Hal config for Elantech/Eee 1000h touchpad?

I've tried using the one that's in the 901-install Wiki page, and find it massively flakey (sorry no offense to anyone), compared to using xorg.conf.. It doesn't allow precise control at all, and for some reason (I'm sure it's the way I move my finger), seems to really jump up or down when I move side to side..
So does anyone have a config for this that works real good, that cares to share?
Thanks in advance.

I know this problem occurs when I compile the elantech driver in the PS2/trackpoint driver:
CONFIG_MOUSE_PS2_TRACKPOINT=y
CONFIG_MOUSE_PS2_ELANTECH=y
I was told you need the latest xf86-input-synaptics but Arch has the latest...
My workaround was to disable elantech:
CONFIG_MOUSE_PS2_TRACKPOINT=y
# CONFIG_MOUSE_PS2_ELANTECH is not set

Similar Messages

Which kernel modules are needed for Elantech touchpad?

I've compiled a very minimal kernel for my system, which works just fine, I get booted into XFCE etc. and the keyboard works in the virtual consoles, but my (Elantech) touchpad does not function. Here is the lsmod from the standard kernel where the touchpad does work:
Module Size Used by
nvidia 7817056 26
ipv6 248388 10
aes_generic 26944 0
aes_i586 32896 1
cpufreq_ondemand 7180 1
ext2 62472 1
fuse 42260 2
pcmcia 32556 0
sdhci 15364 0
mmc_core 43524 1 sdhci
ohci1394 28848 0
yenta_socket 23052 3
ieee1394 79800 1 ohci1394
rsrc_nonstatic 11008 1 yenta_socket
pcmcia_core 32664 3 pcmcia,yenta_socket,rsrc_nonstatic
firewire_ohci 16128 0
firewire_core 36544 1 firewire_ohci
crc_itu_t 2304 1 firewire_core
psmouse 36496 0
serio_raw 5636 0
rtc_cmos 7584 0
rtc_core 15496 1 rtc_cmos
rtc_lib 2944 1 rtc_core
tpm_infineon 7976 0
tpm 12320 1 tpm_infineon
tpm_bios 6272 1 tpm
i2c_i801 8848 0
i2c_core 19328 2 nvidia,i2c_i801
pcspkr 2944 0
container 3840 0
video 16016 5
output 3200 1 video
sg 26640 0
intel_agp 21780 0
agpgart 27352 2 nvidia,intel_agp
thermal 13084 0
evdev 9344 7
fan 3844 0
button 6544 0
battery 10756 2
ac 4612 0
snd_seq_oss 29440 0
snd_seq_midi_event 6528 1 snd_seq_oss
snd_seq 47056 4 snd_seq_oss,snd_seq_midi_event
snd_seq_device 6924 2 snd_seq_oss,snd_seq
arc4 2176 2
ecb 3072 2
snd_hda_intel 289952 3
snd_hwdep 7300 1 snd_hda_intel
snd_pcm_oss 37024 0
snd_pcm 68996 2 snd_hda_intel,snd_pcm_oss
snd_timer 19204 2 snd_seq,snd_pcm
snd_page_alloc 8072 2 snd_hda_intel,snd_pcm
snd_mixer_oss 14464 2 snd_pcm_oss
snd 44772 13 snd_seq_oss,snd_seq,snd_seq_device,snd_hda_intel,snd_hwdep,snd_pcm_oss,snd_pcm,snd_timer,snd_mixer_oss
soundcore 6368 2 snd
iwl3945 84968 0
mac80211 117132 1 iwl3945
cfg80211 11528 1 mac80211
r8169 26244 0
acpi_cpufreq 11420 1
freq_table 3984 2 cpufreq_ondemand,acpi_cpufreq
processor 29400 4 thermal,acpi_cpufreq
ext3 121992 1
jbd 43412 1 ext3
mbcache 6912 2 ext2,ext3
sr_mod 14884 0
cdrom 33824 1 sr_mod
sd_mod 22656 5
pata_acpi 5248 0
ehci_hcd 32524 0
uhci_hcd 22672 0
usbcore 125292 3 ehci_hcd,uhci_hcd
ata_piix 14724 4
ata_generic 5252 0
libata 138352 3 pata_acpi,ata_piix,ata_generic
I've activated serio_raw and psmouse in the kernel, but what am I overlooking thats preventing the touchpad to work?
Last edited by HyperBaton (2008-03-09 15:00:32)

need to bump this thread i guess.
i also have a elantech touchpad on my zepto 3215w, and ive found this: http://arjan.opmeer.net/elantech/
the only available driver for elantech touchpads for linux.
i have kernel 2.6.25-arch now, also heard theres a 2.6.26 up n coming. can this patch be implemented in these kernels in some way?
and i dont know anything about kernel stuff so.. a helping hand would be nice on how to do it if its possible.

[SOLVED] Asus eee 1000H : netcfg and wicd unable to obtain IP

Hi,
I just installed arch linux on my asus eee 1000h, but I can't get
wireless to work. I installed the packages:
- wireless_tools
- netcfg
I have been reading through the beginners guide and the wireless setup guide,
but still no success.
I did
lspci | grep -i net
And found out I had to add the firmware for my card, so I did that and:
ifconfig wlan0 up
worked. So I did:
iwlist wlan0 scan
And found the network I wanted to connect too, so I do:
iwconfig wlan0 essid network_id key wep_hex_key
But I dont get associated to any access point, so I tried:
ifconfig wlan0 down
ifconfig wlan0 up
Sometimes this gets me associated to the access point, however, it seems to
be pretty unstable. Usually it 'looses' it's association after a short period
of time.
Then I do:
dhcpcd wlan0
However, I just get the output
dhcpcd: version 5.2.2 starting
dhcpcd: broadcasting for a lease
dhcpcd: timed out
I check "iwconfig wlan0" at it says it is still associated to the access point.
I have tried netcfg, but it also just get's timed out waiting for a lease.
I've tried to get this to work for a long time now, but can't seem to get it to
work. I've read somewhere that it might be a bug in dhcpcd? If you have a
suggestion for something to try, please keep in mind that I am not at all
familiar with arch linux and explain accordingly.
I installed arch linux because I want a distribution that forces me to learn
more about linux, I just did'nt think it would be this much trouble, been trying
for a couple of days now, I have allready learned alot though.
Thanks for any reply.
EDIT: I also tried setting the timeout to 120, it did not work
EDIT 2: I tried using netcfg again. It first returned:
WPA Authentication/Association Failed
I tried again, and it returned:
DHCP IP lease attempt failed
Does this mean I have to use wpa encryption? I find this
strange as I am connecting to the same network with
my ubuntu machine using wep encryption.
Last edited by khs (2011-04-20 12:31:28)

edit your /etc/rc.conf to blacklist all of the modules that interfere with the rt2860sta module:
MODULES=(!rt2800pci !rt61pci !rt2x00pci !rt2800usb !rt2800lib !rt2x00usb !rt2x00lib)
don't initialize network with any other services:
#eth0="dhcp"
#wlan0="dhcp"
INTERFACES=()
make sure you don't have conflicting daemons running:
DAEMONS=(syslog-ng dbus wicd netfs crond)
then restart and try again(or go through rmmod and stopping and starting the individual services)
btw... I am using arch+wicd on my eee 1000h to write this post, so if you have any more problems just let me know.
also check out the eee 901 archwiki page it has a lot of good info and links.
Last edited by trash (2011-04-20 00:23:21)

(solved ... kind of) What's wrong with eee 1000h? (suspend2ram)

Hi
I have an eee 1000h and have Archlinux running. I played around with it so maybe it's an old configuration problem...
Now I use acpi-eee-generic from AUR to use all the hotkeys which works fine.
Suspend to Disk also works flawlessly, my problem lies in suspend to ram.
With Kernel 2.6.28 everything worked.
With Kernel 2.6.29 in the beginning int worked too, but later after some updates it stopped working. With "stopped working" I mean it suspends well, power led switches to blinking. When trying to wake it, the power led changes to constant light, but that's everything that happens. Screen remains black, no response to keyboard and sysrq keys (they are enabled).
After an update to 2.6.30 it suddenly worked again.
After a recent update it stopped working again.
I have no idea what the problem is and what log files to look at... The pm-suspend log does not show something that shouldn't be there.
Someone here in the forums suggested s2ram from uswsusp but it doesn't wake up either with this (I had to use s2ram --force, because it didn't know the eee 1000h).
Anyone else experiencing this? Does anyone have a suggestion what to do about it?
Last edited by Cdh (2009-10-14 17:20:46)

2.6.31 now. It's getting worse. It goes to sleep well but then it refuses to do anything - Pressing keys does not do anything and even pressing the power button 4+ seconds does not give any reaction - the power led and the led on the power button keep flashing like in standby mode.
I still don't know wether this is only a problem for me or wether other arch users experience the same... nothing in the bugtracker, nothing in the forums...?
edit: I just tested:
With linux mint on an usb stick and kernel 2.6.30 from http://kernel.ubuntu.com/~kernel-ppa/mainline/v2.6.30.3 suspend2ram works without problems.
edit2: Wait... I tested it while the A/C adapter was attached... actually in Arch it does also work when the A/C adapter is attached. My battery is almost empty so this was maybe the reason it would not wake up (it does refuse to power on with a nearly empty battery, too)
Last edited by Cdh (2009-10-11 14:05:29)

Config for Production client

Dear all,
I'm a new basis and now I'm working in big project ERP. I have a disturbed about config for Production client.
In scc4 we must set client role is Production and No change allowed for Objects. But in production some time we need do Open and Close Period, or change following business requirement, ... This is not allowed to do in Production client.
How do we config for Production client to cover this requirements ?
Do we need a config client for maintain Production client ? Example: Production client is 500, Config client is 100. When we need Open or Close Period or change anything, we do in 100 and transfer request to 500.
Thank you very much.
Regards,
Thanh.
Do not use text message language, the next time your thread will be deleted.
Read the "Rules of Engagement"
Edited by: Juan Reyes on Dec 1, 2010 11:06 AM

You can customize transaction to be executable although the setting in SCC4 is "productive", this is accomplished by using transaction SOBJ:
Note 1497640 - Open and close periods in productive client
You can theoretically put every customizing view there and make it "executable" in a production system.
Markus

How to use the same services-config for the local and remote servers.

My flex project works fine using the below but when I upload my flash file to the server I doesn't work, all the relative paths and files are the same execpt the remote one is a linux server.
<?xml version="1.0" encoding="UTF-8"?>
<services-config>
    <services>
        <service id="amfphp-flashremoting-service"
            class="flex.messaging.services.RemotingService"
            messageTypes="flex.messaging.messages.RemotingMessage">
            <destination id="amfphp">
                <channels>
                    <channel ref="my-amfphp"/>
                </channels>
                <properties>
                    <source>*</source>
                </properties>
            </destination>
        </service>
    </services>
    <channels>
    <channel-definition id="my-amfphp" class="mx.messaging.channels.AMFChannel">
        <endpoint uri="http://localhost/domainn.org/amfphp/gateway.php" class="flex.messaging.endpoints.AMFEndpoint"/>
    </channel-definition>
    </channels>
</services-config>
I think the problem is the line
        <endpoint uri="http://localhost/domainn.org/amfphp/gateway.php" class="flex.messaging.endpoints.AMFEndpoint"/>
but I'm not sure how to use the same services-config for the local and remote servers.

paul.williams wrote:
You are confusing "served from a web-server" with "compiled on a web-server". Served from a web-server means you are downloading a file from the web-server, it does not necessarily mean that the files has been generated / compiled on the server.
The server.name and server.port tokens are replaced at runtime (ie. on the client when the swf has been downloaded and is running) not compile time (ie. while mxmlc / ant / wet-tier compiler is running). You do not need to compile on the server to take advantage of this.
Hi Paul,
In Flex, there is feature that lets developer to put all service-config.xml file configuration information into swf file. with
-services=path/to/services-config.xml
IF
services-config.xml
have tokens in it and user have not specified additional
-context-root
and this swf file is not served from web-app-server (like tomcat for example) than it will not work,
Flash player have no possible way to replace token values of service-config.xml file durring runtime if that service-config.xml file have been baked into swf file during compilation,
for example during development you can launch your swf file from your browser with file// protocol and still be able to access blazeDS services if
-services=path/to/services-config.xml
have been specified durring compilation.
I dont know any better way to exmplain this, but in summary there is two places that you can tell swf about service confogiration,
1) pass -services=path/to/services-config.xml parameter to compiler this way you tell swf file up front about all that good stuff,
or 2) you put that file on the webserver( in this case, yes you should have replacement tokens in that file) and they will be repaced at runtime .

Config for Dispatch Intrastat

Hello Experts,
Our client has a manufacturing plant in France which is already in SAP. Now they are planning to come up with another plant in France. We will be creating a new Company Code and Sales Org. My question is that since France is already in SAP and uses Intrastat reporting so do we need to make any config for new Plant/Sales Org or is the Intrastat setting defined at country level only.
Regards,
Karan

Hello Karan,
We are going to create a new Plant as well as a new Sales Organisation. In Intrastat there is one setting where we assign Business Transaction Type to Sales Org/Item Category combination. For the reference Sales Org this setting is already in place so do we need to do this setting for new Sales Org also or does it get copied when we create new sales org with reference to existing sales org?
In my view on the current set up which you are incorporating for new plant at France, there is no need to have new Company Code and Sales organization unless and untill there is some legal requirement at EU(If export process needs to be triggered). There is not much information available on Intrastat functionality but as i understand from you, you create Business transaction type at Intrastat, and then assign business transaction type to Sales organization, My suggestion would be :- most likely you would have to extend and include the newly created Sales Organization for Business transaction type.
Thanks,
Sarthak

Vendor Payment Terms config for 30%advance 70% after GR

Hi Guys,
How to configure Vendor Payment Terms for " Vendor Payment Terms config for 30%advance 70% after GR "
Please suggest your expert comments.
Thanks in advance.
Regards,
Jackie

sappassion2011 wrote:
Hi Guys,
>
> How to configure Vendor Payment Terms for " Vendor Payment Terms config for 30%advance 70% after GR "
>
> Please suggest your expert comments.
>
> Thanks in advance.
>
> Regards,
>
> Jackie
Hi Jackie,
Do them in trxn OME2
Regards
Shiva

What's the best Mac Pro config for Fireworks?

What's the best Mac config for Fireworks?
I can pretty much get whatever Mac I want at work... My boss is sick and tired of watching Fireworks crash all the time... I figure a hefty processor and lots of RAM and maybe a SSD will help…
I should get a Mac Pro right? Which processor?
• Two 2.40GHz 6-Core Intel Xeon processors (12 cores)
• Two 2.66GHz 6-Core Intel Xeon processor (12 cores)
• Two 3.06GHz 6-Core Intel Xeon (12 cores)
Should I get 24GB RAM?? Or is that overkill?
I'll get a 2TB serial hard drive…
I should get a 512 GB solid state drive offered by Apple right?
Or is it possible to get a larger better 3rd party SSD?
And then maybe two 21" Displays… Two 27s seems a little much… or does it?
Thanks in advance.

Oh and what about video cards? Or is Apple's default ok? (I'm not doing hard core PhotoShop retouching or anything).

Add file config for hole application?

Hi everyone,
Is there any one worked with build file config for hole fusion adf application? It is similar with web.config in .NET ASP web site. I think in jdeveloper, we can use web.xml for add some parameter but don't know how to read this parameter?
Any help is appreciate!
Thank.

User, please tell us your jdeveloper version!
In general you can read context or innit parameters from web.xml.
You get to them via the servlet context
String databaseHost =getServletContext().getInitParameter("database.host");
And to get to the servlet context use
FacesContext ctx = FacesContext.getCurrentInstance(); ServletContext servletContext = (ServletContext) ctx.getExternalContext().getContext();
Timo

Cisco ISE configs for switch

I suppose Cisco ISE sends a URL redirect to the switch and the switch presents it to the client in case of guest Access getting a URL redirect with User Acceptance Page (Wired Guests and not wireless).
My question here is, Do we need to configure http and https server on the switches (both supplicant and authenticator)?
I am sure it will need but just wanted a confirmation..
I have checked the configuration for supplicant and Authenticator switches for ISE and it has no where mentioned that part of the config.
http://www.cisco.com/en/US/docs/security/ise/1.0/user_guide/ise10_troubleshooting.html (a problem of URL redirection and possible cause is mentioned) ------- makes me sure that the config is needed.
http://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst2960x/software/15-0_2_EX/security/configuration_guide/b_sec_152ex_2960-x_cg/b_sec_152ex_2960-x_cg_chapter_010000.html
(config of supplicant and authenticator switch)---- nowhere mentioned of the http/https config for both switches.

Yes, its needed. The http/s server within the swtich is used to grab the http user traffic and redirect the traffic to the CWA portal, or a device registration portal, or even to the Mobile Device Management (MDM) onboarding portal. .
ip http server
ip http secure-server
The info below I grabbed from Cisco ISE for BYOD and secure unified access book.
"Many organization want to ensure that this redirection process using the switch's internal HTTP server is decoupled from the management of the switch itself, in order to limit the chances of an end user interacting with the management intervace and control plane of a switch. this may be accomplished by running the following two commands from global configuration mode:
ip http active-session-modules none
ip http secure-active-session-modules none"

Working eMTA config for a Metaswitch for Cisco DPQ3925

I need a working emta config for a DPQ3295 cable modem that will work with a Metaswitch AGC using NCS

Thanks for the reply but it still doesn't work. I have tried those commands a few times and I always get the same error...access violation.
I am using TFTPserver for Mac. My Server Status, Working path permissions and Parent folder permission are all green.
I have tried it with a pre-made file and without a pre-made file and I get the same result.
I can create and modify any files in my working directory.
This the message in the log file...Mar 25 13:12:41 MacBook-Pro-Retina.local TftpServer[1295]: 10.4-style NSDateFormatter method called on a 10.0-style formatter, which doesn't work. Break on _NSDateFormatter_Log_New_Methods_On_Old_Formatters to debug. This message will only be logged once.
I am not sure what that means, but I will research it after I post this.
I have tried both the CLI and the GUI and neither will work.

Error download when trying to download config for music [ios 7 beta 6]

I recieve an error when i try to download the music/video config for ios 7 beta 6. Any ideas?

We can't help you here as you are not allowed to talk about beta software in this forum. Ask this question in the Developer forum > http://devforums.apple.com

BEST CONFIG FOR EDITING

Hello i have adobe premiere CC with imac, pegasus RAID 4 and external SSD hardrive 512Go. What is the best performance config for : Media temp files, rush, application ?
Thank you

Read all the articles at Tweakers Page

XCM Config for R/3 ISA

Hi
I am following the best practice but still getting some error in webshop is there a step I am missing, Can anyone please help me with this XCM config for a mySAP Ecommerce
Thank you so much
Abhi

i have ECC6. i want to enable sap ecommerce and IPC on this machine. what are the tings i have to do please let me know in detail.
when i m trying to acess this page throu url http://<host>:<port>/b2b/b2b/init.do
its giving error.
should i have to activate XCM if yes the how please reply ASAP
thanks with kind regards

Hal config for Elantech/Eee 1000h touchpad?

Similar Messages

Maybe you are looking for