Group Mailer error
Hi
I am trying to set up a workflow to simply send the same email newsletter to a group in the address book.
The workflow looks like this:
New mail message
Find groups in Address Book
Group Mailer
Send outgoing messages
Everything works until the Group mailer stage. The messages are created with the correct addresses and text but Group mailer encounters an error: AppleEvent handler failed. (430531728)
This seemingly simple, time saving task is turning out to be neither.
Anyone help?
Thanks
Chris
it's a known bug in the Group mailer action. i don't know any workaround, sorry. the bug has been fixed in Snow leopard.
Similar Messages
-
I dont receive e-mails with attachment sent to OS X Server 3.0.1 Group-mailing lists
I have a small company using a mac mini with mavericks and server 3.0.1.
We are using most of the services available in OS X server (except DHCP, Netinstall and Xsan). One of the services we use the most is Mail server, and the whole company uses that as our primary mail server.
We have set up several different Groups and activated group-mailing lists on some of them. The setup has been working very good for over a year (started using it with Mountain Lion Server).
Recently I was going to send a christmas card to all employees using the workgroup mailing list. I was using the stationaries in Mail, and it was sent as normal but never recieved by me or any of the other employees. Below is the SMTP Log
Dec 6 17:10:16 server.mydomain.com postfix/smtpd[29101]: connect from unknown[10.0.1.16 *<- my local IP address*]
Dec 6 17:10:16 server.mydomain.com postfix/smtpd[29101]: 480451503B0A: client=unknown[10.0.1.16 *<- my local IP address*], sasl_method=CRAM-MD5, sasl_username=myusername
Dec 6 17:10:16 server.mydomain.com postfix/cleanup[29109]: 480451503B0A: message-id=<[email protected]>
Dec 6 17:10:16 server.mydomain.com postfix/qmgr[23288]: 480451503B0A: from=<[email protected]>, size=98063, nrcpt=1 (queue active)
Dec 6 17:10:16 server.mydomain.com postfix/local[29110]: 480451503B0A: to=<[email protected]>, relay=local, delay=0.13, delays=0.05/0.01/0/0.08, dsn=2.0.0, status=sent (delivered to command: /Applications/Server.app/Contents/ServerRoot/usr/libexec/MailService/list_serve r_post post workgroup)
Dec 6 17:10:16 server.mydomain.com postfix/qmgr[23288]: 480451503B0A: removed
Dec 6 17:11:16 server.mydomain.com postfix/smtpd[29101]: disconnect from unknown[10.0.1.16 *<- my local IP address*]
I did some trial and error and it seems like it is linked to the fact that I have attachments to the email. Sending an email with only text is recieved like normal. Even attacment like PDF or jpg is "blocked" it seems. I have tried using email outside my domain but still the same result. Sending the same email (with attachment) to all reciepients (not using the mailiing list) works and is recieved by everyone. I have turned off all email filtering settings on the server but still the same result.
Is anyone else experiencing the same problem? My guess is that this is a Server 3.0.1 hickup, so it would be nice to get confirmation from others experiencing the same.Troubleshooting Apple Mail
What does Mail/Window/Connection Doctor Show? If the server is red, select it and look at the Show Details box.
Troubleshooting sending and receiving email messages
Troubleshooting sending email messages -
Another newbie WIN Mail Errors
Sorry if this is not the correct board - it is my first visit.
For weeks now, I've been pulling out my hair rotating from Verizon to HP to msn to windows tech support over this:
In any website, clicking their 'Contact Us' button or forwarding anything form there, I always got a windows mail popup "Error 0x800CCCf0; Windows could not send . After many calls and re-settings, an HP tech told me today to just use Windows Live instead. This brings up a new error:
"Unable to send or receive messages for the Msn (z7udumm) (1) account. There was an unexpected error and Windows Live Mail can't sync the messages in your Hotmail account. To sync your messages, in Windows Live Mail, remove your Hotmail account and then add it again. To view messages in your Hotmail account, go to http://hotmail.live.com on the Web.
Server Error: 4102
Server Response: Object with Id caaa4357-f436-49ec-91df-cdaedff6117f appears in more than one command
Server: 'http://mail.services.live.com/DeltaSync_v2.0.0/Sync.aspx'
Windows Live Mail Error ID: 0x8DE00001"
From where do I remove/ readd the Hotmail account? What does all of this gobbledigook mean? Can anyone help? Thank you very muchWell, it's pretty much designed and meant to be a single-user machine, at least so far. There is only one Contacts app which, of course, feeds and drives everything else.
You can easily import your whole Address Book into hers and then sync that one to the iPad. That might result in some duplication but that's not too serious a problem, I hope. Arrangement details, Groups and etc., will have to be negotiated also.
And as you suspected no, it's not tethering. Think of them as being linked, via iTunes, for syncing purposes. -
Group Mailer ~ There is no outgoing Mail message. (-2700)
Hi
I am attempting to use the group mailer function in automator.
I have tried a variety of different work arounds with the same effect.
The process I have created has four stages:
1) Get Specified Address Book Items
2) Group Mailer
3) Get Specified Mail Items
4) Send Outgoing Messages
I have tinkered with the order of stages and with the 'ignore previous results' as suggested on other forums - all to no avail.
The Action reaches Stage 2 (Group Mailer) and then stops with the error message There is no Outgoing Mail Message (-2700).
Can anyone shed any light on this?
Thank you, in advance
AdamSorry about that. The one I sent was not the latest version. This one addresses the repeated asking for file attachments and the automatic message sending issues.
Here is the latest version:
click here to open this script in your editor<pre style="font-family: 'Monaco', 'Courier New', Courier, monospace; overflow:auto; color: #222; background: #DDD; padding: 0.2em; font-size: 10px; width:400px">property GreetingWanted : ""
property theGreeting : ""
property GreetingNameOrder : {"First and Last Name", "First Name Only", "Last and First Name", "Last Name Only"}
property theCompleteGreeting : ""
property theSubject : ""
property theContent : ""
property FileAttached : ""
property theAttachment : ""
on run {input, parameters}
set theNumberOfInputItems to count of items in input
set CountOfAttachments to (count of items in input) - 2
-- Gather Contact Info
tell application "Address Book"
set theEmailGroup to last item of input
set FirstNames to first name of people of theEmailGroup
set LastNames to last name of people of theEmailGroup
set EmailAddresses to value of email 1 of people of theEmailGroup
end tell
-- Generate emails
tell application "Mail"
-- Email info
set theSubject to subject of first item of input
set theMessage to content of first item of input
set theAttachments to items 2 thru (CountOfAttachments + 1) of input
-- Greeting info
display dialog "Would you like to add a greeting?" buttons {"Yes", "No"} default button 1
if button returned of the result is equal to "Yes" then
set GreetingWanted to true
display dialog "Please enter the opening for the greeting." default answer "Dear "
set theGreeting to text returned of the result
set GreetingName to (choose from list GreetingNameOrder with prompt "Please select the choice of name for the greeting" default items item 1 of GreetingNameOrder) as text
else
set GreetingWanted to false
end if
-- File Attachment info
display dialog "Would you like to add a file attachment(s)?" buttons {"Yes", "No"} default button 1
if button returned of the result is "Yes" then
set FileAttached to true
else
set FileAttached to false
end if
repeat with i from 1 to count of EmailAddresses
if GreetingWanted then
if (GreetingName = item 1 of GreetingNameOrder) then set theCompleteGreeting to theGreeting & item i of FirstNames & space & item i of LastNames
if (GreetingName = item 2 of GreetingNameOrder) then set theCompleteGreeting to theGreeting & item i of FirstNames
if (GreetingName = item 3 of GreetingNameOrder) then set theCompleteGreeting to theGreeting & item i of LastNames & space & item i of FirstNames
if (GreetingName = item 4 of GreetingNameOrder) then set theCompleteGreeting to theGreeting & item i of LastNames
if GreetingName = false then set theCompleteGreeting to theGreeting
set theCompleteContent to theCompleteGreeting & "," & return & return & theMessage & return
end if
-- Generate email
set email to make new outgoing message with properties {subject:theSubject, content:theCompleteContent, visible:true}
tell email to make new to recipient with properties {address:item i of EmailAddresses}
-- Add attachments
if FileAttached then
my MoveToEndOfContent()
repeat with i from 1 to CountOfAttachments
tell email to make new attachment with properties {file name:item i of theAttachments}
end repeat
end if
send email
end repeat
end tell
return input
end run
on MoveToEndOfContent()
tell application "System Events"
tell process "Mail"
keystroke "a" using command down
key code 124 -- right arrow
keystroke return
keystroke return
end tell
end tell
end MoveToEndOfContent
</pre>
There are a few other refinements that could be added:
1) Avoiding the asking if attachments want to be added by checking whether there were any assigned in the Automator "Get Specified Finder Items" dialog;
2) There is a rather annoying bounce/notification by Automator after the initial "New Mail Message" action. Gathering all the information first and then creating a template with the "New Mail Message" action would avoid this annoyance. Unfortunately, as you know, I am using that action as a quick way to gather the subject, message, and account information.
3) Rename the actions by using a Ctrl click on the action title bar to more clearly indicate what information is being requested in the dialogs.
PowerBook 12" Mac OS X (10.4.8) -
Cannot enable group mailing list
Hi,
Running 10.5.2 server on Xserve, server acts as OpenDirectory master and Mail sever.
We have a normal mail service running fine, but trying to enable the "Mailing List" option for groups results in an error.
"Error of type eDSInvalidAttributeType (-14131) on line 733 of /SourceCache/WorkgroupManager/WorkgroupManager-319/Plugins/GroupAccounts/GroupB asicPluginView.mm"
Web service is enabled, and appears as the option for the dropdown "Enable services for this group on:", but even just choosing the server from the dropdown and attempting to save the config (without turning on any services) results in this error.
Can anyone help with what this means?
Thanks,
SamHi,
In Mail service -> General -> ensure "Enable SMTP" is checked,
if you don't desire to send outgoing from clients then don't select any authentication methods in Mail Service -> Security -> SMTP,
In Mail service ->Mailing Lists ensure that "Enable server group mailing lists" is checked,
once that is done, per website -> Web Services ensure "Mailing List web archive" is checked if you want mail to appear on the website,
For each group ensure "Mailing list" is checked, and "Mailing List web archive" if you want the group email repository on the website.
At least one group member should have an email account or a Forward to email address for the mail to go somewhere, assuming Web archive is not selected.
Send an email to the group address at [email protected] and look in the SMTP log for teamsserver to receive the email and then forward to individual addresses.
Hope this helps,
Harry -
Automator bug in Group Mailer action
Hello, I think there's a bug with the Group Mailer action. The first time I ran the workflow it only worked partially. Not all the mails included the email message. When I ran the workflow again it only included the greeting and completely left out the email Message from the "New Mail message" action.
I have the following workflow setup:
New Mail Message
Get Specified Address Book Items
Group Mailer
Send outgoing mail
The workflow will include the email message if I deselect the "add greeting" from the "Group Mailer" action. But then I won't have the personal greeting. I might as we'll use "bc" in the email instead of using Automator.
Please help.
Thanks.The workflow works with some restrictions only to be found by trial and error (i bought SerialMailer to avoid further irritation).
I translated the workflow commands from Dutch into English, excuse if me I do not use the correct wording.
First [create new mail message] (You cannot use any formatting or import text, result panel will show mail)
Next [Search address book groups] (Results panel should show the group)
Then [send e-mail to group] (you can use the "dear" etc check box
a bubble will connect the search group and send e-mail box
Finally [send outgoing mail].
You cannot select a concept mail in your Apple Mail, Automator needs to create one and Automator will put it in the outgoing mailbox (this box you cannot reach as user, it is hidden!).
Good luck -
Can not receive Mac mail -error Outlook cannot find the server. Verify the server information is entered correctly in the Account Settings, and that your DNS settings in the Network pane of System Preferences are correct. Account name: "MacMail"
What are the correct mail account settings and more importantly the correct DNS settings
Thank you for any help you may be able to provide
Cheers
Chris (iMac i7)Do not delete the old account yet. sign up for an iCloud account if you haven't.
I understand .mac mail will still come through. Do not delete the old account yet.
You cannot use .mac or MobileMe as type of Account, you have to choose IMAP when setting up, otherwise Mail is hard coded to change imap.mail.me.com to mail.me.com & smtp.mail.me.com to smtp.me.com, no matter what you try to enter.
iCloud Mail setup, do not choose .mac or MobileMe as type, but choose IMAP...
On second step where it asks "Description", it has to be a unique name, but you can still use your email address.
IMAP (Incoming Mail Server) information:
• Server name: imap.mail.me.com
• SSL Required: Yes
• Port: 993
• Username: [email protected] (use your @me.com address from your iCloud account)
• Password: Your iCloud password
SMTP (outgoing mail server) information:
• Server name: smtp.mail.me.com
• SSL Required: Yes
• Port: 587
• SMTP Authentication Required: Yes
• Username: [email protected] (use your @me.com address from your iCloud account)
• Password: Your iCloud password
Also, you must upgrade your password to meet the new criteria: 8 characters, including upper and lower case and numbers. If you have an older password that does not meet these criteria, when you try to setup mail on your mac, using all of the IMAP criteria listed above, it will still give a server error message. Go to http://appleid.apple.com then follow directions to change your password, then go back to setting up your mail using the IMAP instructions above.
Thanks to dpepper...
https://discussions.apple.com/thread/3867171?tstart=0 -
Is it possible to install an SMTP proxy that will handle splitting group mail?
I am running OS X 10.9.3 with Server 3.1.2 on a Mac-Mini Mid-2012. I learned on my last implementation of OS X 10.9.3 that Mavericks sometimes has issues with handling group mail. As I rebuild my network, I am wondering if it is possible to install a SMTP proxy that can receive, process, then forward mail on to the primary mail server.
For example, if mail is sent to a group account, this SMTP proxy would repackage the message as a message to a carbon copy list of all the group members, but if the mail is sent to a user account, the mail is forwarded unmodified. Like this:
As an alternative to this, I would also be interested a solution in which the Linux Mail Server referenced the Open Directory for account information, including password authentication, so that if a user in the Mac Network updates his password, that he can use the same password to access his mail on a webmail client or via the Mail.app.
This is a callout for discussion points, ideas and recommendations. There is no problem here to fix necessarily.I am not aware of a tool to do the group splitting for you, this is normally the responsibility of the mail server itself.
However with regards to your second query, a lot of people use a product called Kerio Connect instead of Apple's Mail server. Kerio can run on the same Mac server but in general is a far more powerful mail server. It does include the ability to authenticate user accounts against Open Directory.
There is one issue you need to be aware of, like nearly all mail servers it uses the 'username' as the main email address, so if you want an email account of [email protected] then your Open Directory short name need to be jsmith, if you want your email address to be [email protected] then your user short name needs to be john.doe and so on.
Note: While I have specifically talked about Kerio most other mail server including those for Linux would be able to link to Open Directory via LDAP and authenticate email accounts. The same link between email address and short name would usually apply. -
How to create a group mailing list in JavaMail?
Hello,
I've been searching through the entire API, specifically the InternetAddress class and I can't seem to find out how to create a group/mailing list. Does anyone know how to do this?
That is, I would like to be able to group a bunch of e-mail addresses together and give that group a name "my friends". Then send it off using this 'group mail address' as opposed to an array of InternetAddress[]. Then when the recipients receive the e-mail, they see "my friends" in the To: field, instead of everyone's e-mail address...
Is this possible in JavaMail? I've tried many things like creating an InternetAddress object passing in a comma-delimited list of e-mail addresses but it doesn't like it.
Thanks in advance!Hi:
I have the same problem. I've read JavaMail implements RFC 822 which allow mailing lists. But, �how can I implement it with JavaMail?
Best regards,
Fabio Galarraga. -
How to create a group mailing list?
how to create agroup mailing list?
i have followed instructions on "how to create a group mailing list" & get a total blank when i hit return after entering the group name in addressee column. this is after i created a new group under address book, & then drug over individual names into the group. what am i doing wrong?
-
File To Mail - Error in sender CC
Hi All,
I am trying out a File to mail scenario following the Blog /people/michal.krawczyk2/blog/2005/03/07/mail-adapter-xi--how-to-implement-dynamic-mail-address
I am getting the following error in the File Sender Comm Channel :
Mail: error occurred: com.sap.aii.af.mp.module.ModuleException caused by: com.sap.aii.messaging.srt.BubbleException: Failed to call the endpoint [null "null"]; nested exception caused by: java.io.IOException: no sender address specified
I could also see the payload is empty in the Receiver Mail CC
Now can anybody help getting me the mail ...
Thanks in advanceHi Bhavesh,
I get a checkered flag in Moni ,
But the response has only SOAP header and Body with out payload , I Mail package is checked and base64 is selected ..
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- <!-- Response
-->
- <SAP:Trace xmlns:SAP="http://sap.com/xi/XI/Message/30">
<Trace level="1" type="T">Party normalization: sender</Trace>
<Trace level="1" type="T">Sender scheme external = XIParty</Trace>
<Trace level="1" type="T">Sender agency external = http://sap.com/xi/XI</Trace>
<Trace level="1" type="T">Sender party external =</Trace>
<Trace level="1" type="T">Sender party normalized =</Trace>
<Trace level="1" type="T">Party normalization: receiver</Trace>
<Trace level="1" type="T">Receiver scheme external =</Trace>
<Trace level="1" type="T">Receiver agency external =</Trace>
<Trace level="1" type="T">Receiver party external =</Trace>
<Trace level="1" type="T">Receiver party normalized =</Trace>
<Trace level="1" type="B" name="CL_XMS_HTTP_HANDLER-HANDLE_REQUEST" />
- <!-- ************************************
-->
<Trace level="1" type="T">XMB was called with URL /sap/xi/engine?type=entry</Trace>
<Trace level="1" type="T">COMMIT is done by XMB !</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-ENTER_XMS" />
- <!-- ************************************
-->
<Trace level="1" type="B" name="CL_XMS_MAIN-SET_START_PIPELINE" />
- <!-- ************************************
-->
<Trace level="1" type="B" name="SXMBCONF-SXMB_GET_XMB_USE" />
<Trace level="1" type="B" name="CL_XMS_TROUBLESHOOT-ENTER_PLSRV" />
<Trace level="1" type="T">****************************************************</Trace>
<Trace level="1" type="T">* *</Trace>
<Trace level="1" type="T">* *</Trace>
<Trace level="1" type="T">XMB entry processing</Trace>
<Trace level="1" type="T">system-ID = XIL</Trace>
<Trace level="1" type="T">client = 002</Trace>
<Trace level="1" type="T">language = E</Trace>
<Trace level="1" type="T">user = PIAFUSER</Trace>
<Trace level="1" type="Timestamp">2006-09-14T09:48:04Z CET</Trace>
<Trace level="1" type="T">* *</Trace>
<Trace level="1" type="T">* *</Trace>
<Trace level="1" type="T">****************************************************</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-CALL_UC_EXECUTE" />
- <!-- ************************************
-->
<Trace level="1" type="T">Message-GUID = 1DC20B0043D611DBC937000D60D4EDB5</Trace>
<Trace level="1" type="T">PLNAME = CENTRAL</Trace>
<Trace level="1" type="T">QOS = EO</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PIPELINE_ASYNC" />
- <!-- ************************************
-->
<Trace level="1" type="T">Get definition of external pipeline = CENTRAL</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-LOOKUP_INTERNAL_PL_ID" />
<Trace level="1" type="T">Get definition of internal pipeline = SAP_CENTRAL</Trace>
<Trace level="1" type="T">Queue name : XBTI0009</Trace>
<Trace level="1" type="T">Generated prefixed queue name = XBTI0009</Trace>
<Trace level="1" type="T">Schedule message in qRFC environment</Trace>
<Trace level="1" type="T">Setup qRFC Scheduler OK!</Trace>
<Trace level="1" type="T">----
</Trace>
<Trace level="1" type="T">Going to persist message</Trace>
<Trace level="1" type="T">NOTE: The following trace entries are always lacking</Trace>
<Trace level="1" type="T">- Exit WRITE_MESSAGE_TO_PERSIST</Trace>
<Trace level="1" type="T">- Exit CALL_PIPELINE_ASYNC</Trace>
<Trace level="1" type="T">Async barrier reached. Bye-bye !</Trace>
<Trace level="1" type="T">----
</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_TO_PERSIST" />
- <!-- ************************************
-->
<Trace level="1" type="B" name="CL_XMS_MAIN-PERSIST_READ_MESSAGE" />
<Trace level="1" type="T">Note: the following trace entry is written delayed (after read from persist)</Trace>
<Trace level="1" type="B" name="SXMS_ASYNC_EXEC" />
- <!-- ************************************
-->
<Trace level="1" type="T">----
</Trace>
<Trace level="1" type="T">Starting async processing with pipeline CENTRAL</Trace>
<Trace level="1" type="T">system-ID = XIL</Trace>
<Trace level="1" type="T">client = 002</Trace>
<Trace level="1" type="T">language = E</Trace>
<Trace level="1" type="T">user = PIAFUSER</Trace>
<Trace level="1" type="Timestamp">2006-09-14T09:48:04Z CET</Trace>
<Trace level="1" type="T">----
</Trace>
- <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PIPELINE_SYNC">
<Trace level="1" type="T">Get definition of external pipeline CENTRAL</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-LOOKUP_INTERNAL_PL_ID" />
<Trace level="1" type="T">Corresponding internal pipeline SAP_CENTRAL</Trace>
- <Trace level="1" type="B" name="PLSRV_RECEIVER_DETERMINATION">
- <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV">
- <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV_LOCAL">
- <Trace level="1" type="B" name="CL_RD_PLSRV-ENTER_PLSRV">
<Trace level="1" type="T">R E C E I V E R - D E T E R M I N A T I O N</Trace>
<Trace level="1" type="T">Cache Content is up to date</Trace>
</Trace>
</Trace>
</Trace>
</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_LOG_TO_PERSIST" />
- <Trace level="1" type="B" name="PLSRV_INTERFACE_DETERMINATION">
- <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV">
- <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV_LOCAL">
- <Trace level="1" type="B" name="CL_ID_PLSRV-ENTER_PLSRV">
<Trace level="1" type="T">I N T E R F A C E - D E T E R M I N A T I O N</Trace>
<Trace level="1" type="T">Cache Content is up to date</Trace>
</Trace>
</Trace>
</Trace>
</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_LOG_TO_PERSIST" />
<Trace level="1" type="B" name="PLSRV_RECEIVER_MESSAGE_SPLIT" />
- <!-- ************************************
-->
- <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV">
- <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV_LOCAL">
<Trace level="1" type="B" name="CL_XMS_PLSRV_RECEIVER_SPLIT-ENTER_PLSRV" />
- <!-- ************************************
-->
<Trace level="1" type="T">number of receivers: 1</Trace>
<Trace level="1" type="T">Single-receiver split case</Trace>
<Trace level="1" type="T">Post-split internal queue name = XBTO3___0001</Trace>
<Trace level="1" type="T">----
</Trace>
<Trace level="1" type="T">Persisting single message for post-split handling</Trace>
<Trace level="1" type="T" />
<Trace level="1" type="T">Going to persist message + call qRFC now...</Trace>
<Trace level="1" type="T">NOTE: The following trace entries are always lacking</Trace>
<Trace level="1" type="T">- Exit WRITE_MESSAGE_TO_PERSIST</Trace>
<Trace level="1" type="T">Async barrier reached. Bye-bye !</Trace>
<Trace level="1" type="T">----
</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_TO_PERSIST" />
- <!-- ************************************
-->
<Trace level="1" type="B" name="CL_XMS_MAIN-PERSIST_READ_MESSAGE" />
<Trace level="1" type="T">Note: the following trace entry is written delayed (after read from persist)</Trace>
<Trace level="1" type="B" name="SXMS_ASYNC_EXEC" />
- <!-- ************************************
-->
<Trace level="1" type="T">----
</Trace>
<Trace level="1" type="T">Starting async processing with pipeline CENTRAL</Trace>
<Trace level="1" type="T">system-ID = XIL</Trace>
<Trace level="1" type="T">client = 002</Trace>
<Trace level="1" type="T">language = E</Trace>
<Trace level="1" type="T">user = PIAFUSER</Trace>
<Trace level="1" type="Timestamp">2006-09-14T09:48:04Z CET</Trace>
<Trace level="1" type="T">----
</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PIPELINE_SYNC" />
- <!-- ************************************
-->
<Trace level="1" type="T">Get definition of external pipeline CENTRAL</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-LOOKUP_INTERNAL_PL_ID" />
<Trace level="1" type="T">Corresponding internal pipeline SAP_CENTRAL</Trace>
<Trace level="1" type="T">Start with pipeline element PLEL= 5EC3C53B4BB7B62DE10000000A1148F5</Trace>
- <Trace level="1" type="B" name="PLSRV_MAPPING_REQUEST">
- <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV">
- <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV_LOCAL">
- <Trace level="1" type="B" name="CL_MAPPING_XMS_PLSRV3-ENTER_PLSRV">
<Trace level="1" type="T">Interface Mapping http://sap.com/xi/XI/Mail/30 GK_File2Mail_IM</Trace>
</Trace>
</Trace>
</Trace>
</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_LOG_TO_PERSIST" />
- <Trace level="1" type="B" name="PLSRV_OUTBOUND_BINDING">
- <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV">
- <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV_LOCAL">
<Trace level="1" type="B" name="CL_XMS_PLSRV_OUTBINDING-ENTER_PLSRV" />
</Trace>
</Trace>
</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_LOG_TO_PERSIST" />
- <Trace level="1" type="B" name="PLSRV_CALL_ADAPTER">
<Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV" />
- <!-- ************************************
-->
<Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV_LOCAL" />
- <!-- ************************************
-->
- <Trace level="1" type="B" name="CL_XMS_PLSRV_IE_ADAPTER-ENTER_PLSRV">
<Trace level="1" type="B" name="CL_XMS_PLSRV_CALL_XMB-CALL_XMS_HTTP" />
</Trace>
</Trace>
</Trace>
</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_LOG_TO_PERSIST" />
</Trace>
<Trace level="1" type="T">----
</Trace>
<Trace level="1" type="T">Async processing completed OK.</Trace>
<Trace level="1" type="T">system-ID = XIL</Trace>
<Trace level="1" type="T">client = 002</Trace>
<Trace level="1" type="T">language = E</Trace>
<Trace level="1" type="T">user = PIAFUSER</Trace>
<Trace level="1" type="Timestamp">2006-09-14T09:48:05Z CET</Trace>
<Trace level="1" type="T">----
</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_TO_PERSIST" />
- <!-- ************************************
-->
</SAP:Trace> -
Hi,
I am doing file to mail scenario. I got an error
"failed to send mail: java.io.IOException: invalid content type for SOAP:
TEXT/HTML"..
How to solve.
regards,
Ansar.Hi Bhavesh,
I done like that but still it is coming...
This is the process of Communication channel
2006-12-29 11:42:46 Success Mail: Receiver adapter entered with qos ExactlyOnce
2006-12-29 11:42:46 Success Mail: calling the adpter for processing
2006-12-29 11:42:46 Success Mail: call failed
2006-12-29 11:42:46 Success Mail: sending a delivery error ack ...
2006-12-29 11:42:46 Success Mail: sent a delivery error ack
2006-12-29 11:42:46 Error Mail: error occured: java.io.IOException: invalid content type for SOAP: TEXT/HTML
2006-12-29 11:42:46 Error Exception caught by adapter framework: Failed to call the endpoint
2006-12-29 11:42:46 Error Delivery of the message to the application using connection AFW failed, due to: Failed to call the endpoint.
2006-12-29 11:42:46 Success The message status set to WAIT.
2006-12-29 11:42:46 Success The asynchronous message was successfully scheduled to be delivered at Fri Dec 29 11:47:46 GMT+05:30 2006.
regards,
Ansar. -
Hi all,
We have a report prgm that will send a mail to SCOT to lotus notes.
In lotus notes, we have a group mail (Example: SAP_TEAM). How we can send mails to the lotus notes group...?
Thanks,
J Kumar.Hi Jitendra,
In SBWP you need to create a Distribution List to whom the mail has to be sent and in your program pass the Distribution list name with type 'B' in the receiver list of your mail sending program then all the members of that Distribution List will receive the mail.
Hope this is what you were expecting for.
Thanks,
Prashanth -
Automator w/ Group Mailer Truncating Messages
I am attempting to send out an email to every person in my Address Book who has an email. I created a smart group in Address Book and am using that to send my messages. I am going to be getting married and I would like to announce the dates when those are set. I am also having a child and would love to email everyone when it's time.
I can get the people I need to get. The problem is the mail message gets shorter and shorter every time a new message is created eg:
To:[email protected]
Body: "Hey guess what.... Blah Blah Blah"
To:[email protected]
Body: " guess what.... Blah Blah Blah"
To:[email protected]
Body:" lah Blah"
My workflow looks like this:
1. New Message
2. Find People whose group = has email
3. Group Mailer
4. Send MessageNot sure why you would need to use Automator. Why not just send a single email out using the group as the addressee and hide the addresses?
To send emails to a group and hide group member names and addresses when sending a message to a group created in Address Book do the following.
1. Open Mail and choose Preferences from the Mail menu.
2. Click Composing.
3. Deselect the checkbox for "When sending to a group, show all member addresses" and close Mail Preferences.
Then when you send an email to a group, only the group name will be seen. -
All names appear in the group mails. They didn't before.
I used to be able to send group mail with just the title of the group appearing in the "To" window. Now, all the names in the group have to be there or it won't go out. Sometimes I don't want the names there.
iMac G5 Mac OS X (10.4.8)Did not get it resolved.
Maybe you are looking for
-
Using Coursebuilder Action Manager to judge multiple interactions
I'm trying to use the Action Manager to display feedback when three separate text entry interactions on a page are completed. At the moment each interaction displays feedback and is disabled when completed. When all three have been completed I want
-
Hi everybody, I can't build my project because i have a problem with the mapping of field in a presentation, how i can map the field for a attribute on my BPM object? Thanks
-
I have done ample research trying to fix this issue. Including deleting the profile folder in the Mozilla support file, uninstalling and reinstalling, and restarting the computer. None of this advice has helped in any way and I still receive the same
-
Music Speeds up in iTunes 7.0.....
....whenever i use an app like Dream Seeker (BYOND) or Final Fantasy XI, etc. All my apps mess the music speed up, the only time its normal is when iTunes is one of the only things running. Just having Dream Seeker running sets the speed to 2x until
-
No certificates included in signature
Dear SAP, 1. DJ9 - My portal 2. DL9 - My ECC6 ABAP system. 3. DL9 is defined as back-end system of DJ9. When I am connected to my portal (DJ9), I want to start "Employee Self-Service" menu which is running on DL9. When I click on ""Employee Self-Serv