapes which name contains the
myShape words on the first slide for your reference:
Sub deleteShapes()
For Each aShape In Application.ActivePresentation.Slides(1).Shapes
If InStr(aShape.Name, "myShape") Then
aShape.Delete
End If
Next aShape
End Sub
Also you can learn more about PowerPoint developing from link below:
How do I... (PowerPoint 2013 developer reference)
PowerPoint 2013
Regards & Fei
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.
Maybe you are looking for
-
Foriegn Currency diff in Parellel currencies.
Hi all, I have a typical issue. My CC curr INR, 2nd LC USD, and 3rd LC SGD We use FM-Commitment items for budgeting and CO-IO for cost collection. FM area curr USD, so the budgets for the commitment items were maintained in USD ISSUE PO: PO created f
-
Error while opening the offer letter.
Candidate has applied for a vacancy and offered.But when trying to view offer from offers workbench the offer letter does not show up....we get an error page. plz suggest if m missing some profile option or anything
-
How to set the encoding of an XML-document
I need to change the encoding of an xml-document. When I convert the document into a string, UTF-8 is used, I want to use ISO-8859-1.
-
How to get the Background job name
Hi, I am executing a report in background and i want to get the background job name in the same report program. How can i get the same. Regards, Rajgopal Dara.
-
Do I need to shut DB when using Veritas Backup Exec 10d w/ Oracle agent?
Hi All, Do I need to shutdown oracle when we back up the database server using Veritas Backup Exec 10d with the Oracle agent? thanks.