Hard drive issues; how to run hardware test

A couple of weeks ago my hard drive experienced what I would call "minor crashes". The computer booted up to the grey box with the question mark, and would do nothing more. The hard drive also made unpleasant noises. I think I got it back by resetting PRAM, but it happened a second time, and then a PRAM reset again got it back. Needless to say, I'm nervous about this drive.
I have Apple Care until January '09 (this is an '06 Intel machine) and figure I should try to move on figuring out what's up ASAP (both because I don't want a drive failure, and because I only have a few more months of Care).
I'm guessing that I should run the extended hardware test, but I can't seem to get it going using the Leopard disk I used to upgrade the OS. Do I need the original install disks (which I can't find, of course!)? What else can I do to determine if I have an issue that calls for hard drive replacement? If I need a new hard drive (it now seems small at 250gb anyhow), will I be able to do it myself (assuming Apple Care won't take care of it)?
Any insights welcome. Thanks!

Give it a try, if not you'll need to dig up your Disk 1!
+Some Intel-based Macs ship with Apple Hardware Test and Mac OS X 10.4.x preinstalled on the hard drive. If an Erase and Install installation of Mac OS X 10.5 Leopard is performed using a retail Leopard installation disc, Apple Hardware Test will be erased and not reinstalled on these Macs.+
+If you're in this situation and need to use Apple Hardware Test, simply start from the DVD that came with your computer (not the Leopard installation disc) while holding the "D" key. Apple Hardware Test will run from the DVD.+
http://docs.info.apple.com/article.html?artnum=306568

Similar Messages

  • Hard drive issues...running out of ideas...opinions?

    Hello everyone!
    Let me start by saying that I love all of my Apple products. I've been able to use an iPod mini, another iPod, an iPhone, a Powerbook G4 and a MacBook with no daily or otherwise recurring issue; however, the reason I now have a MacBook is because the Powerbook G4's hard drive died. Sad, but after 3 1/2 years of problem-free use in college...I could justify the upgrade.
    I purchased the MacBook from my university at a nice discount back in March of this year (this was right after the newest batch was released). I was comforted by the fact that I'd more than likely have another 3-4 years before a replacement would be needed. Now, I'm not so sure...
    One day last week, a tab that was opened in Safari froze up, and a song playing in iTunes began to hang. I attempted a force quit of both, but with no luck. Eventually I had no other option but to shut the computer down. Afterwards, I began getting the infamous flashing question mark upon booting back up. I realized that I'd probably had some damaged files as a result of the forced shut down, so I began working with Disk Utility/First Aid to correct the problem. Luckily, I had no important files or programs to worry about, so I went for the Erase option and hoped I could just re-install the OS.
    Unfortunately it was not that easy. Now my hard drive is not showing up as Verified under the S.M.A.R.T. status, and the volume "disk1s2" will not mount. I tried everything I could find on these boards, still with no luck. So, I went for Disk Warrior today and crossed my fingers. When the menu finally loaded, there were 2 options in the drop down menu: the disk warrior cd, and an Unknown Drive. When I chose the latter, this is what I was met with:
    Directory cannot be rebuilt due to disk hardware failure (-36,2268).
    I'm almost convinced that I need a new hard drive. However, when I run the Apple Hardware Test, everything checks out fine. I ran it twice. Also, when I run a test on the hardware in Disk Warrior, I get this message:
    This hard drive's built-in SMART diagnostics indicate the drive is functioning normally.
    Now, with my old Powerbook G4, the hard drive doesn't even show up in Disk Utility. That I can understand. It needs to be replaced. But with this MacBook, all the tests indicate the hard drive is fine. The only blatent message about hardware failure I get is when I try rebuilding the directory with Disk Warrior. I know I'm probably just in denial, but when my computer is only 5 months old...I think I have the right.
    So, what is your opinion? New hard drive for the 5 month old MacBook (grrr)? Or is there still hope left?

    SMART diagnostics are by no means all-encompassing, so it's quite possible for a drive to pass SMART diagnostics but still be defective. My advice at this point would be to boot from the Installer, go to Disk Utility, and see if you can erase, or if that doesn't work re-partition (normally you'll choose to create a single partition) the drive. A badly corrupted disk catalog might not be reparable, but reformatting may work.
    If that also fails, then the probability of the drive being defective is quite high and replacing it will probably be necessary. The tiny drives used in laptops are by nature of their very small components more prone to failure than are other drives, though as capacity and performance rise, even desktop drives are becoming more prone to breaking.
    Hope this helps.

  • Can not run hardware test on nMP

    I have Mac Pro late 2013, 6 cores, 16 Gb RAM, Yosemite. I have followed Apple instructions how to run hardware test. Both using D and Alt D at startup. Unplugged devices, plugged devices. The only thing I see is a row of languages and option to shut down or restart with black background I check English and hit return. After that nothing happens. Is there somone who could explain ?

    Using Apple Diagnostics
    Using Apple Diagnostics - Apple Support
    I take it you are using a wired keyboard and you are not seeing the display:

  • My 2006 iMac running Snow Leopard won't boot even after erasing and re-installing Snow Leopard (via my MacBookPro), either from the HD or DVD drive.  Can't get it to run Hardware Test.  Disk Utility says disk OK - files are there. What can I do?

    My 2006 iMac running Snow Leopard won't boot even after erasing and re-installing Snow Leopard.   I erased and re-installed by putting the iMac in Target Disk mode and usin my MacBookPro as the host.  But after numerous attempts I still can't get it to boot either from the HD or DVD drive. I just get the white screen after the wheel stops spinning.  I can't get it to run Hardware Test - just get the white screen.  If I use Disk Utility via my MBP it says the disk appears OK. All the Snow Leopad files appear to have been installed. What can I do?

    Hi-NRG Bwoy wrote:
    I erased and re-installed by putting the iMac in Target Disk mode and using my MacBookPro as the host.
    Reet the SMC and the PRAM
     Cheat sheet to help diagnose and fix your Mac
    Perhaps you installed the wrong version OS X onto the iMac, you can't use the disk from another Mac.
    clean the disk.
    If it's not working then use this method to create a bootable 10.6 USB from the iMac machine specific 10.6 disk or the 10.6.3 retail disk on your other Mac, use it to boot the iMac with.
    http://www.maciverse.com/install-os-x-snow-leopard-from-usb-flash-drive.html
    How to erase and install Snow Leopard 10.6

  • HT4527 How can I relocate my music so it lives outside my computer in a hard drive? I'm running out of hard drive space.

    How can I relocate my music so it lives outside my computer in a hard drive? I'm running out of hard drive space.

    The referenced article does not address the issue of just moving the music files outside my iMac, then still use my iMac and iTunes to manipulate those files without them adding bulk memory space to my iMac.  Would like to have the link or alias, or path fully described so that I may keep adding more music.  Plus one more thing, I would like to be guided as to how to back all of this music onto my capsule via time machine.

  • Sometimes my computer takes too long to connect to new website. I am running a pretty powerful work program at same time, what is the best solution? Upgrading speed from cable network, is it a hard drive issue? do I need to "clean out" the computer?

    Many times my computer takes too long to connect to new website. I have wireless internet (time capsule) and I am running a pretty powerful real time financial work program at same time, what is the best solution? Upgrading speed from cable network? is it a hard drive issue? do I only need to "clean out" the computer? Or all of the above...not to computer saavy.  It is a Macbook Pro  osx 10.6.8 (late 2010).

    Almost certainly none of the above!  Try each of the following in this order:
    Select 'Reset Safari' from the Safari menu.
    Close down Safari;  move <home>/Library/Caches/com.apple.Safari/Cache.db to the trash; restart Safari.
    Change the DNS servers in your network settings to use the OpenDNS servers: 208.67.222.222 and 208.67.220.220
    Turn off DNS pre-fetching by entering the following command in Terminal and restarting Safari:
              defaults write com.apple.safari WebKitDNSPrefetchingEnabled -boolean false

  • How do I find my tab history? I had hard drive issues and when I launched my browser after getting it back their was no "restore session" option. I know a tab history is kept, just don't remember where or how to exercise it. Thanks

    Question
    How do I find my tab history? I had hard drive issues and when I launched my browser after getting it back their was no "restore session" option. I know a tab history is kept, just don't remember where or how to exercise it. Thanks

    Firefox 4 saves the previous session automatically, so there is no longer need for the dialog asking if you want to save the current session.<br />
    Use "File > Exit" or "Firefox > Exit" if you want to restore multiple windows.<br />
    You can use "Firefox > History > Restore Previous Session" to get the previous session at any time.<br />
    There is also a "Restore Previous Session" button on the default <b>about:home</b> Home page.
    Another possibility is to use:
    * [http://kb.mozillazine.org/Menu_differences Firefox (Tools) > Options] > General > Startup: "When Firefox Starts": "Show my windows and tabs from last time"

  • I have a pc running vista and the hard drive crashed how can i transfer my songs from Ipod nano 5th gen to my new hard drive and into itunes

    I have a pc running vista and the hard drive crashed how can i transfer my songs from Ipod nano 5th gen to my new hard drive and into itunes

    Right click on your device in the device list and choose "transfer purchses" to copy all music bought in iTunes to your new iTunes library.
    For all other media you'll have to use 3rd party software, examples are mentioned in this thread:
    http://discussions.apple.com/thread.jspa?threadID=2013615&tstart=0

  • Switching iTunes (older version) from an old latptop with mechanical issues to iTunes on a new computer.  The hard drive, issue free, was placed in external drive enclosure.  How do I recover iTunes?

    I'm trying to moves iTunes (older version) from an old latptop with mechanical issues (non working screen, keyboard, and battery) to iTunes on a new computer.  The hard drive, issue free, was placed in external drive enclosure.  This was a cost effective way instead of dumping lots of money in an outdated old laptop while I can invest it into a new laptop.  How do I recover iTunes?
    I'm switching from a 3G phone to a blank 4GS in the process.  I would like to have everything that was on my 3G phone and iTunes on my new phone and computer.
    Thanks

    iTunes: How to move [or copy] your music [library] to a new computer [or another drive] - http://support.apple.com/kb/HT4527
    Quick answer if you use iTunes' default preferences settings:  Copy the entire iTunes folder (and in doing so all its subfolders and files) intact to the other drive.  Open iTunes and immediately hold down the Option (alt) key (shift on Windows), then guide it to the new location of the library.
    Windows users see tip at: https://discussions.apple.com/message/18879381

  • I have a new Windows tablet computer with limited hard drive space, and cannot transfer my itunes library to the hard drive. Can I run t media from an external hard drive? If so, how do I transfer my files?

    I have a new Windows tablet computer with limited hard drive space (32 GB), and cannot transfer my itunes library to the hard drive. Can I run itunes from an external hard drive? I have tried to follow some of the directions on this site, but am having no success. Thanks.

    iTunes will run fine with the media on an external drive.
    However, I suggest that a tablet computer with a tiny hard drive is not ideal as the primary computer for managing an iTunes library, even a small one. If you have another machine, perhaps a big, boxy, inexpensive old desktop with a decent amount of storage, that might be a better choice.
    http://support.apple.com/kb/HT1364

  • Hard Drive Issue / Warranty

    So, I'm having some trouble with my iMac. Seeing as I've only had it for 6 months, I assume it should still be under warranty. However even if it's not, I want to pay to get it fixed as it's driving me insane.
    My iMac's hard drive has recently been running really loudly. It varies from doing so constantly, to only when first turned on, and launching applications.
    What I've tried...
    -- Reformat/install OSX
    -- Running Apple's Hardware Test
    -- Resetting SMC
    So, my question is, would this be something Apple's warranty would cover? I've never had to deal with any Apple support before, so I'm new to this deal.
    Thanks
    Tyler

    Hi Tyler,
    Sorry to hear you have this issue. I had Hard Drive noise on my new iMac since day one I got it and it is very annoying, so I wend back to Apple store and they where nice enough to replace the unit.
    Now since your unit is 6 monts old it is still under apple warranty because by default you have 1 year from manufacturer and additional 2 on top of that if you buy Apple Care. (Assuming if you got it new and not used), so the best way to check your warranty status is you type in your serial # on the following link provided here:
    https://selfsolve.apple.com/GetWarranty.do
    So if the drive is laud I will defiantly recommend you to make appointment and take the unit in for servicing. Spending so much money on a computer and to put up with hard drive noise like its 10 years old is simply unacceptable!
    Let me know how it goes,
    Goran

  • Incredibly slow MacBook, Internal Hard Drive issues...

    Good morning everybody! I'm apologize if this post is extremely wordy...
    I am extremely baffled by a particular issue with a MacBook 2.0GHz C2D which belongs to a friend of mine. The warranty is expired.
    _Brief history:_
    Several months ago, this MacBook could not find a bootable volume. The drive would not mount when booting from an external FireWire hard drive. It would not mount when the MacBook was put in Target Disk Mode and connected to another Mac. When booting from an external USB hard drive or with my MacBook Pro connected to the MacBook via Target Disk Mode, the MacBook booted up quickly. I came to the conclusion that the internal hard drive must have failed and needed to be replaced. Ultimately, the data was not recoverable from this drive.
    I then proceeded to swap out the defective Apple OEM Seagate hard drive with a known working Apple OEM Fujitsu hard drive. When booting from the Leopard Install DVD, the MacBook would boot incredibly slow, but would finally reach the Installer Language screen. When proceeding to install Leopard, the drive would take a very long time to have data written to it, and ultimately the install failed. I removed the new hard drive from the MacBook and placed it in an external USB enclosure, attached it to the MacBook and booted from the Leopard Install DVD. Leopard would install successfully. I removed the hard drive from the enclosure and reinstalled it the MacBook. When booting from the freshly installed OS, the MacBook would take a very long time to boot. The MacBook is extremely slow!!!
    I checked the Activity Monitor to ensure CPU & System Memory Usage was not going crazy. All Processes where normal with adequate CPU & Memory headroom.
    I took the MacBook apart thinking that the SATA Controller Cable might be loose. No, it was firmly in place. I reassembled the MacBook and booted it up again. Still incredibly slow!
    Finally, after several reboot attempts, the MacBook would book up quickly and operation was perfect. I applied all updates and continued testing the MacBook with great success. Gave my friend his MacBook back and he was grateful.
    _Now for the kicker..._
    My friend brought me his MacBook a week ago complaining that the MacBook was operating extremely slow (much like when I was initially testing it before). I verified the MacBook was slow when I tried using it. I tried several reboots and then it would get stuck on the gray Apple with spinning gear.
    I tried booting into Single User Mode, but it gets stuck on "Waiting for root device"
    I put the MacBook in Target Disk Mode and connected it to my G5 2.0GHz Dual Core. The hard drive would mount quickly on the G5 and I used Disk Utility to create a Restore Image. The disk operation would perform normally and the image would be created successfully.
    I then partitioned the MacBook's hard drive when connected to the G5, ejected and proceeded to attempt OS reinstall. No dice! The hard drive is not even detected by the Disk Utility on the Leopard Install DVD.
    Finally after several reattempts, the hard drive is recognized, but is extremely slow when trying to reinstall...and again, ultimately install fails. Using Disk Utility from Leopard Install DVD, the hard drive fails to unmount when I try formatting.
    I don't have Apple Hardware Test disc for the MacBook or Apple Service Diagnostics disc for this model. Running TechTool Pro shows hardware to be okay, disk controller onboard the Fujitsu drive is okay, but running SMART & Surface Scan takes a long, long time (which I'm certain will ultimately error out). Running Drive Genius takes a long, long time as well.
    Conclusion:
    I think the SATA Controller Cable is defective. I can't think of anything else that would cause disk errors or performance issues like this. Your input is truly appreciated!

    Even though no one responded to my post, I thought I'd share the resolution with the entire Apple community. I hope this information will be helpful to some of you with MacBooks or MacBook Pros that may be running painfully slow or may be exhibiting hard drive issues because your machine won't recognize the boot drive or fails to properly boot on a perfectly healthy S.M.A.R.T. verified hard drive. It just might be the hard drive connector/cable. Here it goes...
    I visited my local Apple Retail Store and asked a "Genius" at the Genius Bar about this issue and told him my thoughts about a possible failed hard drive connector/cable. First, he didn't even know what a hard drive connector was! Then, he arrogantly stated that he never heard of such a thing and that these cables never fail. Finally, he blatantly dispelled this as a possibility.
    On the contrary with my experience, I have had many failed PATA controller cables that required replacement when supporting the desktop PC's at work. I have personally owned and supported many Apple manufactured laptops and desktops and have never encountered this issue on a Mac...until this MacBook!
    So, after looking at the Service Manual for the MacBook, I went over to my local Apple Authorized Service Provider and purchased the Hard Drive Connector Apple Part #922-7579. I replaced the original cable, reassembled and proceeded to boot the MacBook with the Leopard DVD installer. The Fujitsu drive was immediately recognized and was able to be formatted and Leopard installed without incident. The MacBook boots off the internal hard drive as normal again and works nice and fast again.
    Thank you all for your time!
    :D

  • Hard drive failure - how to boot from replacement?

    the hard drive in my Mac Mini has become unbootable - I've gone through all the options suggested in Apple support docs including trying to boot from install disk.  I don't get a startup screen to select where to boot from, jus the gray spinning gear.  I fear the drive is dead.  It was preceeded by strange behavior of permissions.  Most of what I read is advice on installing a replacement drive but copying info from the old.  How does one create a new bootable drive?  I'm thinking of replacing the hard drive with SSD. Thanks Rich

    AHT (apple-hardware-test), at least on 10.9-era macs, seems to do *no* tests at all of the hard-driver or SSD. You have to use other testing methods, to run SMART long and short self-tests of SSD and HD as detailed below, and google is your friend.
    === Details ===
    For AHT: Power-off. Hold-down "option" and "d" keys, and keep holding them down while you power on. After a minute or two it will boot Apple Hardware Test from internet, at least for 10.9-era hardware. Use a network cable if you can. With known-bad or missing hard-drives, the AHT still says "no problems found".
    For example, I have had 3 new macs in 3 weeks that all have hard-drives that always report "read-failure" to SMART tests. The Apple Hardware Test apparently does NOT do any testing of hard-drive(s) at all. Not only did say "No problems found" with the bad-drive(s), if you remove the hard-drive completely it still reports "No problems found"!  You may want to run some long SMART tests on hard-drive(s) weekly, even if they are brand new... the 3 that failed on me were different brands from different stores: all reported "read-failure" in around 30 hours. So I conclude that consumer-drives have very poor quality... in effect, the end-user is doing the QA tests by using the drive as apparently little QA goes on at factory. And/or the shipping folks are really throwing those things around hard.
    To run SMART tests on a mac, you can "brew install smartmontools" and "brew install gsmartcontrol". Or if you are not a command-line person, you can get a 14-day trial of Drive-DX disk-health tester (looks like ja smartctl-gui-wrapper) from:
    http://binaryfruit.com/drivedx They also have a links to a SMART-SAT driver that lets you run smart tests on almost any newer usb-enclosed HD or SSD. Nice
    If mac won't boot at all from disk, you can rescue/recover by booting from usb or live-cd such as gparted-live-cd/usb  (which boots most intel macs as it has the guid bootability):
    http://www.ehow.com/how_8505863_boot-gparted-cd-mac.html
    PartedMagic is really nice and boots every intel mac I've tried it on, but is no longer free. Right on desktop is "Disk Health" (which runs gsmartcontrol). Also has ddrescue, testdisk, photorec, etc. Sees HFS+ just fine.

  • Permissions Issue, Colour Wheel, Hard Drive Issue??

    Hi!
    I have had issues with my mid 2009 MBP recently and I'm wondering what the best way to fix them would be. 
    First off, I have some major permissions issues with my accounts.  I am using 3 different users regualrly on the same machine and needed to access files from the home folder so I changed them a long time ago, and am not sure how to fix that.  I have repaired the permissions countless times in the disk utility and it seems like there's always loads more to do each time.  When I varify the disk, it says its all okay.
    Secondly, I have had the machine freeze on me several times while doing very little on it.  This happened awhile ago, and thought that it was just the permisions thing and so I did that again, and it started working better, for awhile.  It would go a few days or weeks before doing the same thing, sometimes not even getting past the apple logo on startup before freezing.  This makes me think it may be a hard drive issue???????
    This morning, I tried dozens of times to boot, with no success at all.....  until about the 25th time when it miraculasly booted.  I have run permissions repair a few more times and it seems to be working okay at the moment, but the problem seems to be happening more often over time. 
    To complicate matters, I am traveling at the moment and will not be home for several months.  I purchased an external harddrive last night and was able to successfully back up my data. 
    Question 1: Is it the permissions that are causing these problems, or is it related to something else.  The computer seems to work fine when its working, and then once in awhile, decides its not going to do anything. 
    Question 2:  Would upgrading to Lion (currently running 10.6.8) fix the permissions issues or just carry them forward?  I would like to consolidate the 3 users into one, if that would solve it.  Does the migration utility preserve permissions or does it give you a brand new start?
    Question 3:  If neither solving the permissions or the OS upgrade would fix the problem and it does need a new harddrive, is it possible to buy one and install it myself?  I do not have apple care left on this machine and am on a very tight budget.  I am used to taking things apart and all that as part of my job and it seems simple enough.  Where can you buy a replacement?? 
    Hopefully someone out there will be able to help me out on this one. 
    Cheers!!!!
    Brian

    bgroot422 wrote:
    First off, I have some major permissions issues with my accounts.  I am using 3 different users regularly on the same machine and needed to access files from the home folder so I changed them a long time ago, and am not sure how to fix that.  I have repaired the permissions countless times in the disk utility and it seems like there's always loads more to do each time.  When I verify the disk, it says its all okay.
    Disk Utility permissions are separate from User account permissions.
    This link is how to fix them
    https://discussions.apple.com/thread/2181549?start=0&tstart=0
    Disk Utility will always show something to be needing repair, but that's ok
    Apple supoort doc.
    https://support.apple.com/kb/TS1448?locale=da_DK
    Verify Disk is good, that's a good thing.
    To complicate matters, I am traveling at the moment and will not be home for several months.  I purchased an external hard drive last night and was able to successfully back up my data. 
    Your data is backed up, hopefully not with TimeMachine alone, but if you did, then get another drive and backup data manually to that as well. If the TM drive gets messed up, it's a pain to get your data off of it.
    Question 1: Is it the permissions that are causing these problems, or is it related to something else.  The computer seems to work fine when its working, and then once in awhile, decides its not going to do anything.
    Well you could call Apple for replacement 10.6.x disks, and just reinstall 10.6 and bundled programs, but this can kick out kext files out of the /System/Library/Extensions folder installed by some third party software.
    This method fixes OS X, but doesn't touch your files or most programs.
    Nor will this method fix your Users accounts if the issue is in there.
    A creation of a new user, then deletion of the others, return files from backup (set permissions) will fix User folder issues if the above user permissions fix doesn't work.
    (Of course you could wipe the drive from the 10.6 disk, but you have to install all software again)
    Would upgrading to Lion (currently running 10.6.8) fix the permissions issues or just carry them forward?
    No, you don't want to install Lion, it won't fix those issues in User folders, not only that Lion has it's own issues and doesn't work with a lot of older software etc.   No use clusterfscking a already bad situtation when it's seems it's only localized to the User accounts.
    I would like to consolidate the 3 users into one, if that would solve it.
    Yes that could very nicely and tidy up things in the process.
    What you do is transfer all files to one regular powered storage hard drive.
    (Don't use/disconnect the TimeMachine drive for this as it preserves the users seperated and you don't want all those users back restoring  with Migration Assistant)
    Create the New User on the machine as Admin, log into it and delete all the other Users, transfer all your files back from the regular storage drive, changing all the permissions to yourself before placing them into their respective folders as they will have three different permissions.
    Notes:
    If you have a extensive iTunes playlists on one User (say #1), then create the new user with that same name (will require some work, create User 4, delete Users 1-3, reboot, create User 1, delete User 4) then transfer your iTunes folder to Music of that User 1 (same name as before). This will preserve the pathnames of your song locations and your playlists will be preserved.
    (before you ask, no you can't combine playlists)
    Also if you have photo's in iPhoto Library, you have to right click on it and "show package contents" inside is a folder called Originals, copy them out and import into the iPhoto of the User #1.
    Does the migration utility preserve permissions or does it give you a brand new start?
    Yes it preserves user permissions, no it doesn't give you a brand new start. Only a fresh install, creation of new users and then just transferring of files does that.
    Nothing about TimeMachine or Migration Assistant gives one a "fresh start", it's if hosed, so is your restore.
    If you want that sort of pristine protection, you need to clone your ideal boot partition/drive using Carbon Copy Cloner (free/donationware) occasionally as a hold the option key bootable drive, then you can erase and reverse clone the pristine saved clone.
    One can also update the clone on occasion, this way keeping the clone pristine.
    I maintain 3 clones time dated, even have my boot drive partitioned 50/50 and auto-cloned, this way I have two boot partitions on the road and two externals at home.
    I never use TimeMachine, it's not bootable (well it is on 10.7.2 only to restore though)

  • Can I run hardware test and repair a disk with Leopard using 10.3 DVD

    Hi,
    I'm trying to decide whether to partition and clone Leopard to my external or partition and install Tiger on the external.
    My iMac came with 10.3.6 install and hardware test DVD's and they (Comp USA) gave me a Tiger drop-in DVD. I upgraded to Leopard through a family pack DVD (when I told my friend I would by one of the install's I thought I would get a DVD, but you only get an install license, oh well). By the way, Leopard runs great in my rev A iMac G5.
    I'm trying to figure out which os to use on the external as a safe-boot incase something happens. If I clone Leopard onto a partition for backup/boot, can I still use the Disc Repair (not permissions) and Hardware Test from the 10.3 or Tiger DVD's to maintain that permission should something bad happen? The way I see it, i'll be able to repair permissions on both the main and external drives using Leopard's disc utility, but I'm not sure if I can repair a Leopard disk or do Hardware Test on that disc using an earlier version of OSX install/Hardware Test DVD's.
    Will earlier versions of OSX repair a Leopard disk and be able run Hardware Test?
    Thanks for the help,
    LowBb
    Message was edited by: LowBb

    Yes, that seems to be the case, but I didn't do good enough research when he asked if I wanted a license for Leopard. For some reason, I had it in my mind that a Family pack came with multi DVD's for people. Maybe that's why he sold me a license so cheap. I thought I was getting a bargin, you get what you pay for.
    So, I have the hardware test DVD's that came with the iMac and the Tiger drop-in is just an upgrade with no Hardware Test, you are correct.
    But: (let me make sure I have this right) I should not use the 10.3 DVD's or the Tiger drop-in to repair a disc (not permissions) on a hard drive running Leopard. Is this what you are saying? I kind of thought this would be the case. If it is, I'm going to install MY stuff that I have the DVD's for on the external as an emergency boot disc.

Maybe you are looking for

  • Problem with recognition raw files from nikon d600

    hello everyone, i hope someone can answer my question. using cs5 with camera raw . camera raw is not able to open my nef files from my new nikon d600 . what can i do to update the plugin?? from the menu help updates in cs5 it tells me that all soft. 

  • ITunes 8 Upgrade Results in 5002 unknown Error when trying to update Apps

    iTunes 8 reports that I have apps with updates available. When trying to update them I get this error: We could not complete your iTunes Store Request. An unknown error occurred (5002). There was an error in the Itunes Store. Please try again later.

  • SRM Outline PO line not unique with ECC PO line

    Hi Experts, We are using SRM 7.01 Extended Classic scenario. We have requirement in BI reporting for Shopping Cart and Purchase Order Overview Report. There is 1 issue with Outline PO(PO created from external Requirement) in SRM. In SRM, it is create

  • Sp to sync two tables using linked servers

    Hello everybody I'm working in a SP and I got two tables in different servers, one is the main and the other is a copy but whit less columns, all I want is to run the SP every 5 min over the main table in order to validate if new records has been cre

  • Print JTable with multi line header

    I need to print a JTable with multi line header, I want to know if I can use the method jTable.print(int, MessajeFormat, MessageFormat) by manipulation of the MessageFormat. How I can manipulate it? Otherwise, How I can print this?