Had problems with windows 8 to 8.1 upgrade

I always got the reminder message to upgrade to 8.1 every time I turned my computer on. It always gave me the option of upgrade now, upgrade 1 hour 2 hours 3 hours 4 hours later, or remind me later. Last time I got the reminder message it didn't
give me the option of remind me later so I forced to choose 4 hours later. I contacted technical support over the phone about the issue and received remote assistance support. The guy went into the windows update center and deleted one of the updates
that he said had to do with preventing windows 8.1 from installing on my computer. So, I had to restart my computer after that and when my computer finally booted up after about a 20 to 30 minute setup process, I had windows 8.1 installed on my computer.

you should hide it not delete it, if your PC connected to the internet and Windows update set automatically it will download back the update that been deleted
or you can proceed with this method
http://www.askvg.com/how-to-disable-update-to-windows-8-1-for-free-notification-in-windows-8-store/
to going back to Windows 8, you can simply perform system restore, its free choice
but my advice just stick with Windows 8.1, and please update all the driver

Similar Messages

Fafter upgrading to mavericks,I had problems with windows 8.1, so deleated partion to start over. Everthing went fine until The fact I was using an upgrade disc instead of a bootable version. Now everthing is loocked up and none of the hotkeys work

after upgrading to mavericks, I had problems with windows 8.1. I deleated the partition to start over. Upon try ing to reinstall 8.1 everthing locked up. I had an upgrade disk instead of bootable. Now every time I turn the computer on "it asks for bootable media"; none of the hot keys work to get back eo mac os

You mised the last part where none of the hotkeys are working,neither options nor "X" it goes ms 8.1 boot up and asks foe a bootable disc. I am about to pull the HD put it into a case attach it to another computer and delete the file

Has anyone had problems with the out of the box windows adapter

Hello all,
If I run a trusted reconciliation from our student records system to a group in OIM, that has an access policy thet provisions home directories on a windows server, some home directorys are created, but not all. Usually the Windows connector makes the provisiong run fail.
We are successfully provisioning:
1) Student records system trusted recon to IDM
2) Active directory and exchange
3) Blackboard (virtual learning environment)
Unsuccessfully provisioning
1) Windows
Has any one else had problems with windows adapter?
Thanks
Dave.

Try a Reset of the Phone... You will Not Lose Any Data...
Turn the Phone Off... ( if it isn’t already )
Press and Hold the Sleep/Wake Button and the Home Button at the Same Time...
The Apple logo will Appear and then Disappear...
Usually takes about 10 - 20 Seconds...
Turn the Phone On...

Problem with connecting to free wifi after upgrading to Windows 8.1 from Windows 8

Hi
I had problems with connecting to free Wifi after upgrading my PC(Notebook) to Windows 8.1 from Windows 8. As I travel a lot within europe, I am used to being able to connect to Free Wifi(those that dont need a key or password to enter) but soon after downloading
Windows 8.1 I almost never was able to do this. I'd always get «LIMITED» even though the signal was strong.This was so fustrating,so much so that I reset my PC to clear it of Windows 8.1 and am now back to Windows 8.This is a shame because I was really liking
using Windows 8.1 and if not for this problem(which is a big one) I'd still be using it. If I download Windows 8.1 again from the Windows store what is the probability that I'll have the same problems?
Thanks Portozzygirl

More often than not when a device isn't working it is because the driver has become corrupted. Re-installing a fresh copy should help
http://windows.microsoft.com/en-us/windows7/Update-a-driver-for-hardware-that-isnt-working-properly?SignedIn=1
http://captaindbg.com/how-to-update-drivers-on-windows-7/ (works on win 8 too)
Wanikiya and Dyami--Team Zigzag

Problem with WCS Audit status missmatch after upgrade

We had problem with wcs Audit status missmatch after upgrade to 7.0.164.3 WLC : 6.0.188.0.
how I can fix the problem?

Hi,
Try pinging the WCS from the WLC and vice versa and then try again to refresh config from controllers.. then follow the below if its still not happening..
Please forwrd the trace level logs from the WCS (Specifically WCS0.0.TXT logs) while recreating the issue!!
Regards
Surendra

I downloaded a new version of firefox. It said it had problems with my norton toolbar and now it doesn't feature it in the window. I'm not that comp savvy. How do I either get the Norton toolbar up or go back to the old firefox? Thank you.

I downloaded a new version of firefox. It said it had problems with my norton toolbar and now it doesn't feature it in the window. I'm not that comp savvy. How do I either get the Norton toolbar up or go back to the old firefox? Thank you.

Please authorize ADE 3 with same credentials that you used with older version of ADE

Has anybody had the following error while trying to download iTunes 10.5? There is a problem with Windows Installer package. A program required for this install to complete could not be run.

Has anybody had the following error while trying to download iTunes 10.5? There is a problem with Windows Installer package. A program required for this install to complete could not be run.

Go to "control panel" then "add or remove programs". Highlight "Apple software update" Choose "change" click "Repair" This should do the trick. Then download and install iTunes 10.5 again.

Has anyone else had problems with ITunes and Windows 7?

I have had problems with the update - 'server busy' and it locking up while synching my IPhone with my laptop (upgraded to Windows 7) - any suggestions? I have lost all my pictures

Let's try the following user tip with that one:
iTunes for Windows 10.7.0.21: "iTunes has stopped working" error messages when playing videos, video podcasts, movies and TV shows

Hi anyone having a problem with windows 7 and itunes

Hi has anyone had a problem with windows 7n and Itunes...My Itunes was working now wont open says files missing reinstall...which I have done several times also other programs that were working now have error message your side by side configuration isnt correct any ideas!!!

Yes, I am also having trouble with my windows 7n. I tried to install the download but it didn't have 32 bit for my computer and I don't think it will help me see my phone on my external devices. I can't transfer my photos. Any help would be appreciated.

JDeveloper 10g video problems with Windows Vista

Hi,
I'm using JDev 10g 10.1.3.3 over Windows Vista with Aero active. Since I started using Vista, I have always had problems with JDev. First, the fonts in the JDev panels would mess up and the scrolling would not work well. I made some changes in the way JDev uses the JDK, I don't remember exactly what I did, but I think I made the whole JDev environment to use a newer JDK, which is not engouraged/supported by Oracle. Since then, the scrolling problem was solved. But When I run my app, Aero stops working.
Is there a way to make JDev 10g work perfectly with Vista?
(No, I'm not willing to migrate to 11g, for several reasons, so I need to stick to 10g for now).
Thanks!
Brian
Edited by: BrianBraun on Nov 12, 2008 7:08 AM

Try the various tips on this thread:
Using JDeveloper on Vista - some tips

I have had problems with iTunes lately it says iTunes was not installed correctly and to reinstall I tried 3x and still will not. Now I get msg it can not start because MSVCR80.dll is missing reinstall to fix??

I have had problems with iTunes lately it says iTunes was not installed correctly and to reinstall. I tried 3x and still will not. Now I get a message it can not start because MSVCR80.dll is missing reinstall to fix??

See Troubleshooting issues with iTunes for Windows updates.
tt2

Premiere Elements cause problems with Windows Media Center while streaming to TV.

I was having the following problem:
The audio from the streaming process of a recorded TV show on my HP computer to the remote receivers, a Sony Blu-ray player and/or a Sony Streaming Player, results in the loss of audio signal at exactly 30 seconds from the beginning on either devices. The video continues on as normal.
A user on the Windows 7 forum had the following possible cause and solution. His response was as follows:
I "solved" my issue, at least partially. Turns out for me a codec installed by Adobe Premiere Elements for audio (Main Concept) was causing mfpmp.exe to fail (you should see it getting an appcrash in the event log two or three times as soon as you start playing the media remotely.) This program is used by microsoft for DRM. I went through and one by one remained the various attached (non-microsoft) modules until i found the one that caused the appcrash. I haven't fully figured out if Elements is now negatively effected, but that's for a different forum.
I tried the quick fix by un-installing Adobe Premiere Elements. The uninstall solved my problem with Windows Media Center, but I want to re-install the software but I do not want to recreate the problem with Windows Media Center.
Is there another solution for this problem?

I reinstalled Adobe Premiere Elements 10 and the above mention problem reoccured. With a little detective work I was able to determine that the file causing my problem was "mc_dec_dd_ds.ax". I am not sure what this does to Adobe Premiere Elements 10 since I removed (renamed) the offending file. A strange side affect, renaming the file did cause an increase volume. Strange.

TS1702 I had this Scrabble on my iPad2 and began to have connection problems, it would lock in the "connecting" position. This is not the first time Scrabble has had problems with interface. Typically customers delete the Ap then download it again to rein

I have contacted EA about this and can find no help. I had this Scrabble on my iPad2 and began to have connection problems, it would lock in the "connecting" position. This is not the first time Scrabble has had problems with interface. Typically customers delete the Ap then download it again to reinstall it. During the process you sign in and approve the purchase KNOWING that another window will open saying that you have previously purchased it and that there is no charge. So what happened this time? It will not connect and all of my saved and current games are wiped out. I want my money back, this game interface is pretty junk and operates like some ancient DOS program,,bug,bug,buggy. I want my money back.

Go here:
http://www.apple.com/support/itunes/contact/
and follow the instructions to report the issue to the iTunes Store.
Regards.

I installed lv 6.1 on a windows 98 system. As I am having problems of stability (much more than with the former release 6.0), I would like to know if there is some specific problem with windows 98 or there is some patch.

I installed lv 6.1 on a windows 98 system. As I am having problems of stability (frequent crashes, much more than with the former release 6.0), I would like to know if there is some specific problem with windows 98 or there is some patch available.

My experience with Win98 is that it is not a very stable system, regardless of software used. For example, Win2000 and XP are far more stable than 98. I've had it crash on its own if I leave the computer on for several days.
I wouldn't recommend running programs for long time (few days) on this OS.
This being said, can you be more specific in your question. What kind of stability problems did you have, which VIs did you run (if possible post them here), did you change the interrupts and priority levels on those VI, do you get error messages or blue screen....
Zvezdana S.

I have a 13.5 month old Ipad2, wifi only that has had problems with wifi com from the beginning. I am learning that this is not unusual for apple. Any suggestions?

I have a 13.5 month old Ipad2, wifi only that has had problems with wifi com from the beginning. I am learning that this is not unusual for apple. Any suggestions?
ronald1094

Try #5.
Some things to try first:
1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
4. Go into your router security settings and change from WEP to WPA with AES.
5. Renew IP Address: (especially if you are droping internet connection)
    •    Launch Settings app
    •    Tap on Wi-Fi
    •    Tap on the blue arrow of the Wi-Fi network that you connect to from the list
    •    In the window that opens, tap on the Renew Lease button
~~~~~~~~~~~~~~~~~~~~~~~~~
iOS 6 Wifi Problems/Fixes
How To: Workaround iPad Wi-Fi Issues
http://www.theipadfan.com/workaround-ipad-wifi-issues/
Another Fix For iOS 6 WiFi Problems
http://tabletcrunch.com/2012/10/27/fix-ios-6-wifi-problems-ssid/
Wifi Doesn't Connect After Waking From Sleep - Sometimes increasing screen brightness prevents the failure to reconnect after waking from sleep. According to Apple, “If brightness is at lowest level, increase it by moving the slider to the right and set auto brightness to off.”
Fix For iOS 6 WiFi Problems?
http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
iOS 6 iPad 3 wi-fi "connection fix" for netgear router
http://www.youtube.com/watch?v=XsWS4ha-dn0
Apple's iOS 6 Wi-Fi problems
http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
~~~~~~~~~~~~~~~~~~~~~~~
How to Fix a Poor Wi-Fi Signal on Your iPad
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Fix-A-Poor-Wi-Fi-Signal-O n-Your-iPad.htm
iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
How to Fix: My iPad Won't Connect to WiFi
http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Connect iPad to Wi-Fi (with troubleshooting info)
http://thehowto.wikidot.com/wifi-connect-ipad
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
 Cheers, Tom

Had problems with windows 8 to 8.1 upgrade

Similar Messages

Maybe you are looking for