GRPO received and A/P has been made of FULL Qty but still *OPEN*

Hello Experts,
GRPO is fully received and A/P Invoice has been made of full Qty (having only one row in GRPO). But still GRPO is open.
Please guide
Thanks & Regards,

Hai Shazad Nazir
                  Am using 2005 B pl40 i have also face this same problem some time,i found the reasion ,if Your GRPO FreightName is different from A/P Invoice FreightName means your GRPO will not be close,If this is your case means close yuour GRPO using right click in GRPO and close it.

Similar Messages

  • I have a iPhone 4 and lately it has been shutting down randomly when I still have battery left. It also doesn't turn back on, until I plug it in to the charger. But when I plug it in, the low battery sign shows up then comes to the lock screen with 68%.

    I have a iPhone 4 and lately it has been shutting down randomly when I still have battery left. It also doesn't turn back on, until I plug it in to the charger. But when I plug it in, the low battery sign shows up then comes to the lock screen with like 68% left.

    Morning Clementine Lin,
    For more information this, please see this article:
    iPhone: Hardware troubleshooting
    http://support.apple.com/kb/ts2802
    Take a look at the Will not turn on, will not turn on unless connected to power, or unexpected power off section.
    Have a nice day,
    Mario

  • IR has been completly done on PO,but still has open items in MIRO.

    Hi MM experts,
    IR has been completly done on PO ,but still system allowing us to do  MIRO against PO.
    How it is possible.
    Current PO status:
    This is intercompnay PO (plant to plant stock transfer) not STO.  PO Qty is 60,000 KG, they have done GR partially quanties (many GR's). Delivery/PGI/GR/IR has been completed fully on PO.
    why SAP still allowing us to do MIRO against that PO? can any one tell me?
    Regards
    Suresh

    Or Check ME2L report ,filter on field "To be Invoice Qty " and "To Be Invoice Value , difference the post through MR11 if not required any further MIRO in the system.
    Thanks & Regards,
    Sandesh Sawant

  • My iphone 4 wont receive and make call i already  did reset networ setting but still wont work..help me pls..

    anyone can help me about my prblem on my iphone 4,.my phone wont receive  and make calls..i already did the reset network setting,and off the 3G ..but still wont work..help pls..thks

    try easy first.  if pre paid make sure you have not ran out of date,might need top up.  if on contract check with your provider to see if they have stopped your account, if all fails ring apple

  • I have updated my iphone 4 and all of my music has been removed from my iphone but still in my itunes. How can i get my music back because when i sync none of the music goes back across?

    Problems with syncing.. Anyone help?

    This will happen if you have photos in your camera roll and an out-of-date scanner or webcam driver. See this: http://support.apple.com/kb/TS1502

  • HT204371 Hallo - I'm sure this question has been asked many times before but still can't get my head around it

    I have an 'n' version Airport Express (1st Generation) and want to use it to AirPlay music from iTunes on my Mac to my HiFi in the next room. That's all I want to use it for. Have set it up to join an existing wireless network. However it will only work with an ethernet cable connected to the router. Loses the green light when cable is unplugged. As the hifi is in the next room I want it to work wirelessly, otherwise there'll be cables everywhere (as at present - ugh!) What do I have to do?  What setting needs to be changed. Thanks.

    Well, I'd all but given up and decided I'd live with it ethernet connected with wires draped everywhere...then I had another look this moring and found this:
    http://support.apple.com/kb/TS2098
    I have a non Apple, older (Thompson) router. After a factory reset, and when going through the 'join existing network' procedure when sked for the WEP password you need to put a $ before the password...and hay presto...the set up completes and...AirPlay works!  I suspect many might not have discovered this page of support information and will have been as frustrated as me for many many hours!

  • I have had Elements 13 since November & it has been fine until now. Organizer still opens, but now Editor will not load.

    PHOTOSHOP Elements 13. Had it since November. Now organizer loads, but editor will not. Read all instructions, find them hard to follow re troubleshooting, but nothing seems to cover my problem? What do I do?

    Mac or PC?
    What OS version?

  • HT5622 I have re set my password and have received confirmation that the change has been made by email.....however  when I enter the new password ....the system tells me it is incorrect ????

    I have re set my password and have received confirmation that the change has been made by email.....however  when I enter the new password ....the system tells me it is incorrect ????

    Sign out of Apple ID, re-start and sign in again.

  • TS3276 ppl i fed up with my mac air while using my exchange email account, it takes ages to refresh and it doesn't send or receive instantly , no clue although that the same setting and server names has been set up on my iPhone and it is working fine

    ppl i fed up with my mac air while using my exchange email account, it takes ages to refresh and it doesn't send or receive instantly , no clue although that the same setting and server names has been set up on my iPhone and it is working totally fine

    Install ClamXav and run a scan with that. It should pick up any trojans.   
    17" 2.2GHz i7 Quad-Core MacBook Pro  8G RAM  750G HD + OCZ Vertex 3 SSD Boot HD 
    Got problems with your Apple iDevice-like iPhone, iPad or iPod touch? Try Troubleshooting 101

  • I don't understand the thing you call live bookmarks never used it, and most forums I have used notify VIA E-mail not giving out my E-mail address information when a reply has been made to the thread in question.

    So how do I get notified of updates in this forum? As I said: I don't understand the thing you call LIVE BOOKMARKS I have never used them, and most forums I have used notify VIA E-mail not giving out my E-mail address, or other private information when a reply has been made to the thread in question, so how do I get notified of updates in this forum? I have seen no normal options for setting my viewing preferences used for this forum. Thank You.

    Thanks for your reply via email/msg. He wrote:
    If you are interested in the actual design data for the Xeon processor, go to the Intel site and the actual CPU part numbers are:
    Xeon 4 core - E5.1620v2
    Xeon 6 core - E5.1650v2
    Xeon 8 core - E5.1680v2
    Xeon 12 core - E5.2697v2
    I read that the CPU is easy to swap out but am sure something goes wrong at a certain point - even if solderedon they make material to absorb the solder, making your work area VERY clean.
    My Question now is this, get an 8 core, then replace with 2 3.7 QUAD CHIPS, what would happen?
    I also noticed that the 8 core Mac Pro is 3.0 when in fact they do have a 3.4 8 core chip, so 2 =16? Or if correct, wouldn't you be able to replace a QUAD CHIP WITH THAT?  I;M SURE THEY ARE UO TO SOMETHING AS 1) WE HAVE SEEN NO AUDIO FPU OR PERHAPS I SHOULD CHECK OUT PC MAKERS WINDOWS machines for Sisoft Sandra "B-E-N-C-H-M-A-R-K-S" -
    SOMETHINGS UP AND AM SURE WE'LL ALL BE PLEASED, AS the mac pro      was announced Last year, barely made the December mark, then pushed to January, then February and now April.
    Would rather wait and have it done correct than released to early only to have it benchmarked in audio and found to be slower in a few areas- - - the logical part of my brain is wondering what else I would have to swap out as I am sure it would run, and fine for a while, then, poof....
    PEACE===AM SURE APPLE WILL BLOW US AWAY - they have to figure out how to increase the power for 150 watts or make the GPU work which in regard to FPU, I thought was NVIDIA?

  • I am receiving a message that my ID has been disabled, and I followed the steps to change the password, but still receive the same message.  Cannot access app store or do updates.

    I am receiving a message that my ID has been disabled, and I followed the steps to change the password, but still receive the same message.  Cannot access app store or do updates.

    In what way are you receiving this message? It is very common to get an email telling you that your ID has been disabled, and asking you to confirm all your details so the sender can steal your identity online.....

  • I am Greek. I downloaded a film from ipad but for the last days it has not been downloaded and the status is "waiting".the charge has been made to my credit card. Does any body knows?

    I am Greek. I purchased a film from ipad but for the last days it has not been downloaded and the status is "waiting".the charge has been made to my credit card. Does any body knows?

    something other is dowloading somewhere on ipad

  • I have been a customer of ITunes and Apple since 2007. Movies, Apps, Music and books  Itunes has been my only source for my media needs.

    I have been a customer of ITunes and Apple since 2007. Movies, Apps, Music and books  Itunes has been my only source for my media needs. 397 Apps 759 Songs over 100 Videos 13 books 3 IPhones 2 IPods So here is my problem with ITunes I purchased an App and it is identical to one I have already brought. The App description did not say anything that it would not do what I was trying to do. I wrote sup[port and asked if they could issue a credit. Mari at support wrote back and said he checked with his supervisor and they could not issue a credit.  I told them what a good loyal customer I have been to Itunes and Apple and they still refused.  Granted the App did not cost a lot of money (3.99) but it’s the principle. With customers having options to shop anywhere I would think a business would do whatever it takes to retain the loyal customers they do have Occasionally I rush to buy an App without fully understanding if it meets my needs. According to ITunes support that has occurred nine times. Here is the last reply that I received Roger, I know how frustrating it can be when things don't work the way they should be  and I do apologize for the inconvenience that this may have caused you. I am sorry but we could not be able to grant your request as we have made 9 exceptions on you. For more information on Apple's requirements for using the iTunes Store, please refer to the iTunes Store Terms and Conditions:http://www.apple.com/legal/itunes/us/terms.html Again, I am hoping for your kind understanding regarding this matter. Sincerely Mari iTunes Store/Mac App Store Advisor

    "The App description did not say anything that it would not do what I was trying to do."
    You've already had 9 refunds? You understand that apps are sold on a non-return policy, presumably. You bought an app that didn't claim to do something that you wanted from it, and now that you've found that it doesn't, you want your money back.
    Perhaps you've failed to explain your point properly but I can't see why you expect any sympathy from users here, not that it would make any difference. Only the store staff can issue refunds if they think appropriate. Chalk it up to experience. You could even contact the developer in advance of a purchase if you want to be certain an app does what you want. Then if it really fails to live up to the promise you would at least have a better argument for a refund.
    tt2

  • How to stop Facebook from e-mailing me that a FB post has been made

    I don't want e-mails from FB saying that a post has been made. I will go to FB directly to keep current. Do I change settings on Mozilla and if so, how? Or, do I make some kind of change in FB? If so, how?

    Change your settings on Facebook. Thunderbird receives email sent to you. It cannot control what is sent.

  • ReportServer intengration error - An attempt has been made to use a data extension 'ADS'

    For a moment I thought I had the perfect SharePoint 2010 installation going until I went and created an Access Database site added some data then went to reports. I am getting the following error.
    An error has occurred during report processing. (rsProcessingAborted)
    An attempt has been made to use a data extension 'ADS' that is either not registered for this report server or is not supported in this edition of Reporting Services. (rsDataExtensionNotFound)
    Other than that, life is good. I have pretty much uninstalled and stuff repeatedly. I'm about to do another uninstall, reinstall because Monitorying isn't showing any errors. Which it should be, but that's another post; should the issue return.
    But if anybody has any ideas about the ADS thing I would sure like to hear it.
    Thanks!
    Oh, the system is the following:
      Server 2008 R2 Standard
      SQL Server 2008 R2
      SharePoint 2010 Release with 2010 October CU updates. I ran the CUs just before running SharePoint Configuration.
    At the moment it is all house on the same machine; but if it goes to production then it will be turned in to a two-tier system.

    OK - seems like we just have to read the manual!
    You'll have to install the Reporting Services Add-in for Connected Mode:
    A. Modify the C:\Program Files\Microsoft SQL Server\MSRS10_50.MSSQLSERVER\Reporting Services\ReportServer\rsreportserver.config file on the Reporting Services server.
    Under the <Data> node, under the <Extension> node, add the ADS data extension. For example:
    <Extension Name="ADS" Type="Microsoft.Office.Access.Reports.DataProcessing.AdsConnection, Microsoft.Office.Access.Server.DataServer, Version=14.0.0.0, Culture=Neutral, PublicKeyToken=71e9bce111e9429c"/> -->
    B. Modify the rssrvpolicy file on RS server.
    Add the following XML code in the file under the <NamedPermissionSets> node:
    <PermissionSet class="NamedPermissionSet" version="1" Name="ReportExpressionsDefaultPermissionSet">
      <IPermission class="SecurityPermission" version="1" Flags="Execution" />
      <IPermission class="Microsoft.Office.Access.Server.Security.AccessServicesPermission, Microsoft.Office.Access.Server.Security, Version=14.0.0.0, Culture=neutral, PublicKeyToken=71e9bce111e9429c" version="1.0" Flags="CalculationCallback" />
    </PermissionSet>
    In the <CodeGroup>node, find the following line and change PermissionSetName from “Execution” to “ReportExpressionsDefaultPermissionSet”.
    For further instructions please see Technet Article: "Using Access Services with SQL Reporting Services: Installing SQL Server 2008 R2 Reporting Services Add-In (SharePoint
    Server 2010)".
    Kind regards
    Thanks for the reply, but for the clarification I found my config files in a different location other than stated in A - C:\Program Files\Microsoft SQL Server\MSSQL.3\Reporting Services\ReportServer
    In Step B, the following is unclear to me - In the <CodeGroup>node, find the following line and change PermissionSetName from “Execution” to “ReportExpressionsDefaultPermissionSet”. There are
    MANY Code Group nodes. And in addition to that there are two with PermissionSetName="Execution"; Which one?
    While awaiting your reply I'll go look at the docs and see if they are clearer.
    Thanks!

Maybe you are looking for