GTA 4 on windows 7 BOOT camp texture problem, macbook pro 13 january 2011 help .

GTA 4 on windows 7 BOOT camp texture problem, macbook pro 13 january 2011 help .
any
my problem looks like this
http://www.youtube.com/watch?v=PGzgS57THMo
gta 4 steam !

If GTA IV believes the system is under specification even though the computer is powerful enough to run the game with higher settings, the following will fix this problem.
This will work if your problem looks like this: "resource usage 230/60" and you can't change any other setting
Just follow the steps:
Step 1: Create a text file named ‘commandline.txt’ (without the " ")
Step 2: Put the following statement inside it:
i5 users: -availablevidmem 18.0 (with the -)
i7 users: -availablevidmem 22.0 (with the -)
Step 3: Open the main GTAIV folder (C/ program files (86)/ rockstar games/ GTA IV) and copy the commandline.txt file into it.
Step 4: locate the file "GTAIV.exe" (in GTA main folder)
Right click the file and select Properties
Under the shortcut tab, you will see an area that says Target
Modify the Target adding the command line after the last quotation mark (just add the statement you added in commandline.txt)
(remember, i5 users: -availablevidmem 18.0 / i7 users: -availablevidmem 22.0)
It should look something like this:
Make sure to add space between " and -"
I hope This helps, although late cx

Similar Messages

  • Boot camp process. MacBook Pro cannot fid a bootable disk?

    boot camp process. MacBook Pro cannot fid a bootable disk?

    Welcome to the Apple Support Communities
    Press Option key while your Mac is starting and choose your Windows installation disc or drive to start the installation

  • HT3986 i can not install windows 7 with boot camp on my macbook pro 17-inch eairly 2011

    I have been trying to install windows 7 on my MacBook pro 17inch 2011, once i get to the step "burn a copy to a cd or DVD" the system runs and burns the information to the DVD but when the next step appears after I create the partition the program dose not recognize the DVD I created. when i save the copy to an external hard drive that is MS-DOS (FAT) formatted the same thing happens, the system just does not recognize the saved file. I have updated my computer and tired to check if I have any updates for the boot camp were available my current version is 4.0.1 (429). if there is anyone out there who can help, please do. 

    1st, you read the full guide, and you understand that you need to supply your own copy of Windows 7 (Home Premium preferably 64-bit).

  • How to install boot camp on my macbook pro?

    How to install boot camp on my macboo pro 15-inch early 20011?

    Boot Camp instructions are located here: http://www.apple.com/support/bootcamp/

  • I have a problem with boot camp and maybe macbook pro?

    I am having issues with boot camp here is what I did.
    I attempted to partition for windows then this message popped up after 2 minutes:
    Verification failed. this disk could not be partitioned.
    Use Disk Utility to repair this disk.
    so I used the disk utility to repair the problem then this message came:
    First Aid failed
    Disk Utility stopped verifying “Macintosh HD” because the following error was encountered:
    The underlying task reported failure on exit
    Verifying volume “Macintosh HD”
    Checking HFS Plus volume.
    Checking Extents Overflow file.
    Checking Catalog file.
    Incorrect block count for file Temp File
    (It should be 13 instead of 0)
    Checking multi-linked files.
    Checking Catalog hierarchy.
    Checking Extended Attributes file.
    Checking volume bitmap.
    Checking volume bitmap.
    pair",0)
    Checking volume information.
    Invalid volume free block count
    (It should be 23087569 instead of 23087570)
    The volume Macintosh HD needs to be repaired.
    Error: The underlying task reported failure on exit
    1 HFS volume checked
    Volume needs repair
    So let me explain something. I just got the macbook pro put some music on it and pictures. so what do I do to fix this problem? please let me know.

    Repairing the Hard Drive and Permissions
    Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Installer menu (Utilities menu for Tiger.) After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer. Now shutdown the computer for a couple of minutes and then restart normally.
    If DU reports errors it cannot fix, then you will need Disk Warrior (4.0 for Tiger) and/or TechTool Pro (4.5.2 for Tiger) to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
    If you are unable to repair the drive then you will need to reformat the drive using Disk Utility. Of course this will erase all your files so have a backup before you start.
    Basic Backup
    Get an external Firewire drive at least equal in size to the internal hard drive and make (and maintain) a bootable clone/backup. You can make a bootable clone using the Restore option of Disk Utility. You can also make and maintain clones with good backup software. My personal recommendations are (order is not significant):
    1. Retrospect Desktop (Commercial - not yet universal binary)
    2. Synchronize! Pro X (Commercial)
    3. Synk (Backup, Standard, or Pro)
    4. Deja Vu (Shareware)
    5. PsynchX 2.1.1 and RsyncX 2.1 (Freeware)
    6. Carbon Copy Cloner (Freeware - 3.0 is a Universal Binary)
    7. SuperDuper! (Commercial)
    The following utilities can also be used for backup, but cannot create bootable clones:
    1. Backup (requires a .Mac account with Apple both to get the software and to use it.)
    2. Toast
    3. Impression
    4. arRSync
    Apple's Backup is a full backup tool capable of also backing up across multiple media such as CD/DVD. However, it cannot create bootable backups. It is primarily an "archiving" utility as are the other two.
    Impression and Toast are disk image based backups, only. Particularly useful if you need to backup to CD/DVD across multiple media.
    Visit The XLab FAQs and read the FAQs on maintenance, optimization, virus protection, and backup and restore. Also read How to Back Up and Restore Your Files.

  • I'm not able to load windows 8.1 with boot camp on new MacBook Pro retina with on the new mavericks 10.9. If anybody can help? thanks. Michel

    I already spent half a day in order to load windows 8.1 on my new Macbookpro Retina without success. Boot camp not reconize the USD drive with windows 8.1. Is anybody able to help me?

    I already spent half a day in order to load windows 8.1 on my new Macbookpro Retina without success. Boot camp not reconize the USD drive with windows 8.1. Is anybody able to help me?

  • Airport extreme, audio won't work on windows 7 boot camp for my macbook pro osx lion

    Bought my Macbookpro in late 2011 and osx lion, decided to put boot camp on it, but it won't find my airport exrteme or even if i connect the ethernet cord directly into the laptop it still wont conectto the internet, and my audio also doesn't work, even when i plug in headphones, any suggestions?

    Sorry for the late reply, I've searched as much as I could all having similar issues but not quite being the same issue. I've tried manually putting in my airport extreme information, search for other connections, start a new connection, all have not worked. I did everything normally to setup windows except put in the authentication code which i have misplaced.
    I might've already added the drivers but im not too sure, how would you add the driver, just in case i missed that part

  • How to install Boot Camp on a MacBook Pro 2011

    Well I bought a new MacBook Pro and I have constantly been trying to install Boot Camp.
    When I open Boot Camp it shows me the Introduction, then it asks me if I would like to install the Lastest Windows Supports Software From Apple, and if I would like to Install Windows 7. I tick both boxes and then another page opens.
    It asks me if I would like to install it to a DVD or CD, or if I would like to install it to an external hard drive. Now, I have tried both of these, and they both show a page asking me how much space I would like to be Mac space, and Windows space. After I've chosen how much I would like, I click install. After about 30 seconds, a message pops up saying the installer disk could not be found, please insert the installer disk and wait a few seconds, and the click install again.
    I have done this many times, and that same message pops up. Please, if any of you people out there have the solution for me it would be gratefully apreciated.
    Thanks.

    No, it doesn't. You have to purchase the Windows 7 installer. Windows is not included with the computer. Did you discuss the matter with someone when you bought your computer? If you did they should have told you that you would need to buy Windows 7. If you had asked while you were purchasing the computer then you could have paid for Windows at the time and had it installed for you.

  • Installing boot camp in a macbook pro with retina

    Hello today i tried installing windows in my macbook pro with retina but it doesnt seem to install the drivers correctly.. i couldnt connect to the internet in windows so i looked and these drivers werent installed
    Network Controller - Wireless
    PCI Simple Communication Controller
    SM Bus Controller
    High Definition Audio
    Apple Keyboard -> Bluetooth USB Host Controller (though the USB ports are active and operational)
    Facetime HD Camera (1 of 2 not working)
    Also the nvidia grafics werent installed so i couldnt play any games and the whole purpose i want to install windows is for some games and solid works...
    I appriciate any help i can get
    Thanks

    Sounds like you did not download and then install the Windows support/driver software. It is one of the first items in the Boot Camp menu when you start Boot Camp Assistant.

  • Graphic card problem, macbook pro late 2011

    My macbook pro screen just started flickering for a few seconds every time i start it up since i plugged a mini display to hdmi to it. Could this be related to the hdmi cable or tv i used? Should i be worried since it only flickers for a few seconds a startup?

    Thanks Andy, but I am in Ireland. So don´t know if the laws in UK would help. But seems like the only option I have now is to rball the Graphic Chip.
    Has any of u guys in the club taken action against Apple?

  • I removed boot camp from my macbook pro and when it restarted it went to disk utility and will not let me restore or set up a new osx , how can i get the macbook to install from the disk i have

    i have tried every possible way in os x utlility to restore or reload from my disk or backup and it will not allow me to do it. I have the original disk with 10.6 but i cant install from it. Please any help would be great as i have a 1200 paper weight

    On the advice of a friend I installed and ran a program on my MacBook called 'IPSecuritas'. This has stopped my wireless network from appearing and disappearing, but I still can't connect. Would really appreciate some help with this.

  • I have a copy of Windows 7, and I am trying to bring up Boot Camp on my MacBook with Snow Leopard.

    I have a copy of Windows 7, and I am trying to bring up Boot Camp on my MacBook with Snow Leopard. But my Snow Leopard install disk is too old for Windows 7, so attempted Boot Camp install of drivers fails.
    I have hand-installed the NVidia graphics driver, and I have keyboard, minimal trackpad, and hardwire to internet all working. So the WIndows machine is usable. But I am hurting for wi-fi, better trackpad, and whatever else is delivered by Boot Camp. I can't use any of the Boot Camp upgrades because I do not have XP or Vista.

    Dear Nathan,
    Many thanks. To the best of my memory, that is how I got where I am today. Initially I had one failed setup, then discovered compatibility mode and ran using it.  The result was not an obvious failure, but something was not there because not only were some drivers missing (wi-fi, trackpad, ...) but (much to my disappointment) the 3.1 update would not run. It complained that 3.0 wasn't there. If I hardwired to my home network, the machine would do almost everything I wanted, but the graphics were slow and clumsy. That is when I hunted around for the NVidia driver and downloaded it from NVidia. And that is where I stand now.
    My son found this link http://www.simplehelp.net/2009/01/15/using-boot-camp-to-install-windows-7-on-you r-mac-the-complete-walkthrough/
    which has instructions claiming to do the install straight to Win 7 without using compatibility mode.
    Given that my clumsy efforts to patch things up have probably necessitated a Win 7 deinstall and reinstall to test either your plan or the one my son found, I am inclined to sit tight for a couple of days to see  how much I can learn.
    I appreciate your interest in  this problem, and if you are up for reading the process at the link my son found and commenting, I would be grateful.
    In any case, many thanks, Paul

  • How do I remove the old windows boot camp partition which is now useless on my new Macbook pro

    I had boot camped windows Vista to my old Macbook Pro 2009.
    When I bought a new Macbook Pro Retina Late 2013, I restored from my Time Machine backup. It never put Windows Vista on as there was compatability issues.
    I recently tried to partition in Boot Camp to install Windows 8 so that I can use a particular program for work. The "ghost" partition is still there and I can't see an option to make the HD as one again. Boot Camp wants me to format the HD as single and journaled which I understand but if I restore from my backup it puts the "ghost" partition back in. 6 hours of waiting to find that out!
    Any ideas?
    Thanks

    Thanks for responding.
    Boot Camp shows my HD as a rectangle when I go to the "partition" tab but nearly half of it is white. Is this the free space?
    The error message I got was:-
    The disk cannot be partitioned because some of the files could not be moved.
    Back up the disk and use Disk Utility to format it as a single Mac OS extended (journaled) volume. Restore your information to the disk and try using Boot Camp assistant again.
    I was only making a small partition, so it couldn't have been too big.
    There is no evidence of any Windows installation or a physical partition but it must be there to get that message. Is that correct?
    I can't see an option to format my whole HD but even if there was, the problem would reappear when restored from TMachine.
    UPDATE:
    just tried to make the white area on my HD into a new partition and then erase it.
    I'm trying Boot Camp again to see if that has worked. It just takes about 2 hours to get to the problem stage again!!

  • I have a copy of Windows 7, and I am trying to bring up Boot Camp on my MacBook with Snow Leopard. But my Snow Leopard install disk is too old for Windows 7, so attempted Boot Camp install of drivers fails.

    I have a copy of Windows 7, and I am trying to bring up Boot Camp on my MacBook with Snow Leopard. But my Snow Leopard install disk is too old for Windows 7, so attempted Boot Camp install of drivers fails.
    I have hand-installed the NVidia graphics driver, and I have keyboard, minimal trackpad, and hardwire to internet all working. So the WIndows machine is usable. But I am hurting for wi-fi, better trackpad, and whatever else is delivered by Boot Camp. I can't use any of the Boot Camp upgrades because I do not have XP or Vista.

    While we all have MacBooks in this forum not all of us use Boot Camp. There's a Boot Camp Support Community where everybody uses Boot Camp. You should also post this question there.
    https://discussions.apple.com/community/windows_software/boot_camp

  • Cannot install Windows XP Professional on my MacBook Pro using Boot Camp.

    Cannot install Windows XP Professional on my MacBook Pro using Boot Camp. When I get to the point of inserting the Windows disc and clicking 'Install' at the Boot Camp Assistant screen, it keeps telling me that it cannot find the Install Disc. The installation disc I am using is a new full install disc. I have tried to do the same thing using a Windows 7 disc with the same results. Does anyone have any answers. I am getting desperate!

    saturnotaku wrote:
    Csound1 wrote:
    Windows XP is not supported, install Windows 7 or 8.
    Reading the entire post is your friend:
    I have tried to do the same thing using a Windows 7 disc with the same results.
    Perhaps you could offer a suggestion then.

Maybe you are looking for