Hard Drive Crash - need help with choosing new drive and installation

My hard drive seems to have crashed. My computer froze, and when I tried to reboot, it got stuck at the startup screen. I started from the system CD, ran the disk repair utility, and it said it could not repair the disk. I ran Tech Tool Pro and it could not repair the disk. I tried to start up in Target disk mode while connected to my older G4 iMac (that I'm using now as my backup), and the disk would not mount. So I need some expert advice - I am assuming the hard drive is toast. I wish I could at least mount it in target disk mode to transfer files, but I haven't been able to do that. I was going to take it in for repair (or possibly buy a new computer), but after reading some of the posts here, I am thinking I could just replace the internal hard drive with a 3.5" SATA drive.
What I need to know is am I correct about this? And is this the right kind of drive for my iMac? Are there any specifications I need to be aware of when ordering a new drive? I downloaded the manual explaining how to replace the drive and it looks doable. I would appreciate any guidance as to choosing the new drive (specific brand names/models would be great), installing the drive, and tips for formatting, etc. Thanks in advance for your help!

Welcome to Discussions - any 3 1/2" SATA drive will be fine, go to [macsales.com] or [smalldog.com] or [newegg.com] and choose whichever drive fits your wallet. Most of them are reliable, I have heard of problems with Seagate and Hitachi, but there are always some failures with any brand. Make sure to get a good warranty.Instructions will come with the drive, but you can download them from [Apple|http://www.apple.com/support/manuals/imac> as well.

Similar Messages

  • Hard drive crash need help with new iTunes load and backup files

    I have looked through the posts and not found my situation.
    I had my iPhone synced to a PC computer and the hard drive crashed. I had an extensive library in iTunes, but none of the music was purchased online so I can't simply download it again. It was all from CD's, many of which belonged to friends. I now have an iMac. The music I like is still on my iPhone, but not on my new iMac. When I try to sync the iPhone with my iMac it wants to delete all the music on my iPhone. Is there any way to copy the music off my iPhone first - so I can add it back into my iTunes library?

    Yes, luckily I have been in this situation.
    You can download a free application that will take your music from your iPhone and place it onto your Macintosh HD.
    One of these should suit your needs:
    http://www.macupdate.com/app/mac/19890/ipoddisk
    http://www.wideanglesoftware.com/touchcopy/index.php?gclid=CPjvvOiyr6gCFaNl7Aodm h6QIQ
    http://www.headlightsoft.com/detune/
    I hope this helped.

  • Need help with Error Code 205 and installation

    not installed on my computer the premier adorbe cs6 , code 205 appears
    Message was edited by: Kevin Monahan
    Reason: please enter a better title next time

    Hi Gyrus,
    See if this doc helps you: https://helpx.adobe.com/creative-cloud/kb/error-downloading-cc-apps.html
    Thanks,
    Kevin

  • Need help with my iPhone 5 and my Macbook Pro.

    Need help with my iPhone 5 and my Macbook Pro.  I was purchased some music on itunes at my mac. Some reason I deleted those music from both on Mac and iPhone 5.  Today, I went to my iPhone iTunes store inside of iCloud to redownload my puchased. But those song won't able to sync back to my iTunes library on my Mac.  Can anyone help me with that ??....
    iPhone 5, iOS 6.0.1

    You've posted to the iTunes Match forum, which your question does not appear to be related to. You'll get better support responses by posting to either the iTunes for Mac or iTunes for Windows forum. Which ever is more appropriate for your situation.

  • Need help with choosing a 6 cell and 9 cell battery (mo06, mo09)

    Hey hi all,
    I have a pavilion m6 series notebook which comes with mo06(6 cell) battery by default.
    I need to replace the battery with a new one and I've come across a mo09 (9 cell) battery with the same price as that of mo06.
    I've no idea if mo09 batteries can be used instead of mo06.
    If anyone who knows anything about this please help me choose.
    Here's the link
    http://hpshopping.in/Accessories/Batteries
    Thanks a lot in advance

    Hi
    Sorry was the delay wanted to make sure the battery should work fine for your unit.
    672412-001  SPS-BATT 9C 100WHr 3.0AH LI MO09100-CL  
    Let us know how it goes!
    "I work for HP."
    ****Click the (purple thumbs up icon in the lower right corner of a post) to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    Regards
    Manjunath

  • Need help with choosing a PSU

    hey guys,
    i need some help with choosing a right PSU for my gaming rig.  i plan on doing some overclocking for the first time, and from what i understand the regular no name PSU that came with my case just won't be enough.  so here is what i'm currently looking at:
    http://www.newegg.com/app/ViewProductDesc.asp?description=17-103-910&depa=1
    my question is, is this a good PSU?  it's going for roughly $100 and i'm willing to pay around that much.  can someone tell me if this is a good choice, or any other recommendations? thanks in advance!
    btw, my specs are below in my sig...

    LOL...you ol fartin' son-of-a-gun!!!! We gotta be supportive to all here - no favorites. But if I had to make choices, you're the first one I'd help build one!!!! Feel better now ....you 'ol Salty Dog?
    I just may have to make a trek up to Washington one day, to see the U.S.S. Washington....berthed in Bremerton?, and meet you, you crazy mad-for-life-lovin-computer jockey!!

  • I need help with my new ipod on windows me

    I bought myself an ipod in the states (usa) i was told it was universal & can be used in the uk! i have windows ME & was also told this would be compatible with this computer but once i tried to download my software of the cd & put in my details of the ipod it came up with the following error message:ERROR 1904.MODULEC:\PROGRAM FILES\IPOD\IPOD UPDATER 2005-02-07\IPOD UPDATER EXT.Dll FAIIED TO REGISTER .HRESULT-2147220473 CONTACT YOUR SUPPORT PERSONELL.
    can any one help????
    aslo i was told once downloaded onto my p.c i then cant use my ipod on another p.c this does not make any sense say if you upgrade your p.c does this mean you then cant use your ipod anymore ??? please help me ???

    Hello Andrew,
    Was the reply I gave you in the other post you made of no help?
    I explained that Windows ME is not compatible, but you can get it work with a little messing around, and once again, here's a link on how to do it.
    Guide to iPod and Windows ME.
    As I said previously though, you won't be able to use iTunes.
    See my other answer to you here.
    Jeff Bryan, "Need help with my iPod." #4, 06:13am Aug 8, 2005 CDT

  • I need help with my text tone and I have ring tone. no text tone for the 4s.

    I need help with my text tone. I have ring tone no text tone. I have a 4s.

        Hi Sarar2333!  Let's get your text tones working again!
    Here's a link with instructions how to enable and change your alert sounds for your text/notification settings on your iPhone 4S: http://vz.to/1stiF8a.  You can ensure text tones are enabled by selecting a tone in the "Text Tone" setting.  Let me know how that works out for you.  Thanks!
    AnthonyTa_VZW
    Follow us on Twitter @VZWSupport

  • Need help with buying graphics card and ram for MSI 865PE NEO 2-V

    Hi,
    I want to buy 1GB of ram for motherboard MSI 865PE NEO 2-V I need help with finding correct parts.
    I also want to buy 512Mb or 1GB graphics card.
    as i said before i need help with finding correct ones so they match motherboard, I would appreciate if any one would post link to cheap and fitting parts.
    I found graphics card allready, i just need to know if it will fit.
    the card is
    NVIDIA GeForce 7600 GS (512 MB) AGP Graphics Card
    Thanks for help.

    here you can see test reports for your mobo:
    http://www.msi.com/product/mb/865PE-Neo2-V.html#?div=TestReport

  • Need help with clickbios ii terminolgy and values. Z77A-GD65 / 3770k

    Hello All 
    I recently purchased a Z77A-GD65 board and after searching I've found the differences in terminology between this and my previous Asus board but still have a couple of settings I cant find any info on.
    System Specs:
    motherboard: msi z77a-gd65
    cpu: intel 3770k
    ram: corsair vengeance 2133mhz 1.5v
    psu: corsair 850w
    First things first is I believe I am running in turbo oc mode. I've selected the oc genie tab on the center right of the bios screen and proceeded to change settings there. With cpu voltage on auto and vdroop set to 50% at 4.6ghz. (I'll try and get screenshots of bios settings soon)
    The following are the terms I need help with:
    In the my oc genie section;
     1. Long duration power limit
     2. Long duration maintained
     3. Short duration power limit
    In the main overclocking section;
     4. Digital Compensation level (not in owners manual, options auto/high)
     5. Cpu core ocp expander (enabled for overclock 4.5ghz+?)
    In the CPU Features section;
     6. long duration power limit w (does "w" stand for watts?)
     7. long duration maintained s   (does "s" stand for seconds?)
     8. short duration power limit
     9. primary plane current limit a  (does "a" stand for amps?)
    10. secondary plane current limit
    11. primary plane turbo power limit
    12. secondary plane turbo power
    I know those are a lot of settings, but would appreciate any simple definitions as to what they do and recommended values for mild overclocking (4.5-4.80)
    Also on my previous board (Asus P8P67 Pro) my 3770k was stable in prime95 for 18 hrs at 4.5ghz fixed 1.155v with only ram timings put in manually and LLC set to extreme.(or whatever max is called in asus bios) Voltage was fixed and everything else was defailts.

    Well I'm back.  Been digging around for a few days and found some answers to my questions.
    First things first s that for some reason I could not adjust voltage values with the + or - symbols. Clearing cmos did not help this. I had to reflash the bios to get this functionality back as well as clearing cmos before and after the flash.
    So I figured out the values in the oc genie section are the same as the normal section but only used when your using the oc genie. (numbers 1-3)
    Digital compensation level and ocp expander should be set to high and enabled respectively when going for higher overclocks. (4 and 5)
    Now for the rest of my questions ( 6 through 12) I have found suggested settings and some info after hours and hours of searching but still have a couple of questions about them.
    Long/short duration power limit, and primary/secondary plane turbo limit. I see suggestion settings of 250 or 255. I take it this is simply max supplied watts to the chip? If so why the 250/255 values? Is that the highest the board will give? Is plane turbo limit related to the enhanced turbo stated and how much wattage can be drawn there while the other limit is for any non turbo frequencies?
    Long duration maintained, I've seen 60 suggested a lot. Why is this?
    There's not an over abundance of info on these boards as compared to asus so it seems info is a little less documented and video tutorials explaining things are next to none.
    Any help would be appreciated. Thanks 

  • HT4528 I need help with my I phone and I can get verizon to let me on there to talk and I will have to have my phone so that I can do what you tell me to do

    I need help with my phone it is not ringing and I cant figure where in here to make it so it will something has been pushed so I cant hear any calls or texts

    Not when you insist on being so impatient.
    These are user to user support forums.  No one here is paid to read or respond to messages.
    Try explaining the issue instead of the jumbled, rambling mess of a title and we will be happy to assist.

  • T61 - New hard drive. Need help with drivers

    I just installed a new hard drive (upgraded from 80 gb to 320 gb) and I want to redownload all of the thinkpad functions. As of now, when i use the volume button, it does not appear on the screen so I cannot tell how high it is. Also, when i try to scroll using the touchpad (the right side) it does not work. Can somebody list for me all of the drivers and things that I would need to download to get me back on track? Thanks

    http://www-307.ibm.com/pc/support/site.wss/document.do?lndocid=MIGR-67853
    this is the list of all the compatible drivers for your laptop. 
    Regards,
    Jin Li
    May this year, be the year of 'DO'!
    I am a volunteer, and not a paid staff of Lenovo or Microsoft

  • Need help with installing new hard drive in Satellite Pro M10

    Hi All,
    My hard disk died in my Satellite Pro M10 so I decided to fit another.
    It fits fine in the caddy but just doesnt want to slot into place correctly as something seems to be stopping it.
    Does the M10 only accept a certain make/model?
    Also does anyone know what the highest capacity the M10 will accept?
    Many thanks.
    Regards
    J

    As far as I know there should not be problem at all. Take old and new HDD and compare the connectors. I hope they are the same. I can just imagine the new HD is not placed properly in the HDD bracket. Be sure the new one is placed as old one after removing it from the notebook.
    About max HDD capacity there is no precise info and we can just speculate about it. Try to use search option on this forum. Maybe someone already wrote about HDD upgrade on Sat/Sat Pro M10.
    The fact is that Satellite Pro is delivered with 30, 40 and 60 GB HDDs. How many GB has your new HDD?

  • Need help with kernal panic drive!

    Hi,
    While I was erasing 10,000 items from my trash, my G5 Quad kernal panicked and when I restarted it kept kernal panicking. I brought the computer to the Apple Genius at the store and they basically found that the boot hard drive, (my main drive) was needed to be replaced. They have sent me a new drive but I need to send the old one back.
    I have put the drive in a new firewire enclosure but when i hook it up to a computer and start it up, it make my computer kernal panick and I am not able to do anything with it.
    I have Date Rescue II and was hoping I could recover some of the files. Will this be possible? Can I make it so the kernal panicking does not happen so I can attempt a rescue?
    G5 Quad   Mac OS X (10.4.7)   2 Hitachi 500GB Drives and 4 external fw seagates

    Hi Brett and welcome to Apple Discussions.
    You could try Starting up in Safe Mode
    What is Safe Boot, Safe Mode
    Safe Boot takes longer than normal startup
    Safe boot may by-pass the problematic process/hardware (the airport card is a frequent culprit) and enable you to boot sufficiently to find out the OS. Click on the blue Apple top/left, then 'About this Mac'. If Safe Boot is successful take a look at Macintosh HD/Library/Logs, particularly Console and Panic. I'm no expert on deciphering logs but you could copy/past the last couple of paragraphs of Panic into a reply.
    Good luck,
    Adrian

  • Need help with cd/dvd drive problem.

    I have a MacBook (black) running OS 10.6.8. The internal cd/dvd drive no longer works. I put in a disk and it gets pushed back out after a few seconds.
    I just bought a LG Ultra Slim Portable DVD Writer model GP 60NB50. The MacBook recognizes the LG drive for opening music and movies, and for burning photos to a disk.
    I have been unable to use the LG drive as a start-up drive. I put Disk Warrior into the drive and restarted the computer holding down the “C” key. When the computer starts to launch there is a flash of a “?” on the screen then it loads from the hard disk. I also tried using the Apple start up disk that came with the computer but that also failed.
    Any idea how I can get the LG drive to become a start-up drive when needed?
    Thanks,
    Orin

    If your computer is a TouchSmart, and I am only guessing that it is, this document might help.
    Good luck!
    http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01496336&tmp_task=solveCategory&lc=en&dlc=en&cc...
    GeorgeFN
    I work on behalf of HP.

Maybe you are looking for

  • Why no support for 3560 Compact series in CNA?

    Is there reason why WS-C3560C-8PC-S and WS-C3560C-12PC-S is not supported in Cisco Network Assistent? According to the data sheets for these switches CNA should be supported. I saw another forum post stating that the Gigabit versions has been added t

  • Can someone download photos from web gallery?

    Can someone download individual photos from my web gallery? I am posting about 40 photos in the web gallery.I want people that visit to be able to download the photos they want. I tried it and it is set to download the entire album compressed. The vi

  • Viewing Icons in Oracle Forms on the Web - any solutions?

    Has anyone had problems viewing icons when deploying forms on the web? In client server mode it used to be .ico files. I recently converted our files to .gif and added a register UI_ICON to recognize the icon images when running the forms. I still ca

  • Active x and web control

    I'm using Microsoft WebBrowser in my activex container. My vi is ultimately going to be a help file that accepts two strings. The first is a url of the help file(written in HTML) and the second is just some text.(ie..what the user wants to find help

  • Problem with receiving and making a call after updating OS.

    I just updated my Z10 Model STL100-3 with the new OS 10.3.2.2168. I now cannot answer incoming calls. The phone rings, but there is no screen displayed to answer or decline the call. I'm also unable to unlock while the phone is ringing. Once the call