Handling anything gets extremely slow after some time

I'm having a strange issue with CS5. Without any apparent reason, the file I am editting becomes very slow with simple actions. For example, moving a (random) object around. Using the arrow keys, it takes every move about a second to complete... there is a lot of weirdness surrounding this, so i'll try to give as much input as I can.
- before this issue comes up, everything is working fine
- there is only line art in the file, simple line art for that matter (squares, straight lines, text).
- if this happens, and i copy paste everyting in a new file, it is working fine again for a random amount of time, until it gets stuck in slow mode again
- Outline mode, has no effect on the delay
- Turned off all effects (only drop shadows) and had no effect
- The file size is around 2,5MB
- Tried tweaking all the settings i could think off (resolution, anti-aliasing, etc), which had no effect.
- Turning off thumbnails in layers has no effect
- sometimes, re-opening the file helps, sometimes it doesn't...
- If the problem is "on", whenever i nudge an object, my cpu shoots to 100%.
- I'm running on a 2010 Macbook Pro (4gb ram), so that shouldn't be a problem (I think), it works fine sometimes as well.
- Tried running OSX in 64 bit, didn't make a difference.
- Tried adjusting the "Document Raster Effects Settings". 9 out of 10 times adjusting that makes Illustrator crash (hard), but after getting it adjusted it had no effect.
- Everything has "align to pixel" on, but turning it off has no effect on the delay.
I this just one of the famous Adobe software annoyances I will have to live with? Or does anybody know a cause of this that I might be able to fix?
Cheers and thanks in advance.
Ben

Tnx for the input Mike, the graphic styles, brushes and symbols palettes are filled with the default fresh-install items. So very few in all of them (only swatches has more than 10 items at first glance). All other programs run fine, it's just Illustrator. The cpu spike to 100% of Illustrator (it's process) only happens on a "nudge" action. After that, it goes back to normal. I have no other heavy programs running. I ran the disk utility and repaired some permission errors (according to the log), there were no other errors there.
I am currently working in "normal" mode (the issue is currently gone because i re-opened it a couple of times), but if I happen to go into "slow" mode again, I'll recheck your list just in case.

Similar Messages

  • Error! Check Activation and Can't Delete Authorization, getting "Please try after some time"

    Hello,
    I am getting "Error! Check Activation" error message when I try to download epub from acsm file. I found that I should erase and re-authorize. When I try to erase authorization I get, "Please try after some time."
    I need a solution.
    Thanks.

    try this
    I can't de authorize my computer. It just keeps saying to try again later.

  • Yosemite: slow after some time

    This is my problem: Yosemite goes slow after some hours i started the system.
    I have to relaunch the operationg system to let it go normally.
    Anyone knows if it's a bug or just a personal problem?

    Found these errors in dmesg while transfering files:
    AppleYukon2 - bad packet received. length: 395, packet status bits: MII error
    AppleYukon2 - bad packet received. length: 1475, packet status bits: MII error
    AppleYukon2 - bad packet received. length: 1514, packet status bits: CRC error
    AppleYukon2 - bad packet received. length: 1514, packet status bits: CRC error

  • N73 got shuts down automatically after some time

    hi,
    my n73 music edition gets shut down after some time autmatically please can anybody tell me the reason.

    The reason is that nokia phones have many bugs and problems.
    A common cause of this problem is 3G. If the phone is in a weak 3G area the loss of 3G signal can cause the phone to reboot. It's an old problem thats been affecting nokia's for years. Disabling 3G can stop the random shutdowns.
    It may also be worth updating the phones firmware but this is a fairly risky procedure that can cause more problems than it solves.

  • How to handle TDMS -2519 error that appears after some time?

    Dear all,
    I am having two compactRio devices (cRIO-9074) that are applied for data logging and control. As is convenient, one deterministic loop handles the data acquisition, while another loop handles the data storage.
    The data storage loop basically creates a new TDMS file per data set that is subsequently stored to the disk.
    The whole software operates as expected for some time (at least one day without any issues), but then I get a File I/O error -2519 that is thrown by TDMS open. This error occurs after some time on both compactRio systems. How should I handle this error properly and what may be the probable cause?
    Upon system restart the error disappears and the system continues logging. Therefore, when having this error, I restart the system automatically, but this is to my opinion no proper solution. The fact that the error is cleared upon system restart, seems like it is a resource problem as outlined in: http://forums.ni.com/t5/Real-Time-Measurement-and/2519-error-trying-to-create-a-TDMS-file/td-p/26546... There they recommend using the FPGA programming mode to save on resources. However, I would like to continue using the Scanning Mode Interface instead. To better dedicate the processor resources, I changed the execution options of the different loops and gave Priority to the data acquisition and data storage loop. I also distributed the processes in different Execution Systems, to optimally divide tasks within the real-time processor.
    When I manually neglect the error (just clear the error in the data storage loop), the issue remains for the following data sets that need to be processed. So once the error is thrown, it reoccurs upon trying to store each subsequent data set.
    I also consulted http://forums.ni.com/t5/Real-Time-Measurement-and/tdms-2519-error/m-p/2569381/highlight/true#M13920 where the same error is reported and the solution is to update a .dll file in the installation. However, the installed software in my case appears to be okay. Also in that case, the problem occurred immediately, while in my case the problem arises after some time. Again this indicates towards a resource issue.
    Can you please provide me with some possible solution to overcome this problem? I am looking forward to your opinions. Contact me if anything is unclear within my explanation, or you need additional information.

    Hi gielvdbroeck,
    Good job for the perfect description and for the well researched topic!
    The first thing that comes to my mind is to Format and reinstall the software on the cRIO. This will make sure that you have a clean installation and there is no corruption in the OS.
    One more thing to get into account is the memory. If you do not have enough memory where to store the file it's possible to throw this error. 
    Best,
    Bozhidar

  • HT3964 My MacBook Air running on Snow Leopard gets extremely slow (almost like a hang, except if you wait about half an hr, it actually moves) after login interface. sometimes it never gets past the background. Cannot log back in.

    My MacBook Air running on Snow Leopard gets extremely slow (almost like a hang, except if you wait about half an hr, it actually moves) after login interface. Sometimes it never gets past the background of the homepage, desktop doesn't seem to load. After multiple forced shut downs and left to run for hours, sometimes the desktop loads but the dock does not respond when applications are opened. The computer is then unable to shut down normally. Forced shut downs are necessary most times. Time machine backup takes extremely long, and attempts to use the time machine to bring the laptop back to the time befiore the problem arose was met with extremely slow and hung time machine function.
    Please help!

    There isn't much besides a failing hard drive or other hardware fault that can cause those symptoms. Run the Apple Hardware Test, or just take it to an Apple Store for testing.

  • SystemD Values Get Reset to Default after some Time

    Hi,
    I'm using two machine as gateways and Keepalive HA load balancers, so I've enabled some kernel options, but after some time (the next day or so), these options have been reset to their default (disabled) values.
    Why does that happen, and how to stop that from happening?
    I have to reset the parameters each time. I could set up a script to run on a schedule, but I would like to prevent it from happening in the first place.
    These are the values which get reset to 0 (this time):
        net.ipv4.conf.all.accept_redirects
        net.ipv4.vs.conntrack
        net.ipv4.vs.expire_nodest_conn
        net.ipv4.vs.expire_quiescent_template
    Thank you.

    I didn't find anything in the journal, but I am curious about what I did find: every 1-3 seconds, there is an entry which is repeated: "sshd[<Number>]: Set /proc/self/oom_score_adj to 0". What does it mean? I've been scrolling for the last few days-worth of this message, and there is still more... I also have many attempts to log in via ssh from China, from multiple IP addresses, with various user names and many unsuccessful authentication attempts for root; maybe the entry is related to these attempts...
    Going back to the original discussion, I think I've seen someone mention a systemd service or something like that which resets kernel settings, or some other things, to their default values, in a post (here), but I didn't find it again. Is there such a service that does something like that?
    It is strange that since I started this thread, and since I reset the settings to 1, they have remained at 1. I notice that it happens irregularly.

  • How can i Delete all foto from my iphone and after some time get them one more time on it but not as a new album :)?

    How can i Delete all foto from my iphone and after some time get them one more time on it but not as a new album, i want them in the camera roll ?

    How can I delete EVERY THING off my Mac and have it like new?
    Boot from the software install DVD and do an "erase and install" when prompted.

  • My final cut is running extremely slow after having for 6 months.  I use external hard drives and save nothing on my computer.  it takes a long time to render now. do you think something is wrong with computer. took it to mac store but they fail to help

    my final cut is running extremely slow after having for 6 months.  I use external hard drives and save nothing on my computer.  it takes a long time to render now. do you think something is wrong with computer. took it to mac store but they fail to help me.  I have a 13 inch mac book pro 10.6.8 8gb 2.3 gfz intel core i5

    What did Apple tell you about what they did (or did not) find here?
    See if working on the main disk is any faster.
    USB2 is glacial, as I/O interconnects go.  And USB2 disks have been known to fail, or sometimes to drop back to USB1 speeds, too.  FireWire 800 is substantially faster than USB2, but still not as fast as the internal drive connections can provide.
    Put another way, start varying your configuration, and see which configuration changes (still) have the problem, and which don't.

  • I'm unable to deauthorize my computer.  Getting an error message "Unable to erase authorization.  Please try again after some time."

    I'm unable to deauthorize my computer.  Getting an error message "Unable to erase authorization. Please try again after some time."

    ok, please try below steps,
    1. Quit ADE.
    2. Choose Start > Run.
    3. In the Open text box, type regedit and then press Enter. The Registry Editor opens.
    4. In the left pane of the Registry Editor, locate the following registry key:
         HKEY_CURRENT_USER\Software\Adobe\Adept
    5. Right-click the Adept key and choose Delete.
    6. In the Confirm Key Delete dialog, click OK.
    Your authorization will be deleted.
    ADE will be deauthorized now.
    Now Authorize ADE again.

  • TS3899 After updating to ISO6, my email sending get extremely slow or dispeard. on the botton line of mail page always indicate "sending # of 9", however I do not know where to check or delete these unsent items. Please help! It has consumed lots of data.

    After updating to ISO6, my email sending get extremely slow or dispeard. on the botton line of mail page always indicate "sending # of 9", however I do not know where to check or delete these unsent items. Please help! It has consumed lots of data.
    I use @me.com and @hotmail.com

    Hi,
    >>A CHAR datatype and VARCHAR2 datatype are stored identically (eg: the word 'WORD' stored in a CHAR(4) and a varchar2(4) consume exactly the same amount of space on disk, both have leading byte counts).
    Ok, but on the other hands:
    [email protected]> create table x (name char(10), name2 varchar2(10));
    Table created.
    [email protected]> insert into  x values ('hello','hello');
    1 row created.
    [email protected]> commit;
    Commit complete.
    [email protected]> select vsize(name),vsize(name2) from x;
    VSIZE(NAME) VSIZE(NAME2)
             10            5
    [email protected]> select dump(name),dump(name2) from x;
    DUMP(NAME)                                         DUMP(NAME2)
    Typ=96 Len=10: 104,101,108,108,111,32,32,32,32,32  Typ=1 Len=5: 104,101,108,108,111Cheers

  • My I ph 5 once I start downloading anything it stops by itself in the middle or after some time ..

    My I ph 5 once I start downloading anything it stops by itself in the middle or after some time ..

    Hi Ravi4477,
    I apologize, I'm a bit unclear on the exact nature or context of your question. If you are talking about downloads from the iTunes Store, you may find the troubleshooting steps outlined in the following articles helpful:
    iTunes: How to resume interrupted iTunes Store downloads - Apple Support
    iTunes Store: How to delete a downloading purchase on iOS - Apple Support
    Regards,
    - Brenden

  • SAP instance getting stop after some time....

    Hi,
    Installed SAP on Cluster .SAP runs fine before and after switchover cluster when we do manually.
    Problems comes after scripting ,While starting SAP Instance with SCript its work fine but after some time instance get fail.
    And error comes
    15:09:55
    /usr/sap/SID/SCS01/exe/sapcontrol -prot NI_HTTP -nr 01 -function Stop
    05.03.2014 15:09:55
    Stop
    OK
    15:09:57
    Instance on host insapr3pi01 stopped
    15:09:57
    Waiting for cleanup of resources
    And it stop instance after some time.We are using Veritas (VCS cluster).Its continously search for cleanup of resources!!!!!!!
    Regards
    Adil

    Sap instance start by that script but after sometime it give message in cluster software that Waiting for Cleaning of Resources.And after sometime it shutdown that instance.
    Hi Adil,
    When an external application (in this case SAP NetWeaver) is clustered with VCS, there are options to execute scripts at various operation cycles of the VCS agent for the application in question.  I would recommend reviewing the application group configuration, corresponding VCS logs, as well as the path to the scripts and their content.
    I can assist from VCS perspective if the question still stands.
    Regards,
    Villi

  • My mbp (mid 2010) is running extremely slow after installing some mavericks updates on May 22nd.

    My mbp (mid 2010) is running extremely slow after installing some mavericks updates on May 22nd. Earlier I thought this behavior is due to spotlight indexing but it finished after 3 days. I deleted all caches from library. But no luck, still running extremely slow. I checked activity monitor for cpu usage, it shows above 90% is idle. The memory usage always shows PM - 4 GB, Memory Used 3.96 GB, VM - 4 GB, Swaped used 0 bytes, App Memory 1.82 GB, File Cache 1.44 GB, Wired Memory 480 MB.
    Thanks in adavnce for help.

    Was it the combo updater that was installed or the OS X 10.9.3 update. There is a difference.
    MORE INFO ON WHY RUNNING COMBO FIXES ISSUES
    Apple updates available from the Software Update application are incremental updates. Delta updates are also incremental updates and are available from Apple Downloads (software updates are generally smaller than delta updates). The Combo updates contain all incremental updates and will update files that could have become corrupted.
    Combo updaters will install on the same version as they're applying--no need to roll back or do a clean install. So if you think you've got a borked 10.8.4 install from a regular update, just run the 10.8.4 Combo Updater on that system.
    "Delta" updaters can only take you from one version to the next. For example: 10.9.1 to 10.9.2. If somehow the 10.9.2 is missing something it should have, and that something isn't changed between 10.9.1 and 10.9.2 it will still be stale after the delta update.

  • IE prompts credentials after some time and we get error rsHttpRuntimeClientDisconnectionError

    Hi all,
    Windows Server 2012
    Reporting Services 2012 SP2
    Internet Explorer 8
    After some time running a report the end user is asked for his credentials again with the authentication prompt.
    In the ExecutionLog we see the Client (IE) has its connection disconnected =
    rsHttpRuntimeClientDisconnectionError
    The server parameter are attached:
    We appreciate any clue.
    Thanks,
    Alex Berenguer
    Alex Berenguer

    Hi Alex,
    Per my understanding that you are running the report for sometime an then IE prompt for credential and you to this kind of error, right?
    Based on my research, the "rsHttpRuntimeClientDisconnectionError" error may occur if:
    Reporting Services creates the report and then goes to send it back to the client
    Reporting Services finds out that the connection has been closed and responds with the disconnection error.
    To resolve the issue, we can try to modify the TCP profile applied to the VIP. 
    Additionally, the issue may also occur due to a RESET coming from something between Report Server and the custom application. For example, an F5 NLB times these connections out on the either an HTTP or TCP level.
    If your problem still exists, please also check if you will got the same problem on the other browser(firefox),you can also provide us more details information about the
    TimeDataRetrieval,TimeProcessing,TimeRendering in the ExecutionLog table.
    Similar thread for your reference:
    ssrs Report taking to much time to load
    If you still have any problem, please feel free to ask.
    Regards,
    Vicky Liu
    If you have any feedback on our support, please click
    here.
    Vicky Liu
    TechNet Community Support

Maybe you are looking for

  • Need help in FCC - writing to FTP

    Hi, i have done this before but now i am stuck. I have following target structure for flat file: <?xml version="1.0" encoding="UTF-8"?> <MT_PRVO>    <PRVORecordSet>       <PRVODetStruct>          <PVNR/>          <PVADAT/>          <PVSTELL/>        

  • ITunes 9.02: Song playing but no sound

    Have had an odd problem on the last couple of iTunes releases. When listening either on my MBP or over AirTunes, a song will play with no problem and will end normally. The next song will queue up, and appear to be playing (the progress bar moves, et

  • What is the best way to display different array values to appropriate indicators?

    I am using DAQmx Read vi and its output is an array. I need a way to pass each value to an appropriate front panel indicator, so I can monitor each sensor. I tried using "Index Array" and passing the array element to the indicators but it looks slopp

  • Query string field based on "starts with"

    Is it possible to query a cache with a filter that does a "starts with" for a particular field or key? For example, if I want all objects that have a field/key that start with "do", it will return objects that have "do" "dog" "doggy" etc... thanx Kev

  • Hi. My iMessage is not working .....

    My iMessage is wating for activation..... since 2 days....... whats to do ? iPhone 3Gs. IOS 5.0.1 <Edited by Host>