HAL Essbae adapter error

I installed HAL 7.3 and Essbase adapter. Other than having to create a user variable "PATH", I was able to install Essbase adapater OK. The problem is that, when I drag-in the Essbase adapter and enter server, userID, and password to connect to Essbase, it gives me an error "Exception #1 Error Code = 1000 Error Msg = Error: Could not create session" I'm fairly new to HAL, so I'd appreciate any leads. Thanks!

The user variable "PATH" did not exist. I created the "PATH" variable with following value: C:\Program Files\Vignette\V7\vbis\Hyperion\EssbaseAdapter\adm. I should had read the log file first, solution was in log file (C:\Program File\Vignette\v7\vbis\logs\ directory).

Similar Messages

HAL 9.3.1 Essbaes Adapter Error

We recently migrated from Planning 3.5.1 to 9.3.1 and are still using HAL. In several of our Integrations we were able to pull in the new adapters (Planning 9.2 and Essbase 9.2 - we had to use this older Essbase adapter because the newest version wasn't working). And most of my integrations run fine.
However, I have one integration for HAL that is failing on a Dimension extraction step with the message:
Flow ID: 'getMetaActProd'
Adapter ID: 'Essbase2--GrProfit'
Error Message: com.hyperion.essbaseadapter.application.ap.APException: Exception #1: error code - 1033: Essbase Error: native code - 1060000
Most the time we don't get this detail but a 'C++ exception' message and the integration stops (usually when we run this from it's executable). Sometimes running the integration from the executable gives us the other message above - wierd.
Anyway, I go into the integration and run this and this steps is pulling about 4,000 part numbers into an Access database -we're comparing part #'s from our outline to parts that come in through a data source. The integration gets to about 3,000 or so and then looks like it freezes up and we get the above message.
I have basically the same integration running on a smaller applicaiton/database and it gets through this step OK. So, I'm at a bit of a loss here as to what I can check. I suspect the adapter was fine because I have integrations the get into Essbase and load and calc' data and all that fine. But this step on our larger database is bombing.
Anyone have any ideas?

try the method suggested by user609180 in this post: Re: HAL error 1033 when connecting to essbase/ Analytics />
It worked for me
<blockquote>
<blockquote>
 I've got a solution which Ive tested and works! You need the 9.2.0
 runtime in order for the VBIS Essbase 9.2.0 Adapter to work. This comes
 from installing the 9.2.0 Essbase Client
 This is what I did I on my client machine:
 1. Uninstall EAS 9.3.1 Console (Not the server), Essbase Client 9.3.1, VBIS
 2. Reinstall in this sequence:
 2.1 Essbase Client 9.2.0, including runtime, and spreadsheet add-in
 2.2 VBIS 7.3
 2.3 HAL Essbase Adapter 9.2.0
 2.4 EAS 9.3.1 Console
 Also
 ensure these Window Environment Variables are set(This is based on my
 computer settings so could differ from yours) Right mouse click My
 Computer > Properties > Advanced Tab > Environment Variables:
 /*USER VARIABLES*/
 /*CLASS PATH*/
 C:\Program Files\Vignette\V7\vbis\Hyperion\EssbaseAdapter
 /*PATH*/
 C:\Program Files\Vignette\V7\vbis\Hyperion\EssbaseAdapter\adm
 /*ENVIRONMENT VARIABLES*/
 /*CLASS PATH*/
 C:\Program Files\Vignette\V7\vbis\Hyperion\EssbaseAdapter\adm
 /*PATH*/
 C:\Program Files\Vignette\V7\vbis\Hyperion\EssbaseAdapter\adm;C:\Program Files\Java\jre1.5.0_07\bin\client\
 You might have extra variable paths defined under the PATH variables.
 Ive
 managed to add the adapter in a VBIS project without any errors, it
 connects to Essbase though yet to test if it will perform a send
 properly. The spreadsheet addin works with 9.2.0 and the EAS Console
 works with 9.3.1 connecting to the Essbase Server 9.3.1.
 Hope this helps!
 Message was edited by:
 user609180
</blockquote>
</blockquote>

Hyperion hal essbase adapter error

hi all,
when using HAL, palnning componnent is working fine.
When tring to use essbase adapter, I recieve an error: exception #1 error code 1000 could not create session
i'm so Desperate.
please Help!
Thanks,
Wendy :)
Edited by: 956623 on 07:25 03/09/2012

Hi,
This is usually path/classpath problem.
Ensure the following environment variable references exist on each machine running HAL and the Essbase adapter.
To view/set the environment variables, navigate to My Computer -> Properties -> Advanced -> Environment Variables.
User CLASSPATH:
<HAL_Install_Path>\vbis\Hyperion\EssbaseAdapter
System or User PATH:
<HAL_Install_Path>\vbis\Hyperion\EssbaseAdapter\adm
Cheers
John
http://john-goodwin.blogspot.com/

HAL Essbase Adapter Error

Error Message -- java.lang.UnsatisfiedLinkError: no HssJNIDriver410 in java.library.path I have the 6.5 Essbase runtime environment installed and used the bundled JRE that came with the Full HAL install.

The user variable "PATH" did not exist. I created the "PATH" variable with following value: C:\Program Files\Vignette\V7\vbis\Hyperion\EssbaseAdapter\adm. I should had read the log file first, solution was in log file (C:\Program File\Vignette\v7\vbis\logs\ directory).

HAL Planning Adapter Error

I am getting the following error when I am creating a newplanning adapter. Error unmarshaling return; nested exceptionis:java.lang.ClassNotFoundException:com.hyperionlicence.LicenseAccessException(no security manager:RMI class loaderdisabled) Did anyone face this type of error before. You input is greatly appreciated. thanks

well its seems like a problem with java plug in version.....set default JRE version 1.3.0_05 in control panel andchange the JRE 1.4.1_02 in the system environment variables to1.3.0_05 <table><tr valign="top"><td></td></tr></table>

HAL planning adapter issue

Hi all,
We are using planning 9.3.1, and the planning and HAL 7 are on same machine , the issue was when I tried to pull the planning adapter on to flow diagram - I got a prompt for planning server name , i gave the planning server name
the error is
connection refused to host; nested exception is: java.not connect exception ;connection refused; connect.
Does I need to do any priliminary configuration before trying to use planning adapter..... I appreciate if anyone help me regarding this issue.
Thanks a lot
regards
M.V

Here are a couple of other things to check:
1) Make sure the Planning web app server is running.
2) Verify that you can log on to Planning at http://<your_server>:8300/HyperionPlanning/LogOn.jsp using the user name and password you're supplying to the HAL Planning adapter.
3) Make sure you're supplying the Planning server name, not the Essbase server name to the server port on the Planning adapter. I get them mixed up every once in a while, and when I do, I receive exactly the error message you posted.
4) Make sure the RMI registry service is listening on port 11333. If it isn't, click the Advanced... button on the dialog that appears when you drop the Planning adapter onto a flow diagram, and then specify the port number the RMI registry service is listening on. Alternatively, reconfigure the RMI registry service is listen on port 11333.
Hope this helps.

Unable to create database due to ORA-12560, TNS protocol adapter error

Hello,
I'm trying to create an 8.1.7.0 database on a W2k server, but it is failing because as soon as svrmgrl is launched, I get an ORA-12560, TNS: protocol adapter error:
D:\oracle\db_creation_scripts>D:\oracle\ora81\bin\svrmgrl @D:\oracle\db_creation_scripts\mterm62run.sql
Oracle Server Manager Release 3.1.7.0.0 - Production
Copyright (c) 1997, 1999, Oracle Corporation. All Rights Reserved.
ORA-12560: TNS:protocol adapter errorEcho ON
SVRMGR> connect INTERNAL/manager
ORA-12560: TNS:protocol adapter error
SVRMGR> startup nomount pfile="D:\oracle\admin\mterm62\pfile\initmterm62.ora"
LCC-00161: Message 161 not found; product=RDBMS; facility=MGR
My ORACLE_HOME, ORACLE_SID, and TNS_ADMIN environmental variables are correctly set, and I'm able to tnsping the listener.
I've enabled tracing, and my client trace file is:
--- TRACE CONFIGURATION INFORMATION FOLLOWS ---
New trace stream is d:\trace\client_trace.log_2084_9.trc
New trace level is 6
--- TRACE CONFIGURATION INFORMATION ENDS ---
--- PARAMETER SOURCE INFORMATION FOLLOWS ---
Attempted load of system pfile source d:\oracle\ora81\network\admin\sqlnet.ora
Parameter source loaded successfully
Attempted load of local pfile source D:\oracle\db_creation_scripts\sqlnet.ora
Parameter source was not loaded
-> PARAMETER TABLE LOAD RESULTS FOLLOW <-
Successful parameter table load
-> PARAMETER TABLE HAS THE FOLLOWING CONTENTS <-
TRACE_DIRECTORY_SERVER = d:\trace
TRACE_DIRECTORY_CLIENT = d:\trace
NAMES.DIRECTORY_PATH = (TNSNAMES, HOSTNAME)
SQLNET.CRYPTO_SEED = 4fhfguweotcadsfdsafjkdsfqp5f201p45mxskdlfdasf
TRACE_FILE_CLIENT = client_trace.log
TRACE_FILE_SERVER = server_trace.log
SQLNET.AUTHENTICATION_SERVICES = (NTS)
TRACE_UNIQUE_CLIENT = on
TRACE_LEVEL_CLIENT = ADMIN
TRACE_LEVEL_SERVER = ADMIN
--- PARAMETER SOURCE INFORMATION ENDS ---
--- LOG CONFIGURATION INFORMATION FOLLOWS ---
Log stream will be "D:\oracle\db_creation_scripts\sqlnet.log"
Log stream validation not requested
--- LOG CONFIGURATION INFORMATION ENDS ---
nigini: entry
nigini: Count in NI global area now: 1
nigini: Count in NI global area now: 1
nrigbi: entry
nrigbni: entry
nrigbni: Unable to get data from navigation file tnsnav.ora
nrigbni: exit
nrigbi: exit
nigini: exit
niqname: Hst is already an NVstring.
niqname: Inserting CID.
niotns: entry
niotns: niotns: setting up interrupt handler...
niotns: Not trying to enable dead connection detection.
niotns: Calling address: (DESCRIPTION=(ADDRESS_LIST=(ADDRESS=(PROTOCOL=BEQ)(PROGRAM=oracle)(ARGV0=oracleMTERM62)(ARGS='(DESCRIPTION=(LOCAL=YES)(ADDRESS=(PROTOCOL=beq)))')))(CONNECT_DATA=(SID=MTERM62)(CID=(PROGRAM=D:\oracle\ora81\bin\SVRMGRL.EXE)(HOST=SERV0354)(USER=tarisa))))
nsmal: 140 bytes at 0x12493f0
nscall: connecting...
nladini: entry
nladini: exit
nladget: entry
nladget: exit
nlpcaini: entry
nlpcaini: prg =
nlpcaini: arg[0] =
nlpcaini: arg[1] =
nlpcaini: exit
nsmal: 420 bytes at 0x12542f0
nsmal: 1712 bytes at 0x12572f0
nsopen: opening transport...
ntpcon: entry
ntpcon: toc = 1
sntpcall: entry
snlpcss: entry
ntpcon: exit
nserror: nsres: id=0, op=65, ns=12560, ns2=0; nt[0]=530, nt[1]=2, nt[2]=0; ora[0]=0, ora[1]=0, ora[2]=0
nsopen: unable to open transport
nsmfr: 1712 bytes at 0x12572f0
nsmfr: 420 bytes at 0x12542f0
nladget: entry
nladget: exit
nsmfr: 140 bytes at 0x12493f0
nladtrm: entry
nladtrm: exit
nioqper: error from nscall
nioqper: nr err code: 0
nioqper: ns main err code: 12560
nioqper: ns (2) err code: 0
nioqper: nt main err code: 530
nioqper: nt (2) err code: 2
nioqper: nt OS err code: 0
niomapnserror: entry
niqme: entry
niqme: reporting NS-12560 error as ORA-12560
niqme: exit
niomapnserror: returning error 12560
niomapnserror: exit
niotns: Couldn't connect, returning 12560
niotns: exit
nigtrm: Count in the NI global area is now 0
nnfgdei: entry
nrigbd: entry
nrigbd: exit
nigtrm: Count in the NL global area is now 0
My tnsnames, listener and sqlnet.ora files are very simple:
## BEGIN TNSNAMES.ORA
# TNSNAMES.ORA Network Configuration File: D:\oracle\ora81\NETWORK\ADMIN\tnsnames.ora
# Generated by Oracle configuration tools.
MTERM62 =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = 10.3.1.75)(PORT = 1521))
(CONNECT_DATA =
(SERVICE_NAME = mterm62)
(INSTANCE_NAME = mterm62)
INST1_HTTP =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = 10.3.1.75)(PORT = 1521))
(CONNECT_DATA =
(SERVER = SHARED)
(SERVICE_NAME = mterm62)
(PRESENTATION = http://admin)
# LISTENER.ORA Network Configuration File: D:\oracle\ora81\NETWORK\ADMIN\listener.ora
# Generated by Oracle configuration tools.
LISTENER =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = serv0354)(PORT = 1521))
SID_LIST_LISTENER =
(SID_DESC =
(ORACLE_HOME = D:\oracle\ora81)
(SID_NAME = mterm62)
TRACE_LEVEL_LISTENER = ADMIN
# SQLNET.ORA Network Configuration File: D:\oracle\ora81\NETWORK\ADMIN\sqlnet.ora
# Generated by Oracle configuration tools.
TRACE_DIRECTORY_CLIENT = d:\trace
TRACE_UNIQUE_CLIENT = on
TRACE_DIRECTORY_SERVER = d:\trace
SQLNET.AUTHENTICATION_SERVICES= (NTS)
TRACE_FILE_CLIENT = client_trace.log
TRACE_FILE_SERVER = server_trace.log
TRACE_LEVEL_CLIENT = ADMIN
TRACE_LEVEL_SERVER = ADMIN
NAMES.DIRECTORY_PATH= (TNSNAMES, HOSTNAME)
SQLNET.CRYPTO_SEED = 4fhfguweotcadsfdsafjkdsfqp5f201p45mxskdlfdasf
Does anyone have any ideas what else I can check. I'm a Unix person, not a Windows person, which is making it even more complicated. If I was on Unix, I'd just blow everything away and start again from scratch, but since I'm not sure how to remove all traces from the registry, etc., I don't want to try that on this machine. There was already one other database created, but it's not goign to be used.
Any help would be greatly appreciated.
regards,
Tarisa.

hi,
thanks for the info. the problem, as it turns out, was that I was connected to the db server via a terminal service (Microsoft Management Console), which for some reason caused probelms with TNS. After I connected directly to the machine using VNC, I was able to create the database with no problems. strange but true.
regards,
Tarisa.

"TNS: Protocol adapter error" while creating a database

Hi All,
I´m new to Oracle and trying to create a database.
We use Oracle 8.1.7
I´m using the Database Configuration Assistant. The problem is when creating the database I get the error:
TNS-12560 TNS: Protocol adapter error
Any help will be really appreciated.
Thanks in advance,
Carlos.

Do you have ORACLE_HOME and/or ORACLE_SID defined in the environment which are different than the settings for the new database that you are trying to create?

TNS-12560: TNS:protocol adapter error, ORA-12535: TNS:operation timed out

I installed Oracle 9i (9.2.0.1.0) on a Windows XP machine (the machine is in a domain). There were no errors during the instalation, but I have problems connecting from the same machine using the sid. Here are some examples from a command promt:
D:\>tnsping orcl9i
TNS Ping Utility for 32-bit Windows: Version 9.2.0.1.0 - Production on 31-OCT-20
08 17:43:22
Copyright (c) 1997 Oracle Corporation. All rights reserved.
Used parameter files:
Used TNSNAMES adapter to resolve the alias
Attempting to contact (DESCRIPTION = (ADDRESS_LIST = (ADDRESS = (PROTOCOL = TCP)
(HOST = timisoara01)(PORT = 1521))) (CONNECT_DATA = (SERVICE_NAME = orcl9i)))
TNS-12560: TNS:protocol adapter error
D:\>sqlplus "sys/pass@orcl9i as sysdba"
SQL*Plus: Release 9.2.0.1.0 - Production on Fri Oct 31 17:54:54 2008
Copyright (c) 1982, 2002, Oracle Corporation. All rights reserved.
ERROR:
ORA-12535: TNS:operation timed out
Enter user-name:If I don't use the sid I can connect:
D:\>sqlplus "sys/pass as sysdba"
SQL*Plus: Release 9.2.0.1.0 - Production on Fri Oct 31 18:05:46 2008
Copyright (c) 1982, 2002, Oracle Corporation. All rights reserved.
Connected to:
Oracle9i Enterprise Edition Release 9.2.0.1.0 - Production
With the OLAP and Oracle Data Mining options
JServer Release 9.2.0.1.0 - Production
SQL>If I go to services I see that the service is running: OracleServiceORCL9I Started.
Thx.

Yes, the XP firewall is running. During the Oracle instalation it poped up twice, but I selected 'Unblock'. I can't turn it off because it is running using the domain settings, but I can add exceptions (programs or ports). Port 1521, tnsping or sqlplus are not blocked and there is an option 'Display a notification when Windows Firewall blocks a program' witch is checked.

File adapter error after updating to SP19 (INBOUND_BINDING_ERROR)

File adapter error after updating to SP19 (INBOUND_BINDING_ERROR)
Hi all,
im having some troubles after the installation of SP19 (from SP16 in NW04) with File Adapter (File->Idoc scenario).
In message monitoring (Adapter Engine), I have several messages with status "System Error". The error text is :
Received XI System Error. ErrorCode: INBOUND_BINDING_ERROR
ErrorText: ErrorStack: Error in sender agreement for party '', service 'LEGACY_DEV', interface namespace 'http://XXXXX.com/XXXXXX', interface 'INTERFACE_OB' No sender agreement found for , , , , ,
Im sure that the Integration Directory settings have not been changed. So I tried the following, but the problem persists:
- Deactivation/Activation of File Adapter channel
- check that user XIISUSER is not locked
- checked SXI_CACHE (it seems ok)
- Many CPA full refresh
- Dummy modifications of File Adapter channels (a dummy modification of the description)
- Reboot J2EE
I've seen that someone else had problems after upgrading to SP19. I'd really appreciate any suggestion of how to solve my issue.
Thank you
Manuel

Hi Prabhu,
I've already tried to restart server, but nothing happened. (Before update to SP19, the interface worked well).
This is the error log from message monitoring:
 2007-01-16 16:37:34 Success Channel cc_File_Snd_Bolle: Entire file content converted to XML format
2007-01-16 16:37:34 Success Send binary file "BOLLE_20061229142059.CSV" from FTP server "AS810T:/sapinbound", size 8733 bytes with QoS EOIO
2007-01-16 16:37:34 Success Application attempting to send an XI message asynchronously using connection AFW.
2007-01-16 16:37:34 Success Trying to put the message into the send queue.
2007-01-16 16:37:35 Success Message successfully put into the queue.
2007-01-16 16:37:35 Success The application sent the message asynchronously using connection AFW. Returning to application.
2007-01-16 16:37:35 Success The message was successfully retrieved from the send queue.
2007-01-16 16:37:35 Success File "BOLLE_20061229142059.CSV" successfully archived on FTP server "AS810T" as "/sapinbound/bolle/20070116-163735-245_BOLLE_20061229142059.CSV"
2007-01-16 16:37:35 Success The message status set to DLNG.
2007-01-16 16:37:35 Error Received XI System Error. ErrorCode: INBOUND_BINDING_ERROR ErrorText: ErrorStack: Error in sender agreement for party '', service 'LEGACY_DEV', interface namespace http://XXXXX.com/XXXXXX', interface 'INTERFACE_OB' No sender agreement found for , , , , ,
2007-01-16 16:37:35 Error Transmitting the message to endpoint http://SERVERNAME:8000/sap/xi/engine?type=entry using connection AFW failed, due to: com.sap.aii.af.ra.ms.api.RecoverableException: INBOUND_BINDING_ERROR:. 
2007-01-16 16:37:35 Success The asynchronous message was successfully scheduled to be delivered at Tue Jan 16 16:42:35 CET 2007.
2007-01-16 16:37:35 Success The message status set to WAIT.
2007-01-16 16:42:35 Success Retrying to send message. Retry: 1
After this, the system try to resend the message, and the same error appears several times.
Ty,
Manuel

Receiver Mail adapter Error

HI All
   i    am doing   a   scenario     SFTP    to mail adapter,   i am sending a    file    to    SFTP ADAPTER and   Mail adapter   send the   mail to    clint,   i am   using java mapping ,   i have checked the message in    RWB mesage is    fail   in mail adapte,
   ERROR :   Message processing failed. Cause: java.lang.Exception: java.io.IOException: server does not support PLAIN or LOGIN authentication
anyone suggest me     soloution?

Hi Pankaj,
Remove your mail server user id and password and keep authentication mode as Plain and try in mail adapter configuration.
You can try accessing ID from within IR via menu options or via a direct URL.
Thanks,

TNS-12560: TNSrotocol adapter error

Iu2019m installing SAP ERP 6.0 on a Windows server 2008 with Oracle 10.2.0.4.0.
First of all I installed the Oracle software by means of Oracle Universal Installer.Then I used the Sapinst tool. At the step u201CConfigure Oracle server Networku201D I get an error. In the lsnrctl.log file I can read:
TNS-12560: TNSrotocol adapter error
TNS-00530: Protocol adapter error
These are my .ora files in the path <oracle-home>\NETWORK\ADMIN::
1 )LISTENER.ORA
ADMIN_RESTRICTIONS_LISTENER = on
LISTENER =
(ADDRESS_LIST =
(ADDRESS =
(PROTOCOL = IPC)
(KEY = DEV.WORLD)
(ADDRESS=
(PROTOCOL = IPC)
(KEY = DEV)
(ADDRESS =
(COMMUNITY = SAP.WORLD)
(PROTOCOL = TCP)
(HOST = SAP-BTdemo)
(PORT = 1527)
STARTUP_WAIT_TIME_LISTENER = 0
CONNECT_TIMEOUT_LISTENER = 10
TRACE_LEVEL_LISTENER = OFF
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(SID_NAME = DEV)
(ORACLE_HOME = F:\oracle\DEV\102)
2) SQLnet.ora:
AUTOMATIC_IPC = ON
TRACE_LEVEL_CLIENT = OFF
NAMES.DEFAULT_DOMAIN = WORLD
05.01.06 unsorported parameter now
#NAME.DEFAULT_ZONE = WORLD
05.01.06 set the default to 10
SQLNET.EXPIRE_TIME = 10
SQLNET.AUTHENTICATION_SERVICES = (NTS)
05.01.06 set to default
#TCP.NODELAY=YES
05.01.06 set to 32768
DEFAULT_SDU_SIZE=32768
3) tnsname.ora:
DEV.WORLD=
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS =
(COMMUNITY = SAP.WORLD)
(PROTOCOL = TCP)
(HOST = SAP-BTdemo)
(PORT = 1527)
(CONNECT_DATA =
(SID = DEV)
(GLOBAL_NAME = DEV.WORLD)
I have set the following Environment Variables:
u2022 ORACLE_HOME = F:\oracle\DEV\102
u2022 ORACLE _SID= DEV
u2022 TNS_ADMIN= F:\oracle\DEV\102\NETWORK\ADMIN
I have installed Oracle by Universal Installer and, in the Server Manager, I got only the following Oracle Service:
OracleDEV102iSQL*Plus
If I use the command lsnrctl start from Windows prompt I get the same error.
Can anyone help me?

Ok, I made all the things that you say: installed Oracle sw, installed the Opatch end started SAPinst.
But SAPinst stops when configuring oracle server network. I really don't understand what to do. If i write the command of LSNRCTL and tnsping the DEV (my DBsid) i have the following error:
LSNRCTL> services
Connecting to (ADDRESS=(PROTOCOL=IPC)(KEY=DEV.WORLD))
TNS-12541: TNS:no listener
TNS-12560: TNS:protocol adapter error
TNS-00511: No listener
 64-bit Windows Error: 2: No such file or directory
Connecting to (ADDRESS=(PROTOCOL=IPC)(KEY=DEV))
TNS-12541: TNS:no listener
TNS-12560: TNS:protocol adapter error
TNS-00511: No listener
 64-bit Windows Error: 2: No such file or directory
Connecting to (ADDRESS=(COMMUNITY=SAP.WORLD)(PROTOCOL=TCP)(HOST=10.32.33.4)(PORT
=1527))
TNS-12541: TNS:no listener
TNS-12560: TNS:protocol adapter error
TNS-00511: No listener
 64-bit Windows Error: 61: Unknown error
LSNRCTL> status
Connecting to (ADDRESS=(PROTOCOL=IPC)(KEY=DEV.WORLD))
TNS-12541: TNS:no listener
TNS-12560: TNS:protocol adapter error
TNS-00511: No listener
 64-bit Windows Error: 2: No such file or directory
Connecting to (ADDRESS=(PROTOCOL=IPC)(KEY=DEV))
TNS-12541: TNS:no listener
TNS-12560: TNS:protocol adapter error
TNS-00511: No listener
 64-bit Windows Error: 2: No such file or directory
Connecting to (ADDRESS=(COMMUNITY=SAP.WORLD)(PROTOCOL=TCP)(HOST=10.32.33.4)(PORT
=1527))
TNS-12541: TNS:no listener
TNS-12560: TNS:protocol adapter error
TNS-00511: No listener
 64-bit Windows Error: 61: Unknown error
C:\SAPinst>tnsping DEV
TNS Ping Utility for 64-bit Windows: Version 10.2.0.4.0 - Production on 27-OCT-2
010 14:11:45
Copyright (c) 1997, 2007, Oracle. All rights reserved.
Used parameter files:
F:\oracle\DEV\102\NETWORK\ADMIN\sqlnet.ora
Used TNSNAMES adapter to resolve the alias
Attempting to contact (DESCRIPTION = (ADDRESS_LIST = (ADDRESS = (COMMUNITY = SAP
.WORLD) (PROTOCOL = TCP) (HOST = 10.32.33.4) (PORT = 1527))) (CONNECT_DATA = (SI
D = DEV) (GLOBAL_NAME = DEV.WORLD)))
TNS-12541: TNS:no listener
Why isn't SAPINST able to use the listener??
Edited by: Paolo Rubino on Oct 27, 2010 3:16 PM

ORA-12560 TNS protocol Adapter error in 11g (11.1.0.6)

Hello All,
I have Oracle 11g installed on my machine and when i tried to log in to sql plus i got the error below:
ORA-12560 TNS protocol Adapter error
By setting the ORACLE_SID = orcl by browsing to the bin directory of Oracle Installation the above error disappaears and i am able to log in from sql plus.
My intention is to create a db backup for which i am trying to use the exp command...this time the same error appears.
Also the solution of setting the ORACLE_SID is cumbersome..everytimt i want to use sql plus i need to go in and set the ORACLE_SID.
Can anybody please help me out find a good solution for this?
Any help would be appreciated friends.....
Thanks in Advance!!!!!
Regards.
Alicia

Also the solution of setting the ORACLE_SID is cumbersome..everytimt i want to use sql plus i need to go in and set the ORACLE_SID.
Can anybody please help me out find a good solution for this?The solution depends on your (not specified) operating system...
Anyway, if you have more than one database it's normal that you have to set ORACLE_SID, if not how can Oracle know which database you want to access to ?
You can create batch files, one per database, or you can use connection strings, e.g. sqlplus username/password@<DB>.

ORA-12560: TNS:protocol adapter error in Oracle Forms...

Hi, I installed Oracle developer suite to use for Oracle forms but am getting "ORA-12560: TNS:protocol adapter error" when trying to run a form. The database is running locally on my PC.
I've run the command line to see if hostname matches up with the "HOST= " in the ".../network/admin/listener.ora " file match, they do. What can I try next? I did have Oracle 10gXE installed, which I have now removed. I'm including my tnsnames and listener file content:
# tnsnames.ora Network Configuration File: C:\oracle\product\10.2.0\db_1\network\admin\tnsnames.ora
# Generated by Oracle configuration tools.
LISTENER_ORCL =
(ADDRESS = (PROTOCOL = TCP)(HOST = frankenputer)(PORT = 1522))
ORCL =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = frankenputer)(PORT = 1522))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = orcl)
EXTPROC_CONNECTION_DATA =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1))
(CONNECT_DATA =
(SID = PLSExtProc)
(PRESENTATION = RO)
# listener.ora Network Configuration File: C:\oracle\product\10.2.0\db_1\network\admin\listener.ora
# Generated by Oracle configuration tools.
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(SID_NAME = PLSExtProc)
(ORACLE_HOME = C:\oracle\product\10.2.0\db_1)
(PROGRAM = extproc)
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1))
(ADDRESS = (PROTOCOL = TCP)(HOST = frankenputer)(PORT = 1522))
Thanks in advance for any help!

Of course you found another one. Each .and every Oracle database client home (such as developer, app server) has one.
Don't just change the port - the tnsnames.ora in the dev home does not point to a database service. It only points to an extproc [external procedure called by a database]. You need to put a database service entry into that file similar to the one in the database home. (Easiest solution - copy the tnsnames.ora from db home ... after you've made a backup)
And please don't tell me you are using Developer 6i - a simple Google search would verify that the networking is incompatible.

Oracle 8i tns:protocol adapter error

Hello,
     I am programmer and wanted to try and learn oracle
database. I am trying to install Oracle 8i Releae 8.1.5
developer edition (which I got with a book) on windows NT 4.0
with service pack 6. But after doing a minimal install when and
creating a database I am unable to access that database using
SQL plus. Whenever I try to connect an error message is
displayed saying:
     "ora12560TNS: protocol adapter error."
     I tried to install it on my friends machine on one
friends computer it worked but on another's it didn't work. Same
message appears on that friends machine also who is using
windows 2000 professional.
     Could you please tell me what could be the problem.
Because I am able to connect to database using mmc snap-in
provided for database administration.
     Also during installation it displays a message about a
single missing .tmp file in a sub-directory which is many levels
deeper than the directory where oracle is being installed. File
name I think is nmconf.tmp.
     I hope you can suggest me some way to solve this problem.
Sukhwinder Singh

Check if you have enough space and the required permissions to write to the temporary directory used by the installer during installation.
We had a similar problem on a UNIX installation which was eventually traced to a non-writable temporary directory that caused the installation to silently fail, which effectively caused the TCP/IP protocol adapter not to be installed.

HAL Essbae adapter error

Similar Messages

Maybe you are looking for