Handling Mulitple apllications with Developer Suite 10g

Hi all,
I've a doubt regarding the Post installation of Developer Suite 10g. For example, if i've a client who has two applications; and these two applications are similar to some extent.
So, In this scenario, i am clue less regarding the set up. i.e.., Both applications can be run simultaneously, by different users. Can some one guide me. Currently, in Forms 6i, we've mapped
a drive for it and the client changes the mapping whenever, he wants to use another application. But in Forms 10g, I've heard that this can be done using configuratiion files. can u explain me
a little bit.
Regards,
Alok Dubey
Edited by: user583531 on Nov 3, 2008 3:58 PM
Edited by: user583531 on Nov 3, 2008 3:58 PM

Hello,
With Web version, you can add named sections in the /forms/server/formsweb.cfg file, then call one of this section in the calling URL.
http://machine:port/forms/formservlet?config=APPLI1or
http://machine:port/forms/formservlet?config=APPLI2Francois

Similar Messages

Running programs made with Developer Suite 10g or 11g

Hi everyone,
I have created a few programs with Forms Developer Suite 10g, but I don't know how to make the users run the application so they can start using the programs. Can anyone please help me on this?
I have always use Forms 6i which is completely different, but I don't know how to make this version work.

I have always use Forms 6i which is completely different, but I don't know how to make this version work. Oracle Forms 6i was the last version of Forms to run in Client/Server mode. Forms 9i and newer are "Web" only, meaning, you must have a web server configured to serve your Forms web application to client computers. Your web server must have Oracle Application Server 10g installed and configured correctly for your Forms application.
I recommend you take a look at the <a href ="http://docs.oracle.com/cd/B14099_11/index.htm">Oracle Application Server 10g Release 2 Documentation Library</a>. Start with the Server Concepts document.
Hope this helps,
Craig B-)
If someone's response is helpful or correct, please mark it accordingly.

Are BI Beans already installed with Developer Suite 10g R2?

I wish to use BI Beans in Forms Builder 10g R2. Do I have to download the BI Beans separately or it has already been included when I install Developer Suite 10g R2? Thanks.

If you are planning to use Forms against a relational data source then you will only be able to use the BI Graph bean as part of your development. The graph bean is automatically shipped with JDeveloper and there is no need to install BI Beans.
There are lots of examples of how to use the graph bean with relational data sources and these can be found on the following sites:
OTN Reports Home Page - Links to the FAQ on graphing
BI Blog - posting on how to use the graph bean
BI10gR2 samples - contains a JSP example of how to use the graph bean with a relational and XML data source.
Forms does not support multi-dimensional data sources so there is no way to use the other BI Beans components such as query builder, calculation builder, crosstab beans unless you are using a multi-dimensional data source which requires use of Oracle OLAP (preferably 10gR2).
What do you want to build with BI Beans?
Keith Laker
Oracle EMEA Consulting
BI Blog: http://oraclebi.blogspot.com/
DM Blog: http://oracledmt.blogspot.com/
BI on Oracle: http://www.oracle.com/bi/
BI on OTN: http://www.oracle.com/technology/products/bi/
BI Samples: http://www.oracle.com/technology/products/bi/samples/

Attach a file with forms (developer suite 10g)

Hi, can some one help me with these problem, i wants to attach a file , i wants to know how to doit with Developer Suite 10g
Thanks

you understand meNot really.
attach a file to a specific profile of a client in the application that we develop What exactly do you mean with "specific profile"? Is that a feature of your application? Or are developing custom forms in the eBusiness-suite?

Using Oracle Developer Suite 10g with the 10g Express Edition Database

I'm new to Oracle and I'm taking an SQL college level course using a text book entitled "Guide to Oracle 10g". Our text book came with Oracle Developer Suite 10g (9.0.4.0.1) but no database. We adopted the 10g Express Edition (XE) as the database. I have both the database and the Developer Suite loaded on Windows XP Pro. I've been using the database for months now and it runs fine and the Developer Suite installed OK.
However, I would like to use some of the Developer Suite apps (for learning purposes) with the database but I can't seem to log on to the database through the Developer apps when I open them and use my 10g XE database user-name and password. For starters, I would like to see if I could use the edition of SQLPlus (release 9.0.1.4.0) that comes with the Developer Suite because it has configuration options that are not available in the SQLPlus command line version that 10g XE contains (which otherwise works fine).
When I open SQLPlus (Developer Suite Version) and try to log on with my database user name and password (and no host string), I get the error:
ORA-12560: TNS:protocol adapter error
I did search the discussion forum first and also reviewed some Oracle pdf's including the concepts pdf but came up empty. I would greatly appreciate any suggestions on how to succeed or a determination of the compatibility of 10g XE with the Developer Suite. Thanks kindly.

I think your last idea might be helpful at this point and in case it matters, they are both installed on a sinlge machine (laptop). Thanks in advance:
Here is the Developer Suite tnsnames.ora:
# TNSNAMES.ORA Network Configuration File: C:\DevSuiteHome\network\admin\tnsnames.ora
# Generated by Oracle configuration tools.
EXTPROC_CONNECTION_DATA =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = HOSTNAME)(PORT = 1521))
(CONNECT_DATA =
(SID = PLSExtProc)
Here is the 10G XE tnsnames.ora:
XE =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = obw)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = XE)
EXTPROC_CONNECTION_DATA =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1))
(CONNECT_DATA =
(SID = PLSExtProc)
(PRESENTATION = RO)
ORACLR_CONNECTION_DATA =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1))
(CONNECT_DATA =
(SID = CLRExtProc)
(PRESENTATION = RO)
)

How to configure webutil 1.06 with oracle Developer suite 10g R2

Hello everyone,
My computer configuration is
OS-> Windows 7 Ultimate (32-bit)
RAM-> 1GB
I have successfully installed oracle XE and developer suite 10g R2 in my computer. Now i want to configure webutil. Please give me the step-by-step procedure for it.
Thanks in advance.

hi
plz search this forum u will find so many answered threads anyways.
plz read the following.
Webutil Settings
Requirements
·     Download Jacob 1.8 archive and webutil 1.06
(Download http://prdownloads.sourceforge.net/jacob-project/jacob_18.zip
   and extract to a temporary staging area. Do not attempt to use 1.7 or 1.9.
webutil can be downloaded from http://otn.oracle.com )
Database Setup
     Login as SYS
      create user webutil identified by webutil
              default tablespace users
                  temporary tablespace temp;
     grant connect, create session, create procedure, create public synonym to webutil;
     grant resource, connect to webutil;
     grant execute on dbms_lob to   webutil;
     login as webutl user and run
     create_webutil_db.sql
     create public synonym webutil_db for webutil.webutil_db;
     grant execute on webutil_db to public;
          set serveroutput on
declare
    a boolean;
begin
    a:=webutil_db.closeblob(1);
    If a then
        dbms_output.put_line('webutil/blob setup '||'TRUE');
    else
        dbms_output.put_line(' webutil/blob setup '||'FALSE');
    end if;
end;
copy jacob.jar and copy frmwebutil.jar to ORACLE_HOME/forms/java directory.
    Make sure you can download these using the below
     http://machinename.com/forms/java/jacob.jar
     http://machinename.com/forms/java/frmwebutil.jar
Create directory webutil under [OraHome]/forms/webutil and .
       copy jacob.dll , JNIsharedstubs.dll, d2kwutil.dll
     Check the permissions. Read /Execute
Forms.conf   AliasMatch ^/forms/webutil/(..*)
$ORACLE_HOME/forms/webutil/$1"
          http://machinename.com/forms/webutil/jacob.dll
          http://machinename.com/forms/webutil/JNIsharedstubs.dll
          http://machinename.com/forms/webutil/d2kwutil.dll
In the default.env update
     WEBUTIL_CONFIG=/opt/oracle/product/10gas/forms/server/webutil.cfg
       CLASSPATH=c:\temp\webutil\lib\frmwebutil.jar;c:\"Program      Files"\Java\j2re1.4.2_06\lib\rt.jar (Include rt.jar)
     Also include C:\Dev10g\forms\java\ frmall.jar
Settings for     webutil.cfg
     logging.file=c:\temp\webutil.log
     logging.enabled=TRUE
     logging.errorsonly=TRUE
     logging.connections=TRUE
     transfer.database.enabled=TRUE
     transfer.appsrv.enabled=TRUE
     transfer.appsrv.workAreaRoot=<Enter Directory /folder on Server>
     transfer.appsrv.accessControl=TRUE
     transfer.appsrv.read.1=<Enter Directory /folder on Server>
     transfer.appsrv.write.1=<Enter Directory /folder on Server>
Entry in the formsweb.cfg
[webutil]
     WebUtilArchive=frmwebutil.jar,jacob.jar
     WebUtilLogging=on
     WebUtilLoggingDetail=normal
     WebUtilErrorMode=Alert
     WebUtilDispatchMonitorInterval=5
     WebUtilTrustInternal=true
     WebUtilMaxTransferSize=16384
     baseHTMLjinitiator=basejpi.htm
     baseHTMLjpi=webutiljpi.htm
     #archive_jini=frmall_jinit.jar
     lookAndFeel=oracle
     form=WELCOME.fmx
     userid=webutil/Webutil$123@ORCL
     width=955
     height=545
     jpi_download_page=https://java.sun.com/products/archive/j2se/1.4.2_09/index.ht     ml
     jpi_classid=clsid:8AD9C840-044E-11D1-B3E9-00805F499D93
     jpi_codebase=https://java.sun.com/products/plugin/autodl/jinstall-1_4-windows-     i586.     cab#Version=1,4,0,0
jpi_mimetype=application/x-java-applet;version=1.4
Sign jacob.jar ( Not mandatory )
   Open a DOS command prompt.
   Add [OraHome]\jdk\bin to the PATH:
      set PATH=[OraHome]\jdk\bin;%PATH%
   Sign the file, and check the output for success:
      [OraHome]\forms\webutil\sign_webutil [OraHome]\forms\java\jacob.jar
[Previously this point stated that frmwebutil.jar also needed to be signed. This is no longer necessary and should not be done.]
Start Forms Builder and connect to a schema in the RDBMS used in step (4).
   Open webutil.pll, do a "Compile ALL" (shift-Control-K), and generate to PLX (Control-T).
   If the PLX is not generated, the Webutil.pll library would have to be attached with
   full path information to all forms wishing to use WebUtil. This is NOT recommended.
Create a new FMB.
       Open webutil.olb, and Subclass (not Copy) the Webutil object to the form.
        There is no need to Subclass the WebutilConfig object.
        Attach the Webutil.pll Library, and remove the path.
         Create a new button on a new canvas, with the code
               show_webutil_information (TRUE);
   in a WHEN-BUTTON-PRESSED trigger.
        Compile the FMB to FMX, after doing a Compile-All (Shift-Control-K).
   Under Edit->Preferences->Runtime in Forms Builder, click on "Reset to Default" if
            the "Application Server URL" is empty.
   Then append "?config=webutil" at the end, so you end up with a URL of the form
     http://server:port/forms/frmservlet?config=webutil
Compile the webutil.pll and attach it to the fmb. Compile it
Debugging
Clear the browser cache and enable the jinitator / sun java plugin.
For Sun Java Plugin
Start ->Settings ->Control –Panel->Java->Advanced ->Show Java Console
Debugging ->Select All
              Clear the plugin cache and once again access the URL. Make sure all the dlls,jar files
are getting downloaded.
FRM-92050   failed to connect to server /forms90/;90serlvet -1
   oracle.forms.net,connectionexeption : form session failed during startup.
Java console shows -
When you are not able to download the webutil.jar file
java.lang.ClassNotFoundException:
java.io.IOException: open HTTP connection failed.
     at sun.applet.AppletClassLoader.getBytes(Unknown Source)
     at sun.applet.AppletClassLoader.access$100(Unknown Source)
     at sun.applet.AppletClassLoader$1.run(Unknown Source)     at
java.security.AccessController.doPrivileged(Native Method)
at sun.applet.AppletClassLoader.findClass(Unknown Source)
Cause
Ensure that the ORACLE_HOME in the .Env file points to a correct home.
Frm-40735 when-custom-item-event triger raised unhandled exception ora-06508
Cause
Ported webutil to Unix . The form appears , but when a call is made to webutil
functions, it resulted in the above error .The reason was PLL was not compiled
on unix .
Reference
Metalink Note 418970.1 ORA-06508 When Starting Webutil
Read / Write - image file
The code was not erroring out, but the image was not getting copied in the
image item .
Cause
transfer.appsrv.workAreaRoot=<name of the temp directory >
transfer.appsrv.accessControl=TRUE was not specified in the webutil.cfg file
The root of the location in which WebUtil can store temporary files
uploaded from the client.
While Writing Image file ( remember its the client to which the image
is written to ).
Example
client_image.write_image_file('d:\myimg\','GIF','CTRL.MY_IMG',
maximize_compression,     original_depth);
Then ensure that on the thin client , there exist a directory called as "myimg" in the D drive .
One should watch out for the error in the console or the log depending on how
the logging has been set to .In case if the directory does not exist on the
client message appears that cannot create a file ...
These are the steps that occurs -
1) WebUtil creates a working directory that is private to the user
on the applciation server using the value of transfer.appsrv.workAreaRoot
This is that <ipaddress>\<ntuser name> directory
2) The basic forms Write Image file is used to extract a temporary copy
   of the image into that directory.
3) The image is downloaded into the client machine and saved as the name
   that you specified as the filename in the write_image_file command.
4) The temporary copy of the image held in the workAreaRoot on the Appserver
   is cleaned up.
4) Client_host - The command is supposed to run the executable on the client .
   But if you are trying to call an exe which is not in the path , you will not
   get any error.
Error Message while opening the fmb in the forms builder
Add jacob.jar and frmwebutil.jar to CLASSPATH or FORMS_BUILDER_CLASSPATH ... otherwise there is an error message when opening the canvas in the new created fmb
{code}
hope this helps u.
sarah

Problem with Oracle Developer Suite 10g

Hi,
I have installed Oracle Developer Suite 10g. When I try to open the rdf file with the report builder, the error message "REP-0756: Warning: Unable to find PL/SQL library 'SHARE_RP'" shown.
Does anyone know how to resolve this? Thanks!

Try this thread: REP-0756: Warning: Unable to find PL/SQL library 'FARSV' and 'fadolif'

Running more than one report at a time using Developer Suite 10g(10.2.1.0)

Hi all,
We are using the Developer suite 10g(10.2.1.0). I'm finding it exciting to work with it. I'm facing the problem with report server. For example I'm trying to run two reports at a time from two different locations, the report server starts working on first report and the second report will be in queue. In 6i it was not the case. so i need such a scenario. where in the two users can take the reports concurrently instead of this FIFO method.
Regards,
Alok Dubey
Edited by: Alok Dubey on Dec 15, 2008 5:22 PM

Hello,
By default, the reports server is configured with 2 kinds of engines :
The default reports engine and the "URL engine" :
For more details about the "URL engine " :
http://download-uk.oracle.com/docs/cd/B14099_17/bi.1012/b14048/pbr_conf.htm#i1007633
3.5 Configuring the URL Engine
Thie "URL engine" has a minEngine=0 and maxIdle=30 :
<engine id="rwURLEng" class="oracle.reports.urlengine.URLEngineImpl" initEngine="1" maxEngine="1" minEngine="0" engLife="50" maxIdle="30" callbackTimeOut="60000"/>
It means that if the "URL engine" is not used, it will be stopped after 30 minutes.
That's why you can see 2 engines just after having started the reports server and only 1 engine 30 minutes later
Regards

Installation of Developer Suite 10g in Linux

Hi,
I've done the configuration of Developer Suite 10g on Windows OS. But i want to know how can i configure the Developer Suite 10g in Linux platform.
Any link for this would help me a lot.
I have done some configuration, but i'm facing some problems with it. Like i've compiled the form in windows version, but when i try to compile the form in
linux, i'm facing the problems. In the form there are some libraries attached to it. When compiled in Windows, it got compiled successfully, but when i compile it
in Linux, it is unable to find the procedures and function in the libraries. To come out of this situation, i've placed all the libraries and the forms in a single folder. still
the problem exists. It is giving an error saying that the Invalid identifier, whereever i've mentioned the procedures/functions of libraries. Even in windows, i've all
the forms and libraries in the same folder.
Regards,
Alok Dubey

First of all which Linux....????I am successful in installing it. It is Redhat Linux 5.0 Enterprise edition. But i'm facing the problem in configuring it.
I checked out from Oracle web site, this linux version supports the Developer Suite 10g. If u can send me any document
or any link which u felt that it is very useful, then Please let me know.
Have you checked if it is registered with DevSuite10g...???How to check this ..
"I have done some configuration.."
Which....????
I've set the forms path so that i can run the forms using the url in the browser. But i feel that my configuration is incomplete. As i've mentioned already that when my form is
compiled in the windows, it is getting compiled. But when i compile in linux, it is showing the error like Invalid Identifier. Here the Identifier name it is dispalying is the name of function(Which
is in the attached library).
Regards,
Alok Dubey
Edited by: user583531 on Oct 23, 2008 4:06 PM

Problems installing Oracle Developer Suite 10g in windows 7

Hi Experts;
I have installed Oracle Developer Suite 10g in windows XP, but now I change to windows 7, 64 bits, I was trying to install this product and I'm having a lot of problems, apparently this product is not compatible with windows 7.
My question is, is there any product, like Oracle Developer Suite 10g for windows 7? I was looking for in the Oracle page, and I couldn't see anything, may be the name is diferent.
Thanks for your help.
Al

First off, Oracle Developer Suite (ODS) 10g is no longer supported so Oracle has discontinued improving the product. While ODS is not certified by Oracle for use on Windows 7 (32 or 64 bit), you can install and use on Windows 7 (32/64 bit). This is a commonly asked question so a search of the forum would have given you several solutions.
The limitations of the Oracle installer are:
1. You must have Administrator rights to install.
2. Windows 7 is not a supported version (it's version 6 and it is looking for version 5), so the installer exits.
3. It's unable to recognize Windows Managed virtual memory.
To get around these limitations you must do the following:
1. Modify your Virtual Memory settings and define a specific Min and Max amount. Look at this MS article if you need help making this change: http://windows.microsoft.com/en-us/windows7/change-the-size-of-virtual-memory
2. You must run the Oracle installer in compatibility mode for Windows XP. To do this,
- Right-click on the setup.exe and select the Compatibility tab and click "Run this program in compatibility mode for: Windows XP SP2"
3. While still in the properties and the compatibility tab, select the option, "Run as Administrator" and click OK.
Now run the Oracle setup.exe and your installation should succeed.
Craig...

Oracle Developer Suite 10g on Windows 7

Hi. Does anyone know if running Oracle Developer Suite 10g (10.1.2.0.2) on Windows 7 is supported?

This is a very common question in the Forum. Oracle Developer Suite (ODS) 10g R2 (with patchset 3: 10.1.3.0.2) is supported on Windows 7 32-bit. Last I checked, it was not supported on Windows 7 64-bit. Keep in mind, that this is just for the developer install of ODS. Version 10.1.2.0.2 is not supported, but it will work. Just follow the instructions installing on Windows Vista (search the forum - there are many posts on this topic as well).
The client application is supported on all versions of Windows (32 or 64 bit).
Hope this helps,
Craig B-)
If someone's response is helpful or correct, please mark it accordingly.

Unable to install Oracle Developer Suite 10g on Windows 7

Hello,
I'm getting the following error message when using OUI on the Specify File Locations screen after providing source and destination:
Invalid staging area. There are no top level components for Windows NT, Windows 2000 available for installation in this staging area.
Anyone else have this happen while trying to install? I see that a few people have been successful in getting it installed. The destination was provided by default as C:\Program Files\Oracle\Inventory.
Any help would be appreciated - thanks in advance.

The Oracle Developer Suite (ODS) 10g is now certified by Oracle for installation on Windows 7 (32-bit). For installation steps, I recommend you take a look at My Oracle Support article: *How to Install Oracle Developer Suite 10g (10.1.2) on Windows 7 (32-bit) [ID 1292919.1]*. There is no need to run the XP-Mode (Virtual PC) of Windows 7 in order to install and use ODS on Windows 7.
Invalid staging area. There are no top level components for Windows NT, Windows 2000 available for installation in this staging area.This error could be caused by many things. I've seen two. The first (as I recall) was caused by an issue with one of the files in the Inventory directory. We were able to get around the issue by deleting a file (I'm sorry, but I don't recall which file or if we simply deleted the directory). I recommend you check with Oracle Support before you delete any files or the directory, however.
The other issue I've seen cause this is "spaces" in the directory path to the installer. This was the most common cause that I've seen. Make sure there are no spaces in the directory path where the installer is located.
Hope this helps,
Craig B-)
If someone's response is helpful or correct, please mark it accordingly.

Application Express Vs developer suite 10g

Hello
I am a beginner and I am confused which application package I have to use to build
my application consisting of forms and reports.
Can someone please highlight the difference in applications created using
application express and developer suite 10g.Their advantages and which one is
preferred with oracle 11g database as backend and its support with OS windows vista.
Please help us.Since we are planning to upgrade our old software developed
using oracle 8i and developer6.0
Thanks in advance

Thanks for your suggestions.
Please suggest us once again how to proceed in our environment.
Actually we have developed an in-house erp package consisting
of different modules for production, finance, inventory .There
are many forms with many fields and customised reports and plenty of data entry.
As per your suggestion we can use Developer suite 10g by doing
one is to one migration with some modifications as required by developer suite
and moreover it is used only locally in intranet.This also needs a browser.
(this will be faster compared to APX since we have to redo all the forms
and reports from the beginning which will take time.).
Our doubt is, can we make our application (developed using developer suite)
web enabled later on without going for APX so that we can access our application
from customer or remote site through internet.
In that case what will be the requirement and how do we go about in making
our application web enabled.
Thanks once again for your valuable suggestions.

Using Oracle Developer Suite 10g Without the Oracle Database

I have never used Oracle, but have used MS SQL Server 7. I need to learn Forms. An Oracle salesperson suggested I download Oracle Developer Suite 10g (the demo product). It includes the Oracle Developer Suite (with Forms Developer), and many other programs.
The salesperson said it includes a database server, but I suspect it does not. I only downloaded the package last night, and have begun to skim the documentation, but I see nothing that looks like a database server.
In SQL Server 7, the database engine is run as a service and you create and manage your tables (do all the database admin stuff) using SQL Enterprise Manager.
So, does this package include a database engine/server? Or must you also have the Oracle Database?
I don't see a demo version of the Oracle Database - is there one?
Thanks in advance for any help.

Hi,
The Developer Suite does not contain a demo version of the Oracle Database.
You can download the database from this page:
http://otn.oracle.com/software/products/oracle9i/index.html
Vincent

Oracle Developer Suite 10g (10.1.2.0.2)

Hi,
with Oracle Developer Suite 10g (10.1.2.0.2) can we developpe for E_BUSINESS 11.5.10.2 (Oracle APPLICATIONS) with 9.2.0 DB?
Otherwise which (most last)version is compatible with E_BUSINESS 11.5.10.2 (Oracle APPLICATIONS).
Should we installe it on a user workstation (developper) ?
Many thanks

You are in the wrong forum. Please repost in one of the Applications/EBS forums.
cu
Andreas

Handling Mulitple apllications with Developer Suite 10g

Similar Messages

Maybe you are looking for