Hard Drive is not spinning up making rhythmic click sounds

Hello,
My Hard Drive is not spinning up and making rhythmic click sounds. I charged it completely. Tried to reset it but this results only in the Folder-Icon with a support link. It can not be connected to my computer anymore via USB. It is not recognized as a external disk anymore. I tried the disk mode too. nothing helps.
As I can't connect it to my computer anymore I can't reformat it.
Any ideas besides throwing it away...?
Thanks, Juergen
4G Click Wheel 40 Gig   Windows 2000  

Hello,
If a sad iPod icon or an exclamation point and folder icon appears on your iPod’s screen, or with sounds of clicking or HD whirring, it is usually the sign of a hard drive problem and you have the power to do something about it now. Your silver bullet of resolving your iPod issue – is to restore your iPod to factory settings.
http://docs.info.apple.com/article.html?artnum=60983
If you're having trouble, try these steps at different levels one at a time until the issue is resolved. These steps will often whip your iPod back into shape.
Make sure you do all the following “TRYs”
A. Try to wait 30 minutes while iPod is charging.
B. Try another FireWire or USB through Dock Connector cable.
C. Try another FireWire or USB port on your computer .
D. Try to disconnect all devices from your computer's FireWire and USB ports.
E. Try to download and install the latest version of iPod software and iTunes
http://www.apple.com/itunes/download/
For old and other versions of iPod updater for window you can get here
http://www.ipodwizard.net/showthread.php?t=7369
F. Try these five steps (known as the five Rs) and it would conquer most iPod issues.
http://www.apple.com/support/ipod/five_rs/
G. Try to put the iPod into Disk Mode if it fails to appear on the desktop
http://docs.info.apple.com/article.html?artnum=93651
If none of these steps address the issue, you may need to go to Intermediate level listed below in logical order. Check from the top of the lists to see if that is what keeping iPod from appearing on your computer in order for doing the Restore.
Intermediate Level
A. Try to connect your iPod with another computer with the iPod updater pre-installed.
B. Still can’t see your iPod, put it in Disk Mode and connect with a computer, instead of doing a Restore on iPod Updater. Go and format the iPod instead.
For Mac computer
1. Open the disk utility, hope your iPod appears there (left hand side), highlight it
2. Go to Tab “Partition”, click either “Delete” or “Partition”, if fails, skip this step and go to 3
3. Go to Tab “Erase” , choose Volume Format as “MAC OS Extended (Journaled), and click Erase, again if fails, skip it and go to 4
4. Same as step 3, but open the “Security Options....” and choose “Zero Out Data” before click Erase. It will take 1 to 2 hours to complete.
5. Eject your iPod and do a Reset
6. Open the iTunes 7 and click “Restore”
For Window computer
Go to folder “My Computer”
Hope you can see your iPod there and right click on the iPod
Choose “Format”. Ensure the settings are at “Default” and that “Quick Format” is not checked
Now select “Format”
Eject your iPod and do a Reset
Open the iTunes 7 and click “Restore”
In case you do not manage to do a “Format” on a window computer, try to use some 3rd party disk utility software, e.g.“HP USB Disk Storage Format Tool”.
http://discussions.apple.com/thread.jspa?threadID=501330&tstart=0
C. Windows users having trouble with their iPods should locate a Mac user. In many cases when an iPod won't show up on a PC that it will show up on the Mac. Then it can be restored. When the PC user returns to his computer the iPod will be recognized by the PC, reformatted for the PC, and usable again. By the way, it works in reverse too. A Mac user often can get his iPod back by connecting it to a PC and restoring it.
Tips
a. It does not matter whether the format is completed or not, the key is to erase (or partly) the corrupted firmware files on the Hard Drive of the iPod. After that, when the iPod re-connected with a computer, it will be recognized as an fresh external hard drive, it will show up on the iTunes 7.
b. It is not a difficult issue for a Mac user to find a window base computer, for a PC user, if they can’t find any Mac user, they can go to a nearest Apple Shop for a favor.
c. You may need to switch around the PC and Mac, try to do several attempts between “Format” and “Restore”
http://discussions.apple.com/thread.jspa?messageID=2364921&#2364921
Advance Level
A. Diagnostic mode solution
If you have tried trouble shooting your iPod to no avail after all the steps above, chances are your iPod has a hardware problem. The iPod's built-in Diagnostic Mode is a quick and easy way to determine if you have a "bad" iPod.
You need to restart your iPod before putting it into Diagnostic Mode. Check that your hold switch is off by sliding the switch away from the headphone jack. Toggle it on and off to be safe.
Press and hold the following combination of buttons simultaneously for approximately 10 seconds to reset the iPod.
iPod 1G to 3G: "Menu" and "Play/Pause"
iPod 4G+ (includes Photo, Nano, Video, and Mini): "Menu" and "Select"
The Apple logo will appear and you should feel the hard drive spinning up. Press and hold the following sequence of buttons:
iPod 1G to 3G: "REW", "FFW" and "Select"
iPod 4G+ (includes Photo, Nano, Video, and Mini): "Back" and "Select"
You will hear an audible chirp sound (3G models and higher) and the Apple logo should appear backwards. You are now in Diagnostic Mode. Navigate the list of tests using "REW" and "FFW". The scroll wheel will not function while in diagnostic mode. For further details on Diagnostic mode can be found at http://www.methodshop.com/mp3/ipodsupport/diagnosticmode/
Try to do the 5in1, HDD R/W and HDD scan tests. Some successful cases have been reported after the running the few tests under the Diagnostic mode. In case it does not work in your case, and the scan tests reports show some errors then it proves your iPod has a hardware problem and it needs a repairing service.
B. Format your iPod with a start disk
I have not tried this solution myself, I heard that there were few successful cases that the users managed to get their iPod (you must put your iPod in disk mode before connecting with a computer) mounted by the computer, which was booted by a system startup disk. For Mac, you can use the Disk Utility (on the Tiger OS system disk), for PC user, you can use the window OS system disk. Try to find a way to reformat your iPod, again it does not matter which format (FAT32, NTFS or HFS+) you choose, the key is to erase the corrupted system files on the iPod. Then eject your iPod and do a Reset to switch out from Disk Mode. Reboot your computer at the normal way, connect your iPod back with it, open the iPod updater, and hopefully your iPod will appear there for the Restore.
If none of these steps address the issue, your iPod may need to be repaired.
Consider setting up a mail-in repair for your iPod http://depot.info.apple.com/ipod/
Or visit your local Apple Retail Store http://www.apple.com/retail/
In case your iPod is no longer covered by the warranty and you want to find a second repairing company, you can try iPodResQ at your own risk
http://www.ipodresq.com/index.php
Just in case that you are at the following situation
Your iPod warranty is expired
You don’t want to pay any service charges
You are prepared to buy a new one
You can’t accept the re-sell value of your broken iPod
Rather than leave your iPod as paper-weight or throw it away.
You can try the following, but again, only do it as your last resort and at your own risk.
Warning !!!! – It may or may not manage to solve your problem, and with a risk that you may further damage your iPod, which end up as an expensive paper weight or you need to pay more higher repairing cost. Therefore, please re-consider again whether you want to try the next level
Last Resort Level
1. . Disconnecting the Hard Drive and battery inside the iPod – Warning !! Your iPod warranty will be waived once you open the iPod.
In Hong Kong there are some electronic shops offering an iPod service for Sad iPod, the first thing they do is to open up the iPod’s case and disconnecting the battery and the Hard Drive from the main board of the iPod. Wait for 5-10 minutes and reconnecting them back. The reason behind which I can think of is to do a fully reset of a processor of the iPod. In case you want do it itself and you believe that you are good on fixing the electronics devices and have experience to deal with small bits of electronic parts, then you can read the following of how to open the iPod case for battery and HDD replacement (with Quicktimes)
http://eshop.macsales.com/tech_center/index.cfm?page=Video/directory.html
2.Press the reset button on the Hard Drive inside the iPod – Suggestion from Kill8joy
http://discussions.apple.com/thread.jspa?messageID=2438774#2438774
Have I tried these myself? No, I am afraid to do it myself as I am squeamish about tinkering inside electronic devices, I have few experiences that either I broke the parts (which are normally tiny or fragile) or failed to put the parts back to the main case. Therefore, I agree with suggestion to have it fixed by a Pro.
2. Do a search on Google and some topics on this discussion forum about “Sad iPod”
Exclamation point and folder and nothing else
http://discussions.apple.com/thread.jspa?messageID=2831962#2831962
What should I do with my iPod? Send it or keep it?
http://discussions.apple.com/thread.jspa?threadID=469080&tstart=0
Strange error on iPod (probably death)
http://discussions.apple.com/thread.jspa?threadID=435160&start=0&tstart=0
Sad Face on iPod for no apparent reason
http://discussions.apple.com/thread.jspa?threadID=336342&start=0&tstart=0
Meeting the Sad iPod icon
http://askpang.typepad.com/relevanthistory/2004/11/meeting_thesad.html#comment-10519524
Sad faced iPod, but my computer won’t recognize it?
http://discussions.apple.com/thread.jspa?messageID=2236095#2236095
iPod Photo: unhappy icon + warranty question
http://discussions.apple.com/thread.jspa?messageID=2233746#2233746
4th Gen iPod Users - are we all having the same problem?
http://discussions.apple.com/message.jspa?messageID=2235623#2235623
Low Battery, and clicking sounds
http://discussions.apple.com/thread.jspa?messageID=2237714#2237714
Sad faced iPod, but my computer won’t recognize it
http://discussions.apple.com/thread.jspa?messageID=2242018#2242018
Sad iPod solution
http://discussions.apple.com/thread.jspa?threadID=412033&tstart=0
Re: try to restore ipod and it says "can't mount ipod"
http://discussions.apple.com/thread.jspa?threadID=443659&tstart=30
iPod making clicking noise and is frozen
http://discussions.apple.com/thread.jspa?messageID=2420150#2420150
I am not suggesting that you should follow as well, but just read them as your reference. You are the person to make the call.
Finally, I read a fair comments from dwb, regarding of slapping the back of the iPod multiple times
Quote “This has been discussed numerous times as a 'fix'. It does work, at least for a while. In fact I remember using the same basic trick to revive Seagate and Quantam drives back in the mid to late 1980's. Why these tiny hard drives go bad I don't know - could be the actuator gets stuck in place or misaligned. Could be the platter gets stuck or the motor gets stuck. 'Stiction' was a problem for drives back in the 80's. Unfortunately the fix can cause damage to the platter so we temporarily fix one problem by creating another. But I know of two instances where a little slap onto the table revived the iPods and they are still worked a year or more later.”UnQuote

Similar Messages

  • Hard Drive does not start spinning on t410

    I have a Thinkpad t410 and I recently purchased a larger Hard Drive and installed it a week ago . Installation went fine, windows installed perfectly, and everything seemed fine until yesterday when I rebooted and the system hung on the lenovo bios boot screen (lenovo logo and the 'Press the blue ThinkVantage button to interrupt startup) because the hard drive was not spinning.  After restating a few times, the hard drive came up and boot went on as normal.  Since then, this has happened every time I have turned off my system, and a few hours ago has started when I wake the system from standby.  I initial thought was that it was a bad hard drive, but when I put the hard drive in a different laptop, it functioned perfectly.  This does not occur if I restart the computer, only if I shut it down so the hard drive stops spinning and needs to turn back on.   Thanks for any help you can offer.

    Hello mandalorethx, welcome to Lenovo Forum!
    Please provide us with the manufactorer of your hdd and which model exactly.
    Follow @LenovoForums on Twitter! Try the forum search, before first posting: Forum Search Option
    Please insert your type, model (not S/N) number and used OS in your posts.
    I´m a volunteer here using New X1 Carbon, ThinkPad Yoga, Yoga 11s, Yoga 13, T430s,T510, X220t, IdeaCentre B540.
    TIP: If your computer runs satisfactorily now, it may not be necessary to update the system.
     English Community       Deutsche Community       Comunidad en Español

  • I have an older macbook pro and the hard drive is starting to go (making loud noises). i tried to back up to an external hard drive (my passport essential se) using time machine and the computer keeps shutting down. suggestions to complete backup please?

    I have an older macbook pro and the hard drive is starting to go (making loud noises). i tried to back up to an external hard drive (my passport essential se) using time machine and the computer keeps shutting down. the same thing happens when just trying to save my pictures from iphoto to a flash drive. suggestions to complete backup please?

    Sounds like you'll need to access that drive while it is not booted. You need to replace it anyway, so do that, then one way or another (ext enclusure, et), access it and copy files.
    If you keep trying to boot it, you might kill it for good and not get your files, so just swap it out first.

  • My external hard drive is not working on my mac.

    I have tried all options available such as going on finder and making my hard drives visible and disk utilities

    Basically my external hard drive would not eject so i force quit it and the hard drive does not come up at all anywhere on my mac pro OS X version 10.9.4 and it isn't visible in disk utilities no and it doesn't say format either and i have tried it on a windows computer it does not show on their either. the format is Fatdos i think so i can use it on windows and mac and i cant see anything in system reports and yes it is connect by a USB. also it isn't making any noises either

  • HT5622 My Ipod Classic shows a red circle with a cross in the middle. I've completed diagnostic tests which have popped up, however any HP/FW/Hard Drive tests freeze the ipod, as if the hard drive won't spin. What do I do?

    My Ipod Classic shows a red circle with a cross in the middle. I've completed diagnostic tests which have popped up, however any HP/FW/Hard Drive tests freeze the ipod, as if the hard drive won't spin. What do I do?
    After holding down the Select and Play/Pause button, I was able to restart the Ipod and then it brought me to a Diagnositc test. I have tried doing both the Mannual and Annual test on the ipod however in each test, the ipod freezes on different access tests. The HP (headphones) test, shows the headphones are detected, but then if it tries to play a song to make sure they work it freezes and goes back to the red cross. I have looked at various other questions regarding the FW cable, however I don't believe i have such a cabel. Then the Hard Drive test freezes up and I can hear a ticking noise coming from the drive but it doesnt seem to be spinning. Alongside these test issues, any computer cannot see the Ipod when plugged in (including itunes). Therefore some tests for the USB drive cannot be completed. I do not recall dropping it badly, though I have dropped it previously. Does all this mean there is damage to the drive? Should I instead take it to an apple store?
    Many Thanks

    The stats look fine. Try the DFU Restore method shown in Corrupt iPod classic. It may pay to disable any anti-virus software and use the staged transfer method to reload data, assuming you get that far.
    tt2

  • Blocking downloads to hard drive, but not flash drives

    Blocking downloads to hard drive, but not flash drives
    A nonprofit has asked me to configure new Windows 7 computers so that all content is BLOCKED from the hard drive, but any downloads may be downloaded to the individual's flash drive.
    The nonprofit allows individuals to play games, check e-mails, but we have a problem with them trying to upgrade Firefox, Google, etc.
    They want all configuration to the DEFAULT STATUS after a person log off the computer....no upgrades to any programs!
    I will occasionally upgrade programs once a month or so, as the volunteer administrator.
    They have changed the controls from Windows ME and XP, when I was a computer programmer and installer (I also worked during Windows 3.11, 95 and 98/98 SE versions as well)...
    Anyone help me, please?

    1. You can change security with cacls function. However if you do it in wrong way, you can cut the branch you are sitting on:
    http://technet.microsoft.com/en-us/library/bb490872.aspx
    2. If you are working in Active Directory, consider Group Policy
    3. Consider third pty software for granular access control (DeviceLock,...)
    4. There is nearly nothing that you can transfer from previous technologies. (Even nice
    steady state in Windows XP has no continuation. Consider
    kiosk mode in Windows 8.1)
    M.

  • I want to disconnect my hard drive from my iMac, if I right click on either of my drives nothing comes up, if I try to move them to trash, one goes in the bin but the other will not, how do I get rid of that one please?

    I have two hard drives for my iMac, I cannot right click on either icon to 'safely disconnect' either drive, but I can send one to trash.  The other however will not go to trash so how do I disconnect this one please?

    Launch the Console application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
    Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
    View ▹ Show Log List
    from the menu bar.
    Click the Clear Display icon in the toolbar. Then try the action that you're having trouble with again. Select any messages that appear in the Console window. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message (command-V).
    When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
    Please do not indiscriminately dump thousands of lines from the log into this discussion.
    Important: Some private information, such as your name, may appear in the log. Anonymize before posting.

  • How do I set the HELP menu to use Indesign's local HELP files on the hard drive and not the web?

    How do I set the HELP menu to use Indesign's local HELP files on the hard drive and not the web?
    CS 5.0 launches the internet browser.  > TO SLOW I DONT WANT THIS.
    CS 3.0 uses the local help files > I WANT THIS FOR 5.0.

    You're not speaking to the right forum for your request. Help is a Suite-wide feature and here is the forum where the Help application is discussed, and where the proper Adobe people hang out:
    Community Help Application

  • How come my hard drive is not showing up on the desktop?

    How come my hard drive is not showing up on the desktop?

    Those are preferences you speify from INSIDE The Finder:
    Finder > Preferences:

  • My external hard drive is not recognised on my mac book pro

    my external hard drive is not recognised on my mac book pro

    Hello all -
    similar situation.  Unplugged external hard drive and all to take the laptop on a trip.  On return, I plugged everything back in and keep getting this message:
    Time Machine couldn’t complete the backup to “Iomega_Ext_Drive”.
    Files can’t be copied onto the backup disk because it appears to be read-only.
    You may need to repair or reformat the disk using Disk Utility. If the disk can’t be repaired, you must use a different disk for backups. Open Time Machine preferences to select a different backup disk.
    open time machine preferences.   -
    I tried this and tried "repair" but that didn't work and I still get this message.  Any advice?  thanks

  • My external hard drive is not recognized by my computer.

    My external hard drive is not recognized by my computer. I used it earlier and it was fine however my computer froze and I unplugged my hard drive without properly ejecting it. Now when I plug it in nothing pops up. I've tried on three different computers and no luck. I hope this is fixable! Please help.

    Care to share which OS you are using?
    Repair permissions & restart your computer.
    Zap the PRAM

  • My internal hard drive is not recognized by the leopard installer disk

    i just got my leopard delivered this morning, and have just put it in, every thing is going well, until it comes to the screen where you select the hard drive you want to install leopard on, and my internal hard drive does not show up, however other drives do (like my external hard drives and usb sticks).
    really hope someone can help! thanks

    I am having the same problem with my MBP with Leopard. I get a flashing question mark on startup, and have repaired/permissions and my startup disk doesn't show up. I reset PRAM, and then ran permissions again to no avail. If it really is Spotlight just indexing, Apple should tell us that in their technical documents. If anyone has any other solutions, that would be appreciated.

  • New hard drive is not recognized by my MacBook Pro.

    New hard drive is not recognized by my MacBook Pro. The supplier says I need to update my BIOS. True? How do I do that?
    Hard drive: NN2-72-500-SSE Seagate Momentus 7200.4 (ST9500423AS) 500GB Laptop Hard Drive
    Mac OS: Mac OS X Lion 10.7.5

    I went through a similar issue with a Seagate Momentus 750GB HDD/8GB SSD with my late-2011 MBP.  No matter what I tried, the machine would not recognize the drive.
    To test it, I installed the drive in an old ThinkPad, and it worked fine.  Then I tried installing it in my PS3, and the drive worked fine there, too.  It was only the MBP which had issues.
    I don't *think* Macs have a BIOS to update.  But I know my MBP has issues with certain HDD's (including another external which works fine on other Macs and all Windows machines).
    You might be able to find my thread by searching under my username, perhaps something in there will offer a tip.  Otherwise, you might have to go the same route I did: install a WD Scorpio Black instead.  Or upgrade to an SSD.
    Good luck to you-

  • External Hard Drive does not show up in Finder

    My external hard drive is not showing up in Finder.
    It shows up in Disc Utility, but I do not have access to it. I have tried the following:
    command-shift c, nothing happens
    confirmed in Preferences/General that external hard drive was checked
    tried another cable
    tried another port on the back of the external drive
    tried to connect through the USB port
    re-started, etc.

    zone-5 wrote:
    I have same problem after installing OS 10.5.8. Disk utility sees the hard drive, the computer does not. Disk utility says invalid node structure. Volume check failed. Filesystem verify or repair failed.
    That means the directory is corrupt. If you have a heavy-duty 3rd-party disk repair app, such as +Disk Warrior,+ it may be able to fix it. Otherwise, your only option is to erase and reformat the disk. They're not cheap -- Disk Warrior is about $100. And for Leopard, you need version 4.1.1 or 4.2.
    I have not been able to figure out how to start a new topic here, but did find this discussion, which fits me fairly close.
    Just above the list of topics, on the left, is a +Post New Topic+ option.

  • External Hard Drive is Not Showing Up on Desk top?

    My external hard drive is not showing up on my desk top any more. When I tried to reconnect it I get the follow message.
    You have inserted a disk containing no volumes that Mac OS X can read. To use the unreadable volumes, click Initialize.
    Help what should I do? I have 50 GB of music on it and it's never had this problem before.
    Thanks
    Jeremy

    Norton has a bad reputation because they have not kept up with changes in the Mac file structure. Norton version 8 is the one you should be using, if you choose to use it. Earlier versions will likely damage your directory, possibly beyond repair by other utilities.
    Any time you use any Disk Repair Utility, it is somewhat of a crap shoot. It may or may not be able to make the repair, and you may or may not lose a few to very many files in the process. The program best respected in this arena is Disk Warrior. If you choose to buy it, pay very close attention to which version you are buying, as the latest version CD (intended to boot 10.3 or 10.4) may not boot on your Mac.

Maybe you are looking for

  • Drive Mapping problem in Windows 7 Professional

    We have Windows 7 Professional 32 & 64 bit installed on clients and Windows server 208 R2 Domain.  Since a long time I am facing problem in mapping drives on clients. If I map from User Account under Active Directory, it shows the mapped drive, but i

  • Add checkmark to system menu item

    Hello, My aim is to add a menu item to a windows system menu to toggle a stay on top feature. I found a nice piece of code on stack overflow to accomplish this: Link to stackoverflow code Here is the result in my program: I've modified the code to ke

  • Alert Log Content

    Hello!!! I want to see the alert log content for a specific date. But whenever I select a date window (date from.... date until) using the calendar utility there is none to be displayed!!!! Without search criteria the utility displays the last 10000

  • How to install system 6

    I have a macintosh classic. I have got the floppy disks for system 6.0.8 how do I install it onto my macintosh?

  • How do i install and boot to DOS in NTFS format?

    Hi every body. I have a PC setup winxp on the first partition,formatted NTFS,i setup DOS 7 on the next partition formatted FAT32,but i dont know how to add this partition to the boot choice so that when the PC boot up,there are 2 choices for me: 1.Wi