Grt release status on backend to SC on SRM
Dear all,
We would like to see the process Release Status of Purchase requisition or Purchase order on backend system R/3 , in the Shopping Cart on SRM side.
Does SRM 5 Support this issue?
Does anybody has implement this case?
Best Regards,
Moshe
Hi
I have seen your requirement. It's some what similar to this problem asked in the thread. Anyways, i paste your requirement here.
once SC is created in SRM system,pr or po will be created in R/3 system.
now client requirment is
1)PR release status has to be updated,
2)untill PR is approved in R/3 SC has to be allowed to change !
3)RFQ and quotation have to be update the status.
4)backend Po release status have to updated
finally price details should not be dispalyed in follow on documents overview as well as detail screen.
Regards,
Mani
<b>From SRM system, the BAPI - BAPI_REQ_CREATE is called in R/3 system which creates the Back-end Purchase Requisition in the R/3 system.</b>
<b>From SRM BAPI - BAPI_PO_CREATE / BAPI_PO_CREATE1 is called in R/3 system which creates the Back-end purchase order in the R/3 system.</b>
<u><b>Similarly, In our case, we need to read the R/3 data into SRM using any of the BAPIs which will bring up the Status and then update the same to the Shopping cart custom field.</b></u>
I am still looking for alternative approaches.
Wl update you soon on this.
Hope this will help.
Please reward suitable points, incase it suits your requirement.
Regards
- Atul
Similar Messages
-
Status of backend PO appears as archived (I1101)
Hi colleagues,
I'm working with SRM5.5 as Add-On on ERP6.0
When I create a SC and release it, it is transfered into the backend and a PO is created. So far so good.
After a while the status of the SC in SRM gets updated and the PO is shown with the correct number as follow-on document. However the status of this PO is archived (I1101). When cross-checking in ME22 and the table EKKO I can see that this PO is not archived at all.
Does anyone have an idea what is going wrong and how can I fix this problem.
As a consequence of this incorrect status it is not possible to create a goods receipt document, the SRM system come up with a message saying 'Document not available. contact the system administrator'.
The strange thing is, that in the development system everything works fine and the status is correct.
Any help or hint would be appriciated.
Kind regards,
ThomasHi Kumar,
thanks for your answer. I checked the number ranges and the synchronization job for BE objects and SRM. It all loooks fine to me.
Maybe there is some special which needs to be setup with an SRM5.5 Add-On installation?
The strange think is, that the PO is created and still in the system. I can find it in table EKKO/EKPO and it can be processed with ME22.
We haven't run an archiving process so far. We does this status come frome? Why does SRM think that the PO has the status I1101?
Kind regards,
Thomas -
Define status for backend purchase order in SRM7.02
Hi,
i am working in SRM 7.02 classic scenario using PI.
When the SC is converted to Backend PO, some PO XML are failed due to various reason. Instead i need to create a PO in held status.
For the same, we have settings 'Define status for Backend purchase order' in SPRO. If we maintain the information in this setting that is enough..??It will work??
1.I heard there is some enhancement need to done for the same to work ...??if it is what is the enhancement ???
2. if it is work, then all PO will be created in Held status or only error PO will be created in Held status?? remaining in released status ???
Kindly advice me ..
ThanksAs far as, BAPI_PO_CREATE1, you need to pass
MEMORY_UNCOMPLETE = abap_true
MEMORY_COMPLETE = abap_false
for POHEADER, pass,
MEMORY = 'X'
MEMORYTYPE = 'H'
for POHEADERX, pass,
MEMORY = 'X'
MEMORYTYPE = 'X'
Though you will be using ESOA for this, this knowledge would help.
Regards,
Ganapathi -
Report for Service Eetry Sheet Release Status
I have created a Service Entry Sheet which has 4 Levels of approval. How will I come to know which level is completed and which one is pending?
Is there any standard report available?Hi,
then create z report
use
ESSR-FRGGR - release group
ESSR-FRGSX - release strategy
ESSR-FRGZU - release status
ESSR-FRGKL - release indicator
ESSR-FRGRL - release not yet completely effected
Regards
Kailas Ugale -
Release status of a function module
Hello,
how can I find out (where) the release status of a function module (if a function module has a status "released for customer")?
regards
zeno- start SE37
- click on the "attribute" tab
- check on the right section in the bottom area
Markus -
Include the Content Released status flag in default WC data control
Hi,
We have integrated custom webcenter portal application with UCM for documents integration. The integration was done using default data control.When we change the document which is getting displayed in the portal from UCM and check it into the system, wokflow gets triggered properly and the content status shows review status. But when we access the document in the portal, at that point of time new document is visible even though the content is still not released from the system.
Can anyone of you let me know how to include the released status of the content in the default data control so that we can avoid this situation
Regards,
BoopathyFirst of all, I think this is more a question to WebCenter Portal, because it is how WebCenter Portal components are written.
Another thing is, that this is probably 'works as designed' and there might be good reasons for that. Since PS3, WebCenter (Portal) exposes some of UCM's functionality, among them ability to approve items in a workflow. This is the reason why it makes a good sense that items are available. Of course, they should be available only to approvers; also unapproved items should not appear if an item is displayed via Content Presenter (compare to a document published on a website via WCM). If you found such a behaviour, please, report it to MetaLink as it might be a bug. -
hi,
im developing PO Smartform.in that i have to display PO release status ie; whether it is released or not released(ME22N----->click on HEADER--
>click on RELEASE STRATEGY).from which tables i can fetch this data .please help.Hi
Take the fields from EKKO that are related to PO release startegy
FRGGR
<b>FRGSX</b>
FRGKE
FRGZU
and check the tables
T16FG
<b>T16FS</b>
T16FB
for the release codes
<b>Reward points for useful Answers</b>
Regards
Anji -
PO release status is not updated.
Dear Expert,
Configuration of PO Release Strategy:
Release Indicator B & R.
Indicator B : Changble field is 4
Indicator R : Changble field is 1 ( Cann't be changed)
Note : For PR , Business case is same , Upon final release users are not allowed to change the PR & PO.
Transaction:
1. PR Creation & Release --- Working fine.
1. PO w.r.t PR Creation & Release --- PO release ( ME29N)status is getting changed from B to R, But release status of PO getting reset from R to B when I am trying to View/Change/cancel Release ME23N/ME22N/ME29N.
When I am using the above said T-Code, there I am seeing that PO is un-release, Though I ahve released the PO.
I am not able to understand why system is behaviing such way.
Help me out to resolve this issue.
Rgds,
ManojHi,
Keep Changeability Indicator BLANK in Indicator B & for Indicator R , you can keep Changeability Indicator 1 ( Cann't be changed) as your business required in configuration of PO Release Strategy:
For Example:
Release Indicator B & R.
Release ID..........Released.........Changeability Indicator.........Description
Indicator B ........{ }..........................{ }......................................Blocked
Indicator R ........................................................................Released
Now try creating PO & then release, sure it will work.
Regards,
Biju K -
How to get informed when PO / Contract changed to ordered / released status
Hi,
I am working on a program which sends SRM PO and Contract data to a non-SAP system, one of the requirements is to send SRM data immediately after PO / Contract's status changed to Ordered / Released ( workflow is used here ).
I tried to used BBP_DOC_CHANGE_BADI, but noticed throuhg debugger that the last time this BADI get called, I still didn't see Ordered / Released status in the Status table.
Is any way to know status change for PO / Contract ?
Thanks a lot,
Wayne LiuHello Wayne,
Solution 1:
You can use the SRM Alert Mangament to know when a contract was released, specifically the following events RELEASED_AGAIN
RELEASED_NEWLY.
Check IMG Cross-Application Basic Settings-> Event and Event Schema for Alert Management
For PO I could not find a similar event, but there is a APPROVAL_PROCESS_DOC_APPROVED event which can be used if the PO was approved after ordering.
In any case you can create your own events and event handlers using the SRM Alert Management BAdi BBP_ALERTING.
Solution 2: Only for Contracts
You can use the existing Distribution mechanism to distribute contracts to Non-SAP systems.
Distribution of contracts is triggered whenever significant changes are done to the Contract (like Release, Lock, Unlock).
Implement function module NOR3_CTR_TRANSFER for this purpose.
Edited by: Sushil Kumar on Mar 22, 2010 9:41 AM -
ME_PROCESS_PO_CUST method PROCESS_HEADER to reset release status of doc
Hi Everyone,
I have read lots of threads regarding the implementation of BAdI ME_PROCESS_PO_CUST. However, I could not find one which fits our requirement which is the resetting/ restart of the release status of a PO whenever a released/approved PO has been changed not only in the quantity field but also in the other details of the document.
I believe that the method to be used in this sense is the PROCESS_HEADER. Would you know any logic which could help me restart an already released PO document whenever any changes have been made to the document?
Kindly send your recommendations.
Thanks and regards,
ReymarHi,
I used this code:
CALL METHOD im_header->get_data
RECEIVING
re_data = lmpoheader.
IF lmpoheader-frgke = 1 AND
lmpoheader-frgzu IS NOT INITIAL.
lmpoheader-frgke = 2.
lmpoheader-frgzu = ''.
CALL METHOD im_header->set_data
EXPORTING
im_data = lmpoheader.
ENDIF.
After saving the PO document, the fields FRGKE and FRGZU were not changed. When I debugged the code, the values of the fields were changed. I just don't know if the last CALL METHOD has been properly executed so that IM_DATA may contain the changed values.
Thank you and regards,
RE
Edited by: Reymar Ellazo on Apr 21, 2009 6:19 PM -
Cash Management : PO release status in Liquidty Forecast Report
Hi,
Can anybody know how to setting :
PO only links to Liquidity Report in TR-CM (FF7B) only if PO has been release completely ?
ThanksHi,
You can the desired report through t/code: ME2L / ME2M , after executing the report go the change layout & select the Release code / release status field. Release staus field will be appear like , if first release is done , the status will come as X or if second release done, the it will come XX. And from release indicator field , you can get the code release code .
Regards,
Raghunath -
Dear All,
How to check a PR is fully released ?
Thanks in advance.Go to ME53, Select the Line item, and click the Flag Icon,
You will have Pop up of Release strategy.
Check release code of "release to date" against the release codes "Final release" they should be same,
Check the Release ID : RFQ/Purchase order is allowed or it comes as Block for Processing.
You can also check the PR Release status through Report MB5A, with required criteria of the check boxes.
Regards
Vikrant -
Settlement of WBS with Partially Released status
Hi colleagues,
We are encountering problems during our settlement to AUC. Although the settlement rule is maintained, the system does not allow us to post the settlement to a WBS with "PREL" (partially released) status. Is this really the standard of the system? When can we release the WBS?
Thank you.Ask your FICO consultants to create a separate Asset class for AUCs.
They can maintain such class in OAOA, where ask them to maintain status of Auc as Investment Measure.
Now you can use this class in OITA - Investment Profile.
And assign this Investment Profile to Project Profile in OPSA.
Assign this Profile to capital project.
Now all your assets which are AUC stage will come to this asset class.
You can create completed asset in the other class by full settlement.
Rewards for helpful answer.
Thanks,
RIYA -
Hi Guys,
I have a requirement where in I need to list out the POs with the Release status based on
date range. Any pointers on this is appreciated.
Thanks.
Rgds,
Senthil GRhi
go to me2n then select the date range and then press shift+F4 (dynamic selection )here in header u can select the release indicator and dates
regards
kunal
award if helpful -
How can we check the release status of Purchase Orders - pending release at different levels
Regards,
ParamDear Param,
Transaction ME2N:
Click the dynamic selection button
Expand "Purchasing document Header" folder
=> Here you can find release group, release strategy,
release status, subject to release field based on your
requirement.
Hope this will help,
ian Wong
Maybe you are looking for
-
After a system reboot, Firefox would not open. I opened the task manager, and saw that Firefox was using alot of memory, and was using 50% of the CPU. I ended the process, and restarted. The situation just repeated several time. I uninstalled Firefox
-
What is the significance of Relationship Owner in JPA?
Hi, We indicate the relationship owner through "mappedBy"? What is the benefit of the Relationship Owner? What are the properties? Thanks, Rajesh
-
X-Fi ExtremeMusic Console doesn´t wo
Hello, Sound and Console work perfectly until the drivers update(software autoupdate from creative official webpage). Since then, sound works, but console show me this message: -In spanish: No hay ning?n dispositivo de audio admitido disponible.Haga
-
Wix Hyperlinks Won't Open in 'Same Page' - iWeb 09
I recently built a flash intro for my personal website (www.justinmiller.info) using Wix. It's basically some photos of me that you can hover over; the photo expands and you can click on it to be directed to one of the pages on my site. I have embedd
-
Default Location For New AS Project
I looked through all of the preferences and see no place to change it. Is it possible? To have it go to my Documents each time is stupid. Thanks Mathias