HAP_PDF_OFFLINE_FORM - pdf preview not visible

Hi ,
I opened the standard HAP_PDF_OFFLINE_FORM  but when i am seeing this form i am not able to see the PDF preview
of this form .
Could you please let me know what could be the reason .
ADS is installed in my system . I can see the body in the layout but not the master and PDF preview .
Please provide your input on this issue .
Thanks ,
Omm

Hello ,
   The reason for this is that the fields of this form get populated on runtime .
You are not able to see the PDF preview as many field properties presence has been set to hidden .
You can also check XML source of the same.
Thanks,
sahiba

Similar Messages

  • Items visible in PDF Preview not visible in Design View

    Hello-
    I used the auto create function to turn an existing PDF info a fill-in able PDF. Auto create "auto detects" form fields, including in some areas of the form that are not fields at all (blank areas, etc.). I go into Design View and remove any extra fields. However, I've discovered there are some fill-inable fields visible in PDF Preview and in the actual PDF itself (once saved) that are not visible at all in Design View- thus I can't click on them and delete them- they just aren't visible in that view. I've read the forums and it seems the opposite problem is more common, in which something shows in Design View but does not show in PDF Preview or in the final PDF.
    Any guidance on what's going on? Next steps? I'm not a coder, so the simpler the better. Thanks to anyone with suggestions.

    All the fields on your form are listed in the Hierarchy which is generally on the left-hand side of your screen. In there you should be able to go through each field and delete the ones you don't need.

  • Form guide's preview PDF button not visible in Firefox

    Don't know if this is a silly question but when I preview form guides in Firefox then the 4 top-right buttons (including Show/Hide PDF) doesn't appear. I have confirmed that I selected the "Include PDF preview" option. In IE everything works fine, so I'm assuming it has something to do with Active X.
    I did have a look at the generated html, but couldn't really get much wiser. Any ideas?

    Hi Vijay,
    Goto:
    Universal Worklist Content Configuration -> Click to Administrate Item Types and View Definitions
    In the table under the "Current Configurations" tab, select the standard travel configuration provided by SAP -> "com.sap.pct.erp.mss.tra".
    Here, search for the code of the task for which everything is working fine; in our case it was TS20000118. Copy this piece of code.
    Now download the currently active XML configuration. In the saved XML file, search for the task code which is not working as expected. Replace this piece of code with the code copied in the above step. Save with a different name.
    Upload this new configuration with HIgh priority.
    Reregister the connector and clear the cache.
    These steps solved my problem. Probably it should work for you too.
    Regards,
    Shashank

  • Acrobat Pro X PDF previewing not working in Windows 7 64-bit

    Greetings, all,
    The organization I work for recently purchased a volume license for Acrobat Pro X.  We uninstalled Adobe Reader from all of our machines and installed Acrobat Pro X on them.  After the move, the PDF preview handler stopped working.  People commonly link to the URL below, but it has not worked for us.  It appears it only works for the PDF preview handler packaged with Adobe Reader, not the one packaged with Acrobat Pro.
    http://www.pretentiousname.com/adobe_pdf_x64_fix/index.html
    Users are unable to preview PDFs in Windows Explorer and Microsoft Office Outlook 2007.  When attempting to preview in Windows Explorer, the following appears:
       This file can't be previewed.
    What can we do to get the preview handler working in Windows Explorer (Windows 7 64-bit) and Office Outlook 2007?
    Thanks in advance!

    Bill@VT wrote:
     OK. Then do you mean the thumbnails in Windows Explorer? I don't have a solution for that, but there have been several posts about the issue.
    Well, thumbnails in Explorer don't work either, but we're not concerned about it.  The preview pane is what we're worried about.  There is a button in the top-right that turns the pane on.  Previewing in Outlook does not work either.
    Sabian Zildjian wrote:
    Check the value for AppID in this registry key:
    [HKEY_LOCAL_MACHINE\SOFTWARE\Wow6432Node\Classes\CLSID\{DC6EFB56-9CFA- 464D-8880-44885D7DC193}]
    What do you have?
    {534A1E02-D58F-44f0-B58B-36CBED287C7C}
    DisplayName is set to "@C:\Program Files (x86)\Adobe\Acrobat 10.0\Acrobat\pdfprevhndlr.dll,-101".

  • PDF previewer not working in Outlook

    All,
    I have recently updated to Adobe reader 11.0.10, I can now open the documents I was not able to open, but the previewer in Outlook stopped working. The error I get is that the doc is not supported by my currect reader and that I have to upgrade to the latest
    version. I have done everything that people suggest on the web - trust center settings, etc., but I have not been successful. Has anyone encountered the same issue and do we have a solution?
    Any help is greatly appreciated
    My details: Win 7 Ent / 32 bit / Office 2010 / Adobe reader 11.0.10
    Thanks

    Hi,
    Have you checked if the PDF Preview Handler is available and shows as enabled in File > Options > Trust Center > Trust Center Settings > Attachment Handling > Attachment and Document Previewers?
    Which format of file are you previewing in Outlook? Please first make sure the format is supported by Adobe reader. You can verify this by consulting the Adobe Reader support. If the file type is supported by Adobe Reader, please open Control Panel,
    find and click Default Programs >
    Associate a file type or protocol with a program, then locate the file format and make sure
    Adobe Reader is set as the default program for the file type.
    If it's not a PDF document that you want to preview, we can also try to preview a PDF attachment to see if it works fine. If this issue continues when previewing a PDF attachment in Outlook, I'd recommend we uninstall and then reinstall the Adobe reader
    to see the result.
    Please let me know the result.
    Regards,
    Steve Fan
    TechNet Community Support
    It's recommended to download and install
    Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
    programs.

  • PDF preview not working in ITS after patch31 - HTTP 404 file not found

    Hi Friends,
    We installed Patch 31 on ITS 620.
    Previousl patch level was 17.
    The functionality to show pdf preview using FM 'SSFCOMP_PDF_PREVIEW' is not working.(Which is working fine when viewed from SAP GUI)
    We are getting 'HTTP 404 - File Not Found' error.
    What could be the reason?
    Any help on this is highly appreciated.
    Thanks,
    Simha
    Edited by: Simha on Oct 30, 2008 3:03 AM

    problem not resolved and we reverted back to older patch.
    Closing this thread

  • PDF Preview not working in Workspace

    Greetings
    Attempts to execute the PDF Preview command in Workspace result in 'PDF has not been configured for this web server.'
    The Hyperion S9 BI+ 9.3 Financial Reporting Print Server service was configured to use AFPL Ghostscript 8.51 and was started prior to attempting the command.
    Ghostscript itself is installed and tested working.
    Checked Workspace's MIME types library and found '.pdf' already mapped to 'application/pdf'.
    Read the installation and configuration guides and found no clues as to what may be preventing the print server from generating the PDF preview.
    Went through the log files under folder %HYPERION_HOME%\BIPlus\logs, %HYPERION_HOME%\logs\BIPlus, and MS IIS's, but found nothing.
    Any ideas on diagnosing and troubleshooting this issue?
    Thanks!

    I believe the supported version for ghost script is 7.0.6; I had the same problem and after installing the lower version it worked like a charm.
    If you cant find the older version let me know, I'll email it to you or place it in my website.

  • Indesign transparency multiply pdf/x-1a pdf/x-4 export pdf object not visible

    Hello,
    I've created a simple Indesign cs4 document under osx demonstrating the problem. I've copied from an Indesign document a rectangle with a fill color 100% cyan and a transparency effect multiply and paste the object within a new created document. I've paste the same rectangle again and switched off the transparency effect. Then I've create a new rectangle again with the same fill color and multiply transparency effect.
    When I create a pdf with the standard pdf/x-4 settings the copied rectangle with the multiply transparency effect has disappeared, while the other 2 rectangles are visible. Creating a pdf with the standard pdf/x-1 settings in Indesign, then all 3 rectangles are visible.
    I've created a zip file named Indesign.zip with the following 3 elements:
    - multiply.indd - indesign document
    - pdfx1.pdf - export pdf with pdf/x1 settings (3 rectangles are visible)
    - pdfx4.pdf - export pdf with pdf/x4 settings (only 2 rectangles are visible)
    Opening the document with CS5 and creating pdf files, we obtain the same strange result.
    You can download the zip file from the following link:
    http://www.symeta.be/symeta/static/files/Indesign.zip
    How do we explain this peculiar problem?
    Regards,

    Peter, John,
    If there is no solution finding corrupt objects before going to production (creating pdf files), then the problem is only detected when the job is printed! More important, if the corrupt object is located in an advertisement, then you customer wouldn't pay.
    To further investigate the problem I've create 2 snippets with the following names:
    - Snippet_Good_PDFx4_Result.idms (snippet of the object who's visible after conversion to pdf/x-4)
    - Snippet_Wrong_PDFx4_Result.idms (snippet of the object who's not visible after conversion to pdf/x-4)
    You can download these snippets from the following link.
    http://www.symeta.be/symeta/static/files/Snippets.zip
    When I replace the following 4 lines from the bad snippet:
                                <PathPointType Anchor="0.21122640285165062 35298.673065771356" LeftDirection="0.21122640285165062 35298.673065771356" RightDirection="0.21122640285165062 35298.673065771356"/>
                                <PathPointType Anchor="0.21122640285165062 35440.40534923592" LeftDirection="0.21122640285165062 35440.40534923592" RightDirection="0.21122640285165062 35440.40534923592"/>
                                <PathPointType Anchor="141.94350986741858 35440.40534923592" LeftDirection="141.94350986741858 35440.40534923592" RightDirection="141.94350986741858 35440.40534923592"/>
                                <PathPointType Anchor="141.94350986741858 35298.673065771356" LeftDirection="141.94350986741858 35298.673065771356" RightDirection="141.94350986741858 35298.673065771356"/>
    With the following 4 lines from the good snippet:
                                <PathPointType Anchor="154.96062992125985 161.1023622054882" LeftDirection="154.96062992125985 161.1023622054882" RightDirection="154.96062992125985 161.1023622054882"/>
                                <PathPointType Anchor="154.96062992125985 302.8346456700551" LeftDirection="154.96062992125985 302.8346456700551" RightDirection="154.96062992125985 302.8346456700551"/>
                                <PathPointType Anchor="296.6929133858268 302.8346456700551" LeftDirection="296.6929133858268 302.8346456700551" RightDirection="296.6929133858268 302.8346456700551"/>
                                <PathPointType Anchor="296.6929133858268 161.1023622054882" LeftDirection="296.6929133858268 161.1023622054882" RightDirection="296.6929133858268 161.1023622054882"/>
    Then the result is ok!
    The bad one has very strange coordinate values, such as 35298.673065771356 which is about 12452 mm! When placing the bad snippet in a new Indesign document the result is ok, just after converting to pdfx/4 the object isn't visible anymore!
    Who can justify this strange behaviour?
    Regards?

  • Why don't PDF attachments not visible in mail.

    Mail is not displaying PDF's that are attached in the body of the email.  We have been dragging and dropping pdf and jpeg images into emails for years. The images are visible
    in the anders email but not to the receiver.  What changed?  Why are they not visible. We shouldn't have to down load or use quick view to see them.  The image files are under 1 mb.

    Hi,
    Similar problem here with me.
    Also this thread - http://discussions.apple.com/thread.jspa?threadID=1997630
    Hopefully we can find a solution.
    I've rebuilt mailboxes and re-added accounts to no avail.
    Attachments are working fine in the web interface but when syched with IMAP to Mail - no worky.
    I get a winmail.dat file instead.
    Cheers

  • LiveCycle Version 8-PDF Preview not available

    I am designing forms in LiveCycle version 8.0. The PDF Preview is not available. The help file says it's because I don't have Acrobat installed. I have Acrobat Professional version 8 installed. How do I get the PDF preview?

    This just started happening for me today. Yesterday Designer 8 was fine. PDF preview was available. Today, suddenly, it's grayed out in the menu and the PDF Preview tab is missing from the main window... POOF! Gone!
    I have already done a repair of Acrobat 8... how do I get the PDF PReview back? This is absurd!

  • PDF layers not visible & won't print

    I have a PDF that was sent to me that is comprised of 2 layers.  When I open the PDF in 9.0 Pro, both layers flash on the screen momentarily and then Layer1 disappears and only Layer2 is visible.  If I turn off visibility of Layer2, Layer1 appears.  If I turn on visibility of Layer2, Layer1 disappers.
    Then, when I try to print, only Layer2 will print.  I have to configure Layer2 to "never print" in order to get Layer1 to print.  I have tried to "merge" layers, but that doesn't seem to work.  I have tried to "flatten" layers, but Acrobat just seems to freeze.
    Only when I click on Advanced > Print Production > Output Preview and have the "Simulate Overprinting" checked does the PDF appear as it should.  However, it won't print that way.  Any ideas on how to get BOTH layers visible at the same time AND able to print?

    After posting I kept researching and found the following:
    If a PDF has been created with overprinting you must do two things to get the PDF to display properly and print.
    Enable Overprint Preview: Edit > Preferences > Page Display - Change "Use Overprint Preview" to "Always".  This will force the PDF to show everything.  You can turn the feature back off later if you wish.
    Enable Overprint Printing: File > Print - Click on Advanced button - Click on "Output" - Place a check in the box "Simulate Overprinting".  The PDF should print as it displays on the screen.

  • Windows 8.1 RT PDF previewer not installed.

    I'm trying to use Windows 8.1 Outlook 2013 RT and I can't preview PDF files within outlook. I have Adobe Reader touch installed. On my desktop, I just install Adobe Reader and restart.
    How do I make this work on RT.
    Thanks

    Hi,
    Windows Store apps(including Adobe Reader Touch) don't offer the preview capability in the desktop environment.
    We confirm you need to install Adobe Reader XI from Adobe Reader offical website to ensure that Outlook 2013 could preview PDF file.
    However, we could not confirm whether Adobe provide the Adobe Reader program for Outlook RT. We'd suggest that you consult Adobe Support for help.
    Best regards,
    Karen Hu

  • PDF Preview NOT available!  HELP!

    In LiveCyle 8.0, I cannot preview my form as a pdf. There's no tab next to Design View, the preview option is greyed out on the View menu, and F5 does not work. Why??

    >I am having same problems - I have even reinstalled Adobe Professional 8 and Adobe Reader 8 - still grayed out under View...
    Maybe installing Reader is the problem. This isn't recommended.
    I have nothing to suggest except uninstalling both and reinstalling
    Acrobat only, but I cannot offer any particular hope it will work.
    Aandi Inston

  • PDF WATERMARK NOT VISIBLE IN READER

    HI Gurus,
    I have created a simple script which reads a value from a form field and creates a watermark on pdf document.
    I can view the watermark in Acrobat Pro 9 but unable to see the watermark when viewing through acroabt reader 9. Below is the script I am using. I have not set bOnScreen or bOnPrint and have left as default which I believe is true.
    var cMyText = this.getField("WATERMARKADDRESS").value;
    this.addWatermarkFromText({ 
    cText: cMyText, 
    nTextAlign: app.constants.align.center,
    nRotation: 45
    Any help provided would be greatly appreciated.
    Thank Lee

    What does it say in the JavaScript console? Have you checked the documentation for addWaterMarkFromText (especially the quick bar) to see if it is supposed to work in Reader?

  • Creative Cloud PDF preview not working correctly

    More than 50% of the time, when we upload a PDF to our Creative Cloud the preview image is distorted to a square regardless of the actual proportions. The left and right arrows are also missing so you cannot preview multiple pages in a file. Sometimes it works but most the time it doesn't. Usually we have to upload again and then everything is fine.
    Even though the upload doesn't preview correctly or allow you to preview multiple pages the PDF download is fine.

    I am having the same problem, it's been like that for weeks. I've tried uploading an inDesign file and it only shows the first page, squeezed with funky font issues. I've tried different browsers with no luck.

Maybe you are looking for

  • "http request error" - SQL call sometimes works, sometimes doesn't

    Hello everyone, A bit of a random question, maybe someone has an idea... I have a flex app that queries data from a mySQL service via http service. Overall, things work great! The queries are quick to return a result and without issues. But, when I v

  • Installation tools...suggestions? Pros/Cons?

    I am creating a suite of applications for a client and will need to package this for distribution across the web as well as on hard media (CD). Can anyone give me some ideas as to what utilities are out there for building installable packages that ca

  • Information of Cost Center

    hi, where is the information of Cost Center when we create a new Employee through PA30 in HR. regards,

  • Running Excel VBA code developed in Office 2010 under office 2013

    I have developed a large application successfully under Excel 2010 and I have a 30 day trial of office 2013. My applications will not run. However if I take a piece of code from the application and open a new spreadsheet under 2013 and place it in a

  • Trying to mark a grub GPT partition with parted give me error

    i try to mark mygrub partition to boot my system and when i reach the line in grub archwiki parted /dev/disk set X bios_grub on i get an error : Parted: Invalid token: bios_grub Last edited by Ferdinand866 (2013-05-27 22:43:35)