Grouping and expanding objects
This question was posted in response to the following article: http://help.adobe.com/en_US/illustrator/cs/using/WS714a382cdf7d304e7e07d0100196cbc5f-62c7a .html
I don’t think so, unless someone has invented a script for doing it.
And by the way, strokes are still ‘objects’, just as they are after expanding.
A better term would probably be ‘open paths with stroke’ or something like that.
Similar Messages
-
Is there an efficient way to add an object to an existing group without having to ungroup, regroup, and rename the group?
Thanks, Nimmy. I see now why I never discovered that option: I'm always using the Timeline to select objects to group, ungroup. The shortcut CTRL-G works perfectly there, but to be able to add an object in the way you explain, you have to move the cursor to the stage, otherwise CTRL-G will not be functional (bit like shortcut keys for moving, resizing not functional if you do not move the cursor to the stage). Perhaps I'm not very normal, I will rarely use menus if there is a shortcut key, but see that mostly those shortcut keys are never mentioned by the staff. Is there a particular reason for that omission?
Lilybiri -
See my question !!!
Hi Johnandhanna
This question relates to Microsoft Office and you've posted it to an Apple community. The best place for all MS Office for Mac questions is at:
http://answers.microsoft.com/en-us/mac?auth=1
In regard your question, the answer is yes, it does still exist. You need to select the items first (so you get the 4 arrowed cross cursor) and then right-click on them to access the Grouping submenu.
Hope this helps.
Joe. -
PS CS6: It'd be helpful to have the option to collapse or expand the nested groups and layers all at once. Autodesk Maya has a similar feature in it's outliner that allows for you to do this.
And as Jeffrey Tranberry answered there:
• Open/close all layer groups (folders) at the current level of hierarchy: Cmd-click the arrow next to the group - This is handy when you want to open/close, say, all the top-level groups without disturbing the open/closed state of any groups nested within them.
• Open/close all layer groups nested within the current one: Opt-click the arrow next to the group - This is nice when you want to open/shut a bunch of nested groups, without affecting any that lie outside the target group.
• Open/close all layer groups, period: Cmd-Opt-click the arrow next to a group So, to keep things simple: when in doubt, Cmd-Opt-click a group’s arrow and you’ll collapse/expand all groups.
* On Windows please substitutes Ctrl for Cmd and Alt for Opt. . -
About report groups and read programs for the object EC_PCA_SUM
Hi Friends,
Hope every one is doing well..!
I've an issue with the report groups and read programs for the object EC_PCA_SUM. As we know that the report groups and read programs available for this object in the application customizing are used to analys the archived data.
That is these programs comes into picture after the archiving operation.
For more information, you can visit the below web site:
[http://help.sap.com/erp2005_ehp_03/helpdata/EN/e4/69f353b75a11d1b5850000e82debc6/frameset.htm]
Now, my question is how would I check the code for these analysing programs available for this object. I can't see this in SE38.
Thanks to reply for this..
Full marks will be awarded.
Regards,
ShamimHi Lakshman,
Thanks for the reply.
Hi Deiter,
You're right.
Your provided transaction "GR55" helped me to find out the program name for a particular group. However, these are just Write and Painter reports.
But can you please let me know the functionality of these report groups ?? what are these used for ???
Do we have these programs for other archiving objects like CO_ITEM,CO_ML_BEL,MM_MATBEL,CO_ORDER,
PP_PLAN,PP_BKFLUSH ??
More points will be awarded.
Thanks a lot.
Regards,
Shamim
Edited by: S H A M I M on Sep 19, 2008 3:19 PM -
ICR 002 - Object Groups and Sets
Hi,
Tcode here is FBCR009.
I need one help on the PROCESS 002 for ICR. In the current system, we have implemented the Object groups and Sub groups as mentioned below:
Object Group - 100
Object Subgroup 100
Object group Sequence Company Field Company Set Description Partner Field Partner Set description
100 1 RACCT RULE2A B/S Cash Management RACCT RULE2B B/S Cash Management
100 2 RACCT RULE3A B/S ST Interest Bearing RACCT RULE3B B/S ST Interest Bearing
100 3 RACCT RULE4A B/S ST Non-Interest Bearing RACCT RULE4B B/S ST Non-Interest Bearing
100 4 RACCT RULE5A B/S ST Non-Interest Bearing Derivatives RACCT RULE5B B/S ST Non-Interest Bearing Derivatives
100 6 RACCT RULE7A P&L LT Interest RACCT RULE7B P&L LT Interest
100 7 RACCT RULE8A P&L ST Interest RACCT RULE8B P&L ST Interest
100 8 RACCT RULE9A P&L Toll RACCT RULE9B P&L Toll
100 9 RACCT RULE10A P&L Royalties RACCT RULE10B P&L Royalties
100 10 RACCT RULE11A P&L Rent RACCT RULE11B P&L Rent
100 11 RACCT RULE12A P&L Brokerage Commission RACCT RULE12B P&L Brokerage Commission
100 12 RACCT RULE13A P&L Warehousing RACCT RULE13B P&L Warehousing
100 13 RACCT RULE14A P&L Misc/Other RACCT RULE14B P&L Misc/Other
100 14 RACCT RULE15A P&L Insurance RACCT RULE15B P&L Insurance
100 15 RACCT RULE16A B/S LT RACCT RULE16B B/S LT
I am a little confused here. The following sets under the sub-group has a logical u201CANDu201D . the customer corporate reporting group would like to see the Config to allow each group of accounts defined as ruleXa reconciled to group of accts defined as ruleXb, e.g.
Rule 2A with Rule 2B
Rule 3A with Rule 3B etc
Each Company set should only reconcile with the partner set.
looked at this OSS Note 1499183 - ICR: Documents are not assigned to the object groups & got even more confused.
Request if you can advice here.
Regarzds
AahishHello Johannes,
Unfortunately what you are trying to do is not possible.
Object groups are defined using the information in the totals table. Therefore fields only available in the line item table cannot be used when setting up object groups. Unfortunately it is also not possible to set up status fields on the totals level because of the standard update process of those fields when setting a status (the line item table is modified directly, there is no totals update). Depending on the details of your setup you might be able to simply add a "normal" field on the totals level and then fill it via BADI. This would probably work quite well if the field does not have to be set manually - and in this case you do not really need the functionality of setting a status manually either.
I hope this helps you in your efforts!
Ralph -
Illustrator Crashing when labeling Layers, Groups and Objects - Windows 7
For some reason Illustrator seems to crash (fairly consistently) when labeling Layers, groups and objects with a common label - so ctrl+v each label.
Generally, I can label around 3 in a row before it crashes. I've replicated this error working both on and off the network. Our operating system is Windows 7Version: Illustrator CC (up to date)
Language: English UK
Group/ object label example: hr.style: gradient transparency.
this error seems to occur when the files are over 500KB - also the files are purely vector and contain very little in the way of transparencies. -
Differance b/wObject Group and Object Lirary?
plz,
tell me the main differance b/w object groups and object libraries,in which seanrio we will use object group or object library?Here is the main difference between them:
About the Object Library
In any development environment, you will always have standards to which you want your developers to adhere as well as common objects which can be reused throughout the development effort.
The Object Library provides an easy method of reusing objects and enforcing standards across the entire development organization.
You can use the Object Library to:
* Create, store, maintain, and distribute standard and reusable objects.
* Rapidly create applications by dragging and dropping predefined objects to your form.
* There are several advantages to using object libraries to develop applications:
* Object libraries are automatically re-opened when you startup Oracle Forms, making your reusable objects immediately accessible.
* You can associate multiple object libraries with an application. For example, you can create an object library specfically for corporate standards, and you can create an object library to satisfy project-specific requirements.
* Object libraries feature SmartClasses-- objects that you define as being the standard. You use SmartClasses to convert objects to standard objects.
Object Group
A container for a group of objects, used to provide the ability to copy or reference related objects.
For more informations, have a look here
[http://www.oracle.com/webapps/online-help/forms/10g/state?navSetId=_&navId=0|http://www.oracle.com/webapps/online-help/forms/10g/state?navSetId=_&navId=0]
Hope it helps you,
Fabrizio
If this answer is helpful or correct, please mark it. Thanks.
Edited by: Fabrizio Delli Priscoli on 23-mar-2009 9.06 -
What is the difference between function groups and Object Orientation
Hello all
I have read about this on the help.sap.com site, I still do not understand it completely, can some one explain me with a simple example please ? (Not the increment counter example please !).
Thanks a ton.
Rgds
SameerHello Sameer
When you call a module of a function group for the first time in your program then the entire function group is loaded. However, this can happen only once within your report and all global variables within the function group will have the same values all the time (except they are manipulated via fm's).
In contrast, you can create as many instances of the same class as you want and all of them can have different global attributes. And all these instances are independent of each other.
On the other hand, if fm_A changes global attributes of the function group and fm_B reads these attributes then fm_B read the changed values.
Or in other words:
Function Group = can be instantiated only ONCE
Class = can be instantiated unlimited
Regards
Uwe -
Expanding text boxes, pagination and expanding to another page
Attached is a link to a simple form which is actually part of a much larger form. It has several nested add and remove instances. I have three fairly simple issues I need to solve.
1. Is it possible to set a text box to allow it to grow in height as information is added that exceeds the size of the text box. This feature is available as a property in Microsoft Access as an example. I know you can allow multiple lines but you can see them all without the expanding feature.
2. This form is design to grow by adding instances. I would like to set up the pagination so it would flow to additional page(s). I think I would just like the line
to continue to flow to the next page without creating a break in the primary instance if that makes sense (the top level of the instances - mode). This level could theoretically by larger than one page so this is probably best route to go. Currently it's not flowing at all to the 2nd page.
3. Somehow I ended up with a 2nd page to the form. How do I delete that but yet have the expanding form automatically create a 2nd, 3rd (etc) page as required.
http://share.planswift.com/download/?file=W0H3U2V5-GOPO-FI9G-1UIG-OTYPHTB46HB
Thanks,
PatrickHi Patrick,
I can't make changes to your form at the moment, but there are a few things you need to bear in mind. If you want items to expand and push objects down, then you will need a Flowed layout.
See this example about making fields dynamic: http://assure.ly/g80MVY.
Also this looks at the difference between Flowed (where you want to get to) and Positioned (where you are now) subforms: http://assure.ly/eSGQMt.
Yes, just select the textfield and go to the LAyout palette. There under height, tick Expand to fit. If you preview this you will see that it expands, BUT will cross over objects beneath it. This is where you need to group objects in a Flowed subform, so that when it expands it will push objects down.
The page needs to be set to Flowed. There are pagination settings available under the Object palette and you can start with Place = Follow previous and then Continue filling parent. You also want to make sure that for the subforms (and textfields) you have set in the Object palette that content is allowed to break over pages.
Check your pagination settings.
Hope that helps,
Niall -
Catalogs, code groups and codes not available in service order in Web UI
Hi,
I have created and maintained a subject profile for the service orders that i am using for my business scenarios. The same is visible under the objects tab in transaction data of the service order business transaction in the SAP GUI.
However the same are not visible anywhere in the Web UI (they are not available in the list of available fields as well in BSP_WD_CMPWB for BT116H_SRVO).
Can some1 pls advice me with the steps so as to make the catalogs, code groups and codes in my service orders available in the Web UI screen as well.
Will really appreciate if detailed steps are provided since I am new to Web UI technology.
Warm regards,
DPDeepak,
I'm 99% sure (although dont quote me as I dont have a developer key so I cant finish my testing) that you're missing the context Nodes - so although you have the assignment block yuo have no link between the code set and the service order header. You havent referenced them in your comments on this post in any case.
Try this:
Go into BSP_WD_CMPWB
In the Browser component Structure open folder Component > Views
Double-click BT116H_SRVO/DetailsOV and in the structure expand to BT116H_SRVO/DetailsOV > BT116H_SRVO/DetailsOV > View Controller > DetailsOV.do > Context
Right-click on folder Context Node and click Create
Follow through the wizard defining a Z context Node (e.g. ZBTSubject) and a Model Node of BOL Entity BTSubject
Define any Dependencies etc you may wish to have and so on (most of the wizard is optional)
Repeat the same for the BOL Entity BTSubjectSet
Now go back in and see if your values are populating. I'm not a developer (and never have been), so I cant guarantee this will work as I dont have a developer key to test this, but I am quite sure that this needs to be done for you to get your values populating.
Good luck, Merry Christmas and a Happy New Year (& please award points if useful!)
Andrew Griffin. -
Wsus query needed - get WSUS-Computers, belonging WSUS-Group and Not Installed Count
Hi,
i try to find a way by using basic WSUS powershell cmds in combination with piping in Server 2012 R2 to get all registered computers in WSUS plus belonging WSUS-Group and Update "Not Installed Count" as output.
Is that possible?
I tried multiple times and enden up in using posh - is there no way based on standard powershell commandlets.
Thank you
PeterHi Michael,
it seems that you are right :(. I tried out a few things with powershell (source
http://blogs.technet.com/b/heyscriptingguy/archive/2012/01/19/use-powershell-to-find-missing-updates-on-wsus-client-computers.aspx) - big problem is that i actually cant get belonging WSUS Group to Server object. I only are able to get all WSUS Groups
but cant find the right sytax to get only belonging ones.
Any ideas?
Thanks
Peter
#Load assemblies
[void][system.reflection.assembly]::LoadWithPartialName('Microsoft.UpdateServices.Administration')
#Create Scope objects
$computerscope = New-Object Microsoft.UpdateServices.Administration.ComputerTargetScope
$updatescope = New-Object Microsoft.UpdateServices.Administration.UpdateScope
#Gather only servers
$ServersId = @($wsus.GetComputerTargets($computerscope) | Where {
$_.OSDescription -like "*Server*"
} | Select -expand Id)
#Get Update Summary
$wsus.GetSummariesPerComputerTarget($updatescope,$computerscope) | Where {
#Filter out non servers
$ServersId -Contains $_.ComputerTargetID
} | ForEach {
New-Object PSObject -Property @{
ComputerTarget = ($wsus.GetComputerTarget([guid]$_.ComputerTargetId)).FullDomainName
ComputerTargetGroupIDs = ($wsus.GetComputerTarget([guid]$_.ComputerTargetId)).ComputerTargetGroupIds
ComputerTargetGroupNames = ($wsus.GetComputerTargetGroups())
NeededCount = ($_.DownloadedCount + $_.NotInstalledCount)
#DownloadedCount = $_.DownloadedCount
NotInstalledCount = $_.NotInstalledCount
#InstalledCount = $_.InstalledCount -
I have evaluated the following products.
Quest (Dell) MessageStats
Enow
StealthAudit
StealthAudit looked to be the best as they also group like mailboxes with like permissions for Office 365 migrations, but this was by far the most expensive.
We are looking to clean up our environment to eventually migrate to Office 365. Any advice on a product that would report on unused Mailboxes, unused Distribution Groups, and unused Public Folders that would be great.
dHi,
In your case, you can use the following cmdlet to determine unused mailboxes. If a mailbox has never logged on, the Lastlogontime is empty.
Get-Mailbox|Get-MailboxStatistics |fl DisplayName,Lastlogontime
Use the cmdlet below to get publicfolder's last access time.
Get-PublicFolderStatistics |fl name,LastAccessTime
Get all distribution lists used over last 30 days.
Get-MessageTrackingLog -EventId Expand -ResultSize Unlimited |Sort-Object RelatedRecipientAddress | Group-Object RelatedRecipientAddress |Sort-Object Name | Select-Object @{label=”PrimarySmtpAddress”;expression={$_.Name}}, Count
Hope this can be helpful to you.
Best regards,
Amy Wang
TechNet Community Support -
Logical Volume Group and Logical Partition not matching up in free space
I was dual booting Windows 7 and Mountain Lion. Through Disk Utility, I removed the Windows 7 Partition and expanded the HFS+ partition to encompass the entire hard drive. However, the Logical Volume Group does not think that I have that extra free space. The main problem is that I cannot resize my partition. I am wanting to dual boot Ubuntu with this. Any ideas? Any help is appreciated. I will post some screenshots with the details. Furthermore, here are some terminal commands I ran: /dev/disk0
#: TYPE NAME SIZE IDENTIFIER
0: GUID_partition_scheme *250.1 GB disk0
1: EFI 209.7 MB disk0s1
2: Apple_CoreStorage 249.2 GB disk0s2
3: Apple_Boot Recovery HD 650.0 MB disk0s3
/dev/disk1
#: TYPE NAME SIZE IDENTIFIER
0: Apple_HFS MAC OS X *248.9 GB disk1 Filesystem 1024-blocks Used Available Capacity iused ifree %iused Mounted on
/dev/disk1 243031288 153028624 89746664 64% 38321154 22436666 63% /
devfs 189 189 0 100% 655 0 100% /dev
map -hosts 0 0 0 100% 0 0 100% /net
map auto_home 0 0 0 100% 0 0 100% /home CoreStorage logical volume groups (1 found)
|
+-- Logical Volume Group 52A4D825-B134-4C33-AC8B-39A02BA30522
=========================================================
Name: MAC OS X
Size: 249199587328 B (249.2 GB)
Free Space: 16777216 B (16.8 MB)
|
+-< Physical Volume 6D7A0A36-1D86-4A30-8EB5-755D375369D9
| ----------------------------------------------------
| Index: 0
| Disk: disk0s2
| Status: Online
| Size: 249199587328 B (249.2 GB)
|
+-> Logical Volume Family FDC4568F-4E25-46AB-885A-CBA6287309B6
Encryption Status: Unlocked
Encryption Type: None
Conversion Status: Converting
Conversion Direction: backward
Has Encrypted Extents: Yes
Fully Secure: No
Passphrase Required: No
|
+-> Logical Volume BB2662B7-58F3-401C-B889-F264D79E68B4
Disk: disk1
Status: Online
Size (Total): 248864038912 B (248.9 GB)
Size (Converted): 130367356928 B (130.4 GB)
Revertible: Yes (unlock and decryption required)
LV Name: MAC OS X
Volume Name: MAC OS X
Content Hint: Apple_HFSHere is another try via the command line:
dhcp-10-201-238-248:~ KyleWLawrence$ diskutil coreStorage resizeVolume BB2662B7-58F3-401C-B889-F264D79E68B4 210g
Started CoreStorage operation
Checking file system
Performing live verification
Checking Journaled HFS Plus volume
Checking extents overflow file
Checking catalog file
Incorrect block count for file 2012.12.11.asl
(It should be 390 instead of 195)
Checking multi-linked files
Checking catalog hierarchy
Checking extended attributes file
Checking volume bitmap
Checking volume information
Invalid volume free block count
(It should be 21713521 instead of 21713716)
The volume MAC OS X was found corrupt and needs to be repaired
Error: -69845: File system verify or repair failed -
PO Change according to material group and G/L Account no.
Hi Expert,
I have a requirement of "PO Change according to material group and G/L Account no.". I am using BAPI_PO_CHANGE.
But it is giving error.
"I 06 684 Releases already effected are liable to be reset
E BA 003 Instance 4500010532 of object type PurchaseOrder could not be changed
E ME 046 Purchase order item 00010 still contains faulty account assignments
W ME 039 Goods receipt posted unvaluated due to multiple account assignment
E ME 083 Enter G/L account no."
Can any body tell me how to fill this BAPI.......
Even i am trying to debug standard tocde of PO but it is not calling bapi BAPI_PO_CHANGE.
Could you please help me on this.
Regards
Sanjay KumarHello,
To assign material group to G/l account you have to matain valuation class for Material group
SPRO >> Materials Managment >> Purchasing >> Material Master >> Entry aids for items with out material master.
Assign this valaution class to G/l in OBYC.
Regards,
Shailesh
Maybe you are looking for
-
How do I use the VIs for the Fluke Hydra Series 2620a multimeter?
This message refers to the VIs found at this link: http://sine.ni.com/apps/we/niid_web_display.download_page?p_id_guid=E3B19B3E9468659CE034080020E74861 How do I use the VIs for the Fluke Hydra Series 2620a multimeter? I am conducting a Senior Design
-
How to link my favorit list to t-codes and folders
Hi! I have a favorit list on the EP7 left panel. I want to link the listed items to some frequently visited transactions and EP folders. I thought it would be easy but anyway I could not find a way to do it. I think I have the right roles. Please hel
-
Multilangu​age @ Labview 7 Express
Hello .:-) I'm beginner in LabView. Two weeks ago I received a system with LabView application as a HMI system for control. The problem I have is how to implement a switchable second language for all texts in all VI's. Please help ! Thanx in advance
-
Hi, I know this question has been asked a number of times but none of the answers solve my problem. I need to update a ztable after the document has been cleared. Though 1030 BTE gives the document number but it is not actually commited to the DB tab
-
Ref. Operation Set for Trigger Point
Friends, I m doing Trigger points in CO11N. Production Order quantity is 10. While confirmation yield qty. 7 & rework qty is 3. After saving trigger point function pop up but after pop up of ref. operation set, i m selecting Group and Task list type,