Had a weird problem with..
my new Itunes phone.
I was on a call and it seemed like the call dropped.. Hmmmm
I looked at the phone... time still counting... then it starts ringing
Then press the call button and nothing happens... just keep ringing...:mad:
Next press end/stop.... it keeps ringing.... next I press call it calls my last dialed number
now I hit end/stop that call.... it keeps ringing... about
3 minutes it keeps ringing
Holding the end button to turn off phone... nothing happens.... WTH
Lastly i pull off the Battery cover and and pull the battery... it dies
Put it back together... everything seems fine... My caller said his end of the line was a Beeeeeeeep noise... so he just hung up
Is this the notorious Bug with 1 run production item ?
I hope this does not happen when I'm on a client call... That ringing was weird
and would not stop.....
Well after a 1hour 15 minutes.... and 5 service people... I very MAD
http://direct.motorola.com/hellomoto/Motosupport/source/RokrSupportUpdate.asp
If you only have a MAC you can not do the software update...
The only service center is 45-50 mile away...2+ hours rt
I'm past the 30 day exchange with cingular... can do that... on the 21st a got my second rokr
I have left msg with a couple friends with PC to do the update through their computer...... MAD
Very disappointing...... New phone... with Itunes... Itunes is a MAC program...
and I can do a software update because the software is only PC comp.
Apple should not have made the phone with out FULL compatability to updates with MAC
Similar Messages
-
Had 1 weird problem with battlefield 3 with my gt70
well i bought this game and had no problems, but when i started a co op game mode my laptop just crashed and had blue screen, i restarted my pc and everything its ok, but now im having green textures problems with BF3 and only BF3 like this
i already tried:
1.- repair tool of the game.
2.- reinstall the game (twice).
updated my intel and nvidia graphics card
downdate my intel and nvidia graphics card
tried to update my bios but looks like my usb of 4gb is not compatible (no drivers found error).
Im thinking to re install all windows, what do u guys think???? or theres something else that i should try???Quote
tried to update my bios but looks like my usb of 4gb is not compatible (no drivers found error).
what is this error? can you tell the exact message received and where is received?
Quote
Im thinking to re install all windows, what do u guys think? or theres something else that i should try??
think your vga has overheating problems -
Apple Banned me, because of a very weird problem with my "Factory Unlocked"
Hi Everybody! Im having a very weird problem with my unlocked iphone 4.
First of all, i would like to apologize because of my english, is not very good. My native language is Spanish.
Well.. Im from Mexico, and here we can buy the iphone Unlocked on the Apple Online Store.
Here's my problem. Apple has exchanged my iphone 3 times.
I returned the iphone the first time because the screen was totally yellowish, other than that everything was working great!, that was by the end of September.
On October 20th, i recieved my second iphone, and then a bigger problem started .
Before i continue, let me give you this information: here in Mexico we have basically 3 cell phone companies
1.- Telcel
2.- Movistar
3.- Unefon
OK, now on october 20th, i recieved my second iphone, and then procced to activate via itunes using my UNEFON sim card (microsim).
And every time i tried to activate it, only got this message onscreen:
http://i148.photobucket.com/albums/s2/jorgelomeli/Screenshot2010-10-29at24915PM. png
I though something was wrong with my brand new factory unlocked iphone 4.
I have 4 more simcards from my brothers (they all had iphone 4 too)
I tried telcel sim card, and i could activate my iphone. Then i insterted the Movistar microsim, and it worked too!! But then when i put the Unefon sim, the itunes logo inmediatly appears on the screen asking to activate on itunes, and when i tried that, the only response i got was the image above saying " The Simcard inserted on this iphone does not appear to be supported"
Weird thing here is, that, when i put my Unefon sim card on my brothers iphone 4, it worked great! on all of them, internet 3g, phone, wireless , evrything!
I called apple support, and they exchange the iphone for another one.
I recieved the third iphone on October 29. Last friday. and guess what? SAME PROBLEM! different serial number, same week production (week 42) but exactly the same message on itunes.
Very, very frustrated, i called apple again, and after 1 hour with thechnical support, they told me " We are sorry, but we can only offer you, your money back, NO MORE EXCHANGES FOR YOU"
I said why?... i dont want my money back! i want an UNLOCKED iphone!, but they refuse to give me another iphone.
When i asked techincal support, why my unefon sim card worked great on all three of my brothers iphone but not on mine, he just told me, "I really dont know, i guess they just got lucky" ****, this answer put all my trust i had on apple products for years, right on the garbage.
Since they refused to give me another iphone, i accepted my money back, and inmediatly after i finished the call, i asked my brother to buy me one more time an iphone 4 using his name, and his credit card. Now i have to wait until November 8-12 to recieve my new iphone, hoping this time i get a REAL UNLOCKED iphone, and not a partially unlocked iphone.
btw. i even went to Unefon costumer service and bought a new prepiad line, with a new microsim, just to be 100% sure that this problem is not because of the sim. And again didnt worked on my iphone, but it worked on any of my brothers iphone4.
Serial numbers of the 3 iphones:
79039C0U* (this one worked great with Unefon, only problem was yellow screen)
85042GR4*
81042FJB*
What do you suggest me? any info would be really aprecciated
FYI i also restore 4 times the last iphone and nothing seemed to work, i use 3 different computers, Macbook Pro, iMac, and an Hp with Windows 7, and the same message on all three computers.
Wierd thing also, one of my brothers bougth an iphone 4 this last week too, but he bought the 16Gb not the 32Gb. His iphone production week is 42 also! and when i put my Unefon sim in his iphone works great!
I dont know what else i can do, I just need to have faith that my new iphone coming this november will be real unlocked, but what if i'll recieve an iphone and then the same problem?? time for android? just kidding really guys, what can i do? anyone with similar problem like me? i dont wanna use Telcel or Movistar, i wanna use Unefon, and thats why i bought an Unlocked iphone
btw: jailbreak is not a solution for me, because i always like to use legal software on all my apple products, and because of the warranty.According to http://support.apple.com/kb/HT1937, there are two official carriers in Mexico (Movistar and Telcel) and neither carrier offers an unlocked phone.
-
Hiya, I've got a weird problem with my iPhone4. On the 'home page' of my iPhone the mail symbol tells me there's a new mail waiting for me. However, there's no new mail to be found. Does anyone know what the problem is? Thanks
This response is a little late as I just read about your problem. I have a 2012 Dodge Charger and a 2012 Chrysler Town and Country and both worked flawlessly with the iPhone 5s my wife and I had. However, we just upgraded to the iPhone 6 and Uconnect will receive calls but you cannot answer them. You can callout successfully, however. the annoyance being the inability to answer incoming calls in the HandsFree mode.
-
Weird problems with CSS being applied to JSF pages
I have this really weird problem with my CSS rules being applied to my JSF pages. My CSS rules don't get applied unless one of the following two things happen:
- A page is reloaded (by redirecting to itself, or if there were validation errors)
- The previous page in the history had the same relative reference to the same CSS file.
If a page is newly loaded, and the previous page did not have that same CSS reference, the CSS styles will not show up. Also, if the above is true, and the page is reloaded by JSF, the CSS styles show up.
Now, my problem could be solved if I put all JSP files in the same level, but the display of the first page would still be without the CSS style applied.
Is this known behaviour? And if it is, does it have anything to do do with the way JSF handles URLs (always one level back)? Help and input is kindly appreciated!Dude,
I tried the same
<link rel="stylesheet" href="<h:outputText value="#{facesContext.externalContext.requestContextPath}"/pages/css/default.css" />
and I got the following Jasper exception.... pointers plz ??
=============================================================
2005-08-24 14:18:55,937 [http-8080-Processor25] ERROR org.apache.catalina.core.ContainerBase.[Catalina].[localhost].[mydemo].[FacesServlet] - Servlet.service() for servlet FacesServlet threw exception
org.apache.jasper.JasperException: /myproj/eventCrit.jsp(8,78) Unterminated <h:outputText tag
at org.apache.jasper.compiler.DefaultErrorHandler.jspError(DefaultErrorHandler.java:39)
at org.apache.jasper.compiler.ErrorDispatcher.dispatch(ErrorDispatcher.java:405)
at org.apache.jasper.compiler.ErrorDispatcher.jspError(ErrorDispatcher.java:130)
at org.apache.jasper.compiler.Parser.parseOptionalBody(Parser.java:1049)
at org.apache.jasper.compiler.Parser.parseCustomTag(Parser.java:1367)
at org.apache.jasper.compiler.Parser.parseElements(Parser.java:1564)
at org.apache.jasper.compiler.Parser.parseBody(Parser.java:1793)
at org.apache.jasper.compiler.Parser.parseOptionalBody(Parser.java:1060)
at org.apache.jasper.compiler.Parser.parseCustomTag(Parser.java:1367)
at org.apache.jasper.compiler.Parser.parseElements(Parser.java:1564)
at org.apache.jasper.compiler.Parser.parse(Parser.java:126)
at org.apache.jasper.compiler.ParserController.doParse(ParserController.java:211)
at org.apache.jasper.compiler.ParserController.parse(ParserController.java:100)
at org.apache.jasper.compiler.Compiler.generateJava(Compiler.java:146)
at org.apache.jasper.compiler.Compiler.compile(Compiler.java:286)
at org.apache.jasper.compiler.Compiler.compile(Compiler.java:267)
at org.apache.jasper.compiler.Compiler.compile(Compiler.java:255)
at org.apache.jasper.JspCompilationContext.compile(JspCompilationContext.java:556)
at org.apache.jasper.servlet.JspServletWrapper.service(JspServletWrapper.java:293)
at org.apache.jasper.servlet.JspServlet.serviceJspFile(JspServlet.java:291)
at org.apache.jasper.servlet.JspServlet.service(JspServlet.java:241)
========================================================= -
Weird problem with my 648 MAX-L board
Hello friends:
I recently brought a 648 MAX-L board and had a weird
problem: every time when I power on the system, it
could not find my hard drive (Seagate 80G/7200 rpi).
But when I reboot, the hard drive is found and the system could then boot without problem. So the problem
is that I have to reboot one every time I'd start my
PC. This is weird. I suspect something is wrong with
BIOS battery?if you disable fast boot does it start first time
a weak psu may be related to this,drive not spinning up fast enough first time -
Weird problem With my Audigy 4
Hi all, I have a weird problem with my audigy 4. When I install the Nvidia IDE and Sata driver for my motherboard, I get sound problem in BF2, It glitches, I don't here my gun, well it's all ****ed up. Does anyone know why?Thanks in advance.
I have had every iphone model ever made. I have never had a problem like this before. It appears that there are small spots all over the screen. Not to be confused with the "yellow spots" other iphone 4 user have been reporting due to the glue not drying before they reached the customer. This is a different type of spot. I would compare it to a petrie dish that scientist test for things in.
The only thing I can think of is something is happening with the coating over the glass (oleophobic coating maybe braking down?). It only happened on the front screen and not the back glass. You can get the spots to go away when you use a micro fiber cloth to remove the natural oil from your face against the phone. The minute you start using the phone again, they appear. They are kinda annoying and make your phone screen look dirty and have a weird glare in it when your in the sun.
I made an appointment tomorrow to go to the apple store to see what they can tell me. Hope fully its nothing major. The worst thing that could happen is the phone gets replaces by another. Ill keep everyone update. -
Weird Problem With My Ipod. Can you help?
I'm having a weird problem with my ipod and I hope someone here can help. I have a Nano, 4 GB. I got it back in June, so I haven't even had it 6 months yet. Ever since I "updated" the software, it hasn't worked right. It kept freezing on me and saying I had no songs on it. Finally when I reset it through iTunes and loaded brand new songs in it, it froze half way loading. I loaded it for a 3rd time and now it's making a weird alarm sound for no apparant reason. The buttons are stuck and I can't shut it off. It just keeps making this sound and it won't stop. When I reset it by holding menu & select, it resets, is fine for about 20 seconds, then starts back with this alarm. Is there anyone that can help me with this?
Mine was the similar condition.
When I reset iPod nano by holding menu & select, it resets, is fine for about 20 seconds, then starts back to the screen of black and white state.
It keeps endless loop.
It happened on the way of iPod nano firmware update to 1.1.1. from 1.0.2.
Instead of completing firmware updated, the above symptom happend in my case.
I could exit the above condition by pressing both of SELECT &
PLAY button 5-10 seconds long.
It manually change DISK Mode.
The following subject was useful for me.
Re: Disk Mode
Posted: Apr 27, 2006 8:12 PM in response to: thestantos -
When I print a photo to my epson printer, it comes out larger than the original photo - so the photo prints beyond the borders. Tried readjusting all sorts of things but nothing helps. I had this same problem with my Canon. any ideas?
Crop to the print size before pringing
LN -
Hey, I had met a problem with installation. Can any one help me?
Hi everyone, I'm an user of Windows 7(64 bit),
I had just download "Master Collection CS5.5"
Everything are fine but Adobe Acrobat Professional can't install on my computer.
There are the details..:
Exit Code: 6
-------------------------------------- Summary --------------------------------------
- 0 fatal error(s), 4 error(s), 1 warning(s)
WARNING: DW066: OS requirements not met for {AC76BA86-1033-F400-7760-000000000005}
----------- Payload: {AC76BA86-1033-F400-7760-000000000005} Acrobat Professional 10.0.0.0 -----------
ERROR: Error 1324.The path R嶰up廨er un document num廨is?sur un multifonction.sequ or the volume is invalid. Please enter it again.
ERROR: Install MSI payload failed with error: 1603 - 安裝時發生嚴重錯誤。
MSI Error message: Error 1324.The path R嶰up廨er un document num廨is?sur un multifonction.sequ or the volume is invalid. Please enter it again.
ERROR: DW050: The following payload errors were found during install:
ERROR: DW050: - Acrobat Professional: Install failed
ThanksRe: Hey, I had met a problem with installation. Can any one help me?
This worked for an English version and the concept should work with all Adobe programs - new or old (hopefully in any language). My guess is that you have/had an older version of Acrobat/Reader on your computer hard drive that needs to be *completely* removed first. Uninstall the new (and any old) Acrobat; then try using the "kb2..." guideline link below before reinstalling the new Acrobat. I am including the lengthy instructions in order to help others with more extensive installation problems. Good luck!
I live on a fixed income and use CS for a hobby. I had problem installing Adobe Creative Suite (CS1) to Windows 7 64-bit Pro on my new computer. Also installed Adobe Photoshop LR3. What I learned: All Adobe products (Flash, Acrobat/Reader, Photoshop, Creative Suites, etc.) leave a VERY pervasive footprint on your hard drive. Logic finally worked for me.... think of building a house; there is an order you have to do things in. First, you have to clean the area before laying the foundation; then you have to build the framework before you put the roof on. You cannot install an older program over ANY newer program; and you will sometimes have a problem installing a newer program containing Flash, Reader, etc. unless you "erase" the older versions of Flash, Reader beforehand. If installing older programs, do a Custom/Manual install; do not install older versions of Flash, Reader, etc. packaged with your Adobe software.
SOLUTION (not easy, but it works):
I first tried this; it did not solve my problem (but, if applicable, may help others). http://windows.microsoft.com/en-us/windows7/Make-older-programs-run-in-this-version-of-Win dows
Before doing anything, make document and any database/presets/cache back-ups beforehand (keep notes on their designated location*); manually create a System Restore point. (Be prepared to reinstall Windows if necessary - I didn't have to.)
Completely and meticulously eradicate (clean) your hard drive of ALL Adobe programs [uninstall, remove remaining folders, and remove only the registry entries that have the Adobe name attached (unless you are an expert and fully understand the other entries)]. Use this as a guideline http://kb2.adobe.com/cps/400/kb400769.html
Do a Custom/Manual reinstall of all your Adobe products *in order of release dates* (OLDEST first).... do not include Reader, Flash, etc. If your CD will not automatically run at this point, click "Open folder to view files" (use Computer/Windows Explorer, if necessary). Click "Adobe Creative Suite (or your desired program) ==> Setup.exe" (IMPORTANT: Make sure that Reader, Flash, etc. are unchecked.)
After each of your desired Adobe programs are installed, test to insure they boot up. Then download the latest Reader, Flash, etc. apps and install them (I did this in order of release date - oldest first). Do test boot(s) again.
Copy/Paste your document and any database/presets/cache back-ups into the appropriate folders (*this will vary depending on your programs and your filing system).
It has been four weeks and all my Adobe programs work flawlessly - system is stable, no problems! -
I have a problem with iphoto (have a mac book pro): the icon in the dock appears with a question mark, and the application is gone!!! Can someone tell what's going on? Yesterday I had the same problem with itunes: I downloaded the last version (it's free), but I cannot do the same with iphoto, and more important: I need to know what is happening!!! Please help me!
Applications should not disappear all by themselves.
If they are then that coud indicate serious problems with your hard drive.
Backup everything up as quickly as possible.
Using Disk Utility verify your system disk.
Allan -
Hi, I have an Iphone 3g that is "Not" jailbroken, nor do I want it to be jailbroken. However, I had been having problems with it shuting down and not starting again. So, I tried to update and restore only to get an "error" 1015.
It is now stuck on "connect to itunes"
Any help would be great as this is a factory unlocked phoneApple in no way blocks devices.
Carriers can blacklist devices from their network. If that is what has occurred, only the carrier can remove the blacklist. This should have nothing to do with your ability to activate the device and use it as an iPod. -
I'm having a weird problem with JApplet. So first I create an Applet with this code
public class japp extends JApplet {
public void init() {
Container content=getContentPane();
JButton jb=new JButton("Hello");
content.add(jb);
}and with this in the .html file;
<html>
<body>
<APPLET CODE="japp.class" WIDTH="650" HEIGHT="500"></APPLET>
</body>
</html>
And opened it in Firefox, it worked as expected. However, when I change the code in any way, i.e.
public class japp extends JApplet {
public void init() {
Container content=getContentPane();
JButton jb=new JButton("Goodbye");
content.add(jb);
}and compile it, it still shows the old button that displays "Hello". I've tried deleting the .class file from before and recompiling, that doesn't work. What am I doing wrong?
Thanks.Reloading the page usually doesn't work. You will need to open the Java Console and clear classloader cache (x). You can also use appletviewer for testing purposes.
-
I am facing a weird problem with my iphone 4s Wi-Fi connectivity. As i connect my iphone to my office Wi-Fi, internet works in one building, but it doesnt work in the other building, although the phone shows Wi-Fi is connected in the other building. This problem was not there earlier but has occured recently. I would also like to mention that none of my other colleauges who uses iphone are not facing this issue. Please help me out!!
Assuming you entered the correct WiFi password for your network, see these articles:
iOS: Troubleshooting Wi-Fi networks and connections
iOS and OS X: Recommended settings for Wi-Fi routers and access points -
I'm with a weird problem with my OS Tiger. I have a G4/400 AGP Graphics with a Fastmac 1.5GHz processor upgrade, 1 GB RAM, 128MB video card, USB 2.0 card and a Sonnet serial ATA card. I have two HDs: one of 80GB and another one with 250GB (serial ATA) connected to the serial ATA card.
I have installed OS X Tiger in this serial ATA HD. Some weird things are happening since then. Sometimes when I shutdown my Mac, the delay is too long, all the icons disappear and the spinning wheel cursor remains in the screen for a long time until the Mac shuts down.
Sometimes when I try to open some applications, the same thing happens, the delay is long. And it happens too when I try to quit some applications. The sintom doesn't follow a rule - sometimes happen and other times it don't happen. And when I hit optioncommandesc to force quit, the application appears in the list as 'not responding', and even when I force quit it doesn't quit at all.
I already have checked the disk permissions, I have runned MacJanitor, but the problem is still there.
Any idea?Hello! Long delays are often caused by corrupt disk directories. I'd first boot from the install Tiger disc and run the repair disk routine and then repair permissions AFTER rebooting from the hard drive. Other than that I'd get Diskwarrior to keep the directories in good shape. Tom
Maybe you are looking for
-
My husband bought a new Macbook Air from Best Buy for me as a gift. While everything is great, I am having an issue with everything being under his name. I've linked it to my Apple ID and signed into my iCloud but whenever I turn on the MBA and logi
-
Hello! is there a way to make part of the text as superscript in the table of content with iwork 08 pages? for example TOEFL® -> with the ® superscripted. Thanks! Jeanny
-
I can't find the 3D tool in illustrator CS5
I'm working in a school computer with illustrator CS5 license, but for any reason I don't see the 3D section under Effects. Can someone help me? please
-
Hi Friends Scenario: There are 2 components with quanity of 100 each for header material (10 qty) .Both teh components have backflush indicator. User iwants option of doing Goods issue through MB1A also.Suppose 20 qty each is issued through MB1a by u
-
TS1702 How can i reinstall the facetime app after its been deleted ?
how do you reinstall facetime app? , was accidentally deleted