H E L P mac math foonths to windows-compatible fonts

im a novice when it comes to font development. i want to convert mac math fonts to pc-compatible fonts. ive been trying to follow the guidelines on how to do it but i cant seem to have an output. dont know how python works and i dont know if my files are correct. i have "PalatBol, PalatBolIta, Palatino, PalatIta and PalatRom" and some other mac math fonts. so how do i put it in features file, etc. and what is "an outline font" mentioned in the overview? i dont see also the window wen i double-click on the makeotf.py (regarding makeotf.py, mentioned and shown on page 2 of the documentation).
pls help me as i have a deadline to meet.
im pc-based by the way. thank you very much.

If you simply want to convert existing fonts to an equivalent pc version, then the FDK is the wrong tool. OpenType fonts have a lot of new meta-data that older formats do not have, and you will have to spend quite a bit time researching and making choices about how to build the new data. These areas are:
- extended set of menu names and other text info
- Unicode encoding tables
- OpenType layout features: these are very complex for math
- Panose number and other data for the OS/2 table
You best choice for the specific task of converting is the TypeTool products from FontLab ( see http://www.fontlab.com/html/typetool.html).
You may alo be able to make do with the free conversion tools at:
http://fondu.sourceforge.net/
These do not cover all the flavors of font data you might want, but if you can figure out how to use them and they cover the cases of interest to you, they will be sufficient.
I recommend the TypeTool , as it comes with a manual and requires relatively little computer and font expertise.
The specific problem you have with the FDK shows that the Python interpreter does not know where to find the FDK add-on modules. This means in turn that you need to run the FinishInstall.py. NOTE! You have to run this as described in the installation instructions: you must run it by dragging it onto the icon for the Python interpreter. If you run it by double-clicking on it, it will make incorrect file-paths.

Similar Messages

How to make the "@" on a Mac Book Pro when Windows XP is booted

How do I make a "@" on the Mac Book black when Windows XP is booted? Sinc Alt GR does not exist I tried several possibilities, but I did not have success.
Can anybody help me
Regards Chris

Hi
you need to change the keyboard setup to English in your windows
hope this helps
Clinton

How can I delete Mac files from my windows boot?

My OS is corrupt and I'm trying to reinstall Maverik, but ran out of space. Is there a way to delete Mac files from my Windows BootCamp?

windows require thirdparty software to write to mac filesystems
windows write to mac os extended

How can I install Mac Mini drivers for Windows 7 32-bit if I didn't install Windows 7 using bootcamp?

Hello. I have a mac-mini (mid 2010) and with bootcamp, was successfully running XP.
I then decided to upgraded to Windows 7 had lots of trouble installing it on my existing bootcamp partition.
I finally was able to install Windows 7, by just booting off the CD and letting it install that way.
But reading more on it, I think I was supposed to use Bootcamp to do it for me...
I had thought the Bootcamp Assistant was for only fresh installs of a Windows O.S. where no partitiion existed previously.
I had a partition so thought Bootcamp wasn't required for my needs.
But now, inside Windows 7, I have 0 drivers installed. I have an AirPort Express, so on the Mac side, I downloaded
and installed the Windows version of AirPort Utility and copied it to my USB stick. Then
I exported my settings to a text file on a USB Stick, then on Windows was able to successfully install AirPort Utility and import the settings.
But it still doesn't find my network. I am pretty sure I'm broadcasting my SSID...
So I need to know the following:
1) How to know I'm broadcasting my SSID - where do I find this in settings?
2) How I can install my mac-mini drivers on Windows 7 so I can use my existing wireless network, now that I've gone through the installation without using Bootcamp?
3) Do I need to set up network adapters and all that stuff in Windows 7 first? If so, how and what drivers do I need?
One other thing I tried was downloading Bootccamp 4.x and installing that on Windows 7 to see if it gives me the drivers that were supposed to be written to my USB stick if I had installed Windows 7 using Bootcamp in the first place... However I think the message it said was that it couldn't install as it was the wrong version. So I'm still stuck without drivers and therefore no internet.
And that is my main task - getting the Internet up and running in Windows 7.
Other Info:
I'm running Mac OS X 10.6.8 with 2 GB of memory.
I installed the 32-bit version of Windows 7 and I don't know what version of Bootcamp I'm running...
I can tell you that BootCamp Assistant is v3.0.4, but don't know if that means Bootcamp is also 3.0.4.
Hope you can help.
Thanks.

I tried something that worked for me...
Knowing that after my install of Windows 7 wasn't the correct method (didn't go through bootcamp), and the BootCamp 4.x package wouldn't install under windows 7, I tried reinstalling Bootcamp 4.x in Windows 7 to see what the exact message was it gave me. The message said it couldn't install because of a 32-bit O.S. vs a 64-bit version of the package.
So that got me thinging - my XP version was 32-bit, and so is my Windows 7 installation. So I tried installing the bootcamp that came with my Mac OS X installation CD. This is bootcamp version 3.1.
Not only did it install, but it practically took care of everything driver-wise for me. I was then able to see my wireless network, enter my password and I was connected. The only thing else I had to do to get on the Internet was bring IE8 online (guess it ships offline by default). Firewall and Antivirus are now installed, just a few more things to go.
That's one thing that's just not clear that I'll be sure to note for next time... The Bootcamp packages you download are actually driver packages for Windows. That is where the Windows drivers exists that are necessary to make your Windows 7 PC work on a bootcamp partition!
I didn't need the AirPoirt Utility at all (at least, I never went into it).
Thanks VikingOSX for your post. I will not need to follow the steps you provided, but they may help someone else as all of these bootcamp issues I've been reading seem to be very unique per installation.
Hopefully my solution helps others.

Firefox (latest versions) on both Mac 10.6 and Windows 7 show "this Connection is Untrusted" on my bank site

This started for me 1/17/2011 on the savingsbank.com website:
Firefox (latest versions) on both Mac 10.6 and Windows 7 show "this Connection is Untrusted" on my bank site https://www.savingsbank.com
NO other browsers - Explorer, Chrome, Safari - give this error box on this site. Please advise if this has to do with the bank site? or Firefox compatibility.
Saw in a forum someone else having this problem and they were told it had to do with their Date and time being off?? I've been on several computers, all with the correct date and time and they've all shown this Insecure Certificate statement on my bank site with Firefox and no other browser.

I've looked at the banking site with IE8 and it does NOT show me that "This connection is Untrusted" window. (please see attached screen shot of viewing the site with IE8) It opens fine and has "Identified by Network Solutions" showing on the address bar as it always does.
The latest version of Opera (not earlier ones) does show a problem with the website's security certificate.
We've contacted the bank about this, and they say there's no problem with their certificate but are looking into it.
My question remains, why only Firefox and one version of Opera claim this and NO other browser?

My Macbook browser is not compatible with a business website I must use for work. Is there a Windows compatible browser for my Mac?

My Macbook browser is not compatible with a business website I must use for work. Is there a Windows compatible browser for my Mac?

If the site has been optimised for IE (which is non-standards compliant), the best you can try is to spoof IE from Safari.
I'm using an earlier version of Safari than you, so I hope Allan or someone will correct me if the procedure is different.
First, go to Safari Preferences and enable the developer menu;
Then go to the menu and select User Agent - choose a flavour of IE.
Works about 50% of the time.
It won't work if the site is using Activex controls.

My Ipod shuffle appears in itunes on mac but not on windows 7 even though we have the latest update of itunes. We have also tried the other solutions on the apple support site.

My Ipod shuffle appears in itunes on mac but not on windows 7 even though we have the latest update of itunes. We have also tried the other solutions on the apple support site.

Hi reinkristine86!
I know you’ve said that you have tried other suggestions for troubleshooting this issue, so pardon me if you have already seen this article, but have you tried all of the troubleshooting steps listed in the article below?
iPod not recognized in My Computer and in iTunes for Windows
http://support.apple.com/kb/ts1369
Thanks for coming to the Apple Support Communities!
Cheers,
Braden

If i use a usb flash drive which is both os and windows compatible can i transfer files from my mac to a windows pc using the same usb flash drive?

if i use a usb flash drive which is mac os and windows compatible can i use it to copy files from the mac to a windows machine. i have to do some training abroad and wnat to take the files on a usb from the mac but they will only have a windows operating system available to me.

Generally, it's not the flash drive that makes it compatible, but the formatting used on it. In Disk Utility on a Mac, the format is called MS-DOS (FAT). In Windows, I believe it is called FAT32.
A USB flash drive formatted that way should be readable and writable on both Mac OS X and Windows. But you may want to try a "trial run" before relying on it for the trip.

How to completely remove mac os and install windows 7 on macbook pro with retina display 15 inch

how to completely remove mac os and install windows 7 on macbook pro with retina display 15 inch

There's not much sense in purchasing a Mac to run only Windows on it. Keep in mind that drivers for Windows are a secondary concern for Apple. While Windows will typicall run fine, things like power managment are not optimized under Windows (you'll get less time on battery while running Windows). You will also not be able to install firmware updates. Firmware updates might be necessary whether you run Windows or OS X as they are updates to the code in your hardware and are not OS-specific. You must be running OS X in order to install a firmware update. You can do this even if you boot off of an external drive with OS X installed on it. At the very least, you should keep just a small partition for OS X on your internal drive.

How can I force mount a dvd that isn't even seen by Disk Utility? I can see it on the Mac when using my Windows 7 partition via Boot Camp, but not in Lion, which is how I would rather be running.

How can I force mount a dvd that isn't even seen by Disk Utility? I can see it on the Mac when using my Windows 7 partition via Boot Camp, but not in Lion, which is how I would rather be running.

Well if there is a EFI block, then running a program in OS X isn't going to do a lick of good.
After all EFI was designed for Trusted Computing and Digital Rights Management, to act between the OS and hardware, can read drives, contact the Internet and everything.
Windows doesn't use EFI, will have UEFI in Windows 8 though.

Mac formatted iPOD to windows

My ipod is formatted for my powerbook itunes the trouble is i have itunes also on a pc that has a different music library and iwant to be able to add the pc library to my ipod without having to re-format it to windows and loose all my data.I do not have access to my mac so iwill not be able to back my data up to the mac. Thanks

If your iPod is formatted for Mac it won't run natively on a PC because Windows operating systems don't recognize Mac OS-formatted disks (HFS or HFS Plus formats). There are third party programs that will allow you to use a Mac formatted iPod on Windows. XPlay for instance gets good reviews and has the added functionality to let you copy your songs back to iTunes. Once you have your songs saved to the PC you can go ahead and restore the iPod for Windows. You can purchase XPlay at this link: XPlay 3

Cannot access Mac OS Partition from windows 8 running in boot camp

So I installed Windows 8.1 Pro through Boot Camp but I can't access the Mac OS partition from windows even though boot camp partition shows up while I'm on Mac OS. I have installed all the drivers from apple but still it didn't work. Then I downloaded Paragon HFS+ which was free for windows 8 and 8.1 thinking that this would solve my problem. The instructions told me to change the drive letter for mac partition from disk management by right clicking the drive pressing "change drive letter and path" button. But the "change drive letter and path" key in grey color and I can't press it. Can somebody please help?

Here you go
1) diskutil list
/dev/disk0
   #:                       TYPE NAME                    SIZE       IDENTIFIER
   0:      GUID_partition_scheme                        *750.2 GB   disk0
   1:                        EFI EFI                     209.7 MB   disk0s1
   2:          Apple_CoreStorage                         650.3 GB   disk0s2
   3:                 Apple_Boot Recovery HD             650.0 MB   disk0s3
   4:       Microsoft Basic Data BOOTCAMP                99.0 GB    disk0s4
/dev/disk1
   #:                       TYPE NAME                    SIZE       IDENTIFIER
   0:                  Apple_HFS Macintosh HD           *645.8 GB   disk1
                                 Logical Volume on disk0s2
                                 AFC82671-CBAA-4338-BAEC-7D272EC755B1
                                 Unencrypted
2. sudo fdisk /dev/<BootCampDisk> (from 1 of the form disk0)
i typed this: sudo fdisk /dev/disk0
Disk: /dev/disk0 geometry: 91201/255/63 [1465149168 sectors]
Signature: 0xAA55
         Starting       Ending
#: id cyl hd sec - cyl hd sec [     start -       size]
1: EE 1023 254 63 - 1023 254 63 [         1 -     409639] <Unknown ID>
2: AC 1023 254 63 - 1023 254 63 [    409640 - 1270110576] <Unknown ID>
3: AB 1023 254 63 - 1023 254 63 [1270520216 -    1269536] Darwin Boot
*4: 07 1023 254 63 - 1023 254 63 [1271791616 - 193355776] HPFS/QNX/AUX
sudo fdisk /dev/disk1
/dev/disk1: Resource busy
3. sudo gpt -vv -r show /dev/<BootCampDisk> (from 1 of the form disk0)
sudo gpt -vv -r show /dev/disk0
gpt show: /dev/disk0: mediasize=750156374016; sectorsize=512; blocks=1465149168
gpt show: /dev/disk0: Suspicious MBR at sector 0
gpt show: /dev/disk0: Pri GPT at sector 1
gpt show: /dev/disk0: Sec GPT at sector 1465149167
       start        size index contents
           0           1         MBR
           1           1         Pri GPT header
           2          32         Pri GPT table
          34           6
          40      409600      1 GPT part - C12A7328-F81F-11D2-BA4B-00A0C93EC93B
      409640 1270110576      2 GPT part - 53746F72-6167-11AA-AA11-00306543ECAC
1270520216     1269536      3 GPT part - 426F6F74-0000-11AA-AA11-00306543ECAC
1271789752        1864
1271791616   193355776      4 GPT part - EBD0A0A2-B9E5-4433-87C0-68B6B72699C7
1465147392        1743
1465149135          32         Sec GPT table
1465149167           1         Sec GPT header
I didn't quite understand the 4th step. Sorry

If you've changed your startup options on mac to start in windows, how do you fix and go back to mac on startup?

if you've changed your startup options on mac to start in windows, how do you fix and go back to mac. I can't get my mac to switch back to mac, it is like stuck in widows mode, I have tried holding down the options key upon start up and that did not fix it either.
Please help! Thank you so much!

The Apple drivers you install in Windows also puts a Startup Drive icon in the Task Bar. Choose that to change the startup disk back OS X.

Ex-Mac user now on Windows 7: How to acccess my iTunes library (now on my PC) with my Windows iTunes?

I'm an ex-Mac user now on Windows 7: How to acccess my former Mac iTunes library (now on my PC) with my Windows iTunes? I get error message: The file "iTunes Library.itl" cannot be read because it was created by a newer version of iTunes.
Can anyone help me please?
Roy

So, what I have done so far to try to achieve this is:
I have my Windows PC with it's NTFS formatted external HDD containing the music etc.
I have my Mac with a new external HDD formatted in Mac OS Extended (Journaled).
On the Windows PC:
* I opened up iTunes.
* Went into Preferences, and then under the Advanced tab I checked both 'Keep iTunes Media Folder Organised' and 'Copy files to iTunes Media folder when adding to library', so that all the files would be in the main iTunes Media folder when I copy it over.
* Then File, Library, Organise Library and ticked the 'Consolidate Files' so that it moves any files that aren't in the right folder.
Next I copied the files over. So I copied the updated media folder from the NTFS (Windows) external HDD onto the Mac external HDD.
And I copied the files from in My Documents/Music/iTunes on the Windows PC to User/Music on the Mac.
But this doesn't seem to have done it.

I cannot able able to start my macbook and then i started my mac in a recovery mode now mac os X utility window opens with 4 options 1. Restore From Time Machine Backup 2. Reinstall Mac OSX 3. Get Help Online 4. Disk Utility if i try to restore my mac wit

i cannot able able to start my macbook and then i started my mac in a recovery mode now mac os X utility window opens with 4 options 1. Restore From Time Machine Backup 2. Reinstall Mac OSX 3. Get Help Online 4. Disk Utility if i try to restore my mac with time machine no option appears if i reinstall from Mac OSX error comes and cannot able to recover from disk utility please help how can i reinstall mac OSX

Guitar21,
your MacBook Pro has booted into its Recovery mode. From the OS X Utilities menu, select Disk Utility. On the left-hand side of the Disk Utility window, select your internal disk’s boot partition (typically called “Macintosh HD”). On the right-hand side, press the Verify Disk button if it’s not greyed out; if it is greyed out, or if it reports that errors were found, press the Repair Disk button. Once the verification/repair is completed, exit Disk Utility and select Restart from the Apple menu to restart in normal mode. Does it get to the login screen now?

H E L P mac math foonths to windows-compatible fonts

Similar Messages

Maybe you are looking for