GUI_UPLOAD Throws dp_out_of_memory
Hi togehter,
while i'm trying to upload an huge txt file with the method cl_gui_frontend_services=>gui_upload
i'm getting an errorcode back with 14: dp_out_of_memory.
Curiosly sometimes it works. Can somebody please explain this?
Thansk and regards
Philip
Ask ur basis team to increase TIMEOUT period as well as Dynamic Memory parameter.
Similar Messages
-
"Cannot interpret data in file" error while using GUI_UPLOAD for .xls file
Hi,
I have made a program using FM GUI_UPLOAD to upload an .xls file to an internal table. But upon executing ,it gives error "Cannot Interpret data in file". I have seen in other posts people talking about GUI_UPLOAD FM to upload data from excel directly into internal table. Kindly help.
Here is my code. I had tried using different combination for HAS_FIELD_SEPARATOR but still its not working.
In my emp1.xls file , the data in each column is present in the same order as in the internal table. Although the first column in my internal table is NUMC. I dont know if that is causing the problem.
REPORT ZUPLOAD_1.
data: itab TYPE TABLE OF zempl_master WITH HEADER LINE.
CALL FUNCTION 'GUI_UPLOAD'
EXPORTING
FILENAME = 'C:\empl1.xls'
FILETYPE = 'ASC'
HAS_FIELD_SEPARATOR = 'X'
* HEADER_LENGTH = 0
* READ_BY_LINE = 'X'
* DAT_MODE = ' '
* CODEPAGE = ' '
* IGNORE_CERR = ABAP_TRUE
* REPLACEMENT = '#'
* CHECK_BOM = ' '
* VIRUS_SCAN_PROFILE =
* NO_AUTH_CHECK = ' '
* IMPORTING
* FILELENGTH =
* HEADER =
TABLES
DATA_TAB = itab.
* EXCEPTIONS
* FILE_OPEN_ERROR = 1
* FILE_READ_ERROR = 2
* NO_BATCH = 3
* GUI_REFUSE_FILETRANSFER = 4
* INVALID_TYPE = 5
* NO_AUTHORITY = 6
* UNKNOWN_ERROR = 7
* BAD_DATA_FORMAT = 8
* HEADER_NOT_ALLOWED = 9
* SEPARATOR_NOT_ALLOWED = 10
* HEADER_TOO_LONG = 11
* UNKNOWN_DP_ERROR = 12
* ACCESS_DENIED = 13
* DP_OUT_OF_MEMORY = 14
* DISK_FULL = 15
* DP_TIMEOUT = 16
* OTHERS = 17
IF SY-SUBRC <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
LOOP at itab.
write:/ itab-emp_no,itab-name.
endloop.hi amber22 you need to use the below fm to upload an xls file
FORM EXCEL_UPLOAD .
CALL FUNCTION 'ALSM_EXCEL_TO_INTERNAL_TABLE'
EXPORTING
FILENAME = FILENAM
I_BEGIN_COL = 1
I_BEGIN_ROW = 1
I_END_COL = 6
I_END_ROW = 100
TABLES
INTERN = xl_itab.
* EXCEPTIONS
* INCONSISTENT_PARAMETERS = 1
* UPLOAD_OLE = 2
* OTHERS = 3 .
IF SY-SUBRC = 0.
MESSAGE 'DATA UPLOADED SUCCESSFULLY' TYPE 'I'.
ENDIF.
ENDFORM. " EXCEL_UPLOAD -
Error while using the function module GUI_UPLOAD
Hi,
My requirement is to upload the data from .txt file into internal table.
I have given my code like this
PARAMETERS: p_fname LIKE rlgrap-filename.
data: begin of gt_string occurs 0,
record type char255,
end of gt_string.
AT SELECTION-SCREEN ON VALUE-REQUEST for p_fname.
CALL FUNCTION 'KD_GET_FILENAME_ON_F4'
EXPORTING
PROGRAM_NAME = SYST-REPID
DYNPRO_NUMBER = SYST-DYNNR
FIELD_NAME = ' '
STATIC = 'X'
MASK = ' '
CHANGING
file_name = p_fname
EXCEPTIONS
MASK_TOO_LONG = 1
OTHERS = 2
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
CALL FUNCTION 'GUI_UPLOAD'
EXPORTING
filename = p_fname
FILETYPE = 'ASC'
HAS_FIELD_SEPARATOR = 'X'
HEADER_LENGTH = 0
READ_BY_LINE = 'X'
DAT_MODE = ' '
CODEPAGE = ' '
IGNORE_CERR = ABAP_TRUE
REPLACEMENT = '#'
CHECK_BOM = ' '
NO_AUTH_CHECK = ' '
IMPORTING
FILELENGTH =
HEADER =
tables
data_tab = gt_string
EXCEPTIONS
FILE_OPEN_ERROR = 1
FILE_READ_ERROR = 2
NO_BATCH = 3
GUI_REFUSE_FILETRANSFER = 4
INVALID_TYPE = 5
NO_AUTHORITY = 6
UNKNOWN_ERROR = 7
BAD_DATA_FORMAT = 8
HEADER_NOT_ALLOWED = 9
SEPARATOR_NOT_ALLOWED = 10
HEADER_TOO_LONG = 11
UNKNOWN_DP_ERROR = 12
ACCESS_DENIED = 13
DP_OUT_OF_MEMORY = 14
DISK_FULL = 15
DP_TIMEOUT = 16
OTHERS = 17
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
Here I am getting dump error as 'Type conflict when calling a function module.
The function module interface allows you to specify only fields
of a particular type under "FILENAME". The field "P_FNAME" specified here has a different field type'.
What would be the reason for this error?
Can anyone help me?
Regards,
Hemasee this sample program for F4 help
*& Report ZSD_EXCEL_INT_APP
REPORT ZSD_EXCEL_INT_APP.
parameter: file_nm type localfile.
types : begin of it_tab1,
f1(20),
f2(40),
f3(20),
end of it_tab1.
data : it_tab type table of ALSMEX_TABLINE with header line,
file type rlgrap-filename.
data : it_tab2 type it_tab1 occurs 1,
wa_tab2 type it_tab1,
w_message(100) TYPE c.
at selection-screen on value-request for file_nm.
CALL FUNCTION 'KD_GET_FILENAME_ON_F4'
EXPORTING
PROGRAM_NAME = SYST-REPID
DYNPRO_NUMBER = SYST-DYNNR
FIELD_NAME = ' '
STATIC = 'X'
MASK = ' '
CHANGING
file_name = file_nm
EXCEPTIONS
MASK_TOO_LONG = 1
OTHERS = 2
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
start-of-selection.
refresh it_tab2[].clear wa_tab2.
file = file_nm.
CALL FUNCTION 'ALSM_EXCEL_TO_INTERNAL_TABLE'
EXPORTING
filename = file
i_begin_col = '1'
i_begin_row = '1'
i_end_col = '10'
i_end_row = '35'
tables
intern = it_tab
EXCEPTIONS
INCONSISTENT_PARAMETERS = 1
UPLOAD_OLE = 2
OTHERS = 3
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
loop at it_tab.
case it_tab-col.
when '002'.
wa_tab2-f1 = it_tab-value.
when '004'.
wa_tab2-f2 = it_tab-value.
when '008'.
wa_tab2-f3 = it_tab-value.
endcase.
at end of row.
append wa_tab2 to it_tab2.
clear wa_tab2.
endat.
endloop.
data : p_file TYPE rlgrap-filename value 'TEST3.txt'.
OPEN DATASET p_file FOR OUTPUT IN TEXT MODE ENCODING DEFAULT.
*--- Display error messages if any.
IF sy-subrc NE 0.
MESSAGE e001(zsd_mes).
EXIT.
ELSE.
*---Data is downloaded to the application server file path
LOOP AT it_tab2 INTO wa_tab2.
TRANSFER wa_tab2 TO p_file.
ENDLOOP.
ENDIF.
*--Close the Application server file (Mandatory).
CLOSE DATASET p_file.
loop at it_tab2 into wa_tab2.
write : / wa_tab2-f1,wa_tab2-f2,wa_tab2-f3.
endloop. -
Problem with GUI_UPLOAD using excel sheet
Hi,
I am trying to upload excel sheet thru GUI_UPLOAD ... this excel sheet has a header line and 3 line of data. Even if I remove the header line then also the internal while debugging is showing 28 lines of entries with "#" "squares" in some columns ... while in others where data should be there shows all Zeros....
The excel sheet has the following info
Rate Type Valid From Date From Currency To Currency Indirect Quote Direct Quote
M 29.09.2006 SGD USD 1.6932
M 29.09.2006 USD SGD 1.6932
M 29.09.2006 SGD MYR 2.19653
KURST GDATU FCURR TCURR INUKURS DUKURS
###ࡱ |########|#####|### #| 0.00000 |0.00000 |
##29 |00000000| | | 0.00000 |0.00000 |
o#d# |00000000| | | 0.00000 |0.00000 |
The code that I am writing is as follows:-
*& INTERNAL TABLES
DATA : BEGIN OF T_INPUT occurs 0,
KURST LIKE TCURV-KURST, " Exchange rate type
GDATU LIKE SY-DATUM, " Date from which rate is effective
FCURR LIKE TCURC-WAERS, " From currency
TCURR LIKE TCURC-WAERS, " To currency
INUKURS LIKE TCURR-UKURS, " Indirect Quote
DUKURS LIKE TCURR-UKURS, " Direct Quote
END OF T_INPUT.
S T A R T - O F - S E L E C T I O N *
START-OF-SELECTION.
Perform to upload the excel file.
PERFORM UPLOAD_EXCEL_FILE.
FORM UPLOAD_EXCEL_FILE .
DATA: L_FILENM TYPE STRING.
L_FILENM = P_FILENM.
CALL FUNCTION 'GUI_UPLOAD'
EXPORTING
FILENAME = L_FILENM
FILETYPE = 'ASC'
HAS_FIELD_SEPARATOR = 'X'
HEADER_LENGTH = 0
READ_BY_LINE = 'X'
DAT_MODE = ' '
CODEPAGE = ' '
IGNORE_CERR = ABAP_TRUE
REPLACEMENT = '#'
CHECK_BOM = ' '
IMPORTING
FILELENGTH =
HEADER =
TABLES
DATA_TAB = T_INPUT
EXCEPTIONS
FILE_OPEN_ERROR = 1
FILE_READ_ERROR = 2
NO_BATCH = 3
GUI_REFUSE_FILETRANSFER = 4
INVALID_TYPE = 5
NO_AUTHORITY = 6
UNKNOWN_ERROR = 7
BAD_DATA_FORMAT = 8
HEADER_NOT_ALLOWED = 9
SEPARATOR_NOT_ALLOWED = 10
HEADER_TOO_LONG = 11
UNKNOWN_DP_ERROR = 12
ACCESS_DENIED = 13
DP_OUT_OF_MEMORY = 14
DISK_FULL = 15
DP_TIMEOUT = 16
OTHERS = 17 .
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.Hi SB,
pls change the data type declared for 'valid from date'
from
DATA : BEGIN OF T_INPUT occurs 0,
KURST LIKE TCURV-KURST, " Exchange rate type
<b>GDATU LIKE SY-DATUM,</b> " Date from which rate is effective
FCURR LIKE TCURC-WAERS, " From currency
TCURR LIKE TCURC-WAERS, " To currency
INUKURS LIKE TCURR-UKURS, " Indirect Quote
DUKURS LIKE TCURR-UKURS, " Direct Quote
END OF T_INPUT.
to
DATA : BEGIN OF T_INPUT occurs 0,
KURST LIKE TCURV-KURST, " Exchange rate type
GDATU(10) type c, " Date from which rate is effective
FCURR LIKE TCURC-WAERS, " From currency
TCURR LIKE TCURC-WAERS, " To currency
INUKURS LIKE TCURR-UKURS, " Indirect Quote
DUKURS LIKE TCURR-UKURS, " Direct Quote
END OF T_INPUT.
Cheers,
Vikram
Please reward for helpful replies!! -
Runtime error while using GUI_UPLOAD
Hi All,
I have a text file which contains few records delimited by tab.
I am trying to upload the contents of the file into an internal table using the FM GUI_UPLOAD
But, I am getting run time error 'Type conflict when calling a function module'.
The code that I had written is shown below.
Please let me know where I went wrong.
REPORT Z84364BDC .
TYPES : BEGIN OF ITAB_TP,
MATNR TYPE MARA-MATNR,
EAN11 TYPE MARA-EAN11,
END OF ITAB_TP.
DATA : FILE_ITAB TYPE STANDARD TABLE OF ITAB_TP.
DATA : ITAB_WA TYPE ITAB_TP.
SELECTION-SCREEN BEGIN OF BLOCK B1 WITH FRAME TITLE TEXT-T01.
PARAMETERS : P_FILE TYPE RLGRAP-FILENAME DEFAULT 'D:\Example.txt'.
SELECTION-SCREEN END OF BLOCK B1.
***FILLING THE INTERNAL TABLE****
CALL FUNCTION 'GUI_UPLOAD'
EXPORTING
filename = P_FILE
FILETYPE = 'ASC'
has_field_separator = ','
tables
data_tab = FILE_ITAB
EXCEPTIONS
FILE_OPEN_ERROR = 1
FILE_READ_ERROR = 2
NO_BATCH = 3
GUI_REFUSE_FILETRANSFER = 4
INVALID_TYPE = 5
NO_AUTHORITY = 6
UNKNOWN_ERROR = 7
BAD_DATA_FORMAT = 8
HEADER_NOT_ALLOWED = 9
SEPARATOR_NOT_ALLOWED = 10
HEADER_TOO_LONG = 11
UNKNOWN_DP_ERROR = 12
ACCESS_DENIED = 13
DP_OUT_OF_MEMORY = 14
DISK_FULL = 15
DP_TIMEOUT = 16
OTHERS = 17
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.The file is delimited by Comma field as mentioned above.
Below is the code that I had written. But, I face the same problem
REPORT Z84364BDC .
TYPES : BEGIN OF ITAB_TP,
MATNR TYPE MARA-MATNR,
EAN11 TYPE MARA-EAN11,
END OF ITAB_TP.
DATA : FILE_ITAB TYPE STANDARD TABLE OF ITAB_TP.
DATA : ITAB_WA TYPE ITAB_TP.
SELECTION-SCREEN BEGIN OF BLOCK B1 WITH FRAME TITLE TEXT-T01.
PARAMETERS : P_PATH TYPE RLGRAP-FILENAME DEFAULT 'D:\Example.txt'.
SELECTION-SCREEN END OF BLOCK B1.
DATA : P_FILE TYPE STRING.
P_FILE = P_PATH.
****FILLING THE INTERNAL TABLE*****
CALL FUNCTION 'GUI_UPLOAD'
EXPORTING
filename = P_FILE
FILETYPE = 'ASC'
has_field_separator = 'X'
tables
data_tab = FILE_ITAB
EXCEPTIONS
FILE_OPEN_ERROR = 1
FILE_READ_ERROR = 2
NO_BATCH = 3
GUI_REFUSE_FILETRANSFER = 4
INVALID_TYPE = 5
NO_AUTHORITY = 6
UNKNOWN_ERROR = 7
BAD_DATA_FORMAT = 8
HEADER_NOT_ALLOWED = 9
SEPARATOR_NOT_ALLOWED = 10
HEADER_TOO_LONG = 11
UNKNOWN_DP_ERROR = 12
ACCESS_DENIED = 13
DP_OUT_OF_MEMORY = 14
DISK_FULL = 15
DP_TIMEOUT = 16
OTHERS = 17
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
***Displaying the Material*****
LOOP AT FILE_ITAB INTO ITAB_WA.
WRITE:/ ITAB_WA-MATNR.
ENDLOOP. -
hi guru,
iam doing some bdc program.. but ity will going to dump on gui_upload.. so plz help me.
An exception occurred that is explained in detail
The exception, which is assigned to class 'CX_SY_DYN_CALL_ILLEGAL_TYPE', was
not caught in.
procedure "F_UPLOAD_FILE" "(FORM)", nor was it propagated by a RAISING clause.
Since the caller of the procedure could not have anticipated that the
exception would occur, the current program is terminated.
The reason for the exception is:
The call to the function module "GUI_UPLOAD" is incorrect:
The function module interface allows you to specify only
fields of a particular type under "FILENAME".
The field "P_P_FILE" specified here is a different
field type
SELECTION-SCREEN : BEGIN OF BLOCK b1 WITH FRAME TITLE text-h01.
PARAMETERS: p_file LIKE rlgra-filename
SELECTION-SCREEN : END OF BLOCK b1. .----
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_file.
PERFORM f_get_file USING p_file.
CALL FUNCTION 'KD_GET_FILENAME_ON_F4'
*EXPORTING-
CHANGING
FILE_NAME = p_p_file
endform.
form f_upload_file using p_p_file.
CALL FUNCTION 'GUI_UPLOAD'
EXPORTING
FILENAME = p_p_file
FILETYPE = 'DAT'
endform.Hi,
Refer the program given below. it is working fine for me.
make the paramerter as:
pa_dfile TYPE rcgfiletr-ftfront.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR pa_dfile.
CALL FUNCTION 'KD_GET_FILENAME_ON_F4'
EXPORTING
static = 'X'
mask = '(Text file|*.TXT'
CHANGING
file_name = pa_dfile
EXCEPTIONS
mask_too_long = 1
OTHERS = 2.
IF sy-subrc <> 0.
MESSAGE ID 'PG' TYPE 'E' NUMBER '016'
WITH 'Error in F4 help'(005).
"The provided file is not an excel sheet.
RETURN.
ENDIF.
DATA: lv_filetype(10) TYPE c,
lv_gui_sep TYPE c,
lv_file_name TYPE string.
lv_filetype = 'ASC'.
lv_gui_sep = 'X'.
lv_file_name = pa_dfile.
FM call to upload file
CALL FUNCTION 'GUI_UPLOAD'
EXPORTING
filename = lv_file_name
filetype = lv_filetype
has_field_separator = lv_gui_sep
TABLES
data_tab = gi_table
EXCEPTIONS
file_open_error = 1
file_read_error = 2
no_batch = 3
gui_refuse_filetransfer = 4
invalid_type = 5
no_authority = 6
unknown_error = 7
bad_data_format = 8
header_not_allowed = 9
separator_not_allowed = 10
header_too_long = 11
unknown_dp_error = 12
access_denied = 13
dp_out_of_memory = 14
disk_full = 15
dp_timeout = 16
OTHERS = 17.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
Hope it helps.
Regards
Rajesh Kumar
Edited by: Rajesh Kumar on Jul 24, 2009 7:11 AM -
Issue with field separator in GUI_UPLOAD
Hello Gurus
I am facing issue with gui_upload. I have a text file in which the fields are eparated by single Pipe i.e |. Now when I try to read the data from file in internal table even with using field separator it does not insert data in proper fields.
DATA: BEGIN OF IT_TAB OCCURS 0,
OBJECT_ID type string,
VERSION_SERIES_ID TYPE string,
VERSION_NUMBER TYPE string,
REVISION TYPE string,
DOC_NUMBER TYPE string,
DOCTITLE TYPE string,
FILESIZE TYPE string,
MIME_TYPE TYPE string,
PLANTUNIT TYPE string,
END OF IT_TAB.
CALL FUNCTION 'GUI_UPLOAD'
EXPORTING
FILENAME = w_mpath
FILETYPE = 'ASC'
HAS_FIELD_SEPARATOR = '|'
HEADER_LENGTH = 0
READ_BY_LINE = 'X'
DAT_MODE = ' '
CODEPAGE = ' '
IGNORE_CERR = ABAP_TRUE
REPLACEMENT = '#'
CHECK_BOM = ' '
VIRUS_SCAN_PROFILE =
NO_AUTH_CHECK = ' '
IMPORTING
FILELENGTH =
HEADER =
TABLES
DATA_TAB = it_tab[]
EXCEPTIONS
FILE_OPEN_ERROR = 1
FILE_READ_ERROR = 2
NO_BATCH = 3
GUI_REFUSE_FILETRANSFER = 4
INVALID_TYPE = 5
NO_AUTHORITY = 6
UNKNOWN_ERROR = 7
BAD_DATA_FORMAT = 8
HEADER_NOT_ALLOWED = 9
SEPARATOR_NOT_ALLOWED = 10
HEADER_TOO_LONG = 11
UNKNOWN_DP_ERROR = 12
ACCESS_DENIED = 13
DP_OUT_OF_MEMORY = 14
DISK_FULL = 15
DP_TIMEOUT = 16
OTHERS = 17
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
I want the data to get appended in internal table based on | separator.
Please help.
Regards,
Rajesh.Hi,
I believe the field separator parameter will work for Excel files..You have to get the internal table in a string format..and then use split statement..
check this example..
DATA: BEGIN OF it_tab OCCURS 0,
object_id TYPE string,
version_series_id TYPE string,
version_number TYPE string,
revision TYPE string,
doc_number TYPE string,
doctitle TYPE string,
filesize TYPE string,
mime_type TYPE string,
plantunit TYPE string,
END OF it_tab.
DATA: t_tab TYPE TABLE OF string,
v_string TYPE string.
CALL FUNCTION 'GUI_UPLOAD'
EXPORTING
filename = 'C:\TEST.TXT'
* has_field_separator = '|' "Actually not required.
TABLES
data_tab = t_tab
EXCEPTIONS
file_open_error = 1
file_read_error = 2
no_batch = 3
gui_refuse_filetransfer = 4
invalid_type = 5
no_authority = 6
unknown_error = 7
bad_data_format = 8
header_not_allowed = 9
separator_not_allowed = 10
header_too_long = 11
unknown_dp_error = 12
access_denied = 13
dp_out_of_memory = 14
disk_full = 15
dp_timeout = 16
OTHERS = 17.
IF sy-subrc <> 0.
ENDIF.
LOOP AT t_tab INTO v_string.
SPLIT v_string AT ','
INTO
it_tab-object_id
it_tab-version_series_id
it_tab-version_number
it_tab-revision
it_tab-doc_number
it_tab-doctitle
it_tab-filesize
it_tab-mime_type
it_tab-plantunit.
APPEND it_tab.
CLEAR: it_tab.
ENDLOOP.
Thanks
Naren
Edited by: Narendran Muthukumaran on Oct 15, 2008 4:58 PM -
GUI_Upload & GUI_Download for excel files
Hi experts,
I want to upload excel file into sap. i am trying with GUI_Upload function module. when i see the data it is filled with # and other special char. When i save the excel file as .txt file and then read the txt file. Now i am getting correct data. Is it possible to read Excel data using GUI_UPLOAD directly without changing .xls to .txt.
Also, how to change data in second or third tab of excel file using GUI_Download.
-RKHi
Actually ur file selection s wrong.
CALL FUNCTION 'KD_GET_FILENAME_ON_F4'
EXPORTING
PROGRAM_NAME = SYST-REPID
DYNPRO_NUMBER = SYST-DYNNR
FIELD_NAME = 'P_FNAME'
STATIC = 'X'
MASK = '*.txt'
CHANGING
FILE_NAME = P_FNAME
EXCEPTIONS
MASK_TOO_LONG = 1
OTHERS = 2.
Upload:
CALL FUNCTION 'GUI_UPLOAD'
EXPORTING
FILENAME = LV_FNAME
FILETYPE = 'ASC'
HAS_FIELD_SEPARATOR = 'X'
TABLES
DATA_TAB = IT_UEXBANK01
EXCEPTIONS
FILE_OPEN_ERROR = 1
FILE_READ_ERROR = 2
NO_BATCH = 3
GUI_REFUSE_FILETRANSFER = 4
INVALID_TYPE = 5
NO_AUTHORITY = 6
UNKNOWN_ERROR = 7
BAD_DATA_FORMAT = 8
HEADER_NOT_ALLOWED = 9
SEPARATOR_NOT_ALLOWED = 10
HEADER_TOO_LONG = 11
UNKNOWN_DP_ERROR = 12
ACCESS_DENIED = 13
DP_OUT_OF_MEMORY = 14
DISK_FULL = 15
DP_TIMEOUT = 16
OTHERS = 17.
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF. -
Field Separator in GUI_UPLOAD
Hi,
I need to upload a tab delimited excel file . I am using FM GUI_DOWNLOAD.What are Filetype and Field Separator.
Regards,
DivyanshuHi Divyanshu,
It may be better to use the class method to future proof your development (which incidentally calls GUI_UPLOAD anyway). Consider the following code:
data: i_file type standard table of t_file.
call method cl_gui_frontend_services=>gui_upload
exporting
filename = w_file
has_field_separator = 'X' "Tab-delimited ASCII upload.
changing
data_tab = i_file
exceptions
file_open_error = 1
file_read_error = 2
no_batch = 3
gui_refuse_filetransfer = 4
invalid_type = 5
no_authority = 6
unknown_error = 7
bad_data_format = 8
header_not_allowed = 9
separator_not_allowed = 10
header_too_long = 11
unknown_dp_error = 12
access_denied = 13
dp_out_of_memory = 14
disk_full = 15
dp_timeout = 16
not_supported_by_gui = 17
error_no_gui = 18
others = 19.
if sy-subrc <> 0.
* Error handling
endif.
Hope this helps.
JB -
GUI_UPLOAD+HAS_FIELD_SEPARATOR
Hi everybody .
In my program, I use the fm GUI_UPLOAD to upload the flat file which separator is the pipe(|).
Exemple of line : AAA|BBB|CCC|DDD
HAS_FIELD_SEPARATOR='|' not working, so how can i use this fm and define SEPARATOR as pipe .
thank in advanceHi ,
I believe the field separator parameter will work for Excel files..You have to get the internal table in a string format..and then use split statement..
Use the below code it work for me..
DATA: BEGIN OF it_tab OCCURS 0,
object_id TYPE string,
version_series_id TYPE string,
version_number TYPE string,
revision TYPE string,
doc_number TYPE string,
doctitle TYPE string,
filesize TYPE string,
mime_type TYPE string,
plantunit TYPE string,
END OF it_tab.
DATA: t_tab TYPE TABLE OF string,
v_string TYPE string.
CALL FUNCTION 'GUI_UPLOAD'
EXPORTING
filename = 'C:\TEST.TXT'
has_field_separator = '|' "Actually not required.*
TABLES
data_tab = t_tab
EXCEPTIONS
file_open_error = 1
file_read_error = 2
no_batch = 3
gui_refuse_filetransfer = 4
invalid_type = 5
no_authority = 6
unknown_error = 7
bad_data_format = 8
header_not_allowed = 9
separator_not_allowed = 10
header_too_long = 11
unknown_dp_error = 12
access_denied = 13
dp_out_of_memory = 14
disk_full = 15
dp_timeout = 16
OTHERS = 17.
IF sy-subrc 0.
ENDIF.
LOOP AT t_tab INTO v_string.
SPLIT v_string AT '|'
INTO
it_tab-object_id
it_tab-version_series_id
it_tab-version_number
it_tab-revision
it_tab-doc_number
it_tab-doctitle
it_tab-filesize
it_tab-mime_type
it_tab-plantunit.
APPEND it_tab.
CLEAR: it_tab.
ENDLOOP.
Regards,
DHina..
Edited by: Dhina DMD on May 13, 2011 1:41 PM
Edited by: Dhina DMD on May 13, 2011 1:47 PM -
DIFFERENCE BETWEEN OPEN_DATASET AND GUI_UPLOAD
WHY WE USE OPEN_DATASET TO FETCH DATA FROM APPLICATION SERVER WHERE AS WE USE ONLY GUI_UPLOAD TO FETCH FROM PRESENTATION SERVER?
Hi,
Open dataset is used to transfer the contents to Application server file or to read the contents from Application server
GUI_UPLOAD is used to transfer the contents from Presentation system file to internal table
GUI_DOWNLOAD is used to transfer the contents from internal table to Presentation system file
Application server file read/write:
http://help.sap.com/saphelp_nw04/Helpdata/EN/fc/eb3ca6358411d1829f0000e829fbfe/frameset.htm
http://help.sap.com/saphelp_nw04/Helpdata/EN/fc/eb3ca6358411d1829f0000e829fbfe/frameset.htm
presentation system file read/write:
Sample ABAP Program to download table using new function GUI_DOWNLOAD
*& Report ZDOWNLOAD *
*& This program uses the new function GUI_DOWNLOAD *
*& Output will be TAB delimited and include MANDT *
*& It can be opened directly by Microsoft Excel *
*& To use this program for any Database Table replace ZTEST with *
*& new table name. *
*& AUTHOR: Sheila Titchener - abap at iconet-ltd.co.uk *
*& Date: February 2004 *
REPORT zdownload MESSAGE-ID bd.
DATA: w_tab TYPE ztest.
DATA: i_tab TYPE STANDARD TABLE OF ztest.
DATA: v_subrc(2),
v_recswritten(6).
PARAMETERS: p_file(80)
DEFAULT 'D:
ICONET
SAP
ZTEST.DAT'.
DATA: filename TYPE string.
filename = p_file.
SELECT * FROM ztest INTO TABLE I_TAB.
If text fields appear right justified or columns not lined up in output set
TRUNC_TRAILING_BLANKS to X
CALL FUNCTION 'GUI_DOWNLOAD'
EXPORTING
BIN_FILESIZE =
filename = filename
FILETYPE = 'ASC'
APPEND = ' '
WRITE_FIELD_SEPARATOR = 'X'
HEADER = '00'
TRUNC_TRAILING_BLANKS = 'X '
WRITE_LF = 'X'
COL_SELECT = ' '
COL_SELECT_MASK = ' '
IMPORTING
FILELENGTH =
tables
data_tab = I_TAB
EXCEPTIONS
FILE_WRITE_ERROR = 1
NO_BATCH = 2
GUI_REFUSE_FILETRANSFER = 3
INVALID_TYPE = 4
NO_AUTHORITY = 5
UNKNOWN_ERROR = 6
HEADER_NOT_ALLOWED = 7
SEPARATOR_NOT_ALLOWED = 8
FILESIZE_NOT_ALLOWED = 9
HEADER_TOO_LONG = 10
DP_ERROR_CREATE = 11
DP_ERROR_SEND = 12
DP_ERROR_WRITE = 13
UNKNOWN_DP_ERROR = 14
ACCESS_DENIED = 15
DP_OUT_OF_MEMORY = 16
DISK_FULL = 17
DP_TIMEOUT = 18
FILE_NOT_FOUND = 19
DATAPROVIDER_EXCEPTION = 20
CONTROL_FLUSH_ERROR = 21
OTHERS = 22
SYST FIELDS ARE NOT SET BY THIS FUNCTION SO DISPLAY THE ERROR CODE *
IF sy-subrc <> 0.
v_subrc = sy-subrc.
MESSAGE e899 WITH 'File Open Error' v_subrc.
ENDIF.
DESCRIBE TABLE i_tab LINES v_recswritten.
MESSAGE i899 WITH v_recswritten 'Records Written from ZTEST'.
Sample ABAP Program to Upload table using new function GUI_UPLOAD
*& Report ZUPLOAD *
*& This program uses the new function GUI_UPLOAD *
*& Input must be TAB delimited with a blank column at the start *
*& to allow for MANDT. *
*& To use this program for any Database Table replace ZTEST with *
*& new table name. *
*& AUTHOR: Sheila Titchener - abap at iconet-ltd.co.uk *
*& Date: February 2004 *
REPORT zupload MESSAGE-ID bd.
DATA: w_tab TYPE ZTEST.
DATA: i_tab TYPE STANDARD TABLE OF ZTEST.
DATA: v_subrc(2),
v_recswritten(6).
PARAMETERS: p_file(80)
DEFAULT 'C:\Temp\ZTEST.TXT'.
DATA: filename TYPE string,
w_ans(1) TYPE c.
filename = p_file.
CALL FUNCTION 'POPUP_TO_CONFIRM'
EXPORTING
titlebar = 'Upload Confirmation'
DIAGNOSE_OBJECT = ' '
text_question = p_file
text_button_1 = 'Yes'(001)
ICON_BUTTON_1 = ' '
text_button_2 = 'No'(002)
ICON_BUTTON_2 = ' '
default_button = '2'
DISPLAY_CANCEL_BUTTON = 'X'
USERDEFINED_F1_HELP = ' '
START_COLUMN = 25
START_ROW = 6
POPUP_TYPE =
IV_QUICKINFO_BUTTON_1 = ' '
IV_QUICKINFO_BUTTON_2 = ' '
IMPORTING
answer = w_ans
TABLES
PARAMETER =
EXCEPTIONS
TEXT_NOT_FOUND = 1
OTHERS = 2
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
CHECK w_ans = 1.
CALL FUNCTION 'GUI_UPLOAD'
EXPORTING
filename = filename
FILETYPE = 'ASC
has_field_separator = 'X'
HEADER_LENGTH = 0
READ_BY_LINE = 'X'
IMPORTING
FILELENGTH =
HEADER =
TABLES
data_tab = i_tab
EXCEPTIONS
file_open_error = 1
file_read_error = 2
no_batch = 3
gui_refuse_filetransfer = 4
invalid_type = 5
no_authority = 6
unknown_error = 7
bad_data_format = 8
header_not_allowed = 9
separator_not_allowed = 10
header_too_long = 11
unknown_dp_error = 12
access_denied = 13
dp_out_of_memory = 14
disk_full = 15
dp_timeout = 16
OTHERS = 17.
SYST FIELDS ARE NOT SET BY THIS FUNCTION SO DISPLAY THE ERROR CODE *
IF sy-subrc <> 0.
v_subrc = sy-subrc.
MESSAGE e899 WITH 'File Open Error' v_subrc.
ENDIF.
INSERT ZTEST FROM TABLE i_tab.
COMMIT WORK AND WAIT.
MESSAGE i899 WITH sy-dbcnt 'Records Written to ZTEST'.
Thanks,
Naveen Kumar. -
What is difference between WS_UPLOAD and GUI_UPLOAD
Dear gurus,
Because my office implement SAP for a long time ago so some programs contain WS_UPLOAD function and I find that is obsolete so I want to know what is different or benefit if I modify program to use GUI_UPLOAD function instead of WS_UPLOAD function
If you have related document please give me the link.
Thank you,Hi,
WS_Download Function module is used in 4.6 c version and it is obsolete.From 6 version u need to use
GUI_Download.
WS_DOWNLOAD is obsolete function module for storing SAP data in a file in the file system of the presentation server.
CALL FUNCTION 'WS_DOWNLOAD'
EXPORTING
BIN_FILESIZE = ' '
CODEPAGE = ' '
FILENAME = ' '
FILETYPE = 'ASC'
MODE = ' '
WK1_N_FORMAT = ' '
WK1_N_SIZE = ' '
WK1_T_FORMAT = ' '
WK1_T_SIZE = ' '
COL_SELECT = ' '
COL_SELECTMASK = ' '
NO_AUTH_CHECK = ' '
IMPORTING
FILELENGTH =
TABLES
DATA_TAB = lt_datatab
FIELDNAMES =
EXCEPTIONS
FILE_OPEN_ERROR = 1
FILE_WRITE_ERROR = 2
INVALID_FILESIZE = 3
INVALID_TYPE = 4
NO_BATCH = 5
UNKNOWN_ERROR = 6
INVALID_TABLE_WIDTH = 7
GUI_REFUSE_FILETRANSFER = 8
CUSTOMER_ERROR = 9
NO_AUTHORITY = 10
OTHERS = 11
Now you ave to use method or function module GUI_DOWNLOAD
CALL METHOD CL_GUI_FRONTEND_SERVICES=>GUI_DOWNLOAD
EXPORTING
BIN_FILESIZE =
FILENAME = lv_filename
FILETYPE = 'ASC'
APPEND = SPACE
WRITE_FIELD_SEPARATOR = SPACE
HEADER = '00u2032
TRUNC_TRAILING_BLANKS = SPACE
WRITE_LF = 'X'
COL_SELECT = SPACE
COL_SELECT_MASK = SPACE
DAT_MODE = SPACE
CONFIRM_OVERWRITE = SPACE
NO_AUTH_CHECK = SPACE
CODEPAGE = SPACE
IGNORE_CERR = ABAP_TRUE
REPLACEMENT = '#'
WRITE_BOM = SPACE
TRUNC_TRAILING_BLANKS_EOL = 'X'
WK1_N_FORMAT = SPACE
WK1_N_SIZE = SPACE
WK1_T_FORMAT = SPACE
WK1_T_SIZE = SPACE
IMPORTING
FILELENGTH =
CHANGING
DATA_TAB = lt_datatab
EXCEPTIONS
FILE_WRITE_ERROR = 1
NO_BATCH = 2
GUI_REFUSE_FILETRANSFER = 3
INVALID_TYPE = 4
NO_AUTHORITY = 5
UNKNOWN_ERROR = 6
HEADER_NOT_ALLOWED = 7
SEPARATOR_NOT_ALLOWED = 8
FILESIZE_NOT_ALLOWED = 9
HEADER_TOO_LONG = 10
DP_ERROR_CREATE = 11
DP_ERROR_SEND = 12
DP_ERROR_WRITE = 13
UNKNOWN_DP_ERROR = 14
ACCESS_DENIED = 15
DP_OUT_OF_MEMORY = 16
DISK_FULL = 17
DP_TIMEOUT = 18
FILE_NOT_FOUND = 19
DATAPROVIDER_EXCEPTION = 20
CONTROL_FLUSH_ERROR = 21
NOT_SUPPORTED_BY_GUI = 22
ERROR_NO_GUI = 23
others = 24
Thanks,
Anitha -
Ws_upload and GUI_upload ....
Hi Everyone,
I got a query, I have tried using ws_upload and gui_upload both in the program...... the codes are below, If I try using .xls it gives only garbage in the internal table. .txt format is working fine. Can anyone help by haveing a look at the code piece where am I going wrong. i trid these piece of codes in both ECC6.0 and 4.6.
**************CODES BELOW*******************
FORM UPLOAD_PS_PRICE .
DATA:L_CURR LIKE EKPO-NETPR.
CALL FUNCTION 'GUI_UPLOAD'
EXPORTING
filename = p_local
filetype = 'DAT'
has_field_separator = 'X'
TABLES
data_tab = t_ps_price
exceptions
file_open_error = 1
file_read_error = 2
no_batch = 3
gui_refuse_filetransfer = 4
invalid_type = 5
no_authority = 6
unknown_error = 7
bad_data_format = 8
header_not_allowed = 9
separator_not_allowed = 10
header_too_long = 11
unknown_dp_error = 12
access_denied = 13
dp_out_of_memory = 14
disk_full = 15
dp_timeout = 16
OTHERS = 17.
IF sy-subrc <> 0.
ENDIF.
CALL FUNCTION 'WS_UPLOAD'
EXPORTING
FILENAME = P_LOCAL
FILETYPE = 'DAT'
TABLES
DATA_TAB = T_PS_PRICE
EXCEPTIONS
CONVERSION_ERROR = 1
FILE_OPEN_ERROR = 2
FILE_READ_ERROR = 3
INVALID_TYPE = 4
NO_BATCH = 5
UNKNOWN_ERROR = 6
INVALID_TABLE_WIDTH = 7
GUI_REFUSE_FILETRANSFER = 8
CUSTOMER_ERROR = 9
OTHERS = 10.
IF SY-SUBRC <> 0.
MESSAGE S002 WITH TEXT-007.
ENDIF.hi
good
did you debug the code and try to find out where is the exact error is, because it is quite difficult to give you the correct reply with this bit of code.
thanks
mrutyun^ -
GUI_UPLOAD not working for text file upload with '|' as a saperater
Dear all,
I have used 'GUI_UPLOAD' to upload data from text file having below format,
1000|HBK1|HKTI
1000|HBK2|HKTI
1000|HBK3|HKTI
My code is as below
*& Report ZTEST_NEW1
REPORT ZTEST_NEW1.
TYPE-POOLS: truxs,
kcde.
TYPES : BEGIN OF ty_data2 ,
zbukr TYPE payr-zbukr ,
hbkid TYPE payr-hbkid ,
hktid TYPE payr-hktid ,
END OF ty_data2 .
DATA : it_file TYPE filetable .
DATA : wa_file LIKE LINE OF it_file .
DATA : w_rc TYPE i ,
lv_file TYPE string .
DATA : it_data2 TYPE TABLE OF ty_data2,
wa_data2 LIKE LINE OF it_data2.
SELECTION-SCREEN BEGIN OF BLOCK bk1 WITH FRAME TITLE text-020.
PARAMETER : pr_file TYPE rlgrap-filename .
SELECTION-SCREEN END OF BLOCK bk1 .
AT SELECTION-SCREEN ON VALUE-REQUEST FOR pr_file.
PERFORM get_file.
START-OF-SELECTION.
PERFORM get_data.
FORM get_file .
CALL METHOD cl_gui_frontend_services=>file_open_dialog
* EXPORTING
* WINDOW_TITLE =
* DEFAULT_EXTENSION =
* DEFAULT_FILENAME =
* FILE_FILTER =
* INITIAL_DIRECTORY =
* MULTISELECTION =
* WITH_ENCODING =
CHANGING
file_table = it_file
rc = w_rc
* USER_ACTION =
* FILE_ENCODING =
EXCEPTIONS
file_open_dialog_failed = 1
cntl_error = 2
error_no_gui = 3
not_supported_by_gui = 4
OTHERS = 5
IF sy-subrc EQ 0.
CLEAR : wa_file.
LOOP AT it_file INTO wa_file.
pr_file = wa_file-filename.
CLEAR : wa_file.
ENDLOOP.
ELSE.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
ENDFORM. " get_file
FORM get_data .
IF pr_file IS INITIAL.
MESSAGE 'Enter file name'(002) TYPE 'E'.
ENDIF.
IF pr_file CP '*.xls'
or pr_file CP '*.xlsx' . " Added
ELSEIF pr_file CP '*.txt'.
CONSTANTS : c_del TYPE c LENGTH 1 VALUE '|'.
lv_file = pr_file.
CALL FUNCTION 'GUI_UPLOAD'
EXPORTING
FILENAME = lv_file
FILETYPE = 'ASC'
HAS_FIELD_SEPARATOR = c_del
* HEADER_LENGTH = 1
* READ_BY_LINE = 'X'
* DAT_MODE = ' '
* CODEPAGE = ' '
* IGNORE_CERR = ABAP_TRUE
* REPLACEMENT = '#'
* CHECK_BOM = ' '
* VIRUS_SCAN_PROFILE =
* IMPORTING
* FILELENGTH =
* HEADER =
TABLES
DATA_TAB = it_data2
* EXCEPTIONS
* FILE_OPEN_ERROR = 1
* FILE_READ_ERROR = 2
* NO_BATCH = 3
* GUI_REFUSE_FILETRANSFER = 4
* INVALID_TYPE = 5
* NO_AUTHORITY = 6
* UNKNOWN_ERROR = 7
* BAD_DATA_FORMAT = 8
* HEADER_NOT_ALLOWED = 9
* SEPARATOR_NOT_ALLOWED = 10
* HEADER_TOO_LONG = 11
* UNKNOWN_DP_ERROR = 12
* ACCESS_DENIED = 13
* DP_OUT_OF_MEMORY = 14
* DISK_FULL = 15
* DP_TIMEOUT = 16
* OTHERS = 17
IF SY-SUBRC <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
endif.
ENDFORM. " get_data
In my output I am only getting company codes and not getting other two columns, can any body guide me where I am doing wrong?
I have checked many other same kind of threads and I have done the same as suggested to do but still I am facing issue.
Thanks in advance.
Regards,
UmangHi Umang,
There is a simple solution to this problem. Make the following changes to your code(marked in red color):
REPORT ZTEST_NEW1.
TYPE-POOLS: truxs,
kcde.
TYPES : BEGIN OF ty_data2 ,
zbukr TYPE payr-zbukr ,
hbkid TYPE payr-hbkid ,
hktid TYPE payr-hktid ,
END OF ty_data2 .
types: begin of ty_data
str type char200,
end of ty_data.
DATA: it_data type table of ty_data,
wa_data type ty_data.
DATA : it_file TYPE filetable .
DATA : wa_file LIKE LINE OF it_file .
DATA : w_rc TYPE i ,
lv_file TYPE string .
DATA : it_data2 TYPE TABLE OF ty_data2,
wa_data2 LIKE LINE OF it_data2.
rest of the code **
FORM get_data .
IF pr_file IS INITIAL.
MESSAGE 'Enter file name'(002) TYPE 'E'.
ENDIF.
IF pr_file CP '*.xls'
or pr_file CP '*.xlsx' . " Added
ELSEIF pr_file CP '*.txt'.
CONSTANTS : c_del TYPE c LENGTH 1 VALUE '|'.
lv_file = pr_file.
CALL FUNCTION 'GUI_UPLOAD'
EXPORTING
FILENAME = lv_file
FILETYPE = 'ASC'
*HAS_FIELD_SEPARATOR = c_del "comment this line
HEADER_LENGTH = 1
READ_BY_LINE = 'X'
DAT_MODE = ' '
CODEPAGE = ' '
IGNORE_CERR = ABAP_TRUE
REPLACEMENT = '#'
CHECK_BOM = ' '
VIRUS_SCAN_PROFILE =
IMPORTING
FILELENGTH =
HEADER =
TABLES
DATA_TAB = it_data
EXCEPTIONS
FILE_OPEN_ERROR = 1
FILE_READ_ERROR = 2
NO_BATCH = 3
GUI_REFUSE_FILETRANSFER = 4
INVALID_TYPE = 5
NO_AUTHORITY = 6
UNKNOWN_ERROR = 7
BAD_DATA_FORMAT = 8
HEADER_NOT_ALLOWED = 9
SEPARATOR_NOT_ALLOWED = 10
HEADER_TOO_LONG = 11
UNKNOWN_DP_ERROR = 12
ACCESS_DENIED = 13
DP_OUT_OF_MEMORY = 14
DISK_FULL = 15
DP_TIMEOUT = 16
OTHERS = 17
IF SY-SUBRC 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
endif.
Loop at it_data into wa_data.
split wa_data-str at '|' into wa_data2-zbukr wa_data2-hbkid wa_data2-hktid.
append wa_data2 to it_data2.
clear wa_data2.
Endloop.
ENDFORM. " get_data
IT_DATA2 will contain the final uploaded data. Hope this helps -
FILE_OPEN_ERROR gui_upload
Hi there , I´m facing some troubles with the following code :
CALL FUNCTION 'GUI_UPLOAD'
EXPORTING
FILENAME = c:/example.txt
FILETYPE = 'ASC'
HAS_FIELD_SEPARATOR = 'X'
HEADER_LENGTH = 0
READ_BY_LINE = 'X'
DAT_MODE = ' '
CODEPAGE = ' '
IGNORE_CERR = ABAP_TRUE
REPLACEMENT = '#'
CHECK_BOM = ' '
VIRUS_SCAN_PROFILE =
NO_AUTH_CHECK = ' '
IMPORTING
FILELENGTH =
HEADER =
TABLES
DATA_TAB = reg_maestro
EXCEPTIONS
FILE_OPEN_ERROR = 1
FILE_READ_ERROR = 2
NO_BATCH = 3
GUI_REFUSE_FILETRANSFER = 4
INVALID_TYPE = 5
NO_AUTHORITY = 6
UNKNOWN_ERROR = 7
BAD_DATA_FORMAT = 8
HEADER_NOT_ALLOWED = 9
SEPARATOR_NOT_ALLOWED = 10
HEADER_TOO_LONG = 11
UNKNOWN_DP_ERROR = 12
ACCESS_DENIED = 13
DP_OUT_OF_MEMORY = 14
DISK_FULL = 15
DP_TIMEOUT = 16
OTHERS = 17 .
I´ve created a empty example.txt file and put this in c:/ , but I got the error FILE_OPEN_ERROR , we recently upgrade to ecc 6.0 but I don´t if something is missing in the process about this kind of fuction.HI,
Just try it simply as below.
the possible reasons could be.
1) file with that name is not existing in that path
2) path name is wrong (u gave it as c:/ give it as c:\)
3) file may be open..
how ever just try with giving the file path and the output table and see how it works
*-- Read the File From PC
CALL FUNCTION 'GUI_UPLOAD'
EXPORTING
FILENAME = V_FILENAME
TABLES
DATA_TAB = I_FILE
EXCEPTIONS
OTHERS = 17.
Thanks
mahesh
Maybe you are looking for
-
Which tech i should look into if i want to...
hi all, i am looking for guide on using Java tech to 1. "talk" to GSM modems 2. end-to-end encryption i.e. decrypt files from media using dynamic decryption technologies and encrypt with another type on-the-fly without human intervention. please en l
-
I need to connect locally to a mdb file on a Windows OS and manipulate its data. I have tried the sun.jdbc.odbc.JdbcOdbcDriver but it does not support primary keys manipulation. I have read numerous topics about JDBC drivers for MS Access, some of th
-
My Mac OS is version 10.5.8 can I update to the lastest OS?
I want to upgrade the OS but not sure if I can go straight to the latest OS or if I need to install another one first?
-
Nokia ovi suite 3.0.0.290 bluetooth
i have a big problem " i have a windows 7 64 bit when i install my ovi suite i found (use bluetooth instead) disable what can i do to connect my phone via bluetooth Attachments: Doc2.doc 131 KB
-
Hi Guys! I have a master details form in Oracle Form 10g. In my master block I have a list item. Depending on the value I choose in that list I make changes in the details block and I call a procedure that do lots of insert in some database tables. T