GWHA - argh! Can't get it to work!
I swear, if gwha had a neck I'd choke it. I'm so frustrated that I can't get this service to function. I'm pretty sure everything's configured correctly, but if I stop an agent it never gets restarted by gwha.
Server: OES2, fully patched. GroupWise 7.0.3 - installed components on this server are MTA, GWIA, 1 PO, WebAccess Agent, Monitor, gwha, Mesenger agents. WebAccess App is on a separate front-end server.
All agents loading correctly. Can access monitor via http://server:8200.
/etc/xinetd.d/gwha:
service gwha
socket_type = stream
protocol = tcp
wait = no
user = root
server = /opt/novell/groupwise/agents/bin/gwha
instances = 1
type = UNLISTED
port = 8400
disabled = no
/etc/opt/novell/groupwise/gwha.conf:
[gwha]
ssl = yes
key = /opt/novell/messenger/certs/mailSSL.key
cert = /opt/novell/messenger/certs/mailSSL.b64
password = <password>
*note: This is the same certificate used for Messenger, which is working correctly so the cert info/password must be good.
/etc/init.d/grpwise-ma:
MA_CONFIG=/opt/novell/groupwise/agents/share/monitor.xml
MA_BIN=/opt/novell/groupwise/agents/bin/gwmon
MA_OPTIONS="--hauser gwhauser --hapassword <password> --hapoll 15"
* Using the same password as the cert - would this cause a problem?
It is loading via xinetd - at least I think it is, it's showing as an active process with ps. One weird thing is that even though I'm setting the polling for monitor to 15 seconds, when viewing via the web it doesn't actually show a dead agent for 5 minutes. I see in preferences there is a poll cycle setting configured for 300 seconds, but if I change it and save it always stays at 300.
So after configuring everything and rebooting the server for good measure, I stop the PO and keep checking status. I've let it run for well beyond 5 mins and it never starts back up. What am I missing??!!
I don't know if you ever got this working, but I had a hell of a time, too. If you want to change the polling rate, you have to change it on the monitor servlet web page, not the agent web page. Why? Just because. Try changing it here:
http://servername/gwmon/gwmonitor
Secondly, make sure that you have port 8400 open on the box you want to restart the agent from. You can test it by telnet from your monitor server:
telnet <target server> 8400
You should see a prompt for a username and password. If you get that far, then the gwha agent should be able to restart your services.
You also need to check and make sure your target server can talk to your monitor server.
Hope that helps.
Originally Posted by vbutler
I swear, if gwha had a neck I'd choke it. I'm so frustrated that I can't get this service to function. I'm pretty sure everything's configured correctly, but if I stop an agent it never gets restarted by gwha.
Server: OES2, fully patched. GroupWise 7.0.3 - installed components on this server are MTA, GWIA, 1 PO, WebAccess Agent, Monitor, gwha, Mesenger agents. WebAccess App is on a separate front-end server.
All agents loading correctly. Can access monitor via http://server:8200.
/etc/xinetd.d/gwha:
service gwha
socket_type = stream
protocol = tcp
wait = no
user = root
server = /opt/novell/groupwise/agents/bin/gwha
instances = 1
type = UNLISTED
port = 8400
disabled = no
/etc/opt/novell/groupwise/gwha.conf:
[gwha]
ssl = yes
key = /opt/novell/messenger/certs/mailSSL.key
cert = /opt/novell/messenger/certs/mailSSL.b64
password = <password>
*note: This is the same certificate used for Messenger, which is working correctly so the cert info/password must be good.
/etc/init.d/grpwise-ma:
MA_CONFIG=/opt/novell/groupwise/agents/share/monitor.xml
MA_BIN=/opt/novell/groupwise/agents/bin/gwmon
MA_OPTIONS="--hauser gwhauser --hapassword <password> --hapoll 15"
* Using the same password as the cert - would this cause a problem?
It is loading via xinetd - at least I think it is, it's showing as an active process with ps. One weird thing is that even though I'm setting the polling for monitor to 15 seconds, when viewing via the web it doesn't actually show a dead agent for 5 minutes. I see in preferences there is a poll cycle setting configured for 300 seconds, but if I change it and save it always stays at 300.
So after configuring everything and rebooting the server for good measure, I stop the PO and keep checking status. I've let it run for well beyond 5 mins and it never starts back up. What am I missing??!!
Similar Messages
-
Have entrourage and want to use Mail. Can't get it to work.
I had a macbook and purchased the Microsoft office for Mac which included Entrourage.
I have now purchased a new macbook Pro and want to begin to use Mail rather than Entrourage.
I have Entrourage on my new computer but i can't get it to transfer my information to the the Mail program
I am on Charter.net at my office and sbcglobal.net at home.
How can i get this to work. I can receive on Mail, but i can't send.check your outgoing port settings and make sure it's using a specific port and not the default port, also you might want to check to see if it is using SSL, TLS or any other encryption. Verify the setting from your old machine setup.
-
got my password wrong twice and my mini is disable. I connected to iTunes, but can't get it to work. Can some one guide my through?
If it's showing the red disabled screen due to incorrect passcodes then you may need to put the iPad into recovery mode : http://support.apple.com/kb/ht1808 - you should then be able to reset the iPad via your computer's iTunes and restore/resync your content to it
-
HT1151 i have a new apple external dvd drive, and i can't get it to work with my iMac?
I have a new apple dvd drive, I was told it will work with my imac, but when i plug it in ...nothing... iv been for update... still nothing. How can i get it to work???
If it is this drive, note that it is for MBA's and Mini's only:
http://store.apple.com/us/product/MC684ZM/A
Ciao. -
Is there a way to reset my messages account, I can't get iMessage to work on IPad nor Mac osx. Help please this is really frustrating.
Hi,
Is there an iPhone involved ?
If not, what happens if you remove the Apple ID on the iPad and then set it in Airplane Mode (allow a couple of minutes at this point) followed by re-adding the Apple ID ?
What, if any error messages are appearing on the Mac when you try to launch the App or Login to the iMessages server ?
Is the Apple ID linked to an iCloud account ?
In Messages 7 (Mountain Lion) this did not seem to be important but it seems it is in Mavericks/Messages 8
9:14 pm Friday; April 11, 2014
iMac 2.5Ghz i5 2011 (Mavericks 10.9)
G4/1GhzDual MDD (Leopard 10.5.8)
MacBookPro 2Gb (Snow Leopard 10.6.8)
Mac OS X (10.6.8),
Couple of iPhones and an iPad -
I bought an IR receiver and an Apple Remote, and I can't get it to work. What am I doing wrong? The receiver is a Lenovo eHome OVU430006/01 USB IR Receiver.
Hello,
You would need to pair the Apple Remote with the receiver. So I would use the generic Mac/PC receiver and follow these instructions:
http://support.apple.com/kb/HT1619
If that doesn't work then check in System Profiler to see if the IR receiver has been recognized by the PowerBook's hardware. You may require the install of drivers for this device to be recognized.
Best of luck -
I have a go daddy email account and I can't get it to work on my iPad
I have a go daddy email account and I can't get it to work on my iPad
Try turning the email account off and then turn it on again. Settings>Mail, Contacts, Calendars>select your gmail account>Off. Go to the mail app and then come back to the account in the settings and turn it on again.
If you can't find any other way for the iPad to accept the password, delete the email account and then add it back onto the iPad. -
I have a Mac Mini and I can't get it to work with my Ricoh Aficio MP 161. Any ideas?
I have a Mac Mini and I can't get it to work with my Ricoh Aficio MP 161. Any ideas?
The latest Apple driver support begins with the MP 171.
Here is Ricoh's official driver download page specifically for the Afico MP 161. Note that new drivers for this device were released on Aug 2, and include Lion and Mountain Lion.
Hopefully, this will solve your device issues. -
Iphone 5 went black. Tried pushing on/off and circle at the same time. Worked yesterday and then did it again today. Can't get it to work.
You need to hold those button longer until you see the apple logo, then release, then wait for the phone to boot back up.
-
I just bought a new computer and had files transferred along with itunes to the new computer. I can't get it to work. It doesn't recognize the extensions for itunes. I also tried downloading Quicktime and couldn't get it to download.
iOS: Device not recognized in iTunes for Windows
I would start with:
Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7 -
I bought a DATAPILOT to transfer pictures to my macbook and can't get it to work. Any suggestions please?
Best if you try and explain what you are trying to acheive.
Iphoto is a different paradigm than you're used to. I don't understand why you are trying to transfer your edited photos back to an external disk.
There are tutorials here
http://www.apple.com/findouthow/photos/
Regards
TD -
I have signed up for adobe conversion to microsoft word and i can't get it to work - can you help me
I have signed up for adobe conversion to microsoft word and I can not get it to work - can you help me?
Hi Mike,
I've checked your account. I see that you just purchased the subscription this morning. The order is still pending processing, which is why you haven't yet been able to log in an use your subscription. It can take 24-48 hours for a subscription to process fully. Once it does, you'll be able to log in and convert files.
I apologize for the inconvenience.
Best,
Sara -
Trying to connect 2010 Mac mini to alba hd tv but can't get it to work, any theories?
Trying to connect 2010 Mac mini to alba hd tv but can't get it to work, any theories?
Welcome to the Apple Community.
The iPad 1 is only able to do basic AirPlay, many providers of programming have blocked their apps from working with AirPlay. -
I just bought Quick time Pro and I can't get it to install. It shows a yellow box in my application folder, but I can't get it to work. Help!
you launch QT then go to its REGISTRATION
-
Downloaded the App Sales Call Manager. I can't get it to work on either my Iphone 4s or my Ipad2? Can anybody advise how to fix or even get back my money that i paid for it?
Contact the app developer for support. A link to their website will be in the apps description in the AppStore.
-
have an airplay enabled AV Receiver - how do i set up Airplay
I have a Yamaha RX-V673 which is Airplay enabled, but i can't get Airplay to work either on my Mac book or my iphone. The receiver is connected to my network and i can control it using the iphone App and via the web browser option.
Do I need Apple TV or to change some settings somewhere?
Any help would be greatly appreciatedYou are making some progress with setup of wireless network. Apparently there is reliability problem with the wireless connection. Perhaps you want to refer to following Apple support documents and start tweaking parameters in the router to improve the reliability. I used to have third-party routers such as Belkin and Netgear but switched to Apple Airport routers (Time Capsule then Airport Extreme for now) because of incompatibility issues whenever Apple upgrade Mac OS X. But since Apple develops Airplay protocol as alternative to Bluetooth for wireless audio/video streaming (with much better bandwidth) and must be deployed in any wireless network, there is no reason third-party routers not working for Airplay protocol.
About AirPlay Mirroring in OS X Mountain Lion:
http://support.apple.com/kb/HT5404
iOS: Recommended settings for Wi-Fi routers and access points:
http://support.apple.com/kb/HT4199
Troubleshooting AirPlay and AirPlay Mirroring:
http://support.apple.com/kb/TS4215
Good luck in setting up 802.11 wirelesss network.
Maybe you are looking for
-
Secondary Cost Element Values doesn't display in Profit Center Report
Hi everyone, I'm having a problem with our Profit Center plan/actual/variance reports wherein it doesn't display the postings I made to the Secondary cost element when I executed an assessment cycle (KSU5). I already set in the configuration that all
-
What screen resolutions are available on His-res 15" MacBook Pro?
Hi. I can see in the apple web site specs what the various screen resolution settings are for the standard resultion, 1440x900, 15" MacBook Pro (1440x900, 1280x800, 1152x720, etc.) But what are the settings available for the 15" MacBook Pro with th
-
Can I find OCS database structure anywhere ? I'm making definitions for a customer to migrate their current email system to OCS. Current system is nor Outlook neither Lotus but Teamware (Fujitsu) and I think I have to do data conversion programs from
-
I've got CS5 and I'm still learning the ropes. I've advanced to creating my own ICC print profiles, which I'm using. CS5 has a long list of these in the print dialogue. I have occasionally updated the profiles that I have created ( which now appea
-
How to insert namespace prefix when using xmltype
Hi, I have registered the following XML schema into XMLDB. <s:schema xmlns:s="http://www.w3.org/2001/XMLSchema" xmlns:xdb="http://xmlns.oracle.com/xdb" xmlns:m="https://suora.tietopalvelut.com/ATJkysely/" targetNamespace="https://suora.tietopalvelut.