Hard coded member names vs. member set function
Hello,I'm having a difficult time troubleshooting the following dynamic calc. This formula works perfectly - it gives me the total units sold in the prior 13 weeks:@SUMRANGE("POS Units", @CURRMBRRANGE(Time, LEV, 0, -13, -1))However I'd like to make the member more generic, so instead of "POS Units" I thought I could simply substitute @CURRMBR(Measures), as in:@SUMRANGE(@CURRMBR(Measures), @CURRMBRRANGE(Time, LEV, 0, -13, -1))But when I check the syntax in the outline formula editor, it tells me "Invalid Parameter Type".I have the same problem with the 0 as a parameter of @CURRMBRRANGE. I tried substituting the function @CURLEV(Time) and got the same error.-dan
Well, there are a couple of things. First, if the total member (to store the 13 time periods total) is in the Accounts dimension, then you cannot have it store sums for all possible measures.The SUMRANGE function wants a member to sum - aside from the syntax problem - when SUMRANGE is calculating the Total Units Sold, what do you think THe CURRMBR is from Measures? Its the Total Units Sold! You would be calculating the sum of Total Units Sold over time and putting the result into Total Units Sold. The reason for this is that two members from the same dimension do not intersect each other.Now, if you put a member in a different dimension, and you want to sum any possible measure, use the @SUM command rather than @SUMRANGE. It will implicitly choose the current member from the other dimensions as it calculates.Finally, despite what the documentation says, some functions don't work when used in combination. Also, some function give syntax validation errors, but do work when the calc is run. THere is a "Server Formula Validate" option in the outline editor that sometimes properly evaluates formulas.Hope that helps.Regards,Jade-------------------------------Jade ColeSenior Business Intelligence ConsultantClarity [email protected]
Similar Messages
-
Parse schema name - Avoiding hard-coded schema names
Hi all,
I have been trying to find a similar thread but had no luck. I want to avoid hard-coding schema names in my reports. I have tried to use a Substitution string but I don't seem to be able to reference it by just doing :default_schema. I already reference the parsing schema like this: #OWNER# which is saving me a lot of time. Is there any way to create additional variables like that one instead of those substitution strings that can't be parsed in a query?
Thanks a lot for your help.
Regards,
werot.Werot wrote:
I have been trying to find a similar thread but had no luck. I want to avoid hard-coding schema names in my reports. I have tried to use a Substitution string but I don't seem to be able to reference it by just doing :default_schema. I already reference the parsing schema like this: #OWNER# which is saving me a lot of time. Is there any way to create additional variables like that one instead of those substitution strings that can't be parsed in a query?
Will you actually get any benefit from using substitution strings? They are also hard-coded at design time. You could use application items if you need something dynamic.
Bind variable syntax (:default_schema) will not work for lexical substitution of substitution string and application item values in report queries. You have to use static text (&DEFAULT_SCHEMA.) references (and be aware of the potential for SQL injection that this exposes).
I wouldn't recommend using schema qualifiers directly in APEX applications. I would use grants, synonyms and views at the database level. -
Hi All,
I am trying to load shape file into a sql spatial table. A execution process task is used to run the ogr2ogr.exe program.
This is how the process tab looks like .
Executable : C:\gdal_ogr2ogr\bin\gdal\apps\ogr2ogr.exe
Argument : -f MSSQLSpatial MSSQL:server=SQL-ABC-DEV;database=MYSIMPLE_Dev;Trusted_Connection=True;\\mypath\files\shares\Data\www.mypage.htm\my_sample_file.shp
Success value : 1
For above settings, package runs fine. The spatial table is created in SQL server db. However when hard-coded SQL server name and database name are replaced with global variables , the spatial table is not created in the database. Yet the package runs fine.
It does not throw any errors. (I am using another variable for full file path. It is not causing any errors though)
" -f MSSQLSpatial MSSQL:server="+@[$Project::SQLServerName]+";database="+ @[$Project::DatabaseName] +";Trusted_Connection=True;"+ @[User::Filepath] + "\\my_sample_file.shp"
Both variables are string type. Can anyone tell me what I am doing wrong here please?
I am running this in VS 2012.
Thanks for your help in advance..
shamenThere should be a single space just after True:
before
" -f MSSQLSpatial MSSQL:server="+@[$Project::SQLServerName]+";database="+ @[$Project::DatabaseName] +";Trusted_Connection=True;"+ @[User::Filepath] + "\\my_sample_file.shp"
after keeping the space
" -f MSSQLSpatial MSSQL:server="+@[$Project::SQLServerName]+";database="+ @[$Project::DatabaseName] +";Trusted_Connection=True; "+ @[User::Filepath] + "\\my_sample_file.shp"
Thanks
shamen -
Hard-coded application name in Customized App.
Dear all,
The name of standard application has been hard coded in one of the methods where URL for a page is generated. The customized application starts calling standard pages at this point.
I copied this method-code and called it from my object. But this is giving runtime context error.
I would have replaced the application name from this URL after method call, but its called at many points in application.
Kindly suggest what should i do now.
ThanksThe @computername@ variable takes a computer name defined by the user who deploys the template.
To make this template fit for scaling you have to define the computer name not as a variable but as a name followed by a number of ### symbols. The ### symbols will become numerical values. VMM makes sure that the numbers are incremented each time you scale
your computer tier.
Serv## will resolve in Serv01, Serv02, etc.
I’ve tried to combine the variable with the ### symbols in the past. I recall this didn’t work back then (2012SP1).
HTH -
Can we change the display order of member set functions like @Idescendant?
Generally, for example, if we have dimension with member hierarchy as below:
Parent
Child1
Child11
Child2
Child21
then, when we use function @Idescendant(Parent) to define the row during form design, the form will display the members in the following order:
Child11
Child1
Child21
Child2
Parent
This is not what I want, I need the order to be the same as I defined them.
I know I can set the members one by one to display any order as I wish, but this is not doable when I have hundreds of members.
is there any good way to solve this problem? Any answer is appreciated.
thanks
tonyHi,
The answer is unfortunately no, there isn't any easy way of doing it. There are ways of doing it and automating it but I can't say it is easy. The solution I found once required me to update form definition tables through a stored procedure in Planning and recycle services after every update.
Cheers,
Alp -
How to retrieve a member set by a certain value?
Hi everyone,
I'm having a problem trying to retrieve a set of entity members that have a certian value in an account.
For a UDA or an attribute there are functions that solve this very problem but I can't figure out how to check on a value.
For example if I'm trying to allocate a value to entities that contain a '1' in account 'Flag' I cannot find a member set function that would work.
"Plan"=@allocate("Revenue"->"Plan",@ismbr("Flag"==1)),&PriorYear->"ACT",,share)
This code doesn't work because the @ismbr function expects a member and not a boolean.
Alternatively would it be possible to save a member selection so that I can loop through all entites and add them to a selection one by one?
Thanks for your help :)Planning, eh? :)
I think if you took your calc and stood it on it's head, you might get the calc range you want.
Here's my (theoretical) idea.
You're already (I assume) creating a calc block in a calc script/HBR to do the Plan calculation in the first place.
I wonder if this would work:
FIX(level 0 dimension members of whatever dimension)
"Plan"
IF("Flag" == 1)
"Plan" = @ALLOCATE("Revenue"->"Plan", @HIERARCHICALFUNCTION("whatever"), "Revenue"->"ACT"->&PriorYear, , share) ;
ENDIF
ENDFIX
The goal is to have the IF statement trump the range in the @ALLOCATE. I'm not sure it would work but it might be worth a try.
Your @ALLOCATE is really just child member / parent member * basis. You could just roll your own:
FIX(level 0 dimension members of whatever dimension)
"Plan"
IF(@ISMBR("Flag" == 1))
"Plan" = ("Revenue"->"ACT"->&PriorYear / @PARENTVAL(whatever dimension, "Revenue"->"ACT"->&PriorYear)) * "Revenue"->"Plan" ;
ENDIF
ENDFIX
Regards,
Cameron Lackpour -
How to get the table name in the trigger definition without hard coding.
CREATE TRIGGER db.mytablename
AFTER UPDATE,INSERT
AS
INSERT INTO table1(col1)
SELECT InsRec.col1
FROM
INSERTED Ins
--Below i am calling one sp for which i have to pass the table name
EXEC myspname 'tablename'
In the above trigger,presently i am hard coding the tablename
but is it possible to get the table name dynamically on which the trigger is defined in order to avoid hard coding the table nameI really liked your audit table concept. You inspired me to modify it so that, the entire recordset gets captured and added a couple of other fields. Wanted to share my end result.
USE [YourDB]
GO
/****** Object: Trigger [dbo].[iudt_AutoAuditChanges] Script Date: 10/18/2013 12:49:55 ******/
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
ALTER TRIGGER [dbo].[iudt_AutoAuditChanges]
ON [dbo].[YourTable]
AFTER INSERT,DELETE,UPDATE
AS
BEGIN
SET NOCOUNT ON;
Declare @v_AuditID bigint
IF OBJECT_ID('dbo.AutoAudit','U') IS NULL BEGIN
CREATE TABLE [dbo].[AutoAudit]
( [AuditID] bigint identity,
[AuditDate] DateTime,
[AuditUserName] varchar(128),
[TableName] varchar(128) NULL,
[OldContent] XML NULL,
[NewContent] XML NULL
ALTER TABLE dbo.AutoAudit ADD CONSTRAINT
PK_AutoAudit PRIMARY KEY CLUSTERED
[AuditID]
) WITH( STATISTICS_NORECOMPUTE = OFF, IGNORE_DUP_KEY = OFF, ALLOW_ROW_LOCKS = ON, ALLOW_PAGE_LOCKS = ON) ON [PRIMARY]
CREATE NONCLUSTERED INDEX [idx_AutoAudit_TableName_AuditDate] ON [dbo].[AutoAudit]
( [TableName] ASC,
[AuditDate] ASC
)WITH (STATISTICS_NORECOMPUTE = OFF, SORT_IN_TEMPDB = OFF, IGNORE_DUP_KEY = OFF, DROP_EXISTING = OFF, ONLINE = OFF, ALLOW_ROW_LOCKS = ON, ALLOW_PAGE_LOCKS = ON) ON [PRIMARY]
END
Select * Into #AuditDeleted from deleted
Select * Into #AuditInserted from inserted
While (Select COUNT(*) from #AuditDeleted) > 0 OR (Select COUNT(*) from #AuditInserted) > 0
Begin
INSERT INTO [dbo].[AutoAudit]
( [AuditDate], [AuditUserName], [TableName], [OldContent], [NewContent])
SELECT
GETDATE(),
SUSER_NAME(),
[TableName]=object_name([parent_obj]),
[OldContent]=CAST((SELECT TOP 1 * FROM #AuditDeleted D FOR XML RAW) AS XML),
[NewContent]=CAST((SELECT TOP 1 * FROM #AuditInserted I FOR XML RAW) AS XML)
FROM sysobjects
WHERE
[xtype] = 'tr'
and [name] = OBJECT_NAME(@@PROCID)
Set @v_AuditID = SCOPE_IDENTITY()
Delete from AutoAudit
Where AuditID = @v_AuditID
AND Convert(varchar(max),oldContent) = Convert(varchar(max),NewContent)
Delete top(1) from #AuditDeleted
Delete top(1) from #AuditInserted
End
END -
Attempt to cross a null member in function @X
Hi,
I am getting this error "Attempt to cross a null member in function @X" in the below code. How do i resolve this?
IF(Grade_All->@MEMBER(@CONCATENATE(Assumptions_,@NAME(@PARENT(@CURRMBR(Location)))))->"Seat Requirement Flag"==1)
"Production Seat"=((@sumrange("Manpower Required",@List("Agents_L1_Freshers","Agents_L1_Tenured","Agents_L2_L2.5_Billable","SME_Agents_L2_NonBillable"))) / (Grade_All->@MEMBER(@CONCATENATE(Assumptions_,@NAME(@PARENT(@CURRMBR(Location)))))->"Seat Utilization Ratio (Production)"));
ENDIF;)I used a run time prompt in my FIX statement. Now i am not getting this error.
FIX([Location])
"Production Seat"(
IF(Grade_All->@MEMBER(@CONCATENATE(Assumptions_,@NAME(@PARENT(@CURRMBR(Location)))))->"Seat Requirement Flag"==1)
"Production Seat"=((@sumrange("Manpower Required",@List("Agents_L1_Freshers","Agents_L1_Tenured","Agents_L2_L2.5_Billable","SME_Agents_L2_NonBillable"))) / (Grade_All->@MEMBER(@CONCATENATE(Assumptions_,@NAME(@PARENT(@CURRMBR(Location)))))->"Seat Utilization Ratio (Production)"));
ENDIF;)
ENDFIX
Thanks for ur help. -
A family member set up my time capsule and sayy it's workign correcly but the light on it isn't green, it is yellow...what does this mean?
If the Time Capsule is operating normally, the light will be green.
If the amber light is blinking, something is not adjusted correctly, or there may be an update available for the Time Capsule.
Do you have the device that was used to set up and configure the Time Capsule there? Is this a Mac? If yes, we need to know what operating sysem it is using.
If you are not sure, click the Apple icon in the upper left corner of the screen and then click About This Mac. Post back with the OS X Version number that you see there. -
Error in setting final variable using properties vs hard coding
I am getting the following error when trying to use this line of code
public static final String MESSAGES_BUNDLE_NAME = System.getProperty("messages");
java.lang.ExceptionInInitializerError: java.lang.NullPointerException
When I change the above line to
public static final String MESSAGES_BUNDLE_NAME = "messages_usa";
the program works fine.
Any ideas as to why this is happening would be greatly appreciated.
Thanks,
BorisI am sorry, but I realized now that I did notdiscribe
the problem fully.
The error is happening on the following line
return APPLICATION_RESOURCE_BUNDLE.getString(key);
So it looks like APPLICATION_RESOURCE_BUNDLE is
becoming null.
No that is not what is happening.
This is the error that you posted.....
java.lang.ExceptionInInitializerError:
java.lang.NullPointerException
The first part is the exception, not the second part
(although the second causes the first.)
The java docs specifically point out that a
NullPointerException is returned if the base name is
null - the parameter to getBundle().
The initialization exception occurs because when it
tries to excecute the initialization expression for
the final, then the getBundle() is throwing the null
pointer exception.
It is is not clear what you code is actually supposed
to be doing but I think you suggested that your are
using a system property. If so then it means that
that system property is not defined. And it works
when you use a hard coded value because the hard coded
value is defined.From this explanation I don't understand why initializing the bundle name from System.getProperty() works in the same class with the bundle obejct initialization, but does not work when it is in another class from bundle object initialization. -
Passing hard-coded string parameters into a FUNCTION
I created a Function that accepts two INT and two VARCHAR2 parameters. I want to access it in a SELECT statement and manually pass in parameters to it.
For example,
SELECT FN_MYFUNC(10, 20, 'string1', 'string2') FROM DUAL;
However, when I do this the hard-coded strings don't seem to be recognized by the Function. But, if I were to pass in a Fieldname from a TABLE then the above function works. Is there something extra I need to do to pass in hard-coded strings into a function?I have pasted the function where this problem is occuring below. If I use it in a SELECT, for example....
SELECT fn_GetRegValueFromRegData(3, 3, 'REG', '119') FROM DUAL;
.....it returns blank everytime when it should return a numeric value. However, this only occurs if I hard-code the parameter values (like above). However, if I pass in fieldnames from a TABLE, for example.....
SELECT fn_GetRegValueFromRegData(RegLink, EeLink, ChqType, RegCode) FROM RegData;
......then I get data back! Any idea why data is returned when I pass in fieldnames but not when I pass in hard-coded parameter values?
=================================================
CREATE OR REPLACE FUNCTION fn_GetRegValueFromRegData
(p_RegLink INT,
p_EELink INT,
p_ChequeType VARCHAR2,
p_RegCode1 VARCHAR2,
p_RegCode2 VARCHAR2 := '-1')
RETURN NUMBER
AS
v_regvalue NUMBER(14,5);
BEGIN
BEGIN
--retrieve data using the REGCODE1 value
SELECT a.regvalue INTO v_regvalue
FROM regdata a
WHERE a.RegCode = p_RegCode1
AND a.RegLink = p_RegLink
AND a.eeLink = p_EELink
AND a.ChqType = p_ChequeType
AND a.EndDate IS NULL;
EXCEPTION
WHEN OTHERS
THEN
--retrieve data using the REGCODE2 value
SELECT a.regvalue INTO v_regvalue
FROM regdata a
WHERE a.RegCode = p_RegCode2
AND a.RegLink = p_RegLink
AND a.eeLink = p_EELink
AND a.ChqType = p_ChequeType
AND a.EndDate IS NULL;
END;
RETURN v_regvalue;
END;
/ -
In TOTALYTD function is it possible to avoid hard-coding year_end_date?
Suppose you have a fiscal year of 9/30. The TOTALYTD function looks like:
YTD Actual $:=TOTALYTD( [Actual $], 'Date'[Date], ALL('Date'), "9/30")
But I want to avoid hard coding "9/30", and assuming I have a settings table from where I can get a date with the yearend, I tried this:
YTD Actual $:=TOTALYTD ([Actual $], 'Date'[Date], ALL('Date'), DISTINCT( 'Settings'[YearEndDate]))
I get no errors but it calculates like "12/31". I tried to use Format but with no luck.
Is there a way to make this work?I didn't try it, but I guess a max should work (assuming that there is only one date in the settings table).
YTD Actual $:=TOTALYTD ([Actual $], 'Date'[Date], ALL('Date'), MAX( 'Settings'[YearEndDate])
Can you try it out?
Cheers,
Jason | www.SqlJason.com
P.S. : Please click the 'Mark as Answer' button if a post solves your problem! :) -
Is is possible to avoid hard-coding the Item in a shared Select List Query?
I created a "Select List" in the Shared Components area as follows:
My goal is to create a shared select list that can be used on any form for a particular Field.
IF :P10_FK_RSTA_CODE is NULL THEN
RETURN
'select col_description, col_code_pk
from CODE_TABLE
where col_active_ind = ''Y''';
ELSE
RETURN
'select col_description, col_code_pk
from CODE_TABLE
where col_code_pk = :P10_FK_RSTA_CODE';
END IF
Which works great, but how can I make the select list work for the same column on a different form?
Because :P10_FK_RSTA_CODE is hard-coded in the function, I can't reuse this Function from a different form.
(I could rename the Field on every form to the same name, but I'm hoping there is a better way.)
Is there a way I can pass in a variable from the Field Item to make this dynamic where I can use it on any form?
Also, I am very new at this, so if there is a better way to do this, I would greatly appreciate any input.
Thanks in advance.
MF>
Welcome to the forum: please read the FAQ and forum sticky threads (if you haven't done so already), and update your profile with a real handle instead of "956902".
When you have a problem you'll get a faster, more effective response by including as much relevant information as possible upfront. This should include:
<li>Full APEX version
<li>Full DB/version/edition/host OS
<li>Web server architecture (EPG, OHS or APEX listener/host OS)
<li>Browser(s) and version(s) used
<li>Theme
<li>Template(s)
<li>Region/item type(s) (making particular distinction as to whether a "report" is a standard report, an interactive report, or in fact an "updateable report" (i.e. a tabular form)
With APEX we're also fortunate to have a great resource in apex.oracle.com where we can reproduce and share problems. Reproducing things there is the best way to troubleshoot most issues, especially those relating to layout and visual formatting. If you expect a detailed answer then it's appropriate for you to take on a significant part of the effort by getting as far as possible with an example of the problem on apex.oracle.com before asking for assistance with specific issues, which we can then see at first hand.
I created a "Select List" in the Shared Components area as follows:
My goal is to create a shared select list that can be used on any form for a particular Field.
IF :P10_FK_RSTA_CODE is NULL THEN
RETURN
'select col_description, col_code_pk
from CODE_TABLE
where col_active_ind = ''Y''';
ELSE
RETURN
'select col_description, col_code_pk
from CODE_TABLE
where col_code_pk = :P10_FK_RSTA_CODE';
END IF
Which works great, but how can I make the select list work for the same column on a different form?
Because :P10_FK_RSTA_CODE is hard-coded in the function, I can't reuse this Function from a different form.
(I could rename the Field on every form to the same name, but I'm hoping there is a better way.)
Is there a way I can pass in a variable from the Field Item to make this dynamic where I can use it on any form?Reference the value of an application item rather than a page item in the LOV query, setting the value using a process or computation on each form page. -
Output type for the managed codes cut letter is hard coded
Hello,
Very Good afternoon!
I have a requirement to create new Output Types for a Smart Form.
The already existing Output types are hard coded as shown Below :
CONSTANTS : c_kschl_order LIKE nast-kschl
VALUE 'ZUS0',
c_kschl_order1 LIKE nast-kschl
VALUE 'ZUS1',
Now they do not want to use ZUS1. Insted they wnat to use New Output Types.
u2022 Remove ZUS1 as we no longer use this one.
u2022 Add ZAU0
u2022 Add ZNZ0
u2022 Add ZJP0
u2022 Add ZCN0
u2022 Add ZKR0
How to add these Output types without Hardcoding as shown ABove.
Any Suggestions will be appreciated.....
For reference..I will paste the code of the Program here.
Here is the code :
PROGRAM DECLARATION
PROGRAM ID Z_RVADOR01_SALES_CUT_LETTER
TABLES: vbak, "Sales Document: Header Data
vbap, "Sales Document: Item Data
vbpa, "Sales Document: Partner
vbep, "Sales Document: Schedule Line Data
kna1, "General Data in Customer Master
MARA, "Material Master
KOMK, "Communicationarea for conditions
KOMP, "Communicationarea for conditions
KOMVD, "Communicationarea for conditions
VBCO3, "Communicationarea for view
VBDKA, "Headerview
VBDPA, "Itemview
VBDPAU, "Subitemnumbers
CONF_OUT, "Configuration data
SADR, "Addresses
TVAG, "Reason for rejection
VEDKA, "Servicecontract head data
VEDPA, "Servicecontract position data
VEDKN, "Servicecontract head notice data
VEDPN, "Servicecontract pos. notice data
RISERLS, "Serialnumbers
KOMSER, "Serialnumbers for print
TVBUR, "Sales office
TVKO, "Sales organisation
ADRS, "Communicationarea for Address
FPLTDR, "billing schedules
WTAD_ADDIS_IN_SO_PRINT, "additional
WTAD_BUYING_PRINT_EXTRA_TEXT, "texts belonging to additional
adrc,
adr6,
t247.
INCLUDE RVADTABL.
INCLUDE RVDIREKT.
INCLUDE VEDADATA.
data for access to central address maintenance
INCLUDE SDZAVDAT.
TYPE-POOLS: ADDI.
DATA PRICE_PRINT_MODE(1) TYPE C. "Print-mode
DATA: RETCODE LIKE SY-SUBRC. "Returncode
DATA: REPEAT(1) TYPE C.
DATA: XSCREEN(1) TYPE C. "Output on printer or screen
DATA: BEGIN OF STEU, "Controldata for output
VDKEX(1) TYPE C,
VDPEX(1) TYPE C,
KBKEX(1) TYPE C,
KBPEX(1) TYPE C,
END OF STEU.
DATA: BEGIN OF TVBDPA OCCURS 0. "Internal table for items
INCLUDE STRUCTURE VBDPA.
DATA: END OF TVBDPA.
DATA: BEGIN OF TKOMV OCCURS 50.
INCLUDE STRUCTURE KOMV.
DATA: END OF TKOMV.
DATA: BEGIN OF TKOMVD OCCURS 50.
INCLUDE STRUCTURE KOMVD.
DATA: END OF TKOMVD.
DATA: BEGIN OF TVBDPAU OCCURS 5.
INCLUDE STRUCTURE VBDPAU.
DATA: END OF TVBDPAU.
DATA: BEGIN OF TKOMCON OCCURS 50.
INCLUDE STRUCTURE CONF_OUT.
DATA: END OF TKOMCON.
DATA: BEGIN OF TKOMSERVH OCCURS 1.
INCLUDE STRUCTURE VEDKA.
DATA: END OF TKOMSERVH.
DATA: BEGIN OF TKOMSERVP OCCURS 5.
INCLUDE STRUCTURE VEDPA.
DATA: END OF TKOMSERVP.
DATA: BEGIN OF TKOMSERVHN OCCURS 5.
INCLUDE STRUCTURE VEDKN.
DATA: END OF TKOMSERVHN.
DATA: BEGIN OF TKOMSERVPN OCCURS 5.
INCLUDE STRUCTURE VEDPN.
DATA: END OF TKOMSERVPN.
DATA: BEGIN OF TKOMSER OCCURS 5.
INCLUDE STRUCTURE RISERLS.
DATA: END OF TKOMSER.
DATA: BEGIN OF TKOMSER_PRINT OCCURS 5.
INCLUDE STRUCTURE KOMSER.
DATA: END OF TKOMSER_PRINT.
DATA: BEGIN OF TFPLTDR OCCURS 5.
INCLUDE STRUCTURE FPLTDR.
DATA: END OF TFPLTDR.
DATA: TADDI_PRINT TYPE ADDI_SO_PRINT_ITAB WITH HEADER LINE.
TYPES:BEGIN OF ty_orders ,
xblnr LIKE mkpf-xblnr, "delivery number
erfmg LIKE mseg-erfmg, "goods issue quantity
custname LIKE kna1-name1, "customer name
bstnk LIKE vbak-bstnk, "purchase order number
ean11 LIKE vbap-ean11, "upc
kdmat LIKE vbap-kdmat, "customer material code
arktx LIKE vbap-arktx, "description
csrno LIKE kna1-kunnr, "customer service rep number
spras LIKE kna1-spras, "customer language key
csrname LIKE kna1-name1, "customer service rep name
csremail LIKE adr6-smtp_addr, "csr email
csrphone LIKE kna1-telf1, "csr telephone
csrext LIKE adrc-tel_extens, "csr extension
csrfax LIKE kna1-telfx, "csr fax
total LIKE lips-lfimg, "cut quantity
ldate(18) TYPE c,
END OF ty_orders.
CONSTANTS: c_kschl_order LIKE nast-kschl
VALUE 'ZUS0',
c_kschl_order1 LIKE nast-kschl
VALUE 'ZUS1', c_parvw_shipto LIKE vbpa-parvw
VALUE 'WE',
c_parvw_csr LIKE vbpa-parvw
VALUE 'ZS',
c_eng(1) TYPE c VALUE 'E',
c_sep(1) TYPE c VALUE '/',
c_sale(25) type c VALUE 'Sales Order'.
DATA: WA_VBAK TYPE VBAK,
tbl_ord TYPE ty_orders OCCURS 0 WITH HEADER LINE,
w_csrname(30) TYPE c,
w_csrno(30) TYPE c,
w_email LIKE adr6-smtp_addr,
f_shipto_found TYPE c,
w_custname(30) TYPE c,
w_month(2),
w_ldate(18),
w_total LIKE lips-lfimg,
w_lines TYPE i VALUE 0,
f_mail(1) TYPE c,
cnt_1 TYPE i VALUE 0,
cnt_2 TYPE i VALUE 0,
tbl_otf LIKE itcoo OCCURS 0 WITH HEADER LINE,
w_type(25) TYPE c,
st_doc_data LIKE sodocchgi1,
tbl_objtxt LIKE solisti1 OCCURS 10 WITH HEADER LINE,
tbl_line LIKE tline OCCURS 0 WITH HEADER LINE,
tbl_attach LIKE solisti1 OCCURS 10 WITH HEADER LINE,
tbl_objhead LIKE solisti1 OCCURS 10 WITH HEADER LINE,
tbl_proc_para LIKE soparai1 OCCURS 10 WITH HEADER LINE,
tbl_maillist LIKE somlreci1 OCCURS 10 WITH HEADER LINE,
tbl_pack_list LIKE sopcklsti1 OCCURS 10 WITH HEADER LINE,
tbl_cpo LIKE itcpo OCCURS 0 WITH HEADER LINE,"SAPscript output
" interface
tbl_cpp LIKE itcpp OCCURS 0 WITH HEADER LINE,"SAPscript output
" parameters
tbl_smtp TYPE szadr_adsmtp_line OCCURS 0 WITH HEADER LINE,
tbl_cdhdpos LIKE cdshw OCCURS 0 WITH HEADER LINE,
tbl_cdpos LIKE cdshw OCCURS 0 WITH HEADER LINE,
wrk_lines LIKE sy-tabix,
hltlines TYPE i,
off1 TYPE p,
fle1(2) TYPE p,
fle2(2) TYPE p,
htabix LIKE sy-tabix,
hfeld(500) TYPE c.
FORM ENTRY USING RETURN_CODE US_SCREEN.
if sy-tcode = 'VA01'.
IF nast-kschl = c_kschl_order.
SELECT SINGLE * FROM VBAK INTO WA_VBAK WHERE vbeln = nast-objky.
IF SY-SUBRC = 0.
CLEAR RETCODE.
XSCREEN = US_SCREEN.
PERFORM PROCESSING USING us_screen.
IF RETCODE NE 0.
RETURN_CODE = 1.
ELSE.
RETURN_CODE = 0.
ENDIF.
ELSE.
retcode = sy-subrc.
syst-msgid = 'ZVERROR'.
syst-msgno = '000'.
syst-msgty = 'E'.
syst-msgv1 = NAST-KSCHL.
syst-msgv1 = 'Sales Order cut letter
for this order already issued'.
syst-msgv2 = ' '.
PERFORM protocol_update.
ENDIF.
ELSE.
CLEAR retcode.
xscreen = us_screen.
PERFORM processing USING us_screen.
IF retcode NE 0.
return_code = 1.
ELSE.
return_code = 0.
ENDIF.
ENDIF.
endif.
ENDFORM.
FORM PROCESSING *
FORM PROCESSING USING proc_screen.
CASE nast-kschl.
WHEN c_kschl_order.
PERFORM get_orders.
CHECK retcode = 0.
PERFORM openform USING proc_screen vbak-landtx.
CHECK retcode = 0.
PERFORM layout.
CHECK retcode = 0.
CHECK proc_screen NE 'X'.
w_type = c_sale.
PERFORM send_email USING proc_screen.
WHEN c_kschl_order1.
PERFORM get_orders.
CHECK retcode = 0.
CHECK proc_screen NE 'X'.
w_type = c_sale.
PERFORM send_email USING proc_screen.
WHEN OTHERS.
retcode = 1.
syst-msgid = 'E0'.
syst-msgno = '430'.
syst-msgty = 'E'.
PERFORM protocol_update.
ENDCASE.
IF retcode EQ 0.
syst-msgid = '69'.
syst-msgno = '254'.
syst-msgty = 'S'.
syst-msgv1 = nast-kschl.
PERFORM protocol_update.
ELSE.
syst-msgid = 'CKCC'.
syst-msgno = '036'.
syst-msgty = 'E'.
PERFORM protocol_update.
ENDIF.
ENDFORM.
FORM PROTOCOL_UPDATE *
The messages are collected for the processing protocol. *
FORM PROTOCOL_UPDATE.
IF xscreen EQ space.
CALL FUNCTION 'NAST_PROTOCOL_UPDATE'
EXPORTING
MSG_ARBGB = SYST-MSGID
MSG_NR = SYST-MSGNO
MSG_TY = SYST-MSGTY
MSG_V1 = SYST-MSGV1
MSG_V2 = SYST-MSGV2
MSG_V3 = SYST-MSGV3
MSG_V4 = SYST-MSGV4
EXCEPTIONS
OTHERS = 1.
ELSE.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
ENDFORM.
*& Form get_orders
text
--> p1 text
<-- p2 text
FORM get_orders.
DATA : f_csr_found TYPE c.
SELECT SINGLE vbeln vkorg vdatu bstnk kunnr
FROM vbak
INTO (vbak-vbeln,vbak-vkorg,vbak-vdatu,vbak-bstnk,vbak-kunnr)
WHERE vbeln EQ nast-objky.
IF sy-subrc NE 0.
retcode = sy-subrc.
syst-msgid = 'VN'.
syst-msgno = '203'.
syst-msgty = 'E'.
syst-msgv1 = 'VBAK'.
syst-msgv2 = sy-subrc.
PERFORM protocol_update.
ENDIF.
SELECT vbeln posnr matnr pmatn arktx abgru kdmat werks
FROM vbap
INTO (vbap-vbeln,vbap-posnr,vbap-matnr,vbap-pmatn,
vbap-arktx,vbap-abgru,vbap-kdmat,vbap-werks)
WHERE vbeln = vbak-vbeln
AND abgru NE space "select items havng Rejection Reason
and PSTYV NE 'ZHDR'.
to check whether the reason for rejection was picked from the
managed codes tables
data: war_abgru type abgru,
w_exist type c.
clear : war_abgru, w_exist.
select single abgru from ZMAT_REJ002
into war_abgru
where vkorg = vbak-vkorg
and kunnr <> vbak-kunnr
and MATNR = vbap-matnr
and datef <= vbak-vdatu
and datet >= vbak-vdatu.
if sy-subrc <> 0.
select single abgru from ZMAT_REJ003
into war_abgru
where vkorg = vbak-vkorg
and kunnr <> vbak-kunnr
and MATNR = vbap-matnr
and datef <= vbak-vdatu
and datet >= vbak-vdatu.
if sy-subrc <> 0.
select single abgru from ZMAT_REJ001
into war_abgru
where vkorg = vbak-vkorg
and werks <> vbap-werks
and matnr = vbap-matnr
and datef <= vbak-vdatu
and datet >= vbak-vdatu.
if sy-subrc <> 0.
select single abgru from ZMAT_REJ004
into war_abgru
where vkorg = vbak-vkorg
and matnr = vbap-matnr
and datef >= vbak-vdatu
and datet <= vbak-vdatu.
if sy-subrc <> 0.
else.
w_exist = 'X'.
endif.
else.
w_exist = 'X'.
endif.
else.
w_exist = 'X'.
endif.
else.
w_exist = 'X'.
endif.
if w_exist = 'X'.
end for check from managed codes table
*to find the quantity fields
SELECT SINGLE wmeng bmeng
FROM vbep
INTO (vbep-wmeng,vbep-bmeng)
WHERE vbeln EQ vbap-vbeln
AND posnr EQ vbap-posnr.
*to get info about the customer
SELECT SINGLE kunnr
FROM vbpa
INTO vbpa-kunnr
WHERE vbeln EQ vbak-vbeln
AND parvw EQ c_parvw_shipto.
IF sy-subrc EQ 0.
f_shipto_found = 'X'.
SELECT SINGLE name1 spras
FROM kna1
INTO (kna1-name1,kna1-spras)
WHERE kunnr EQ vbpa-kunnr.
IF sy-subrc EQ 0.
w_custname = kna1-name1.
CLEAR kna1-name1.
ENDIF.
ENDIF.
SELECT SINGLE kunnr
FROM vbpa
INTO vbpa-kunnr
WHERE vbeln EQ vbak-vbeln
AND parvw EQ c_parvw_csr.
IF SY-SUBRC EQ 0.
f_csr_found = 'X'.
SELECT SINGLE kunnr name1 name2 adrnr
FROM kna1
INTO (kna1-kunnr,kna1-name1,kna1-name2,
kna1-adrnr)
WHERE kunnr EQ vbpa-kunnr.
IF sy-subrc EQ 0.
w_csrno = kna1-kunnr.
w_csrname = kna1-name1.
CLEAR kna1-name1.
SELECT SINGLE tel_number tel_extens fax_number
FROM adrc
INTO (adrc-tel_number,adrc-tel_extens,
adrc-fax_number)
WHERE addrnumber EQ kna1-adrnr.
CLEAR: adr6, w_email.
SELECT SINGLE * FROM adr6 WHERE addrnumber = kna1-adrnr.
IF sy-subrc = 0.
w_email = adr6-smtp_addr.
ENDIF.
ENDIF.
ENDIF.
*to get the date format in french
IF kna1-spras NE c_eng.
w_month = sy-datum+4(2).
SELECT SINGLE ltx
FROM t247
INTO t247-ltx
WHERE spras EQ kna1-spras
AND mnr EQ w_month.
CONCATENATE sy-datum+6(2)
t247-ltx
sy-datum+0(4)
INTO w_ldate
SEPARATED BY space.
ELSE.
CONCATENATE sy-datum+4(2)
sy-datum+6(2)
sy-datum+0(4)
INTO w_ldate
SEPARATED BY c_sep.
ENDIF.
w_total = vbep-wmeng - vbep-bmeng.
IF w_total GT 0.
PERFORM fill_orders.
ELSE.
IF vbap-abgru NE space.
w_total = vbep-wmeng.
PERFORM fill_orders.
ENDIF.
ENDIF.
CLEAR vbap.
endif. " check for w_exist for Managed Codes entry
ENDSELECT.
IF tbl_ord[] IS INITIAL.
retcode = 1.
syst-msgid = 'FZ'.
syst-msgno = '027'.
syst-msgty = 'E'.
PERFORM protocol_update.
ENDIF.
IF f_csr_found IS INITIAL.
syst-msgid = '8B'.
syst-msgno = '127'.
syst-msgty = 'W'.
syst-msgv1 = c_parvw_csr.
PERFORM protocol_update.
ENDIF.
IF f_shipto_found IS INITIAL.
syst-msgid = '8B'.
syst-msgno = '127'.
syst-msgty = 'W'.
syst-msgv1 = c_parvw_shipto.
PERFORM protocol_update.
ENDIF.
ENDFORM. " get_orders
*& Form layout
text
--> p1 text
<-- p2 text
FORM layout.
SORT tbl_ord BY bstnk kdmat.
LOOP AT tbl_ord.
AT FIRST.
PERFORM writeform_text.
ENDAT.
PERFORM writeform.
AT LAST.
PERFORM writeform_footer.
ENDAT.
ENDLOOP.
CLEAR : cnt_1,cnt_2.
PERFORM closeform.
ENDFORM. " layout
*& Form openform
text
FORM openform USING us_screen us_country.
DESCRIBE TABLE tbl_ord LINES w_lines.
IF w_lines EQ 0.
retcode = '1'.
syst-msgid = 'FE'.
syst-msgno = '078'.
syst-msgty = 'E'.
PERFORM protocol_update.
ENDIF.
CHECK retcode EQ 0.
INCLUDE zrvadopfo.
ENDFORM. " openform
*& Form send_email
text
-->P_PROC_SCREEN text
FORM send_email USING PROC_SCREEN.
f_mail = 'X'.
PERFORM openform USING proc_screen vbak-landtx.
LOOP AT tbl_ord.
AT FIRST.
PERFORM writeform_text.
ENDAT.
PERFORM writeform.
AT LAST.
PERFORM writeform_footer.
ENDAT.
ENDLOOP.
CLEAR cnt_2.
PERFORM closeform.
CALL FUNCTION 'CONVERT_OTF'
EXPORTING
format = 'PDF' "'ASCII'
IMPORTING
bin_filesize = st_doc_data-doc_size
TABLES
otf = tbl_otf
lines = tbl_line
EXCEPTIONS "DEVK912166
err_max_linewidth = 1
err_format = 2
err_conv_not_possible = 3
OTHERS = 4.
IF sy-subrc NE 0.
retcode = sy-subrc.
syst-msgid = 'OA'. "DEVK912166
syst-msgno = '186'. "DEVK912166
syst-msgty = 'E'. "DEVK912166
PERFORM protocol_update.
ENDIF.
REFRESH tbl_objtxt.
CLEAR tbl_objtxt.
CLEAR tbl_proc_para.
REFRESH tbl_proc_para.
CLEAR tbl_maillist.
REFRESH tbl_maillist.
CLEAR tbl_pack_list.
REFRESH tbl_pack_list.
st_doc_data-obj_name = 'Sales Order Cut Letter'.
st_doc_data-obj_langu = 'E'. "DEVK905849
st_doc_data-sensitivty = 'F'. "DEVK905849
st_doc_data-obj_prio = 1. "DEVK905849
CONCATENATE w_type 'Cut Letter' INTO "#EC NOTEXT
st_doc_data-obj_descr SEPARATED BY space.
DATA w_line(3) TYPE c.
PERFORM format_pdf. "DEVK905849
concatenate VBAK-VBELN '.PDF' into tbl_objhead.
tbl_objhead = 'Sales Order Cut Letter.PDF'.
APPEND tbl_objhead.
"DEVK905849
CLEAR wrk_lines.
DESCRIBE TABLE tbl_attach LINES wrk_lines.
fields needed for email
tbl_maillist-com_type = 'INT'.
tbl_maillist-receiver = w_email.
tbl_maillist-rec_type = 'U'.
APPEND tbl_maillist.
send email
CALL FUNCTION 'SO_NEW_DOCUMENT_SEND_API1'
STARTING NEW TASK 'MAIL'
EXPORTING
document_data = st_doc_data
document_type = 'PDF'
COMMIT_WORK = 'X' " added after ECC6.0 upgrade
TABLES
object_header = tbl_objhead
object_content = tbl_objtxt
receivers = tbl_maillist
EXCEPTIONS "DEVK912166
too_many_receivers = 1
document_not_sent = 2
document_type_not_exist = 3
operation_no_authorization = 4
parameter_error = 5
x_error = 6
enqueue_error = 7
OTHERS = 8
IF sy-subrc NE 0.
retcode = sy-subrc.
syst-msgid = 'ZA_G'. "DEVK912166
syst-msgno = '922'. "DEVK912166
syst-msgty = 'E'. "DEVK912166
syst-msgv1 = sy-subrc. "DEVK912166
syst-msgv2 = tbl_smtp-adsmtp-smtp_addr. "DEVK912166
PERFORM protocol_update.
syst-msgid = 'VW'.
syst-msgno = '001'.
syst-msgty = 'E'.
syst-msgv1 = 'Print successful:email Recepient Invalid'."#EC NOTEXT
PERFORM protocol_update.
ENDIF.
ENDFORM. " send_email
*& Form fill_orders
text
--> p1 text
<-- p2 text
FORM fill_orders.
tbl_ord-bstnk = vbak-bstnk.
tbl_ord-kdmat = vbap-kdmat.
tbl_ord-xblnr = vbak-vbeln.
tbl_ord-ean11 = vbap-pmatn.
tbl_ord-arktx = vbap-arktx.
tbl_ord-csrno = w_csrno .
tbl_ord-csremail = w_email.
tbl_ord-spras = kna1-spras .
tbl_ord-csrphone = adrc-tel_number.
tbl_ord-csrfax = adrc-fax_number.
tbl_ord-csrext = adrc-tel_extens.
tbl_ord-total = w_total.
tbl_ord-custname = w_custname.
tbl_ord-csrname = w_csrname .
tbl_ord-ldate = w_ldate.
APPEND tbl_ord.
CLEAR tbl_ord.
CLEAR w_total.
CLEAR w_ldate.
ENDFORM. " fill_orders
*& Form writeform_text
text
--> p1 text
<-- p2 text
FORM writeform_text.
CALL FUNCTION 'WRITE_FORM'
EXPORTING
element = 'WTEXT'
window = 'WINDOW2'
EXCEPTIONS
element = 1
window = 2.
IF sy-subrc NE 0.
retcode = sy-subrc.
syst-msgid = 'EBR'.
syst-msgno = '056'.
syst-msgty = 'E'.
syst-msgv1 = 'WTEXT'.
syst-msgv2 = 'WINDOW2'.
PERFORM protocol_update.
ENDIF.
ENDFORM. " writeform_text
*& Form writeform
text
--> p1 text
<-- p2 text
FORM writeform.
CALL FUNCTION 'WRITE_FORM'
EXPORTING
element = 'EMAIN'
window = 'MAIN'
EXCEPTIONS
element = 1
window = 2.
IF sy-subrc NE 0.
retcode = sy-subrc.
syst-msgid = 'EBR'.
syst-msgno = '056'.
syst-msgty = 'E'.
syst-msgv1 = 'WTEXT'.
syst-msgv2 = 'WINDOW2'.
PERFORM protocol_update.
ENDIF.
ENDFORM. " writeform
*& Form writeform_footer
text
--> p1 text
<-- p2 text
FORM writeform_footer.
IF nast-spras = 'N'.
CALL FUNCTION 'WRITE_FORM'
EXPORTING
element = 'FOOTER'
window = 'MAIN'
EXCEPTIONS
element = 1
window = 2.
ENDIF.
CALL FUNCTION 'WRITE_FORM'
EXPORTING
element = 'WFOOTER'
window = 'WINDOW12'
EXCEPTIONS
element = 1
window = 2.
IF sy-subrc NE 0.
retcode = sy-subrc.
syst-msgid = 'EBR'.
syst-msgno = '056'.
syst-msgty = 'E'.
syst-msgv1 = 'WFOOTER'.
syst-msgv2 = 'WINDOW12'.
PERFORM protocol_update.
ENDIF.
ENDFORM. " writeform_footer
*& Form closeform
text
--> p1 text
<-- p2 text
FORM closeform.
CALL FUNCTION 'CLOSE_FORM'
TABLES
otfdata = tbl_otf
EXCEPTIONS
unopened = 1
bad_pageformat_for_print = 2
OTHERS = 3.
IF sy-subrc NE 0.
retcode = sy-subrc.
syst-msgid = 'PS'.
syst-msgno = '005'.
syst-msgty = 'E'.
PERFORM protocol_update.
ENDIF.
ENDFORM. " closeform
*& Form format_pdf
text
--> p1 text
<-- p2 text
FORM format_pdf.
FIELD-SYMBOLS <fs>.
DESCRIBE TABLE tbl_line LINES hltlines.
DESCRIBE FIELD tbl_line LENGTH fle1 IN BYTE MODE . Defect#1579-
DESCRIBE FIELD tbl_objtxt LENGTH fle2 IN BYTE MODE . Defect#1579-
Start of Defect#1579+
DESCRIBE FIELD tbl_line LENGTH fle1 IN CHARACTER MODE.
DESCRIBE FIELD tbl_objtxt LENGTH fle2 IN CHARACTER MODE.
End of Defect#1579+
CLEAR tbl_objtxt.
REFRESH tbl_objtxt.
LOOP AT tbl_line.
htabix = sy-tabix.
MOVE tbl_line TO hfeld+off1.
IF htabix = hltlines.
fle1 = strlen( tbl_line ).
ENDIF.
off1 = off1 + fle1.
IF off1 GE fle2.
CLEAR tbl_objtxt.
tbl_objtxt = hfeld(fle2).
APPEND tbl_objtxt.
SHIFT hfeld BY fle2 PLACES.
off1 = off1 - fle2.
ENDIF.
IF htabix = hltlines.
IF off1 GT 0.
CLEAR tbl_objtxt.
tbl_objtxt = hfeld(off1).
APPEND tbl_objtxt.
ENDIF.
ENDIF.
ENDLOOP.
ENDFORM. " format_pdf
ANy Suggestion or help will be appreciated!
Regards,
Kittu
Edited by: Kittu on Jun 30, 2008 12:32 PMHello Julie Waller,
Very Good evening!
Thank you very much for your response!
Sometimes...I miss the basic things and start concentarcting on typical ways to fix the issue. ....which will only make my issue critical.
Hello Sathya,
Thank you for your response!
POints are rewarded..
Have a great day ahead!
Regards,
Kittu -
How to use the set functions effectively in webi ,please let me know with detail
how to use the set functions effectively in webi ,please let me know with detail
Hi,
we use use set functions on heirarchies with aggregate functions mostly .
If you include member_set, Min returns the minimum value of the aggregated data for all members in the member set.
Member_set can include multiple sets separated by semicolons (;).
The list of member sets must be enclosed in {}.
If the member set expression does not specify a precise member or node, the hierarchy referenced must be present in the table, then the member set expression references the current member in the hierarchy in the table. If the hierarchy is not in the table, the function returns the message #MULTIVALUE.
Eg .
1) Ancestor
=Sum([YTD] ; {Ancestor([Test Hierarchy];2)})
2) IsLeaf
=[Test Hierarchy].IsLeaf
You can use this function when you want to show your Measure only at lower level .
3) .Depth
=[Test Hierarchy].Depth
This is also function used with hierarchy to find Level of Members .
Follow this link for PDF reference .
Page 147
https://www.google.co.in/url?sa=t&rct=j&q=&esrc=s&source=web&cd=2&cad=rja&ved=0CDIQFjAB&url=https%3A%2F%2Fhelp.sap.com%2Fbusinessobject%2Fproduct_guides%2Fboexir4%2Fen%2Fxi4sp5_ffc_en.pdf&ei=nBAUU-iUM4WWrAeMuoCoDg&usg=AFQjCNHakXsEjd_yUk2y3lVdibf3PXpEOA&bvm=bv.61965928,d.bmk
search on SCN this question was discussed before also one those links .
http://scn.sap.com/thread/3183380
Hope this will help you .
Maybe you are looking for
-
.pdf file changed into .tmp when trying to send pdf file as attachment
Dears, A few days now, .pdf files are exported as .tmp files if we try to send them as attachment directly from the adobe reader plug-in in internet explorer 8. Unfortunatly Outlook interprets .tmp files as harmfull, so we are no longer able to send
-
Photoshop CS5 will not open in one of four accounts why
I have an issue with Photoshop not opening in one of my four accounts on my MacPro. I had t change my bootup drive to a larger one. Now, whenever I try to open Photoshop CS5 in my primary standard account it says that it cannot find the scratch dis
-
Blank DVD and CD not showing up in Finder or anywhere
My blank dvd and cd are not showing up in Finder. I checked my preference and deleted from my library com.apple.finder.plist. All to no avail. I have the new upgraded Lion.
-
My HD installation, thanks for tips
I wanted to go with WD black scorpio but after hearing from and here and other reviews that it had problems I went with the Hitachi travelstar 7200.. Kudos for Newegg. $98 free shipping with a $30 rebate and I got it the next day, wow. I did it mysel
-
SAP HR LSO: Removed fields on course (Object E)
Dear all, When booking a Course in LSO there the section (with fields) called the "price and cost assignment". We would like to remove this from the Course. Would anyone know if it is possible to remove this, and how? We would also like to remove the