GRN With 2line items(material,batch same)one inspection lot for 2line items

Dear Experts
As and when we make a GRN with 2 line items and same batch number we enter no. of containers differently but only the number from the first line item is flowing into the Inspection lot origin.We are creating only one inspection lot for 2 line items as the batch number is same for the items.
1. In material master i have given 01 inspection type ( with control inslot.. Each material document,batch, storage location) :---
this is the reason system is creating only one inspection lot.
i am entering manually same batch number for 2line items...
Here my problem is ... while giving UD... SYSTEM IS PICKING ONLY FIRST LINE ITEM NO.OF CONTAINER... IT HAS TO BE BOTH LINE ITEMS CONTAINERS.... IT IS PICKING BOTH LINE ITEMS QUANTITY... NO.CONTAINER ONLY IT IS NOT PICKING....
Waitting for  experts reply

Hi,
As per your query if you put in MM forums then you will get the reply immly.
Anil

Similar Messages

  • One inspection lot for multiple materials of purchase order line items

    Hi All,
    My client requirement is one inspection lot for multiple materials of purchase order line items.
    Please share your thoughts.
    Thanks in advance for early reply.
    Regards,
    Jishu

    I totally agree with Amol.
    I don't think I would touch that development nor would I ever tell a client it could reliably be done through development.
    Knowing what I know about the table structures, I don't think you could create any development for this that could use a significant amount of the existing tables and functionality.  I think you'd have to create all your own Z tables and basically rebuild the functionality.  Tying it back in with SAP data will be difficult.
    You're even looking at all custom screens for your results recording and UD as well.  And if you have follow-on functions like batch classification requirements, batch determination, COA publication, results copy functions, use of DMR and sampling procedures, physical samples, quality notifications, etc. etc.. you could be looking a whole lot of development.
    Craig

  • Creation of one inspection lot for more than 1physical sample

    hello SAP,
    we have one common question.I have created 3 physical sample 20000006,2000007,2000008 and now i want to create one inspection lot for these 3 physical sample through QPR5 Transaction but system is generating each inspection lot for each physical sample which is wrong process. this is common scenario for most of the industry.SO please clarify and provide the solution

    Hi,
    I hope this solution gives some way out for you to solve your problem . I assume the sample is for  the same material , phy. sample type and category
    Create a new physical-sample drawing with refernce to :
    Using this function, you can create a new physical-sample drawing (with one or more physical samples) that references:
    An inspection lot
    A production order or process order
    A production version
    You use this function to create physical samples that have not been planned in a sample-drawing procedure and which you can draw from a production process according to your specific needs. In an inspection during production, for example, you can draw physical samples from the process on the basis of time or quantity (for example, a physical sample every three hours or for every 1000 liters of material produced). You can freely specify the inspection-relevant operations in which you want to inspect the physical samples for the new physical-sample drawing.
    please do let us know wether you were able to create one inspection lot .Or else please ellaborate the question step wise t-code and functions Will try to find a solution .
    cheers
    kp
    source of information : SAP

  • One inspection lot for all GR per day.

    Hi,
    Presently when I am doing GR for a material system generates a inspection lot per GR.But when I am doing GR for same material several times per day system should generate inspect lot once only.or if material belongs to same supplier also it should generate one lot for that day .how to do with dynamic modification rule?  
    manoj

    hi
    1. if same material per day-one lot
    Create a DMR with Reset period 1 day.
    Two stage DMR with First stage : Inspection 1
                                      Second stage: 99 skip reset 1 day.
    Now apply this DMR in task list Header.
    Go to QA16 and set auto UD after Every 30 mins for 01 inspection type.
    Also QCC0->Basic setting>plant level>Insp lot completion>Auto UD-->
    maintain 30 mins here for skip & auto ud
    this will create first lot every day & will come to inspection.
    from second lot all lots will come to QI but stock posting will be done by system.
    2.if same vendor material -one lot
    in QP01>material Assignment>enter vendor material combination  here.
    rest of the things will remain same.
    Regards
    Sujit

  • Enhancement-One inspection lot for early lot and serial profile

    Hi,
    I have a requirement shown below.
    Can anyone guide me to proceed this Enhancement from the start?
    Inspection lot for production order is created at production order release, when the finished good has a serialnumber profile assigned in the materials master and the serialnumbers are captured in the handling unit assigned to the production order, the system will create another inspection lot.
    <i>Required system enhancement:</i>
    Only 1 inspection lot per production order should be generated.
    <b>NB.</b> Without this enhancement both inspection lots created for the production order have to be closed to be able to close the production order.

    Please try with sub-routine: userexit_move_field_to_lips or userexit_save_document of include: MV50AFZ1.
    I guess clearing LIPS-QPLOS for specific conditions would do the trick for you..
    <b>Reward points</b>
    Regards

  • Clear inspection lot for defect items

    Hi All,
    What is the process if i found the inspection lot have defect
    how do i create the notification .and result. after moved it to blocked stock.
    how can i close the nodification and change the result and do the ud for the lot.

    Hi
    What is the process if i found the inspection lot have defect
    If inpsection lot have defect then,You can go to defect recording & record the defect against operation or nspection lot or against a MIC.
    Every Defect has defect class which will decide whether the notification os to be kept open or close after UD is taken.
    This is part of customization.
    how do i create the notification .and result. after moved it to blocked stock.
    While creating inspection type in customization through QCC3--> Inspection lot creation >Idefine insp types->say 01 inspection type here maintain F2 type of defualt notification which will trigger after defect is recorded.
    You can record the results.Then from UD stock posting screen in QA11/QA32 you can post material to block stock.This is also possible through action box of notification.
    how can i close the nodification and change the result and do the ud for the lot
    Once Defect are reorded you can go to notification.Assign the Tasks to Users.Complete the tasks ^ sucessfuly close it.Check the status of all task must be TSCO TSSC.
    You need not to change the results recorded again after material is OK as this is First yield of the lot.
    Then move material form Block stock through notification. & close the notification.
    I hope this will help
    Regards
    Sujit

  • One inspection lot

    Hi Guru,
    How to create one inspection lot for one production order.
    regards,
    Rakesh Patel

    Hello Rakesh,
    Explore 'early lot creation' option in material master inspection type setting . But will you have single batch per inspection lot ?
    Cheers
    Kaushik

  • Do I need to buy a new printer, dedicated for my Mac or can I use the same one we use for our PCs?

    Do I need to buy a new printer, dedicated for my Mac or can I use the same one we use for our PCs?

    Hello stacksofamber and welcome to Apple Support Communities,
    You should be able to find a Mac OSX driver for that printer. Did you check with the manufacturer/'s website?

  • Our granddaughter has a ipod. She's getting a iphone and a mini idpad.  what is the best way to set them up. Does she need a new apple id and password or would she use the same one she has for her ipod

    our granddaughter has a ipod. She's getting a iphone and a mini idpad.  what is the best way to set them up. Does she need a new apple id and password or would she use the same one she has for her ipod

    Just use the same one on all devices.

  • Wrong batch populated on Inspection lot

    Recently we came across the following issue.
    GR have been posted for two by-products(mvt type 531) for a process order within a gap of 6 minutes. Since 05 inspection type was active for both the by-products, two inspection lots were created for two material documents. The batch updated in second inspection lot is same as first inspection lot (Tcode: QA03, Table: QALS). But the batch updated in the corresponding material document is different one (Tcode: MIGO, Table: MSEG). Even the batch in inspection lot is not created in the system (Tcode: MSC3N, Table: MCH1, MCHA).
    Batch level is "Batch unique at material level".
    Have anyone of you came across this issue? Please reply with your thoughts and experience.

    No. We don't have split valuation. I am giving you example of issue . I am trying to search mat A and batch 100 in system but I didn't find in MCH1,MCHB,MCS3N. In short batch not created for particular mat and batch combination . When I searched inspection lot for both mat and batch combination then I found . This inspection lot is created after GRN for by product , movement type 531 , inspection type 05.When I saw batch in material document it is 101 instead of 100 .
    Question
    1. If batch 100 is not created for mat A then why it is showing on inspection lot header ?
    2. If batch in mat document is 101 then actually same batch should show on inspection lot header .How come batch 100 populating on inspection lot header ?
    Thanks ,

  • Single Inspection lot for multiple line items.

    Hi,
      We have a scenario while receiving goods.We receive boxes and want to print labels.For eg we have a Purchase Order and receive 10 Items and a material document is created for 10 qty and a Inspection lot is created.
    Since we want to print a label for each item we propose to create a line item on a GR thus creating 10 line items.
    The problem is we get 10 Inspection Lots which we dont want.
    Our requirement is to print 10 labels by having ...
    1.One material Document with QTY 10 and one Inspection Lot with QTY 10.
    2.Have 10 line items in GR to print lables but have one Inspection Lot.
    We do not have batch management activated.
    Thanks in advance for help.
    Regards
    SM

    Hi SM,
    It's very easy,
    If I am not wrong you are asking about the inspection type 01, correct?
    Then go to material master->Qm view>Inspection set up---> now for the detailed information for inspection type 01,, set the option "FOR EACH MATERIAL, BATCH AND STORAGE LOCATION" ( i know you are not batch managed but set this option) for the field "Control InsLot"
    Have the fresh PO and then GR, system will do exactly as you asked for,
    Regards,
    Shyamal

  • Automatic creation of inspection lot for Expired Batches

    Hi All,
    I am in one trouble and need some help in above scenario.
    I am able to create inspection lot for batches about to expire, but how to create inspection lots for batches which were already expired or which next inspection date already missed?
    Master data like '09' inspection type, inspection plan is already maintained.
    Second question, is QA07 also affect on special stocks like vendor stock or project stock etc?
    Immediate response will be appreciated.
    Thanks

    Hi
    To meet you above mentioned requirement you have to modify the program RQAAAS10 as per your logic both to create lot for Expired Material and to consider project stock or vendor stock as In standard SAP these stock are not considered.
    regards
    Manish

  • System should create only one Inspection Lot

    Hi,
    My client has following requirement.
    I have ten Line item in Po, after MIGO system generate one GRIN no and 10 inspection lot for every line item but my client need only one inspection lot no. having 10 line items in thatu2026 how to do this.
    Regards.
    Arun

    Sorry.  In SAP incoming inspection are driven by the material numbers. 
    If QM is on for the material, you will get an inspection lot.  If you have ten different materials in a Purchase order and all ten require inspection then you will get ten inspection lots.
    That is the way it is. 
    You could use a user exit to determine if an inspection lot for the PO has been created for the purchase order already and suppress the creation of any additional ones if you want.  But the one created will be for the first material in the purchase order, not the receipt itself.
    FF

  • QM Lot for Defect Items

    hi guys,
    Inspection lot for FERT were created, results recording was done for the lot qty (20 Nos), and 18 nos were accepted.
    For the balance 2 nos defects recording was done and notification was raised (q3), then qm order was raised via notification.
    my problem's are
    when will be new lot created for balance 2 nos?
    how to confirm the qm order?
    i.e, some consumbles and activity (Lbr hrs) were used, i need to confirm the same and close the order,
    pnts will be given
    tks
    murali

    Are we talking about an 04 lot?  If so, you would post the 18 to unrestrcited and the other two to "Other material" where you would post it to another batch.
    Craig

  • Inspection Lot for Material Group (without Material Code)

    Hello,
    We need to create Inspection Lots (either manually or automatically while Goods Receipt) without particular material reference. Scenario is that Vendors send the materials (as text, through some material group) and we need to inspect these materials.
    How is this possible?
    Puneet

    I hope you can also proceed in the following way:
    When a sample is received, create Notification and thru the Action Box Item you can create an Inspection Lot without Material Number as we normally do in case of Stability Studies...Please explore this option as well.
    Best Regards,
    K. Raghavendra Nayak

Maybe you are looking for

  • FI MM integration with purchase requisition

    Hi, For FI MM integration - acquire asset through MM - the process is - 1) create asset master 2) Purchase requisition 3) PO 4) Assign asset master to PO 5)Goods receipt It is difficult to create an asset master in advance, so the solution is to crea

  • How to use files in packages?

    Suppose I have java source files in directory c:\aaa\bbb\ccc In each java source file I have "package aaa.bbb.ccc;" statement Now I am in C:\ how do I compile and run the files? I use javac aaa\bbb\ccc\*.java then to run java aaa\bbb\ccc\App.class Ap

  • Long Text in Crystal Report for Enterprise 4.0

    Hello, I am creating a report using SAP Crystal Report for Enterprise 4.0 (Version 14.0.2) and the source of data is BEx query via OLAP connection created using IDT. I am using SAP BusinessObjects BI platform 4.0. The Characteristic (which is hierarc

  • Jar file for the type StaleConnectionException

    Hi, Any idea where or in which jar i can find the type StaleConnectionException in a Websphere Studio Application Develper 5.0 installation. Thanks

  • When i 'save for web and devices' in illustrator, the resulting jpg is cropped

    Has anyone run into this before?  I'm trying to 'save for web and devices" in illustrator, but the resulting jpg doesn't show the whole artboard.  its cropped off some of the top and bottom.  my file is a simple box with text inside.  no other graphi