H55m-e23 not detecting video card

Hello i recently upgraded my pc with new video card (asus engtx570 directcu ii gtx 570) the problem is that main board(MSI H55M-E23) is not detecting video card, so here is what happens when i turn the pc on it starts to beep 1long beep and 2 short beeps. First i thought it might be power suply so i bought new power suply with 700w and still the same thing happens, then i tryed with LC850w and same thing so i guess the power supply is not the problem. I removed rams and tryed with 1 stick, i have 4 different sticks and same thing happened with each stick. i tested the videocard on different mainboard (ASUS P5Q PRO and ASUS P8H67-M PRO REV. 3.0) and videocard worked fine. i tested my mainboard H55M-E23 with sapphire ATI HD 6950 and it worked too so the pci slot is ok, and now i dont know what to do more i tested all things possible. So what is the problem? my mainboard does not want to detect videocard (asus engtx570 directcu ii gtx 570) 3beeps ( 1long and 2 short) PLEASE HELP!

CPU: Intel® Core™ i5-760 Processor Clock Speed 2.8 GHz Max Turbo Frequency 3.33 GHz
Main Board: Msi h55m-e23 Bios: AMI BIOS Version 17.4
Video Card: Asus GeForce ENGTX 570 Direct Cu II
Memory: Kingston 1x2GB 1333MHz DDR3 CL9 DIMM 1.5V
            Apacer 1x2GB 1333Mhz DDR3 CL9 1.5V
PSU: LC 850W Arkangel LC8850, 140mm FAN, V2.2
850W max., ATX V2.2, Free-Plug cable-Management, Active-PFC, 3 x PCI-Express, 4 x +12V: 60A, S-ATA,
+3,3V: 30A
+5V: 28A
+12V1: 18A
+12V2: 18A
+12V3: 18A
+12V4: 18A
HD: Seagate Baracuda 7200 - 320GB
Windows 7 x64
For the memory ( i did try with only 1 stick at the time... they go well together with my other card Sapphire ATI HD 6950)

Similar Messages

  • Z77A-G45 will not detect video card.

    I though that I was having trouble with a new gtx 760sc, so I RMA'd it.  On-board video works fine.  Still can't detect video card.  Bought a new power as well(antec HCG-750).  After i received the new video card and still had the same issues I tried out other video cards.  Tried two different nvidia cards.  One was a 4 series and one a 5 series.  Tried in both pci-e slots,  and yes the correct power cables were plugged in. 

    CPU looks fine. 
    Was finally able to breadboard the thing today. Had the same issues at first.  Then I tried the third  pcie slot and got post.  This one is pcie2.0, so I tried the other slots again.  Was able to get the 760 to boot on th second pcie slot.  Put the mb back in the case and lost boot on card again. Reseated, same issue.  Breadboarded and was able to get the card to post.  Still no post in case.  Can't see what could be causing a short.  Rearranging the risers right now to see if is one of the risers causing a short, or maybe not enough clearance.  Any other suggestions would be appreciated.

  • Photoshop CS5 64-bit does not detect Video Card

    I just updated from CS4 to CS5. I have a core i7 with an ATI HD 5700 series graphics card with the most recent driver 10.9. Photoshop is also updated to 12.0.1. For some reason, only the 64-bit version does not detect the graphics card. Photoshop CS4 64-bit and Photoshop CS5 32-bit see the graphics card fine. I noticed a few others have had the same issues. Has this problem been addressed yet? If not, is there a workaround?

    It's a recently-reported issue with Catalyst 10.9 on the Radeon 57xx.
    See this thread:  http://forums.adobe.com/message/3184458
    -Noel

  • Lumia 625 does not detect MicroSD cards, please he...

    My Lumia 625 does not detect MicroSD cards when inserted.
    I have tried powering off/on.
    I have tried formating them in my PC.
    I have updated my phone to 3050.0000.1334.0007
    I have tried a Kingston 64GB SDXC Class10
    I have tried a Sandisk Ultra 64GB SDXC Class10
    I have tried formatting the cards in various ways including exFAT / FAT32 / FAT64 etc.
    The only progress i made was when i tried formatting in NTSC and after inserting the card i recieved a message saying "incomattable formatted card inserted, do you whish to format the card in a compattable format?" After choosing yes, the phone formatted the card and then the card was undetected...
    This was confirmed by checking the card in my PC, which confirmed that the card had been formatted using exFAT, which i believe is the correct format for the phone/card.
    Clearly the phone is somehow detecting and writing to the card and the card is functioning properly, except that the phone does not detect that the card exists as expanded memory and will not allow me to use it.
    Any help with this would be really appreciated!
    Becoming quite frustrated now...   

    Hi Pepperami33,
    Have you tried to perform a reset? It will delete all your data so backup is required. See this link: http://www.windowsphone.com/en-us/how-to/wp8/basics/back-up-my-stuff for the steps on how to backup your files. After creating a backup, go to Settings > About > Reset your phone.
    If the reset will not work, it is best to have your phone checked by our care point. Visit www.nokia.com/support for more info about the repair process.

  • Aperture does not detect CF Card

    I am using Aperture 2 with my Canon EOS 30D. I used 2GB Sandisk CF cards and have had no issues ever. Recently I bought a 4GB and 16GB CF card and for some reason Aperture/Mac does not detect these cards. When I connect my camera via USB to my macbook, and click import, it does not show my Canon as a drive available to choose pics from. With my 2GB card it does.
    Any ideas?

    Does the card show up in the Finder? I suspect this isn't an Aperture issue.

  • Ricoh PCIe SDXC/MMC Host Controller does not detect SD cards

    Hi,
    My Lenovo Thinkpad X230 has an integrated 4-in-1 SD card reader (SD/SDHC/SDXCMMC), but it does not detect any card I insert. The two cards I have are working correctly under my sister's MacBook. My kernel version is 3.6.10. Here's the output of a few commands :
    lspci -k
    00:00.0 Host bridge: Intel Corporation 2nd Generation Core Processor Family DRAM Controller (rev 09)
    Subsystem: Lenovo Device 21fa
    00:02.0 VGA compatible controller: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller (rev 09)
    Subsystem: Lenovo Device 21fa
    Kernel driver in use: i915
    00:14.0 USB controller: Intel Corporation 7 Series/C210 Series Chipset Family USB xHCI Host Controller (rev 04)
    Subsystem: Lenovo Device 21fa
    Kernel driver in use: xhci_hcd
    00:16.0 Communication controller: Intel Corporation 7 Series/C210 Series Chipset Family MEI Controller #1 (rev 04)
    Subsystem: Lenovo Device 21fa
    Kernel driver in use: mei
    00:19.0 Ethernet controller: Intel Corporation 82579LM Gigabit Network Connection (rev 04)
    Subsystem: Lenovo Device 21f3
    Kernel driver in use: e1000e
    00:1a.0 USB controller: Intel Corporation 7 Series/C210 Series Chipset Family USB Enhanced Host Controller #2 (rev 04)
    Subsystem: Lenovo Device 21fa
    Kernel driver in use: ehci_hcd
    00:1b.0 Audio device: Intel Corporation 7 Series/C210 Series Chipset Family High Definition Audio Controller (rev 04)
    Subsystem: Lenovo Device 21fa
    Kernel driver in use: snd_hda_intel
    00:1c.0 PCI bridge: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 1 (rev c4)
    Kernel driver in use: pcieport
    00:1c.1 PCI bridge: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 2 (rev c4)
    Kernel driver in use: pcieport
    00:1c.2 PCI bridge: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 3 (rev c4)
    Kernel driver in use: pcieport
    00:1d.0 USB controller: Intel Corporation 7 Series/C210 Series Chipset Family USB Enhanced Host Controller #1 (rev 04)
    Subsystem: Lenovo Device 21fa
    Kernel driver in use: ehci_hcd
    00:1f.0 ISA bridge: Intel Corporation QM77 Express Chipset LPC Controller (rev 04)
    Subsystem: Lenovo Device 21fa
    Kernel driver in use: lpc_ich
    00:1f.2 SATA controller: Intel Corporation 7 Series Chipset Family 6-port SATA Controller [AHCI mode] (rev 04)
    Subsystem: Lenovo Device 21fa
    Kernel driver in use: ahci
    00:1f.3 SMBus: Intel Corporation 7 Series/C210 Series Chipset Family SMBus Controller (rev 04)
    Subsystem: Lenovo Device 21fa
    Kernel driver in use: i801_smbus
    02:00.0 System peripheral: Ricoh Co Ltd PCIe SDXC/MMC Host Controller (rev 07)
    Subsystem: Lenovo Device 21fa
    Kernel driver in use: sdhci-pci
    03:00.0 Network controller: Realtek Semiconductor Co., Ltd. RTL8188CE 802.11b/g/n WiFi Adapter (rev 01)
    Subsystem: Realtek Semiconductor Co., Ltd. Device 8195
    Kernel driver in use: rtl8192ce
    lsmod | grep sd
    sd_mod 29560 4
    scsi_mod 133434 2 libata,sd_mod
    sdhci_pci 10834 0
    sdhci 23695 1 sdhci_pci
    mmc_core 82791 2 sdhci,sdhci_pci
    Nothing new happens if I type dmesg | tail after inserting a card.
    I didn't find any solution after searching on Google, but it seems there are a few other people experiencing the same problem as me. I haven't actively tried anything yet.
    I don't have much experience when it gets to this kind of things, so I hope there are some of you who can help me.
    Thank you!
    Last edited by Fayden (2012-12-22 05:13:09)

    In case someone else has the same problem, there's actually a package in the AUR that fixes the problem : https://aur.archlinux.org/packages/ricoh-e823-fix/
    Install it and enables it with systemd and it should work correctly!

  • Can not detect wireless card

    WRE54G / Win XP SR2
    My laptop and PDA can connect to the network wirelessly with no problems.
    Trying to connect my WRE54G to my network. On every attempt at AutoConfigure nothing happens. Have disabled router security and 'SPI Firewall' (whatever that is). Still nothing. Have disabled router security and 'SPI Firewall' (whatever that is), and McAfee Firewall. Still nothing. I have moved the WRE54G to within ~4 feet of the router and tried everything again. Still nothing.
    I have tried Setup but when I hit 'Next' I get the popup "Can not detect wireless card."
    Have tried a reset and have unplugged/replugged the WRE54G. FWIW, the WRE54G 'Link' light blinks blue once for about a second and turns a constant red. The 'Activity' light blinks blue twice quickly about every 5 seconds. Nothing on my PC shows any response.
    What is the wireless card that can't be found? The WRE54G?
    How do I resolve this?
    33#44

    this worked for me too.  Although I was never able to use the cisco install wizard successfully.  I am using WEP security on my access point.  I took the following steps.
    1.  From laptop, connect to network wirelessly with WEP security settings in place
    2.  From laptop, open browser, go to: 192.168.1.1, select wireless security, disable wireless security
    3.  From Range Extender, hold auto-configure button.  It took me multiple attempts (~5) and it connected so the 'Link' light changed from red to a consistent blue.
    4.  From laptop, disable security for the access point (via control panel, wireless network connection settings)
    5.  From laptop, connect to wireless access point (via control panel, wireless network connection settings).  test internet connection.  Internet should work.
    6.  From laptop, access range extender web utility.  open browser, got to 192.168.1.240, enable security, input desired WEP security settings/passphrase. 
    7.  From laptop, enable wireless security for the access point.  from browser, go to 192.168.1.1, select wireless security and enable it.  use the same settings from step 6 (from the range extender).
    8.  From laptop, update wireless adapter settings to connect using the same security settings (eg. passphrase) from step 6/7.
    range extender, access point and wireless adapter/laptop should all be connected.

  • Msi x99 gaming 9 ack does not detect capture card when using with xsplit

    msi x99 gaming 9 ack does not detect capture card when using with xsplit
    i install every but still it does not work.

    Hi
    It wasn't hard to find your motherboard version:
    http://www.msi.com/support/mb/Z68AGD80_B3.html#down-bios
    Since your BIOS is v20.1, it couldn't be G3 
    Apart from checking BIOS, you can only check motherboard or moth...

  • K8N Neo Platnium not detecting PCI cards

    This is my second K8N Neo 2 Platnium board.  Both of them have failed to detect the cards in the PCI slots.  I know for sure that both of the cards work in my old system since i had to switch back to my old parts when i was getting my first board RMAed. The two cards are:
    Creative Audigy 2 ZS sound card
    Promise 100TX ATA controller card
    I've disabled the onboard audio in BIOS, but that wouldn't matter since its not detecting either card.  I've done the "search for new hardware" wizard in Windows XP Pro w/ SP2 and all updates as of Sept 26, 2005.  I've tested it both inside and outside of the case so it isn't shorting. 
    I am P*ssed off.
    Frankly, this is unacceptable.  Not only that, but upon inspecting the second board right out of the package, I saw that it has been ran before.  Long enough for dust to collect on some caps and on the SATA slots around the nForce chipset.  Also, there were little rings around the mounting holes from where screws have obviously been screwed in before.
    Not to mention i had to call them to send my RMA out.  Website said it was ready to be shipped on 9-14-2005, I called on 9-20-2005, and it finally shipped out the following day.
    I am not happy with my MSI purchase.  This coming after hearing so much good about this company.  Unless this problem is resloved I doubt I'll ever buy another one of their products again.

    I had a similar problem with a 945p neo platinum board.  Anything I plug into any PCI slot didn't detect.  I solved the problem by flashing to the latest BIOS for the board.  Now everything seems to be working fine.
    Maybe that might work for you?

  • MSI H55M-E32 will not detect Graphics card

    HI,
    I just bought a new cpu, i am using the intel intergrated graphics (on-board) at the moment. I tried installing radeon 9600 pro graphics card but the mobo does not detect it. Monitor is black screen, no boot up. btw the fan on radeon 9600pro is not spinning.
    I tried using another graphics card that i have. A creative gf4 Ti4200. no boot up on monitor as well. fan not spinning.
    How to get the motherboard to detect the graphics card...??? my computer does not detect any graphic cards..
    I like to get radeon 9600pro working ...How to do it?
    My comp:
    Motherboard - MSI H55M-E32
    cpu - Intel i3 540
    mem - kingston 2gb ddr3 pc1333
    psu - Vios 450w psu
    os - win xp sp3
    vid - Ati radeon 9600pro ,  creative gf4 Ti4200
    Thanks.
     

    and the other one is an ancient agpx 4 card as well
    YOU DO NOT HAVE AN AGP SLOT TO PUT THEM IN!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

  • Detect video card in 32 and 64 bit.

    How can I get both the 32 and 64 bit versions of CS6 to detect my graphic processor (AMD Radeon HD7700) for GPU usage in Win 7 ? Cuiurently, it is only seen in 64 bit.

    Thanks again Chris.
    I again completely uninstalled the AMD Catalyst and drivers and reinstalled the latest one from their site. I am still unable to select Again, the card is not detected in the 32 bit version of CS6 and is readily available in 64 bit. Also very interesting is what the System info shows.  i.e. Windows XP and yet I installed the lastest version of CS after I had updated to Win 7 on a new computer. 
    Here's what the system info shows in CS 6 32 bitr ..
    Adobe Photoshop Version: 13.0.1 (13.0.1.2 20130522.r.24 2013/05/22:21:00:00) x32
    Operating System: Windows XP 32-bit
    Version: 5.1 Service Pack 3
    System architecture: Intel CPU Family:6, Model:10, Stepping:9 with MMX, SSE Integer, SSE FP, SSE2, SSE3, SSE4.1, SSE4.2, HyperThreading
    Physical processor count: 4
    Logical processor count: 8
    Processor speed: 3403 MHz
    Built-in memory: 16344 MB
    Free memory: 12841 MB
    Memory available to Photoshop: 3255 MB
    Memory used by Photoshop: 62 %
    Image tile size: 128K
    Image cache levels: 4
    OpenGL Drawing: Disabled.
    OpenGL Drawing Mode: Normal
    OpenGL Allow Normal Mode: True.
    OpenGL Allow Advanced Mode: False.
    OpenGL Allow Old GPUs: Not Detected.
    Video Card Vendor: ATI Technologies Inc.
    Video Card Renderer: AMD Radeon HD 7700 Series
    And here's what it shows in CS 6 64 bit version ...
    Adobe Photoshop Version: 13.0.1 (13.0.1.2 20130522.r.24 2013/05/22:21:00:00) x64
    Operating System: Windows 7 64-bit
    Version: 6.1 Service Pack 1
    System architecture: Intel CPU Family:6, Model:10, Stepping:9 with MMX, SSE Integer, SSE FP, SSE2, SSE3, SSE4.1, SSE4.2, HyperThreading
    Physical processor count: 4
    Logical processor count: 8
    Processor speed: 3403 MHz
    Built-in memory: 16344 MB
    Free memory: 13122 MB
    Memory available to Photoshop: 14730 MB
    Memory used by Photoshop: 71 %
    Image tile size: 128K
    Image cache levels: 4
    OpenGL Drawing: Enabled.
    OpenGL Drawing Mode: Advanced
    OpenGL Allow Normal Mode: True.
    OpenGL Allow Advanced Mode: True.
    OpenGL Allow Old GPUs: Not Detected.
    Video Card Vendor: ATI Technologies Inc.
    Video Card Renderer: AMD Radeon HD 7700 Series
    In my powerful mind, it appears that CS will only see the card in the 64 bit version. Not that it's a big problem with easy work-arounds but it puzzles me and I was hoping that someone else has had a similar experince and was willing to chime in.
    Appreciate your time.

  • Cannot Detect Video card (Radeon 6750m)

    Dear sir,
    I would like to know why my laptop cannot detect my video card (Radeon 6750m). It only shows the built in graphic card intel. I already try to use system restore and reset to original factory mode. It will appear but after updating my drivers and reboot my laptop.  My laptop cannot detect again the video card.
    Please help me resolve this problem,
    for you reference
    http://tinypic.com/r/2it67ex/8 
    This question was solved.
    View Solution.

    You will have to enable the Radeon HD adapter by using the Catalyst Control Center.
    Once you do that the adapter will appear in the Device manager.
     If you are using the Intel HD graphics, only the Intel graphics will be seen in the Device Manager.
    I know that may sound strange, but it is one of the pecularities of having a switchable graphics capable notebook.
    The following URL goes to an overview of switchable graphics. Take a few minutes and read it. It should help make understanding it simpler.
    http://support.hp.com/us-en/product/HP-Pavilion-dv4-Entertainment-Notebook-PC-series/5048648/model/5...
    Do not instal the Intel graphics driver seperately!
    Doing that breaks the switchable graphics feature.
    Only install the HP ADM ATI graphics softpaq. It will install both drivers automatically and let you use the switchable graphics featrure og your notebook.
    ****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
    2015 Microsoft MVP - Windows Experience Consumer

  • ITunes/QT not using video card

    I'm configuring a PC to attach to my TV, and have been downloading the HD episodes of Battlestar Galactica Season 4. The video playback quality is awful. Very jerky, the computer can't keep up.
    I thought it was the video card, and upgraded to an Nvidia 9600, which should be MORE than adequate. I also installed the NVidia system tools which includes the system monitor application. System monitor overlays various metrics of CPU, GPU, memory, etc usage on the screen over an application.
    As I started to play the video, the monitors indicated the CPU usage spikes to 100%, but the GPU usage stays at around 1-2%. That is, the decoder is CLEARLY not using the GPU.
    I have gone into the quicktime control panel and enabled all of the DirectDraw options.
    Configuration:
    Windows XP Pro SP3
    DirectX 9.0c
    Nvidia 9600
    Pentium 4 3.2 Ghz
    800 MHz FSB
    2.5 GB RAM
    How do I get the Quicktime / iTunes decoder to use the GPU to play back video?
    Lee Silverman

    Make sure you back up your iPad and follow the instructions on how to set it up as a new device.
    Hope this helps.

  • IPhone 3GS can not detect SIM Card after upgraded to iOS 6.0.1

    Guys I really need your advice please...
    I upgraded my iPhone 3GS 32GB from iOS 5.1.1 to 6.0.1 a couple weeks ago and since then it can not detect the my SIM Card ever. Before it's been upgraded, the phone was working just fine, but now it's just like a gameboy to me. I've been trying to find solution and some stores want me too pay quite amount of money to fix it but I refused.
    By the way, it has been jailbroken with RedSnow, tethered of course... and all the features are working perfectly, the WiFi is working, syncing is working, Bluetooth is working, downloading apps from App Store is okay, but only Mail and Safari won't work. I haven't got a chance to go to Apple Service Center to fix it yet, but the store I went said that Apple may say the same.
    Thanks in advance.
    ps to Admin: I'm a newbie, so if I posted this in the wrong room please forgive me.

    rzulfikar wrote:
    Thanks Chris for your solution.
    But just for you know that I bought Apple to get the 'after service', they should've warn the users not to upgrade to a higher OS if it can caused the phone 'dead'. Mine was totally unusable when it's just been upgraded. It stayed in the recovery mode and couldn't be restored. So I brought it to the nearest store and they did that to me, and eventually the phone is working, only it cannot detect my SIM Card...
    The problem is not about upgrading an iPhone to a newer version of iOS.  Your problem was upgrading a hacked phone, one of the well known consequences of which is re-locking and/or bricking the entire device when restoring in iTunes.  You chose to hack your phones firmware and operating system, so you must accept the consequences of going outside the bounds of normal use that Apple prescribes and supports.
    Had you not hacked it in the first place, you likely would have never had a problem, and if you had, Apple would have offered support to deal with it.  Your choice, your decision, your consequences.

  • Windows 7 Not Detecting Nvidia Card. Gt70 670MX GPU.

    So I downgraded from windows 8 to windows 7 and have recently discovered my computer is using the Intel HD 4000 instead of the correct Nvidia 670MX. When I disable the Intel Hd the system restarts and displays stuff but the nvidia program says it can not detect an nvidia gpu. When I re enable, the nvidia driver detects the gpu but does not use it (directx diag shows the intel hd 4000). Any help would be greatly appreciated because I would hate to have to reformat back to windows 8.

    Dxdiag will not use the NVidia card. Ignore it, as it's stupid to rely on it for anything.
    You can't use the NVidia card 100% of the time. You need to use the Intel HD4000 when you're not gaming, as that's what it's meant for with Optimus.
    Sometimes you need to make sure that it is switching to the NVidia card when you need it for a game or for whatever it is you're doing that you need it. This usually involves making a custom profile within the NVidia control panel. I have not played a game yet where I did NOT have to add it. I'd add it anyway, just to be sure that it's working correctly. Once you add the game, and tell it to use the NVidia high performance adapter (instead of the Intel integrated adapter), it should work just fine and hopefully increase your FPS.

Maybe you are looking for