Handling Unit - Storage Location

Hi,
  Finished product is lying against sales order in a particualr
storage location eg: 1000  . Is it possible to create handling
unit through Outbound delivery in the same storage location .
If it is possible is it the right method to do.
Awaiting for reply
Regds
Tresea

Well if you want to Pack HUs for Outbound Delivery in a HU managed Storage Location (SLOC 1000 for ex) then make sure that the SLOC is not Warehouse Managed with Storage Unit Management activated.
Just performing HU operations at SLOC level is fine. But once you activate WM with SU Mgmt you need to create Partner Storage Location (virtual) to perform Pack-Unpack operations.
Reason being - you cannot perform Pack operations on a SU but on a HU only.
Read some more on the usage difference between SU-HU to help understand this.
Let me know if u need some specific info.
thanks.

Similar Messages

  • Outbound del: handling unit creates pack item

    Hi,
    I want in the delivery an extra line when I create a handling unit. Is this just one setting in customizing?
    I know I have to create packing instructions and a verp material, but I want to know how to activate the extra 9000 line with
    the packing material.
    Thank you in advance,
    eric.

    Have you solved your problem yet?
    If the message "Handling unit xxxxx contains an item that cannot be assigned" occurs,
    First: you should check, that the picking storage location of the delivery is the same than the one, where the batches and Handling Units are located.
    Second: check the amounts. Are you sure you have the right ones and you are not trying to pick kilograms "KG" when you should pick tons "TO"?
    I had this message also several times and mostly it was due to the mistakes, described above.
    BR

  • Sales order same plant different storage location

    Hi
         We are doing a sale order for a material that is storage in two storage location.
    Storage location A:
    2 units
    Storage location B:
    3 units
    We did a sale order for 5 material. Stock availability asigned 5 unit in one position of the purchase order. Then the system create just one delivery for 2 units.
    Which procedure or customizing we have to do to get two deliveries, one for each storage location.
    Thanks in advance for the help
    Regards
    Enzo

    thanks SAJU SOM
    We need to create two deliveries from one sales order, that have quantities for differents storage locations.
    Example:
    Sales order A: 5 units
    We have, 2 in storage location C and 3 in storage location D under same plant. The storages locations are in differents places, so we need two deliveries, one from C and the other one from D.
    I suppose that this situation is normal and occurs in many companies.
    So, we have to create a sales order with 2 positions, or the system split the deliveries during deliveries creation?
    I think the system should split the positions automatically in the sales order creation.
    Thanks for your help
    Regards
    Enzo

  • Creation of new handling unit management storage location

    Hello
    I am using transaction HU02 and create a handling unit from existing material. But i don't have any HU management storage locations in the system.
    Could you please explain me how to create a HUM storage location?
    Thanks,
    Ilya

    Hello,
    I am trying to create new Handling unit, with HU02 t-code, and i am getting the following errror:
    The number range object 1 does not exist
    Message no. NR002
    Diagnosis
    The number range object was not defined.
    Procedure
    Maintain the specified number range object using Transaction SNRO.
    I've customized number range for object LE_SSCC in SNRO.
    Сould you please advise, what is my mistake?
    Thx in advance

  • Re : No items or handling units to be placed in storage could be determined

    Hi
        While doing transfer order i am getting the following error.
    " No items or handling units to be placed in storage could be determined "
    How to solve this.
    Thanks
    Anto

    hi,
    In case of returnorder there is no need to create LT03,directly u give the Returnstorage location in Delivery process VL01N ,so picking tab will be in normal mode ,so u can enter the quantity directly.
    Hope this wil work for u
    Thanks

  • Simple Storage unit management by using of 'real' handling unit data

    Hi all,
    actually we have a WM setup to use the full handling unit management in Warehouse. After some years we detected that the HU managed
    Warehouse is not the best solution for our business.
    Inside of WM we do no more want to have the Handling units. The assigned storage location is not HU managed.
    Now to my question:
    We receive from other plants finished goods via inbound delivery. All goods are packed on Handling Units.
    When doing the good receipt, Is it possible to use the HU data (vekp, vepo) and create according to it the WM storage units? So one Handling unit
    from the inbound delivery will become one storage unit.
    thanks in advance for your answers.
    Michael

    Hi Patrick,
    we actually have SAP WM with HU management running. but we want to go back to WM without HU management - only with the storage unit management.
    when getting an inbound delivery from another plant (in the same client) goods are batch managed and packed on HU´s. i am searching for a possibility to use the HU data from the inbound delivery to create the WM storage units. So one HU should become one WM storage unit.
    so i will post to an ERP comuity.
    thanks
    Michael

  • How to get Storage unit and Warehouse number from Handling Unit.

    hello all,
    I have Handling unit and Material in my program as an input, using these two fields i have to get corresponding storage unit and ware house number, to pick up transfer order.
    Can anybody explain me who can we get Storage Unit and Warehouse Number from Handling Unit.
    I know we can pull transfer order from table LTAK & LTAP using warehouse number.
    But i dont understand how to get warehouse number from handling unit.
    There is table LSUTO which has warehouse and Handling unit relation, but in our system there is not data maintained in that table. So, i was just wondering how can i get warehouse number from the given handling unit number.
    please guide me
    thanks
    Edited by: Mr A on May 12, 2008 1:23 AM

    Hi ,
        Check out the handling unit item table VEPO. You got storage location(LGORT) in it.
    Reward points if it was useful.
    Regards,
    Abhishek

  • No items or handling units to be placed in storage could be determined

    Hello everybody,
    I am trying to do an exercise (Handling Unit Management in Shipping) from my SAP Education book (IDES model company), which tells me to create an inbound delivery (VL31N), use a vendor to find a purchase order for a certains material and pack it.
    As I couldn't find any purchase order I create one and, afterwards, the inbound delivery/shipping notification.
    As I couldn't pack the item in the shipping notification I was suggested to take off the flag on the "Set Unique Number Assigniment fot HU Identification", according to OSS SAP Note 536069.
    After that I could pack the item in the Shipping Notification but now I cannot create the transfer order.
    The following message arises:
    "no items or handling units to be placed in storage could be determined"
    Please, can anybody help me?

    It looks there is a program error. Check OSS Note 1124121 - HU packed in inbound transport troubles WM activities.
    Since you are in IDES, try to create the TO using t.code LT09.
    Regards,

  • Number of Storage location Manufacturing unit or tank wise

    Dear ALL,
    In a single plant i am having 4 manufacturing unit, and the raw material stock is maintain and monitored by 4 manufacturing unit wise.  Also in each manufacturing unit number of tank availble to store material.
    I am having 6 plants and in each plant no of manufacturing unit and in each manufacturing unit number of tank.
    Client want to track material by manuf unit and tank wise.
    It not looking feasible to generate storage location manufacturing unit wise or tank wise.
    Please suggest how to work out.
    Thanks
    Akshay

    Hi Akshay,
    As in total you are having six plant belonging to a company code and in each plant you have 4 manufacturing units in which you have tank to store material.
    The storage location key only has to be unique within a plant , you can  use same storage location keys in each plant as per the raw material in each tank where it is stored.. By this you can define the storage location key according to the function of the storage location and set up uniform storage location structure for all plants.
    For example for plant 2000  you can define storage location as per material . If you have define for plant 2000 5 storage location 0001, 0002,0003,0004 based on material . You can use same keys in other plants to make it material specific.
    Regards,
    Tushar Patankar
    Edited by: Tushar Patankar on Sep 27, 2009 2:57 PM

  • Creating a Storage Handling Unit With The Same # As A Storage Unit

    Hello dear WM and MM experts,
    I'm beginning to use Handling Units and Storage Units. From what I've been reading, it seems like you can have a HU enter the warehouse in the form of a SU with the same ID#. Is that correct? If that's the case, what transaction(s) is used to create the SU using the same ID# as the HU.]
    Basically, I have a pallet with product on it and I'd like to know how to have a SU and a HU with the same ID# to be able to handle this pallet in both WM and MM.
    Your input is greatly appreciated.

    Hi Oscar,
    In the shared thread reply from Sushant wanjari talks about both the scenario when HU management is active and when HU management is not active
    Basically i am summarizing the response provided by Sushant  "In the case where HU management is active and you want to carry HU number as SU number. No need to define the SU number range in the system. SAP recommends only activating length conversion for storage unit numbers. Note, that this setting is made at client level, and is therefore valid for other warehouse numbers in the same client.
    Inbound delivery for which Putaway TO needs to be created
    HU in the inbound delivery
    During TO creation system propose the same HU number as SU number
    Hope this helps. Please let us know if you need any further input on this

  • Storage location and post.chge storage location not in the same warehouse

    Hi All,
    We have HU managed Storage Location, and in this Storage Location we have SUT managed Warehouse, Now while Goods Receipt we have to create inbound delivery, which is working fine and i can see my stock in Goods receipt area,, later on whicle creating Transfer Order to putaway in a bin i have a error message "Storage location and post.chge storage location not in the same warehouse" please help me with this error message. Thank you for all your inputs.
    Regards
    Samuel

    Hi Nagesh,
    Thank you for the input. I am receiving Stock from vendor and while creating Inbound delivery i created the Handling Unit and also packed it and i could also post it (PG Receipt). Now when i am creating TO i have that error message. The Storage Location where i am receiving is 9001and i have also maintained the partner Storage location,,, its like this Plant(1000)-SLoc(9001)-Partner SLoc(9002).... now the Storage Location 9002 is not HU managed,, the reason i gave this Storage location is, initially i gave 9001, but system said "Storage Location 9001 and 9001 must have different management systems". So now kindly tell me what is the purpose of the partner Storage location and which storage location should i give, as my partner Storage location across "1000-9001-????" thank you again for ur inputs.
    Regards,
    Samuel

  • Goods receipt on a PO from handling unit

    I need to do GR on a PO from a handling unit. Basically i plan to create a handling unit when the goods are received, pack the materials that are received into this HU and post the GR with this HU against the PO.
    I want to avoid the inbound delivery for the PO.
    i planned to use VLMOVE but unable to add the movement type 101 to handling units tab. Can you please guide how to add this.
    The other option that we are considering is doing it through ABAP but we have not found any BAPI for this. Please help if you have some idea on this .

    Hi,
    You can not use VLMOVE with 101.
    If you want to avoid the inbound delivery, you need to :
    receive the materials on a MM storage location that is not HUM managed,
    create the HU with HU02 on the MM storage loc
    and then do a VLMOVE from this MM storage loc to your HUM storage loc with movement 311.
    I did it on one project. Works well.
    But inbound delivery is better from my opinion.
    Rgds,
    Philippe

  • Goods Receipt with respect to Handling Unit (Transaction u0096 MIGO)

    Hi All,
    A delivery is created for stock transport order for goods movement from Plant XXXX (Storage Location – YYYY) to Plant XXXX (Storage Location – ZZZZ).
    Handling Units are packed on delivery and delivery is post goods issued from Plant XXXX (Storage Location – ZZZZ).
    While posting goods receipt (Transaction – MIGO) without selecting “Via Handling Units” system populates the “packaging material” line item whereas when “Via Handling Units” is selected (in other words – when tried to post Goods Receipt with respect to Handling Units) system doesn’t populate the associated “packaging material”.
    Requirement is to populate “packaging material” line item while posting Goods Receipt with respect to Handling Unit.
    Plz guide me.
    Satish

    Hi Vatcan,
    Chek the Inbound Delivery 1st weather you refer the right PO in it
    You can also chek in  PO i
    1 Me23n Go to confirmation tab here you can see the  Inbound delivery  quantity
    2 Chek  which reference document you recived the goods,  (i.e You recived the goods with reference to PO or  Inbound delivery)
    2 Coz if you refer the inbound delivery then syestem will deafult show the inbound quanity
    And yes the actual quanity will update in inbound delivery if you refer the inbound deivery while reciveing the goods

  • Outbound Delivery and Storage Location

    hey everybody,
    this is our status quo:
    we create a outbound delivery based on a sales order & at the end of the creation of the delivery we are doing the goods issue immediately to do the material movement. we do that, because we need a material document for the physical packer in the storage. at the start of the physical packing he gives this material document to the person in the warehouse and this person picks the needed material.
    we need a solution for our new scenario:
    in the future we want use handling units within deliverys. in these HU's we want to pack the material included in the delivery note.
    here are the steps:
    1. outbound delivery creation
    2. we need a material movement (material document) from one storage location (A) to an other storage location (B)
    3. the packer is packing the material physical and within SAP in the new created handling units
    4. when the packing operation is finished, the packer gives information to SD person and the goods issue will be done. material movement will be done from the storage location (B).
    does anyone has an idea for us?
    another information: we don't want to do the material movement manually
    best regards & TIA
    chris

    Dear,
    As per standard SAP , once you assign the storage location in OUTBOUND DELIVERY, system will tend to pick the storage location assigned to it.
    But as per your client requirement, you need to do the transfer posting from one storage location to other storage location and then you would like to post the "Goods issue" from the new storage location.
    If it has to be done, you need to update the "Outbound delivery"  with new storage location before posting the  goods issue.
    Is there any business advantage with this new process,If  so i can suggest you one work around if you are doing transfer posting with respect to "Each out bound delivery"
    Details  as Follows:
    Step-1:
    While transferring the stock from one storage location to other storage location(Movement type:311 single step), mention the out bound delivery number in "Document header text" or "Material Slip".
    Step-2:
    Then take a report of those transfer posting documents and then update all the outbound deliveries for new storage location.To update in mass, you can set BDC with the help of ABAPER
    Step:3
    Then do "Post goods issue".
    Regards,
    pardhu

  • Handling Unit Management and supply areas with WM/control cycles

    Dear all,
    has anyone come across the issue how to handle a replenishment process for production with supply area within WM and Handling Unit Management?
    Normally a supply area is being staged via control cycles. in the supply area, all storage units get lost (standard functionality as far as I know). When we post the GI, the components will be taken out of the supply area, backflushing is not allowed as far as I know.
    Now: what happens if HUM is switched on? Do we have to enter a HU for these GI's as well? Or does the supply area  keep the information of the SU/HU? I want to avoid that the users have to tell the system the HU no. for every screw they take/consume...
    Thanks & regards
    Christian

    Hi,
    (as already described,)
    it is possible to use handling unit management together with lean        
    warehouse management. You activate handling unit management independent  
    from storage unit management (that is only possible in case of full-WM   
    as far as I know).                                                       
    Only in case if storage location is full-WM- AND HU-managed the storage  
    unit management is always active and HU numbers are taken over as SU     
    numbers. In all other cases HUM and SUM are independent from each other  
    and number ranges must be set a way that they are not overlapping.                                                                               
    Regards,
    Ely

Maybe you are looking for

  • How to change the default structure when exporting data in CSV format?

    Hello, can some one tell us how to change the default structure in CRM when exporting lists in CSV format (with Option "Always use unformatted list format (CSV) for download" ? Because we want to add a new structure for our own -is it possible ? If i

  • Rescuing deleted emails from Outlook Express 5 for mac

    Dear Forum Wasn't quite sure where to post this, but I would be grateful if anyone could cast some light on the following puzzle. I am trying to retrieve deleted emails from Microsoft Outlook Express 5 Macintosh edition (vers 5.02 2022) running on a

  • Unwinding previous depreciation amounts for an asset

    Hi, We have an asset that is getting depreciated for the past few months. But now we realized that the asset should never have gotten depreciated and we unchecked the depreciation box. Is there a way to unwind all the previous depreciation amounts. T

  • IDOC FOR TCODE F110

    Hi GURUs, 1. I want to know whether there is any  IDOC  availlable for TCODE : F110 (payment run). 2. After payment run i want to download the file in text format ,so is there any way to download the file by using IDOC. Thanks for your help.

  • Installing 9.1 on g4 533

    I have a friend who asked me to upgrade his macs cpu. I need to update the bios because it is not the correct version(I checked already) I first tried to install os9 on a hd i didnt need that was laying around. It doesnt seem to want to boot of the c