Group Policy Error on WS 2012 Standard R2
Hi,
Is there anybody experiencing below given error messages ? Its coming to some of the terminal users and is not consistent. At that point of time they cant open mapped drives from the RDWEB session.
There are no known DNS issues, UAC is disabled.
The user 'P:' preference item in the 'Drive Maps Policy {94C23C7F-2EF8-4CA1-B3DF-C0CAF937EDE2}' Group Policy Object did not apply because it failed with error code '0x800704b8 An extended error has occurred.' This error was suppressed.
Log Name: Application
Source: Group Policy Drive maps
Event ID: 4098
Level: Warning
--------ANOTHER ERROR MESSAGE ------------
The user 'X:' preference item in the 'Drive Maps Policy {94C23C7F-2EF8-4CA1-B3DF-C0CAF937EDE2}' Group Policy Object did not apply because it failed with error code '0x80070008 Not enough storage is available to process this command.' This error was suppressed.
Log Name: Application
Source: Group Policy Drive maps
Event ID: 4098
Level: Warning
I can't find any error message related to DNS in event viewer, all records look good to me.
Hi,
As I go through the .xml logs, nothing special was detected.
Would you please let me the file server's hardware configuration and how is the server's performance?
Besides that, could you please ask user to try on another pc and check if the problem still occurs.
Then we may able to narrow down the scope for troubleshooting.
Thanks and regards,
Elaine
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]
Similar Messages
-
Group Policy error 1112 - Drive Maps
Hi everyone
We are getting hundreds of these alerts from SCOM every day from multiple 2008 R2 terminal servers:
Alert from Operations Manager 2007:
Alert description: The Group Policy Client Side Extension Group Policy Drive Maps was unable to apply one or more settings because the changes must be processed before system startup or user logon. The system will wait for Group Policy processing to finish
completely before the next startup or logon for this user, and this may result in slow startup and boot performance.
Looking on the Server itself in the System log I see these entries for every time a user logs onto the server (via RemoteApp)
Log Name: System
Source: Microsoft-Windows-GroupPolicy
Date: 15/03/2012 2:23:58 p.m.
Event ID: 1112
Task Category: None
Level: Warning
Keywords:
User: HOT\xxxxxx
Computer: HOTAKLRD01.hot.co.nz
Description:
The Group Policy Client Side Extension Group Policy Drive Maps was unable to apply one or more settings because the changes must be processed before system startup or user logon. The system will wait for Group Policy processing to finish completely before the
next startup or logon for this user, and this may result in slow startup and boot performance.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Microsoft-Windows-GroupPolicy" Guid="{AEA1B4FA-97D1-45F2-A64C-4D69FFFD92C9}" />
<EventID>1112</EventID>
<Version>0</Version>
<Level>3</Level>
<Task>0</Task>
<Opcode>1</Opcode>
<Keywords>0x8000000000000000</Keywords>
<TimeCreated SystemTime="2012-03-15T01:23:58.350306600Z" />
<EventRecordID>57243</EventRecordID>
<Correlation ActivityID="{651EFA61-7FA8-4444-9E68-81D0F82DEFE4}" />
<Execution ProcessID="900" ThreadID="22780" />
<Channel>System</Channel>
<Computer>HOTAKLRD01.hot.co.nz</Computer>
<Security UserID="S-1-5-21-1288906317-135625827-1544898942-500" />
</System>
<EventData>
<Data Name="SupportInfo1">1</Data>
<Data Name="SupportInfo2">3961</Data>
<Data Name="ProcessingMode">1</Data>
<Data Name="ProcessingTimeInMilliseconds">4656</Data>
<Data Name="ErrorCode">1274</Data>
<Data Name="ErrorDescription">The group policy framework should call the extension in the synchronous foreground policy refresh. </Data>
<Data Name="DCName">\\HOTAKL31.hot.co.nz</Data>
<Data Name="ExtensionName">Group Policy Drive Maps</Data>
<Data Name="ExtensionId">{5794DAFD-BE60-433f-88A2-1A31939AC01F}</Data>
</EventData>
</Event>
However it each case the user still gets their drive mapping!
I've this only occurs with Drive Map GP Preference -I've even taken a user out of all policies except for a new test drive map policy and they still get this error. I've applied the hotfix that should be the latest version of the GP dll's (KB2622802) but
the error remains. I've tried all options within the GPP for Drive Maps - Update, Replace etc,
Should I just override the OpsMgr alerts? It seems like this is a bug with 2008 server and GP Drive Map Preferences?
Any ideas would be appreciated
Thanks
Rik> *"Note: For servers, the startup and logon processing always behaves
> as if this policy setting is enabled."*
>
> **
>
> **
>
> **
>
> **
>
> **
>
I must admit that I never used Drive Maps on a Server (-: Maybe this is
a bug in the Drive Maps CSE... If it bothers: Set NoBackgroundPolicy
(REG_DWORD) to 1 in HKLM\Software\Microsoft\Windows
NT\CurrentVersion\WinLogon\GPExtensions\
{5794DAFD-BE60-433f-88A2-1A31939AC01F}. This will prevent the Drive Maps
CSE from being invoked during background GP updates.
sincerely, martin
NO THEY ARE NOT EVIL, if you know what you are doing:
Good or bad GPOs?
Wenn meine Antwort hilfreich war, freue ich mich über eine Bewertung! If my answer was helpful, I'm glad about a rating! -
Printers working, but getting group policy error (error 513)
Ok great, I'll let you know how it goes.
Hi all,I've got a print server role running on a Server 2012 VM. It was working great until a few days ago until one of the printers went offline. I restarted the print spooler (no effect), then restarted the server (brought the printer back online). Since then, I've been receiving these errors for all three printers we have on this server:Error ID: 513Source: Microsoft-Windows-PrintServiceMessage: Group Policy was unable to add per computer connection \\___\\Copier Konica Minolta C360 PCL. Error code 0x7B. This can occur if the name of the printer connection is incorrect, or if the print spooler cannot contact the print server.The printer names did not change, and since the printers are working, it seems that the spooler is working. I also tried updating the drivers through print management (there is a new version of the driver...
This topic first appeared in the Spiceworks Community -
How do I setup Active Directory and Group Policy on Windows Server 2012?
I work for a school district that uses a Windows 2012 server with about 400 Windows 7 PCs and 150 Mac PCs. We are set up with Roaming Profiles on the PCs and would like to be able to setup Active Directory, Group Policy, and Roaming Profiles on our macs. (We also have a mac server that they are using as a file server only) As we are a school, our funds are very low. Now for the questions...
Is there a software that allow us to accomplish this?
Is there a free solution or a very reduced price option to do this?
I heard that http://www.centrify.com/products/mac-edition.asp may accomplish this and I read something about it on here but didn't know if this is what I was really trying to do becuase it was marked as "The Golden Triangle" and did not mention Raoming Profiles. This is the link though: https://discussions.apple.com/message/17200059#17200059
Any help would be greatly appreciated.The above reply does not take into account that I am trying to use GROUP POLICY EDITOR to make it the default browser.
-
Hi All,
While creating and modifying the Group Policy, we have received a error on one of the DC.
Background: We have created one Group policy for testing, some of settings were not visible, so couple of time we have edited the group policy to take the proper settings.
Please refer the attached error, and suggest us.
NOTE: the group policy was created and edited via AGPM
Thanks
Thanks HA> Please refer the attached error, and suggest us.
Check ACLs on the sysvol folder of your policy. Usually, this is an
orphaned ACL for authenticated users with only the "sync" right enabled.
GPMC fails to update this.
As a quick workaround: In the security filtering of your GPO, simply add
authenticated users, confirm and remove them again.
Martin
Mal ein
GUTES Buch über GPOs lesen?
NO THEY ARE NOT EVIL, if you know what you are doing:
Good or bad GPOs?
And if IT bothers me - coke bottle design refreshment :)) -
Server giving group policy error 4098
I have been developing group policies to replace our login script. The policy copies many files over from a shared network drive. On many of the policies I have set it to run in the local user's security context so that the GP will pick up the
drive letters (they are different depending on the office). On one server in a remote office where the Group Policy is not applied I keep getting errors every time I enable the policies in a separate test OU. It does not make any sense to me as
the policies should not apply to this server, the server is not a domain controller, and I did not login to this server under my user account.
Here is an example of the errors (there are hundreds of similar errors):
The user 'Worksharing Monitor for Autodesk Revit 2011.lnk' preference item in the 'New Cadd {184A655E-D801-4589-AAF4-37788F771193}' Group Policy object did not apply because it failed with error code '0x80070002 The system cannot find the file specified.'
This error was suppressed.
The user 'AutoCAD 2011 - English.lnk' preference item in the 'New Cadd {184A655E-D801-4589-AAF4-37788F771193}' Group Policy object did not apply because it failed with error code '0x80070002 The system cannot find the file specified.' This error was suppressed.
Any ideas?
Thanks!Hi,
You cannot the computer configuration policies to users. Please first of all , provide a new policy in the user configuration - shortcut" , and move the users that applying the shortcut policies to related OU. And gpupdate -- try again.
Thanks.
Alper YAZGAN * -
Lock Screen Group Policy - Error code 0X80070002
Hi
I'm trying to update the workstation policy (2008R2) to show a new Lock Screen for our users.
I have two policies:
-Windows 7 Workstation Policy
-Windows 8.1 Workstation Policy
It was no problem for our Windows 7 machines.
Windows 8.1 however wouldn't change.
The picture downloads successfully to the client directory I specified in the policy, resolution and size are ok.
I've tried deleting the sysdata folder on test machines (This left me with a blue lock screen, but still better than what they chose ;)
I've tried default and unique filenames, and different folder locations under 'Force A Specific Lock Screen'
I've disabled/enabled 'Force a Specific Lock Screen'
I came across this warning on the client test machine:
The computer 'backgroundDefault.jpg' preference item in the 'Win8.1 Policy}' Group Policy Object did not apply because it failed with error code '0x80070002 The system cannot find the file specified.' This error was suppressedHi ,
Can you please post the gpresult report here? And also ensure there is no policy processing failure in the problematic machines. That you can verify by seeing the gpsvc logs.
Regards, Prabhu -
Group policy error: Failed to open group policy object on this computer.
Hi all,
I received this message when i tried to look at the local group policy setting on one of my machines (Windows XP SP3), which is joined in my domain.
"Failed to open group policy object on this computer. You may not have appropriate rights.
Details:
Unspecified error."
note that I am local admin.
It's all started when I was troublshooting WSUS connectivity and i looked at the WinsdowsUpdate.log, the WSUS server was <Null> & WSUS status server <Null>, I tried to force the domain GP by using GPupdate /force, it went fine and asked to
log off, but nothing changed in the WindowsUpdate.log still <Null>. Then i tried to look at the local policy setting.
I searched the internet nothing related to my case.
Thanks in advance for advising.
Mohammed AdelI guess reinstall windows is the solution, I also found one log "event id 1096", related to "registry.pol" it was corrupted.
Regards,
Mohammed Adel -
REIMS application Group policy error
Hi all,
We r getting the error 'Group policy processing aborted' in REIMS application event log on EDI server.Plz help me out if any one has any light on this.
Thanks in advance.
Sap Basis.Hi,
As I go through the .xml logs, nothing special was detected.
Would you please let me the file server's hardware configuration and how is the server's performance?
Besides that, could you please ask user to try on another pc and check if the problem still occurs.
Then we may able to narrow down the scope for troubleshooting.
Thanks and regards,
Elaine
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected] -
Hello
I have an installation of Server 2012R2 as my DC. I am trying to setup GP for users to provide settings for IE10/11. I am not finding all of the options and I keep receiving an error about the admx file.
An error has occurred while collecting data for Administrative Templates.
The following errors were encountered:
Resource '$(string.VerMgmtAuditModeEnable)' referenced in attribute displayName could
not be found. File C:\Windows\PolicyDefinitions\inetres.admx, line 1495, column 249
I downloaded the file from MS and tried copying it to that directory in an elevated command prompt and it says I dont have permission to do that. I looked and it seems that everything is only read/execute with no modify ability. So I was going to try creating
a central store on SYSVOL per a suggestion on another forum, but I cant create a folder in SYSVOL\Policies because only the SYSTEM has modify rights.
I am logged in as a Domain Admin user. How am I supposed to fix my GP issues if I dont have the "right" to do it?
All suggestions will be appreciated.
Thank you in advanceHello
I have an installation of Server 2012R2 as my DC. I am trying to setup GP for users to provide settings for IE10/11. I am not finding all of the options and I keep receiving an error about the admx file.
An error has occurred while collecting data for Administrative Templates.
The following errors were encountered:
Resource '$(string.VerMgmtAuditModeEnable)' referenced in attribute displayName could
not be found. File C:\Windows\PolicyDefinitions\inetres.admx, line 1495, column 249
I downloaded the file from MS and tried copying it to that directory in an elevated command prompt and it says I dont have permission to do that. I looked and it seems that everything is only read/execute with no modify ability. So I was going to try creating
a central store on SYSVOL per a suggestion on another forum, but I cant create a folder in SYSVOL\Policies because only the SYSTEM has modify rights.
I am logged in as a Domain Admin user. How am I supposed to fix my GP issues if I dont have the "right" to do it?
All suggestions will be appreciated.
Thank you in advance
please refer to:
https://social.technet.microsoft.com/Forums/en-US/bac54114-54d7-472b-969d-9b08f28dbba9/error-when-selecting-administrative-template-in-any-gpo?forum=winserverGP
Don
(Please take a moment to "Vote as Helpful" and/or "Mark as Answer", where applicable.
This helps the community, keeps the forums tidy, and recognises useful contributions. Thanks!) -
Group policy - 'install pending - reboot required'
I have deployed software using GPO - Computer Configuration - Assigned software. This has worked with flying colors for most computers on our domain - all running Windows 7 x86. Only a select few computers have failed to get this software installed.
When I checked RSOP.msc, I get a message that the install is pending and awaiting reboot. These machines have rebooted many times and yet the same message appears on RSOP and the software has yet to actually install.
Where is it getting hung up? Is there some sort of install cache that I can clear on the PC so GPO will try to send the install from scratch?
We have tried several things to try to isolate variables:
Tried gpupdate /force - I am prompted to reboot, and when I do so the software does not install
Checked GP Result - shows that this software install policy was "applied" to the computer, yet it isn't installed
Checked RSOP.msc, I get a message that the install is pending and awaiting reboot - reboots do not resolve this
Added permissions for "everyone" at the distribution point NTFS and share (I doubt it's permissions anyway since installs were successful on most computers before we added more permissions)
Tried adding a Computer Configuration/Administrative Templates/System/Group Policy/Startup policy processing wait time - 20 seconds (I tried this after reading this forum question -
http://social.technet.microsoft.com/Forums/en-US/winserverGP/thread/2a2175bf-132f-46c2-bc5a-4c67932141e2/)
Furthermore, every test I try to manufacture grabs the GPO and installs the software with success. The only machines that fail are machines that aren't easy for me to access as people are using them during the workday.
I have grabbed the event viewer information for a failing PC "WOLF", these events show every time after logon as well:
Warning 1/11/2012 2:40:25 PM Application Management Group Policy 101 None
Log Name: System
Source: Application Management Group Policy
Date: 1/11/2012 2:40:25 PM
Event ID: 101
Task Category: None
Level: Warning
Keywords: Classic
User: SYSTEM
Computer: WOLF.domain.local
Description:
The assignment of application TeamViewer 6 (MSI Wrapper) from policy TeamViewer 6 MSI PDX failed. The error was : %%1274
Error 1/11/2012 2:40:25 PM Application Management Group Policy 103 None
Log Name: System
Source: Application Management Group Policy
Date: 1/11/2012 2:40:25 PM
Event ID: 103
Task Category: None
Level: Error
Keywords: Classic
User: SYSTEM
Computer: WOLF.domain.local
Description:
The removal of the assignment of application TeamViewer 6 (MSI Wrapper) from policy TeamViewer 6 MSI PDX failed. The error was : %%2
Warning 1/11/2012 2:40:25 PM Application Management Group Policy 108 None
Log Name: System
Source: Application Management Group Policy
Date: 1/11/2012 2:40:25 PM
Event ID: 108
Task Category: None
Level: Warning
Keywords: Classic
User: SYSTEM
Computer: WOLF.domain.local
Description:
Failed to apply changes to software installation settings. The installation of software deployed through Group Policy for this user has been delayed until the next logon because the changes must be applied before the user logon. The error was :
%%1274
Warning 1/11/2012 2:40:25 PM GroupPolicy 1112 None
Log Name: System
Source: Microsoft-Windows-GroupPolicy
Date: 1/11/2012 2:40:25 PM
Event ID: 1112
Task Category: None
Level: Warning
Keywords:
User: SYSTEM
Computer: WOLF.domain.local
Description:
The Group Policy Client Side Extension Software Installation was unable to apply one or more settings because the changes must be processed before system startup or user logon. The system will wait for Group Policy processing to finish completely before the
next startup or logon for this user, and this may result in slow startup and boot performance.
Any help would be appreciated!
Thanks,
Elizabeth> TeamViewer 6 MSI PDX failed. The error was : %%1274
Not really an error - more an information. Results from a "gpupdate" and
means "reboot now, please".
> from policy TeamViewer 6 MSI PDX failed. The error was : %%2
File not found. That's odd... May need further investigation.
> before the user logon. The error was : %%1274
See above - reboot required.
You may activate appmgmt debug logging and then post the resulting log
file: In HKLM\Software\Microsoft\Windows NT\CurrentVersion\Diagnostics,
set AppmgmtDebugLevel (REG_DWORD) to 0x9b and examine
%windir%\debug\usermode\appmgmt.log after the next reboot.
If no other solution, you may try to cleanup the appmgmt history key so
that all SW deployment GPOs will be processed again: Rename
HKLM\Software\Microsoft\Windows\CurrentVersion\Group Policy\AppMgmt and
recreate empty.
sincerely, Martin
A bissle "Experience", a bissle GMV... Wenn meine Antwort hilfreich war, freue ich mich über eine Bewertung! If my answer was helpful, I'm glad about a rating! -
Group Policy processing failure on 2008 when MIX Domain 2003 with DC 2008
Dear I try to add additional Windows 2008 Domain to My Domain controller 2003 and I ma Receiving Group policy error in DC 2008 With Event ID 1055
The processing of Group Policy failed. Windows could not resolve the computer name. This could be caused by one of more of the following:
a) Name Resolution failure on the current domain controller.
b) Active Directory Replication Latency (an account created on another domain controller has not replicated to the current domain controller).
- <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
- <System>
<Provider Name="Microsoft-Windows-GroupPolicy" Guid="{AEA1B4FA-97D1-45F2-A64C-4D69FFFD92C9}" />
<EventID>1055</EventID>
<Version>0</Version>
<Level>2</Level>
<Task>0</Task>
<Opcode>1</Opcode>
<Keywords>0x8000000000000000</Keywords>
<TimeCreated SystemTime="2014-03-06T14:36:44.411955300Z" />
<EventRecordID>3859</EventRecordID>
<Correlation ActivityID="{28DAD258-26D0-4C1E-A4B7-F37DEE04C8F1}" />
<Execution ProcessID="952" ThreadID="3276" />
<Channel>System</Channel>
<Computer>PRIMARYDC.Qtit.com</Computer>
<Security UserID="S-1-5-18" />
</System>
- <EventData>
<Data Name="SupportInfo1">1</Data>
<Data Name="SupportInfo2">1632</Data>
<Data Name="ProcessingMode">0</Data>
<Data Name="ProcessingTimeInMilliseconds">1578</Data>
<Data Name="ErrorCode">5</Data>
<Data Name="ErrorDescription">Access is denied.</Data>
</EventData>
</Event>
I install See KB939820 for a hotfix applicable to Microsoft DC 2003 regrading to he KRBTGT account
Refer Url : http://support.microsoft.com/kb/939820
I run dcdiag /v on and repadmin /showrepl at DC 2008
the dcdiag /v result
Directory Server Diagnosis
Performing initial setup:
Trying to find home server...
* Verifying that the local machine PRIMARYDC, is a Directory Server.
Home Server = PRIMARYDC
* Connecting to directory service on server PRIMARYDC.
* Identified AD Forest.
Collecting AD specific global data
* Collecting site info.
Calling ldap_search_init_page(hld,CN=Sites,CN=Configuration,DC=Qtit,DC=com,LDAP_SCOPE_SUBTREE,(objectCategory=ntDSSiteSettings),.......
The previous call succeeded
Iterating through the sites
Looking at base site object: CN=NTDS Site Settings,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=Qtit,DC=com
Getting ISTG and options for the site
* Identifying all servers.
Calling ldap_search_init_page(hld,CN=Sites,CN=Configuration,DC=Qtit,DC=com,LDAP_SCOPE_SUBTREE,(objectClass=ntDSDsa),.......
The previous call succeeded....
The previous call succeeded
Iterating through the list of servers
Getting information for the server CN=NTDS Settings,CN=SECONDAD,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=Qtit,DC=com
objectGuid obtained
InvocationID obtained
dnsHostname obtained
site info obtained
All the info for the server collected
Getting information for the server CN=NTDS Settings,CN=PRIMARYDC,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=Qtit,DC=com
objectGuid obtained
InvocationID obtained
dnsHostname obtained
site info obtained
All the info for the server collected
* Identifying all NC cross-refs.
* Found 2 DC(s). Testing 1 of them.
Done gathering initial info.
Doing initial required tests
Testing server: Default-First-Site-Name\PRIMARYDC
Starting test: Connectivity
* Active Directory LDAP Services Check
Determining IP4 connectivity
* Active Directory RPC Services Check
......................... PRIMARYDC passed test Connectivity
Doing primary tests
Testing server: Default-First-Site-Name\PRIMARYDC
Starting test: Advertising
The DC PRIMARYDC is advertising itself as a DC and having a DS.
The DC PRIMARYDC is advertising as an LDAP server
The DC PRIMARYDC is advertising as having a writeable directory
The DC PRIMARYDC is advertising as a Key Distribution Center
The DC PRIMARYDC is advertising as a time server
The DS PRIMARYDC is advertising as a GC.
......................... PRIMARYDC passed test Advertising
Test omitted by user request: CheckSecurityError
Test omitted by user request: CutoffServers
Starting test: FrsEvent
* The File Replication Service Event log test
There are warning or error events within the last 24 hours after the
SYSVOL has been shared. Failing SYSVOL replication problems may cause
Group Policy problems.
A warning event occurred. EventID: 0x800034C8
Time Generated: 03/06/2014 10:18:56
Event String:
The File Replication Service has detected an enabled disk write cache on the drive containing the directory c:\windows\ntfrs\jet on the computer PRIMARYDC. The File Replication Service might not recover when power to
the drive is interrupted and critical updates are lost.
A warning event occurred. EventID: 0x800034C8
Time Generated: 03/06/2014 10:53:21
Event String:
The File Replication Service has detected an enabled disk write cache on the drive containing the directory c:\windows\ntfrs\jet on the computer PRIMARYDC. The File Replication Service might not recover when power to
the drive is interrupted and critical updates are lost.
......................... PRIMARYDC passed test FrsEvent
Starting test: DFSREvent
The DFS Replication Event Log.
Skip the test because the server is running FRS.
......................... PRIMARYDC passed test DFSREvent
Starting test: SysVolCheck
* The File Replication Service SYSVOL ready test
File Replication Service's SYSVOL is ready
......................... PRIMARYDC passed test SysVolCheck
Starting test: KccEvent
* The KCC Event log test
Found no KCC errors in "Directory Service" Event log in the last 15 minutes.
......................... PRIMARYDC passed test KccEvent
Starting test: KnowsOfRoleHolders
Role Schema Owner = CN=NTDS Settings,CN=SECONDAD,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=Qtit,DC=com
Role Domain Owner = CN=NTDS Settings,CN=SECONDAD,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=Qtit,DC=com
Role PDC Owner = CN=NTDS Settings,CN=SECONDAD,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=Qtit,DC=com
Role Rid Owner = CN=NTDS Settings,CN=SECONDAD,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=Qtit,DC=com
Role Infrastructure Update Owner = CN=NTDS Settings,CN=SECONDAD,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=Qtit,DC=com
......................... PRIMARYDC passed test KnowsOfRoleHolders
Starting test: MachineAccount
Checking machine account for DC PRIMARYDC on DC PRIMARYDC.
* SPN found :LDAP/PRIMARYDC.Qtit.com/Qtit.com
* SPN found :LDAP/PRIMARYDC.Qtit.com
* SPN found :LDAP/PRIMARYDC
* SPN found :LDAP/PRIMARYDC.Qtit.com/QTIT
* SPN found :LDAP/e3d8c76c-1b59-4de6-9f7f-c438df9a2863._msdcs.Qtit.com
* SPN found :E3514235-4B06-11D1-AB04-00C04FC2DCD2/e3d8c76c-1b59-4de6-9f7f-c438df9a2863/Qtit.com
* SPN found :HOST/PRIMARYDC.Qtit.com/Qtit.com
* SPN found :HOST/PRIMARYDC.Qtit.com
* SPN found :HOST/PRIMARYDC
* SPN found :HOST/PRIMARYDC.Qtit.com/QTIT
* SPN found :GC/PRIMARYDC.Qtit.com/Qtit.com
......................... PRIMARYDC passed test MachineAccount
Starting test: NCSecDesc
* Security Permissions check for all NC's on DC PRIMARYDC.
The forest is not ready for RODC. Will skip checking ERODC ACEs.
* Security Permissions Check for
DC=ForestDnsZones,DC=Qtit,DC=com
(NDNC,Version 3)
Error NT AUTHORITY\ENTERPRISE DOMAIN CONTROLLERS doesn't have
Replicating Directory Changes In Filtered Set
access rights for the naming context:
DC=ForestDnsZones,DC=Qtit,DC=com
* Security Permissions Check for
DC=DomainDnsZones,DC=Qtit,DC=com
(NDNC,Version 3)
Error NT AUTHORITY\ENTERPRISE DOMAIN CONTROLLERS doesn't have
Replicating Directory Changes In Filtered Set
access rights for the naming context:
DC=DomainDnsZones,DC=Qtit,DC=com
* Security Permissions Check for
CN=Schema,CN=Configuration,DC=Qtit,DC=com
(Schema,Version 3)
* Security Permissions Check for
CN=Configuration,DC=Qtit,DC=com
(Configuration,Version 3)
* Security Permissions Check for
DC=Qtit,DC=com
(Domain,Version 3)
......................... PRIMARYDC failed test NCSecDesc
Starting test: NetLogons
* Network Logons Privileges Check
Verified share \\PRIMARYDC\netlogon
Verified share \\PRIMARYDC\sysvol
......................... PRIMARYDC passed test NetLogons
Starting test: ObjectsReplicated
PRIMARYDC is in domain DC=Qtit,DC=com
Checking for CN=PRIMARYDC,OU=Domain Controllers,DC=Qtit,DC=com in domain DC=Qtit,DC=com on 1 servers
Object is up-to-date on all servers.
Checking for CN=NTDS Settings,CN=PRIMARYDC,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=Qtit,DC=com in domain CN=Configuration,DC=Qtit,DC=com on 1 servers
Object is up-to-date on all servers.
......................... PRIMARYDC passed test ObjectsReplicated
Test omitted by user request: OutboundSecureChannels
Starting test: Replications
* Replications Check
* Replication Latency Check
DC=ForestDnsZones,DC=Qtit,DC=com
Latency information for 18 entries in the vector were ignored.
18 were retired Invocations. 0 were either: read-only replicas and are not verifiably latent, or dc's no longer replicating this nc. 0 had no latency information (Win2K DC).
DC=DomainDnsZones,DC=Qtit,DC=com
Latency information for 18 entries in the vector were ignored.
18 were retired Invocations. 0 were either: read-only replicas and are not verifiably latent, or dc's no longer replicating this nc. 0 had no latency information (Win2K DC).
CN=Schema,CN=Configuration,DC=Qtit,DC=com
Latency information for 20 entries in the vector were ignored.
20 were retired Invocations. 0 were either: read-only replicas and are not verifiably latent, or dc's no longer replicating this nc. 0 had no latency information (Win2K DC).
CN=Configuration,DC=Qtit,DC=com
Latency information for 20 entries in the vector were ignored.
20 were retired Invocations. 0 were either: read-only replicas and are not verifiably latent, or dc's no longer replicating this nc. 0 had no latency information (Win2K DC).
DC=Qtit,DC=com
Latency information for 20 entries in the vector were ignored.
20 were retired Invocations. 0 were either: read-only replicas and are not verifiably latent, or dc's no longer replicating this nc. 0 had no latency information (Win2K DC).
* Replication Site Latency Check
......................... PRIMARYDC passed test Replications
Starting test: RidManager
* Available RID Pool for the Domain is 14607 to 1073741823
* SecondAD.Qtit.com is the RID Master
* DsBind with RID Master was successful
* rIDAllocationPool is 14107 to 14606
* rIDPreviousAllocationPool is 14107 to 14606
* rIDNextRID: 14124
......................... PRIMARYDC passed test RidManager
Starting test: Services
* Checking Service: EventSystem
* Checking Service: RpcSs
* Checking Service: NTDS
* Checking Service: DnsCache
* Checking Service: NtFrs
* Checking Service: IsmServ
* Checking Service: kdc
* Checking Service: SamSs
* Checking Service: LanmanServer
* Checking Service: LanmanWorkstation
* Checking Service: w32time
* Checking Service: NETLOGON
......................... PRIMARYDC passed test Services
Starting test: SystemLog
* The System Event log test
A warning event occurred. EventID: 0x0000A001
Time Generated: 03/06/2014 16:04:05
Event String:
The Security System could not establish a secured connection with the server ldap/PRIMARYDC.Qtit.com/[email protected]. No authentication protocol was available.
An error event occurred. EventID: 0x0000041F
Time Generated: 03/06/2014 16:06:35
Event String:
The processing of Group Policy failed. Windows could not resolve the computer name. This could be caused by one of more of the following:
a) Name Resolution failure on the current domain controller.
b) Active Directory Replication Latency (an account created on another domain controller has not replicated to the current domain controller).
An error event occurred. EventID: 0x0000041F
Time Generated: 03/06/2014 16:11:36
Event String:
The processing of Group Policy failed. Windows could not resolve the computer name. This could be caused by one of more of the following:
a) Name Resolution failure on the current domain controller.
b) Active Directory Replication Latency (an account created on another domain controller has not replicated to the current domain controller).
An error event occurred. EventID: 0x0000041F
Time Generated: 03/06/2014 16:16:38
Event String:
The processing of Group Policy failed. Windows could not resolve the computer name. This could be caused by one of more of the following:
a) Name Resolution failure on the current domain controller.
b) Active Directory Replication Latency (an account created on another domain controller has not replicated to the current domain controller).
An error event occurred. EventID: 0x0000041F
Time Generated: 03/06/2014 16:21:39
Event String:
The processing of Group Policy failed. Windows could not resolve the computer name. This could be caused by one of more of the following:
a) Name Resolution failure on the current domain controller.
b) Active Directory Replication Latency (an account created on another domain controller has not replicated to the current domain controller).
An error event occurred. EventID: 0x0000041F
Time Generated: 03/06/2014 16:26:41
Event String:
The processing of Group Policy failed. Windows could not resolve the computer name. This could be caused by one of more of the following:
a) Name Resolution failure on the current domain controller.
b) Active Directory Replication Latency (an account created on another domain controller has not replicated to the current domain controller).
An error event occurred. EventID: 0x00000457
Time Generated: 03/06/2014 16:30:46
Event String:
Driver TOSHIBA e-STUDIO16/20/25 PCL 6 required for printer TOSHIBA e-STUDIO16/20/25 PCL 6 is unknown. Contact the administrator to install the driver before you log in again.
An error event occurred. EventID: 0x00000457
Time Generated: 03/06/2014 16:30:48
Event String:
Driver Microsoft XPS Document Writer v4 required for printer Microsoft XPS Document Writer is unknown. Contact the administrator to install the driver before you log in again.
An error event occurred. EventID: 0x00000457
Time Generated: 03/06/2014 16:30:49
Event String:
Driver Send to Microsoft OneNote 15 Driver required for printer Send To OneNote 2013 is unknown. Contact the administrator to install the driver before you log in again.
An error event occurred. EventID: 0x00000457
Time Generated: 03/06/2014 16:31:14
Event String:
Driver Send to Microsoft OneNote 15 Driver required for printer Send To OneNote 2013 is unknown. Contact the administrator to install the driver before you log in again.
An error event occurred. EventID: 0x00000457
Time Generated: 03/06/2014 16:31:16
Event String:
Driver Microsoft XPS Document Writer v4 required for printer Microsoft XPS Document Writer is unknown. Contact the administrator to install the driver before you log in again.
An error event occurred. EventID: 0x00000457
Time Generated: 03/06/2014 16:31:16
Event String:
Driver WebEx Document Loader required for printer WebEx Document Loader is unknown. Contact the administrator to install the driver before you log in again.
An error event occurred. EventID: 0x0000041F
Time Generated: 03/06/2014 16:31:42
Event String:
The processing of Group Policy failed. Windows could not resolve the computer name. This could be caused by one of more of the following:
a) Name Resolution failure on the current domain controller.
b) Active Directory Replication Latency (an account created on another domain controller has not replicated to the current domain controller).
......................... PRIMARYDC failed test SystemLog
Test omitted by user request: Topology
Test omitted by user request: VerifyEnterpriseReferences
Starting test: VerifyReferences
The system object reference (serverReference)
CN=PRIMARYDC,OU=Domain Controllers,DC=Qtit,DC=com and backlink on
CN=PRIMARYDC,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=Qtit,DC=com
are correct.
The system object reference (serverReferenceBL)
CN=PRIMARYDC,CN=Domain System Volume (SYSVOL share),CN=File Replication Service,CN=System,DC=Qtit,DC=com
and backlink on
CN=NTDS Settings,CN=PRIMARYDC,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=Qtit,DC=com
are correct.
The system object reference (frsComputerReferenceBL)
CN=PRIMARYDC,CN=Domain System Volume (SYSVOL share),CN=File Replication Service,CN=System,DC=Qtit,DC=com
and backlink on CN=PRIMARYDC,OU=Domain Controllers,DC=Qtit,DC=com are
correct.
......................... PRIMARYDC passed test VerifyReferences
Test omitted by user request: VerifyReplicas
Test omitted by user request: DNS
Test omitted by user request: DNS
Running partition tests on : ForestDnsZones
Starting test: CheckSDRefDom
......................... ForestDnsZones passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... ForestDnsZones passed test
CrossRefValidation
Running partition tests on : DomainDnsZones
Starting test: CheckSDRefDom
......................... DomainDnsZones passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... DomainDnsZones passed test
CrossRefValidation
Running partition tests on : Schema
Starting test: CheckSDRefDom
......................... Schema passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... Schema passed test CrossRefValidation
Running partition tests on : Configuration
Starting test: CheckSDRefDom
......................... Configuration passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... Configuration passed test CrossRefValidation
Running partition tests on : Qtit
Starting test: CheckSDRefDom
......................... Qtit passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... Qtit passed test CrossRefValidation
Running enterprise tests on : Qtit.com
Test omitted by user request: DNS
Test omitted by user request: DNS
Starting test: LocatorCheck
GC Name: \\PRIMARYDC.Qtit.com
Locator Flags: 0xe00031fc
PDC Name: \\SecondAD.Qtit.com
Locator Flags: 0xe00001bd
Time Server Name: \\PRIMARYDC.Qtit.com
Locator Flags: 0xe00031fc
Preferred Time Server Name: \\PRIMARYDC.Qtit.com
Locator Flags: 0xe00031fc
KDC Name: \\PRIMARYDC.Qtit.com
Locator Flags: 0xe00031fc
......................... Qtit.com passed test LocatorCheck
Starting test: Intersite
Skipping site Default-First-Site-Name, this site is outside the scope
provided by the command line arguments provided.
......................... Qtit.com passed test Intersite
repadmin /showrepl Result
******************************8
==== INBOUND NEIGHBORS ===================================
DC=Qtit,DC=com
Default-First-Site-Name\SECONDAD via RPC
DSA object GUID: c5ef6e17-77f0-43f6-8d39-5497c563f
Last attempt @ 2014-03-06 16:41:04 was successful.
CN=Configuration,DC=Qtit,DC=com
Default-First-Site-Name\SECONDAD via RPC
DSA object GUID: c5ef6e17-77f0-43f6-8d39-5497c563f
Last attempt @ 2014-03-06 16:41:39 was successful.
CN=Schema,CN=Configuration,DC=Qtit,DC=com
Default-First-Site-Name\SECONDAD via RPC
DSA object GUID: c5ef6e17-77f0-43f6-8d39-5497c563f
Last attempt @ 2014-03-06 15:53:01 was successful.
DC=DomainDnsZones,DC=Qtit,DC=com
Default-First-Site-Name\SECONDAD via RPC
DSA object GUID: c5ef6e17-77f0-43f6-8d39-5497c563f
Last attempt @ 2014-03-06 16:27:31 was successful.
DC=ForestDnsZones,DC=Qtit,DC=com
Default-First-Site-Name\SECONDAD via RPC
DSA object GUID: c5ef6e17-77f0-43f6-8d39-5497c563f
Last attempt @ 2014-03-06 15:53:01 was successful.
I try to down the DC 2003 and access \\Qtit.com it success open the syslog on DC 2008
Any help or adviceHi,
Were there other error codes logged in Event Viewer?
Regarding Event ID 1055, the following article can be referred to for troubleshooting.
Event ID 1055 — Group Policy Preprocessing (Security)
http://technet.microsoft.com/en-us/library/cc727272(v=ws.10).aspx
Based on the report you posted, this issue may be related to FRS replication service. As a result, we can use ntfrsutl tool to check whether the replication service is healthy.
Regarding this point, the following articles can be referred to for more information.
Troubleshooting File Replication Service
http://technet.microsoft.com/en-us/library/bb727056.aspx
Ntfrsutl
http://technet.microsoft.com/en-us/library/hh875636.aspx
In addition, we can also try doing a non-authoritative Sysvol restore on Windows Server 2008 DC to see whether the issue persists.
Using the BurFlags registry key to reinitialize File Replication Service replica sets
http://support.microsoft.com/kb/290762/en-us
Hope it helps.
Best regards,
Frank Shen -
The Group Policy client-side extension Scripts failed ...
This is an error I've been seeing forever and it was always the impression that upgrading would resolve it, but it never has even in 10.3. 100% of our users get these errors in the Event Viewer:
Event Type: Error
Event Source: Userenv
Event Category: None
Event ID: 1085
Date: 10/21/2010
Time: 8:04:52 AM
User: NT AUTHORITY\SYSTEM
Computer: XXXXXX
Description:
The Group Policy client-side extension Scripts failed to execute. Please look for any errors reported earlier by that extension.
For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.
We also seem to have flakey policy issues where once in awhile a user will not be able to logon to Windows with Workstation Only while getting the " not allowed to logon interactively" message, other times the users report not being able to access the Windows Date and Time Properties and further sometimes they are unable to make system changes.
We have troubleshooted this and the only resolutions we've found are to run zac cc, zac ref, zac pl and sometimes it seems like deleting c:\windows\system32\grouppolicy will help.
In regards to the Event Viewer entry I posted, on any given machine I can issue the command gpupdate and it will put another entry into the Event Viewer (sometimes multiple ones). I've learned through research that if I "clean up" c:\windows\system32\grouppolicy\gpt.ini the errors go away, but once the policy is refreshed they come right back.
This is the version ZenWorks gives the users:
[General]
gPCFunctionalityVersion=2
gPCFunctionalityVersion=2
gPCMachineExtensionNames=[{35378EAC-683F-11D2-A89A-00C04FBBCFA2}{0F6B957D-509E-11D1-A7CC-0000F87571E3}][{3610EDA5-77EF-11D2-8DC5-00C04FA31A66}{0F6B957D-509E-11D1-A7CC-0000F87571E3}][{42B5FAAE-6536-11D2-AE5A-0000F87571E3}{40B6664F-4972-11D1-A7CA-0000F87571E3}][{4CFB60C1-FAA6-47F1-89AA-0B18730C9FD3}{0F6B957D-509E-11D1-A7CC-0000F87571E3}][{827D319E-6EAC-11D2-A4EA-00C04F79F83A}{803E14A0-B4FB-11D0-A0D0-00A0C90F574B}]
Version=6488106
gPCUserExtensionNames=[{35378EAC-683F-11D2-A89A-00C04FBBCFA2}{0F6B957E-509E-11D1-A7CC-0000F87571E3}][{42B5FAAE-6536-11D2-AE5A-0000F87571E3}{40B66650-4972-11D1-A7CA-0000F87571E3}][{4CFB60C1-FAA6-47F1-89AA-0B18730C9FD3}{0F6B957E-509E-11D1-A7CC-0000F87571E3}][{A2E30F80-D7DE-11D2-BBDE-00C04F86AE3B}{FC715823-C5FB-11D1-9EEF-00A0C90347FF}]
This is the version I cleaned up:
[General]
gPCFunctionalityVersion=2
gPCUserExtensionNames=[{35378EAC-683F-11D2-A89A-00C04FBBCFA2}{0F6B957E-509E-11D1-A7CC-0000F87571E3}][{4CFB60C1-FAA6-47F1-89AA-0B18730C9FD3}{0F6B957E-509E-11D1-A7CC-0000F87571E3}][{A2E30F80-D7DE-11D2-BBDE-00C04F86AE3B}{FC715823-C5FB-11D1-9EEF-00A0C90347FF}]
gPCUserExtensionNames=[{35378EAC-683F-11D2-A89A-00C04FBBCFA2}{0F6B957E-509E-11D1-A7CC-0000F87571E3}][{A2E30F80-D7DE-11D2-BBDE-00C04F86AE3B}{FC715823-C5FB-11D1-9EEF-00A0C90347FF}]
I'm not sure how to get Zenworks to use the cleaned up version nor and I too sure what those extra extensions are and how they got in there. I may need to contact Novell in regards to this, but since I'm already working on an SR with them I figured I'd go ahead and post here first.
Any help or advice would be greatly appreciated.Here are the groups I'm using. NOTE: These have been in affect throughout the issues experienced. Users will work perfectly fine then suddenly the problem will start happening without any policy change on our side.
-Member of-
Network Configuration Operators+
Remote Desktop Users+
Users+
-Assigned Rights under a group I called "Other Rights"-
Access this computer from network
Change the system time
Log on locally
Shut down the system
The only condition I have is that these issues happen when logging in Workstation Only and I'm not able to recreate the problem on demand with tests.
Originally Posted by craig_wilson
The "Interactive Logon" is a Windows Security Permission.
It is generally assigned to certain local groups such as "User".
Which groups are assigned this right can be changed manually and
controlled by local security policies.
When user's get this error, it generally means their account is not in a
local group that has been assigned that right.
If using "DLU", make sure the user accounts are a member of "Users".
And If anyone was messing with security policies, make sure they did not
take away "Interactive Logons" from anyone.
On 10/29/2010 7:06 AM, jcsmith1 wrote:
>
> Thanks for replying craig.
>
> My policy woes have only grown since my first post. We are currently
> testing the removal of administrative rights and now we're having
> teleworkers (who login Workstation Only) getting the message "policy
> does not allow interactive login". What -seems- to fix it is a zac cc,
> zac ref and zac pl, however we just started getting call backs from
> users.
>
> I seem to have no further leads and Novell's ZenWorks tech supports
> seems to be going through some kind of painful-to-the-customer
> transition as one of my thoughts on resolving the issue is to go to 10.3
> or 10.3.1, but my Satellites appear to be upgrading but in reality do
> not upgrade (but the primary servers upgraded) (See SR 10655976331).
>
> Does anyone knows how to troubleshoot policy issues when the users
> aren't loggin into ZCM?
>
> craig_wilson;2036646 Wrote:
>> See: 'Group Policy Error: The Group Policy client-side extension Script
>> failed to execute.'
>> (Group Policy Error: The Group Policy client-side extension Script failed to execute.)
>>
>> This would never be fixed in any patch, since it would be the job of
>> GPEDIT to properly maintain the GPT.INI.
>>
>> Most of the Time these errors are cosmetic and caused by stray script
>> extensions.
>>
>> You may want to create an Enhancement Request to allow the creation of
>> "Filters" so certain errors are discarded and not sent to the DB/ZCC.
>> This way an Admin could choose to filter out various error messages
>> that
>> they deem are not actually of concern.
>>
>> On 10/21/2010 9:36 AM, jcsmith1 wrote:
>>>
>>> This is an error I've been seeing forever and it was always the
>>> impression that upgrading would resolve it, but it never has even in
>>> 10.3. 100% of our users get these errors in the Event Viewer:
>>>
>>> -Event Type: Error
>>> Event Source: Userenv
>>> Event Category: None
>>> Event ID: 1085
>>> Date: 10/21/2010
>>> Time: 8:04:52 AM
>>> User: NT AUTHORITY\SYSTEM
>>> Computer: XXXXXX
>>> Description:
>>> The Group Policy client-side extension Scripts failed to execute.
>>> Please look for any errors reported earlier by that extension.
>>>
>>> For more information, see Help and Support Center at
>>> http://go.microsoft.com/fwlink/events.asp.
>>> -
>>> We also seem to have flakey policy issues where once in awhile a
>> user
>>> will not be able to logon to Windows with Workstation Only while
>> getting
>>> the " not allowed to logon interactively" message, other times the
>> users
>>> report not being able to access the Windows Date and Time Properties
>> and
>>> further sometimes they are unable to make system changes.
>>>
>>> We have troubleshooted this and the only resolutions we've found are
>> to
>>> run zac cc, zac ref, zac pl and sometimes it seems like deleting
>>> c:\windows\system32\grouppolicy will help.
>>>
>>> In regards to the Event Viewer entry I posted, on any given machine
>> I
>>> can issue the command gpupdate and it will put another entry into
>> the
>>> Event Viewer (sometimes multiple ones). I've learned through
>> research
>>> that if I "clean up" c:\windows\system32\grouppolicy\gpt.ini the
>> errors
>>> go away, but once the policy is refreshed they come right back.
>>>
>>> This is the version ZenWorks gives the users:
>>>> [General]
>>>> gPCFunctionalityVersion=2
>>>> gPCFunctionalityVersion=2
>>>>
>> gPCMachineExtensionNames=[{35378EAC-683F-11D2-A89A-00C04FBBCFA2}{0F6B957D-509E-11D1-A7CC-0000F87571E3}][{3610EDA5-77EF-11D2-8DC5-00C04FA31A66}{0F6B957D-509E-11D1-A7CC-0000F87571E3}][{42B5FAAE-6536-11D2-AE5A-0000F87571E3}{40B6664F-4972-11D1-A7CA-0000F87571E3}][{4CFB60C1-FAA6-47F1-89AA-0B18730C9FD3}{0F6B957D-509E-11D1-A7CC-0000F87571E3}][{827D319E-6EAC-11D2-A4EA-00C04F79F83A}{803E14A0-B4FB-11D0-A0D0-00A0C90F574B}]
>>>> Version=6488106
>>>>
>> gPCUserExtensionNames=[{35378EAC-683F-11D2-A89A-00C04FBBCFA2}{0F6B957E-509E-11D1-A7CC-0000F87571E3}][{42B5FAAE-6536-11D2-AE5A-0000F87571E3}{40B66650-4972-11D1-A7CA-0000F87571E3}][{4CFB60C1-FAA6-47F1-89AA-0B18730C9FD3}{0F6B957E-509E-11D1-A7CC-0000F87571E3}][{A2E30F80-D7DE-11D2-BBDE-00C04F86AE3B}{FC715823-C5FB-11D1-9EEF-00A0C90347FF}]
>>>>
>>>>
>>>
>>> This is the version I cleaned up:
>>>> [General]
>>>> gPCFunctionalityVersion=2
>>>>
>> gPCUserExtensionNames=[{35378EAC-683F-11D2-A89A-00C04FBBCFA2}{0F6B957E-509E-11D1-A7CC-0000F87571E3}][{4CFB60C1-FAA6-47F1-89AA-0B18730C9FD3}{0F6B957E-509E-11D1-A7CC-0000F87571E3}][{A2E30F80-D7DE-11D2-BBDE-00C04F86AE3B}{FC715823-C5FB-11D1-9EEF-00A0C90347FF}]
>>>>
>> gPCUserExtensionNames=[{35378EAC-683F-11D2-A89A-00C04FBBCFA2}{0F6B957E-509E-11D1-A7CC-0000F87571E3}][{A2E30F80-D7DE-11D2-BBDE-00C04F86AE3B}{FC715823-C5FB-11D1-9EEF-00A0C90347FF}]
>>>>
>>>>
>>>
>>> I'm not sure how to get Zenworks to use the cleaned up version nor
>> and
>>> I too sure what those extra extensions are and how they got in there.
>> I
>>> may need to contact Novell in regards to this, but since I'm already
>>> working on an SR with them I figured I'd go ahead and post here
>> first.
>>>
>>> Any help or advice would be greatly appreciated.
>>>
>>>
>>
>>
>> --
>> Craig Wilson - MCNE, MCSE, CCNA
>> Novell Knowledge Partner
>>
>> Novell does not officially monitor these forums.
>>
>> Suggestions/Opinions/Statements made by me are solely my own.
>> These thoughts may not be shared by either Novell or any rational
>> human.
>
>
Craig Wilson - MCNE, MCSE, CCNA
Novell Knowledge Partner
Novell does not officially monitor these forums.
Suggestions/Opinions/Statements made by me are solely my own.
These thoughts may not be shared by either Novell or any rational human. -
Mobile AnyConnect group policy proxy settings
For Android or iPhone anyconnect client is it possible to have the group policy proxy settings take effect?
When connecting via desktop client these settings set the OS proxy settings. However for mobile platforms proxy settings are usually set on a WIFI connection profile.
Thanks
Sent from Cisco Technical Support Android AppHi,
As stated in this
article:
"this is a BIG, BIG, BIG development in the world of GP. Finally, Microsoft has made a clear and bold statement–don’t use IE Maintenance Policy anymore." (Windows Server 2012 and Windows 8)
So, please use Group Golicy Preference:
Computer or User Configuration\Preferences\Control Panel Settings\Internet Settings
The problem has been discussed in:
Missing Proxy Group Policy Setting - Windows Server 2012
http://social.technet.microsoft.com/Forums/en-US/winserver8gen/thread/5c03a102-7d06-462a-b821-f2d69df7ab0a
Regards,
Cicely -
Pushing Printers through Group Policy and Windows 8.1
I'l looking for help with an issue our organization is having. We are pushing out our printers through Group Policy on our Windows 2012 server. We setup a printer security group, then setup the printer on the print server (not shared). We
then created a policy under User Configuration\Preferences\Control Panel Settings\Printers\ to then do item level targeting. We then add that security group to the PC we want to get that printer. This works with our Windows 7 systems. Windows
8.1 on the other hand just has a hard time getting these policies.
My question is, is there a certain way you have to deploy printers with Windows 8.1? We would like to deploy printers going the user configuration route because that way the print jobs have to be pushed to the print server. Deploying them though
Computer Configuration doesn't give us that option.
Any help is greatly appreciated!The security group for the printer has multiple computers added to it but only the Windows 7 systems seem to get the policy applied. Attached is a screen shot(s) of how we currently have it setup.
https://drive.google.com/file/d/0B3Z5p22SZgFlODJqVVFxOXFFUHM/view?usp=sharing
Maybe you are looking for
-
Error "Item 000010 does not exist" while creating sales order in VA01
Dear All, As per customer requirement we are trying to validate shipping data( item level) and unloading point( item level) by customer enhancement. Enhancement: V45A0003 Function Module: EXIT_SAPMV45A_003 INCLUDE: ZXVVAU05 I
-
Since the 4.3 update there's a big bug with the bluetooth connection with the car system - it still exists after a factory reset: I paired the phone and the car. But every time they connect, I get a message box if I want to grant access to my phone's
-
I am programming a chat server and I want it to log any errors so i don't waste speed and stuff with swing because the idea is to have it running on a server with no screen so i need a log file so i know whats rong when it stops working. I would like
-
I am having problems with using a cfstoredproc. I am trying to pass a character chain (cf_sql_varchar) but it gives me an error message. It doesn't like that I am passing a varchar. When I pass a numeric value, it works. I used to have the same code
-
what ever I did I can't see the applets in: http://java.sun.com/products/java-media/jmf/2.1.1/samples/samples/TVWeddingSingera.html I'm getting: "loading java applet faild". I've install JMF, and Java software from http://www.java.com/en/index.jsp an