Grouped shots messed next time I load the project

I'm working on a tight schedule on this one, and for the first time I thought I'd go with grouping shots. JPO, you can harass me and give me a spank for not doing that earlier, at a later time.
So, I've grouped a bunch of shots before I started grading, and due to some personal issues that came up, I had to make it a wrap for that day being. Next day I loaded the project, all fine, except some shots are grouped in some REALLY strange manner. Shots that aren't anything like the others are in the same group, and I gotta group them all over again. Not a big deal as I've selected the shots, moved them away from each other and pressed 'G' - but the fact that I gotta regroup every single group (there's about 40-50 of them) is a bit... demotivating. I accidentally managed to do a new grade and drag it on a group, with a set of shots that should've been graded in a different style.
Frustrating ? A bit. A little inch, maybe. But I'll survive.
It all boils down to: Am I doing something wrong, or is it just Color's way of doing things, and I gotta ungroup them when I'm done grading a group?

Ahaa.. I guess I was wrong about you then. My apologies. I'm not usually a groupie myself, but I've read (or was it a video showcase at Apples website?) about someone using groups and saying something like "It's SO fast to make adjustments to an entire set of shots". And it is... just so annoying to see all those noodles being hooked up with the wrong group.
Also, you're using a fancy Tangent panel? That's probably speeding up everything quite well I guess. If I only could afford one... *mumbling and shuffling away with head down and hands in the pockets*

Similar Messages

  • Logic plugins ok one min, then " / " thru them next time I open the project

    Hi everyone. I am just finished up the final mix on an album produced in Logic. I just opened a project to find that a bunch of my Logic (non-external) plugins have a big " / " through them. I can see what plugin's they are, but it wont let me open them and they won't function.
    What happened?? Am I able to get them back somehow?? I already closed the project without saving and tried re-opening it but it didn't work. Help Anyone have the same problem?

    Try this: go to *Logic Pro>Preferences>Audio>Devices>Coreaudio*
    UNtick Enabled, REtick enabled, click *Apply Changes,* close prefs. Plugs back?

  • TS1424 I purchased and downloaded a book in iBooks.  I read about 16 chapters.  The next time I opened the app to read the book, no words loaded on the pages.  It would go to the table of contents, but not to pages in chapters.  Any ideas?

    I purchased and downloaded a book in iBooks.  I read about 16 chapters.  The next time I opened the app to read the book, no words loaded on the pages.  It would go to the table of contents, but not to pages in chapters.  Any ideas?

    Try to reset your phone, hold the home/sleep buttons until it reboots and the apple logo appears, don't release the buttons till apple logo appears.  If no luck there, Resync the book.  Or delete it and redownload it.  Downloading past purchases from the App Store, iBookstore, and iTunes Store

  • I keep losing entire catalogs. I put in 30,000 images and cannot get to them. Put in 3,000 images and get error message "LR encountered error when reading its previous cash and needs to quit. LR will fix this problem the next time it loads.' I  have loade

    I keep losing entire catalogs. I put in 30,000 images and cannot get to them. Put in 3,000 images and get error message "Light room encountered error when reading its previous cash and needs to quit. light room will fix this problem the next time it loads.'
    I  have loaded light room several times and even exited computer for 8 hours. Still get error message

    A search of this forum shows lots of threads where this issue of "error reading cache" is solved

  • Last RoboHelp HTML v9 Workspace (formerly called Environment) does not reload next time RH9 loads

    Hey all, thanks in advance for any info you can provide.  All the RoboHelp references below relate to us using the respective version of RoboHelp HTML, and on my XP SP3 pc.
    I have worked with RH7, RH8, and now RH9, but RH9 is not behaving the same as the others as it relates to Workspace (formerly called Environment in prior RoboHelp versions).  In the other versions, the last screen arrangement/Workspace always reloaded the next time you loaded RH, but with RH9, it doesn't. 
    The previous “environment”, now called “Workspace” (upper right corner) does not remain what it looked like when you last closed it, the next time you open Robo.  It resets to some weird default EVERY time, instead of looking like the last time you closed it…even though it shows you with a checkmark that it did load it (but it didn’t!)!
    My Mini-work around is, I clicked “Workspace” (upper right corner) and loaded my environment file (mark.rhs), which loads the screens the way I want them, then did a SAVE to one I called “default” and since it shows you the last two you opened, each time I load Robo, I take turns loading them…no biggie, but it just saves some time so you can choose between YOUR two named files that do the same thing screen rearranging.
    Is this a known issue in Robo9?  Is there a fix?  I have uninstalled/reinstalled many times for other reasons, but this issue has always been present, even installing the latest patches.  Thanks in advance for any feedback.

    to Peter Grainge:  Sorry for any confusion...as you state, I expect to see the same exact workspace I left when I last closed RoboHelp and if I reload my workspace/environment and all looks well, I expect to see that same screen placement the next time RH loads...but that does not always happen.
    I did what you suggested and closed several of the extraneous Pods that appeared, closed RH, and it did save those settings...BUT I then loaded my saved workspace, closed RH, and the settings were not saved as the same funky screen placement appeared.  After checking, it is not the RH defaulted workspace, but actually my saved workspace plus the "See Also", "Review Pane", and Resource Manager" Pods, which I do not use.  So, as a test, I closed those 3 Pods and resaved over one of my saved workspace files.  I now get a much better percentage of the screens being what I expect each time I load RH, but for some reason, there are times that I reload my saved workspace, exit RH, and the next time I load RH, that funky screen placement is present again.  I had an environment issue with RH8, as it could never save the windows the way I needed them, and I had to move them each tim...maybe it was due to migrating from the previous version and it using the migrated/modified .rhs file...or multiple versions installed...who knows?  ;->
    Thanks for your reply!

  • In one website, it takes to much time to load the page, in other site its not taking time, so do i need to enable or change any settings

    in one website, its taking time to load the page, on other PC its not taking any time( with internet explorer) in my PC other websites are opening quickly but this website takes too much time with firefox

    Zepo wrote:
    My iMac has been overwhelmed almost since I bought it new.  After some digging the guiness bar suggested its my Aperture library being on the same
    internal Tera byte drive as my operating system.
    Having a single internal hard drive overfilled (drives slow as they fill) is very likely contributing to your problems, but IMO "my Aperture library being on the same internal Tera byte drive as my operating system" is very unlikely to be contributing to your problems. In fact the Library should stay on an underfilled (roughly, for speed, I would call ~half full "underfilled") internal drive, not on the Drobo.
    Instead build a Referenced-Masters workflow with the Library and OS on an internal drive, Masters on the Drobo, OS 10.6.8 (there have been issues reported with OS 10.7 Lion). Keep Vault backup of the Library on the Drobo, and of course back up all Drobo data off site.
    No matter what you do with i/o your C2D Mac is not a strong box for Aperture performance. If you want to really rock Aperture move to one of the better 2011 Sandy Bridge Macs, install 8 GB or more of RAM and build a Referenced-Masters workflow with the Library and OS on an internal solid state drive (SSD).
    Personally I would prefer investing in a Thunderbolt RAID rather than in a Drobo but each individual makes his/her own network speed/cost decisions. The Drobo should work OK for referenced Masters even though i/o is limited by the Firewire connection.
    Do not forget the need for off site backup. And I suggest that in the process of moving to your new setup it is most important to get the data safely and redundantly copied and generally best to disregard how long it may take.
    HTH
    -Allen Wicks

  • I have an older version of imovie.  After I change the photos using the Ken Burns effect and save them, the next time I open the file and click 'show photo settings' to change the zoom, the picture appears black and I can't change the zoom?

    I have a five year old version of imovie that generally works fine.  However, when I add a photo using the 'Ken Burns' effect then save the movie, the next time I open the file and click 'show photo settings' the picture appears black and I cannot change the zoom.  Any suggestions?

    Have you rendered both iOS 7 and iOS 8 (both of which will work on your iPhone 5) out of the question entirely without trying every possible configuration? The animations can be disabled entirely, if that's the problem. And if the whiter-brighter user interface is the problem, there's reverse-contrast modes that darken everything. You can expose accessibility controls to gain immediate access to these functions to toggle them on and off. I guess my point is you may have decided against upgrading the OS based on an early experience with iOS 7 when Apple has since made changes in later revisions to address some of the usability complaints.
    Now, Apple's instructions for downloading older versions of apps is to do so from the Purchased list, not from the app's product page.
    See here:
    Install the latest compatible version of an app on an earlier version of iOS or OS X - Apple Support
    Let us know how that works for you.

  • When i first inst photoshop cs6 i was able to see the 3D icon, but on the next time i used the program there is no more 3D icon. when i launch photoshop it say " photoshop detected graphic hardware is not officially supported if you experience problem ple

    when i first inst Photoshop cs6 i was able to see the 3D icon, but on the next time i used the program there is no more 3D icon. when i launch Photoshop it say " Photoshop detected graphic hardware is not officially supported if you experience problem please unchecked the use graphic processor check box in the performance panel of the preference dialog" Is this the cause? If so how to uncheck that box? Thanks

    Your video card is underpowered for the task.
    Go to Photoshop > Preferences > Performance and click on the tick mark next to the box labeled "Use Graphics Processor":

  • In iTunes I'm having problems changing the "Media Kind" with a number of playlists in the OPTIONS menu from "music" to "audiobook". After going through the steps, the next time I check the items have reverted back to "music". What step am I missing?

    In iTunes I'm having problems changing the "Media Kind" in the OPTIONS menu from "Music" to "Audiobook". After going through the steps, the next time I check, the items have reverted back to "Music". What must I do to save it as an "Audiobook"?

    After more digging in the Support section here and some Google work, I turned off iTunes Match and lo and behold!  I can change the media kind to Audiobook!  So, it looks like iTunes Match locked the files up somehow and for some reason.
    I went into iTunes Store > iTunes Match > "No, Thanks" to disable it on the local PC.

  • It takes long time to load the parameter's value when running we run report

    Hi,
    It takes long time to load the parameter's value when running we run report. What could cause this? How to troubleshoot the behavior of the report? Could I use Profile and what events should i select?
    Thanks

    Hi jori5,
    Based on my understanding, after changing the parameter, the report render very slow, right?
    In Reporting Service, the total time to generate a report include TimeDataRetreval, TimeProcessing and TimeRendering. To analyze which section take much time, we can check the table Executionlog3 in the ReportServer database. For more information, please
    refer to this article:
    More tips to improve performance of SSRS reports.
    In your scenario, since you mention the query spends less time, the delay might happens during report processing and report rendering section. So you should check Executionlog3 to check which section costs most of time, then you can refer to this article
    to optimize your report:
    Troubleshooting Reports: Report Performance.
    If you have any question, please feel free to ask.
    Best regards,
    Qiuyun Yu

  • Firefox gets slower with every upgrade & now crashes every time I open a PDF, made worse when opening the next time, by reopening the PDF & crashing again

    Firefox gets slower with every upgrade & now crashes every time I open a PDF, made worse when opening the next time, by reopening the PDF & crashing again

    If you have submitted crash reports then please post the IDs of one or more crash reports that have this format:
    *bp-xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx
    You can find the IDs of the submitted crash reports on the <i>about:crashes</i> page.
    *You can open the <b>about:crashes</b> page via the location bar, like you open a website.
    See:
    *http://kb.mozillazine.org/Mozilla_Crash_Reporter
    *https://support.mozilla.org/kb/Mozilla+Crash+Reporter

  • I tried several times to setup a mail account with Thunderbird, but next time I boot the computer and start Thunderbird, no account is shown.

    I bought a new desktop PC with Win 8.1 and installed Firefox and Thunderbird.
    Then, I tried to configure the e-mail account manually (as IMAP) following the instructions provided here: https://support-en.upc-cablecom.ch/app/answers/detail/a_id/22 , but failed to configure the smtp outgoing mail server correctly (I could receive mail, but not send them). Subsequently, I deleted that account. Then, I launched the automatic mail setting tool provided by UPC Cablecom under the link http://www.upc-cablecom.ch/content/dam/www-upc-cablecom-ch/Support/executables/upc-cablecom-email-assistent.exe and it did successfully setup the account, however as a POP3 account. As I was not happy with it, I deleted the POP3 incoming mail server (and lost the received e-mails, of course...) and retried a manual setup. Doing so, I obtained an incoming IMAP mail account plus two outgoing SMTP server (comparing them, I also understood the configuration mistake I had done the first time). I then deleted the manual SMTP server as the automatically setup server worked properly.
    In this context, both receiving and sending e-mail worked OK. However, the next time I started the computer, the e-mail account disappeared and Thunderbird asked me to setup a new account again. I successfully set it up manually one more time, but the same problem surfaced again at the next boot, the e-mail account was gone...!
    Thanks in advance for your help!
    Maxonce

    Check what profile is being used.
    AppMenu button - Help - Troubleshooting Information - Profile Directory - Open Directory
    Your profile folder should open in Windows Explorer. What is the profile location?
    Reboot your computer and repeat the steps above. Has the profile folder changed?

  • Premiere Creates New .CFA files every time I open the project

    I have a project that contains 2 long (70 min.) clips.  Each time I open the project, Premiere conforms the audio for both clips.  I save the project, close Premiere, open it right back up and it starts conforming the audio again.
    I have tried changing where Premiere stores the audio preview files, but no matter what I do, Premiere puts the .CFA files where it wants.
    I have 8 versions of the same .CFA files - and the next time I open Premiere, I'll have 9.
    Any help would be much appreciated!

    I took a look at the Troubleshooting link you posted, and it was a little helpful but isn't quite up to date.  For example, it says to specify a new location for conformed audio files by choosing Edit > Preferences > Scratch Disks, which isn't an actual menu tree in CS4.  Here is how I've set things up:
    I have gone to  Edit > Preferences > Media and set the location for Media Cache Files to C:\PPro_Video and set the Media Cache Database to the same folder.  When prompted, I chose to delete the existing Media Cache database file.  I left the "save media cache files next to originals when possible" box unchecked.
    Then I have gone to Project > Project Settings > Scratch Disks and set the Audio and Video Preview files to the same folder (C:\PPro_Video)
    I saved the project, closed Premiere, and deleted everything inside C:\PPro_Video.
    I restarted Premiere and opened my project.  Premiere created three folders inside C:\PPro - Media Cache, Media Cache Files, and Adobe Premiere Preview Files.  I then waited while Premiere created the .CFA and .PEK files inside C:\PPro\Media Cache Files.  Once they were done, I closed Premiere.
    Reopened the project.  Premiere immediately begins to conform the audio again.  I look inside C:\PPro\Media Cache Files and see new versions of PEK and CFA files being created with the same file names suffixed by an _1.
    Setting aside, for the moment, that using my C drive for a scratch disc might not be optimal, what am I doing wrong?

  • IMovie 09 freezes each time I open the project I'm working on. Help?

    iMovie 09 freezes each time I open the project I'm working on. It has worked perfectly fine the past week, but now it won't load different aspects of the screen. For example, when I role over the screen the video will play in the small play back screen, but I can't actually see the film strip or make any changes. Any suggestions? I need to finish this video for work - would love any help!

    Try trashing iMovie's preference file. See this User Tip by AppleMan1958:
    https://discussions.apple.com/docs/DOC-4061
    The Tip relates to iMovie '11. For iMovie '09 the preference file is named "com.apple.iMovie8.plist" and will be found in your Home folder Library/Preferences (NOT the Library folder at the top level in Macintosh HD).
    John

  • FCP Crashes every time I load this project

    I am quite new to FCP and recently have been sent a project that was originally laid down by my colleagues in India. He has sent me supposedly all of the files on a DVD, when I open the fcp project I get the message I have to reconnect the media, this I do but some files cannot reconnect. during this time before I get chance to render the project and all within 1-2mins of loading the project the program crashes with an error report stating "Final Cut Pro quit unexpectedly while using the lib3ivxEnc.dylib plugin". There is a long list of text that I do not know what it means but I cannot simply open the project without crashing.
    Can anyone help direct me what to do?

    First of all, have you moved the project in question, media and all to one of your hard drives?
    2nd, try NOT reconnecting, then saving the project under a new name, exiting FCP, opening the new project and relinking the media. If that crashes, Digital Rebellion has a utility that will examine all the media in an FCP project and tell you which is corrupt.
    http://www.digitalrebellion.com/fcsmaintenance/
    If you don't want to spend the money, try this:
    Open the saved project, don't relink the media. Select half the clips in the browser. Right/ctrl-click and select Relink. If that is unsuccessful, open the project again and select the other half and try again. If successful, save and select half the remaining, relink, repeat.
    The goal is to half-by-half find out what media is crashing your system.
    Patrick

Maybe you are looking for

  • ITunes no longer syncs with iPad 1 or iPhone 4

    I can not longer sync my iPad 1 or iPhone 4 to my Mac Pro (Lion) Everything was fine yesterday (with Lion); not sure what changed. My iPhone will charge thru the USB cable, but my iPad will not. I have tried restarting iTunes, my Mac Pro and my iPad.

  • No excise duty for exports

    Just so that I don't violate forum rules. I searched this forum for the keywords "Exports Excise Invoice". Did not find a question in the first three pages. So, I am posting mine. Hello, I'm working on a export scenario, I want the excise invoice NOT

  • Matl. where used list

    Hi Frndz, what is the t. code to see material where used report? I want to see usage of matls in BOM,Routings, Pro.orders and also it's qty. in stock at a glance. Thanks in advance, Rohit.

  • I cannot get Adobe Reader 11 to work - what have I done wrong?

    I cannot get Adobe Reader 11 to work - what have I done wrong?

  • Help for Exefcise

    Hello everyone. I am a college student who has an exercise for Oracle BPM enviroment. I must describe all products of Oracle in Business Process Management. But i can't understand the differences between all this products ( Oracle SOA Suite , Oracle