Hardle ever goes to the right spot when visting a html#page link

http://www.macintouch.com/readerreports/macbookpro/index.html#nov17
almost everyday i goto the macintouch.com web site, and click on the macbook pro report, it usually has a html#date link. the first time it goes right to top of the page instead of the #nov17 place holder. if i refresh, it goes to the nov17 spot everytime. why does this happen ?

Page works OK for me.
It may be you are initially accessing a cached page, which would reflect prior activity from a previous visit. Go to the Safari Menu and select "empty cache". Then try the site. See if that makes a difference.
Message was edited by: Hawaiian_Starman

Similar Messages

  • Ie 11 when opening another web page it goes to the right & is unreadable

    HP Pavilion 500-C60 with windows 8.1 installed when purchased. When using IE 11 and clicking on a news item to be able to read the entire item it opens on the right side when in full screen and is unreadable. Have to click on restore down to move it to the left then click on it again to Maximize [ full] screen. How to correct does one correct this peoblem

    Hi tofme,
    It sounds as if you are running Internet Explorer (IE) in tiled mode.
    You can change IE to always open in desktop mode as follows:
    Open "Control Panel' - "Internet Options" - select the "Programs tab" - then change settings per image below.
    Jaco
    ****I am not an HP employee****
    Please give a" Kudos, Thumbs Up" if advice received is relevant or" Accept as Solution" if your problem has been solved.
    HP Products:
    810-150se Desktop
    17t-j000 Notebook
    1380t Desktop
    560z Desktop
    Errare humanum est.

  • I don't know much about computers can anyone walk me through this ? How Do I Change The Software Update Server Address On A Client  ? what do I open and how do i put it in the right spot?

    I don't know much about computers can anyone walk me through this ? How Do I Change The Software Update Server Address On A Client  ? what do I open and how do i put it in the right spot?

    The simplest method is to run a defaults command on the client Macs (easily pushed via Apple Remote Desktop):
    defaults write com.apple.SoftwareUpdate CatalogURL 'HTTP_URL_FOR_CATALOG'
    for a user. If you run it via sudo it will set it for whenever you use softwareupdate as root.
    The HTTP_URL_FOR_CATALOG has been changed with Mac OS X 10.6.  If you use MCX it will automatically pick the new catalog – however if  doing it manually the following URLs need to be used for whichever  client version is in question:
    Mac OS X 10.4: http://mysus.example.com:8088/index.sucatalog
    Mac OS X 10.5: http://mysus.example.com:8088/index-leopard.merged-1.sucatalog.sucatalog
    Mac OS X 10.6: http://mysus.example.com:8088/index-leopard-snowleopard.merged-1.sucatalog
    Mac OS X 10.7: http://mysus.example.com:8088/index-lion-snowleopard-leopard.merged-1.sucatalog
    Mac OS X 10.8: index-mountainlion-lion-snowleopard-leopard.merged-1.sucatalog
    To double check this applied you can run the following command:
    /usr/libexec/PlistBuddy -c Print /Library/Preferences/com.apple.SoftwareUpdate.plist
    and /usr/libexec/PlistBuddy -c Print ~/Library/Preferences/com.apple.SoftwareUpdate.plist
    to see what settings are for the computer and user appropriately.
    If  this is working correctly when running Software Update (GUI) you should  see the server address appear in parenthesis in the title of the  window.
    MCX
    Another alternative is to use Workgroup  Manager to manage the preferences via MCX from your server. This can be  done for users, or for computers if they are bound to your Open Directory.
    If you are using 10.5 Server or newer: you can simply use the Software Update section under Preferences.
    Manually:
    Choose the accounts, computers, or groups to have the preference applied to.
    Click on Preferences, and then the Details tab
    Press the Add… button and navigate to /Library/Preferences/com.apple.SoftwareUpdate.plist
    Press Edit…
    Under Often, add a New Key and enter the name CatalogURL
    Make sure the type is string and then enter your SUS URL (eg. http://mysus.example.com:8088/index.sucatalog or if using 10.6: http://mysus.examle.com:8088/ – see above from the defaults section)
    Press  Apply Now, then Done. Once users/computers have refreshed their MCX  settings (usually the next login or restart) the new settings will take  over.
    If this is working correctly when running Software  Update (GUI) you should see the server address appear in parenthesis in  the title of the window.
    In order to have a system-wide configuration one has to run the following:
    sudo defaults write /Library/Preferences/com.apple.SoftwareUpdate CatalogURL "http://your.updates-server.lan:8088/index.sucatalog"
    In order to correctly work both on Leopard and Snow Leopard the right command to issue is:
    defaults write /Library/Preferences/com.apple.SoftwareUpdate CatalogURL "http://your.updates-server.lan:8088/index-leopard-snowleopard.merged-1.sucatalog"
    Happily used and tested on my network
    The DNS trick that Chealion points out is fantastic. I use it at our office, and every computer on our LAN  will automatically pull the updates from the local repository at high  speed without any configuration.
    Create the swscan.apple.com DNS zone on your internal DNS server, and have it resolve via an A record to your Mac
    Tags: automaticupdates mac clients macosx setting as default software update
    Category: Serverfault
    Share
    0
    0
    Google +
    0
    0
    0
    5
    You might also like:
    Can I Update My Jb 4s To 6.1.2 Without Restore? Tue. Jan 21st, 2014
    Iphone 4 Not Charging After Update To IOS6 
    IPad 2 Not Updating To IOS 5.1 
    How To Resolve The â€âunable To Install Update” Error For OTA IOS Updates? 
    What Is â€âSoftware Update” Doing When It Says â€âChecking For New Software”? 
    Advertisement
    Comment
    - See more at:  http://www.eonlinegratis.com/2013/how-do-i-change-the-software-update-server-add ress-on-a-client-mac-to-use-my-own-server/#sthash.YhHp5zWk.dpuf

  • Troubleshooting: Scroll bar goes to the right in LR2.3

    Not sure why this happens, but every so often - maybe once every couple days, I will be working in either the Library or Develop module and for no apparent reason, the scrollbar for the bottom filmstrip just starts moving on its own accord to the right until it gets to the end of the filmstrip. It keeps going to the right unless I close the program and start it back up again and then everything is fine again.
    Wondering why this occurs.
    Thanks

    kglad - that works perfectly.
    I was looking at the UIScroll component's properties, It
    never occurred to me to look at the TextField properties.
    Thanks.
    JL

  • Why does premiere elements 8 say I need the right 'codec' when trying to open hdd video?

    Why does premiere elements 8 say I need the right 'codec' when trying to open hdd video?  where can I find this codec?

    hey, I'm not sure if I've set it up for hard drive video.  When I
    try to import it says it's the wrong codec.  I had a similar problem with windows moviemaker.
    except the error message there (moviemaker) said 'too many methods firing from events'
      hmmm.  I don't know what it all means.  I have an hdd sony digital handycam.
    dcr-sr45 is the model.  any suggestions?

  • I deleted firefox because of malware; I want to reload it, windows or explorer blocks it before begins; I tried the forum, but when I click on a link I get spammed: I am using Trend Micro Titatanium, but it doesn't seem to be working, can you help me?

    I deleted firefox because of malware;I want to reload it but windows or explorer blocks it. I tried the forum but when I click on a link I get spammed. Can you help?

    You are not addressing Apple here. We are all just users like yourself
    lost/stolen                                     
    No app on the iOS device is required.                           
    - If you previously turned on FIndMyiPod/iPhone/iPad on the iOS device in Settings>iCloud and wifi is on and connected or cellular data is on and connected for, on a computer browser go to iCloud: Find My iPhone, sign in and go to FIndMyiPhone. If the iPod has been restored it will never show up or continue to show off-line.
    - You can also wipe/erase the iOS device and have the device play a sound via iCloud.
    iCloud: Erase your device
    iCloud: Use Lost Mode
    - If not shown, then you will have to use the old fashioned way, like if you lost a wallet or purse.
    - Change the passwords for all accounts used on the device and report to police and carrier if iPhone or cellular iPad
    - There is no way to prevent someone from restoring the erase (it erases it) using it unless you had iOS 7 or later on the device. With iOS 7 or later, one has to enter the Apple ID and password to restore the device.
    - Apple will do nothing without a court order                                               
    Reporting a lost or stolen Apple product                                              
    - iOS: How to find the serial number, IMEI, MEID, CDN, and ICCID number

  • "Operation is not valid due to the current state of the object" error when trying to create a link for a shared folder in OneDrive

    I'm trying to share a folder in OneDrive with another user in my organization, and create a link so that people outside of the company can see the folder. Whenever I try to create a link I get an error that says: "Couldn't create the link sorry something
    went wrong operation is not valid due to the current state of the object" How do I resolve this?

    Hi,
    Sorry for replying late and I noticed that you posted another thread in this forum:
    http://social.technet.microsoft.com/Forums/en-US/2b8c6f54-9c59-4b37-b28f-1d49a1b7913b/operation-is-not-valid-due-to-the-current-state-of-the-object-error-when-trying-to-create-a-link?forum=officeitpro
    I've replied and kindly refer to it to see if it is helpful.
    Regards,
    Melon Chen
    TechNet Community Support

  • How to know the rights of a user on a page ?

    Hi
    There's surely a PL/SQL procedure that returns the rights of a user on a page (none, display, manage content , etc ...) ?
    This procedure should be used to display or not the "modify" link, for instance.
    Which is it ? Does anyone know ?
    I want to display some additional informations only to people that can modifiy the current page.
    Regards
    A.

    Some of the procedures/functions in the public API wwsec_api might be useful to you.

  • Can i change the cursor icon when hover over an active link by another one ?

    Can i change the cursor icon when hover over an active link by another one ?

    i have multiple links,so is there a way to have the custom cusrsor work on all links in a page and not just one?......you can see here i have 3 links..but only the top one changes to the crosshair cursor when rolled over  http://prntscr.com/5oxkj6
    actually it seems its not working on multiple instances of the same button.
    nvm found out why,lol...it was because i ndidnt have an actual link associated with the other instances of the button....all good now:)

  • When I open a document , the document goes to the right of the screen and I cannot see it.

     I have HP Windows 7.   It happened when I initially purchased  computer in 2010 and now it happened again.  I tried to right click off the screen to drag it in but it doesn't work.
    It is doing this now when I download from an email and try to view the download and when I open a document in MS Word and Excel.

    This can happen if you have ever connected a second monitor,
    opened a document in that extended display,
    and then closed the document in that extended display...
    Later when you have only one monitor, that is, your main display, the document is still opening in that "ghost" monitor.
    I do not know if this is what you did, but if yes, then the fix may be as follows..
    Go back into your Display settings and set your monitor to display to just ONE (your main) display. 
    Your open documents should pull back into place in your main display area.
    Kind Regards,
    Dragon-Fur

  • Why do elements move when i place them and look at the preview the are not in the right spot

    I cant get elements logo's and photo's to stay in place the are in a good spot when i place them bud when i look at the preview the suddenly moved 60 or more pixels from there spot.

    And the url http://ushabhalla.businesscatalyst.com
    Hope you can help me .
    Kind regards Arno

  • Using Divs/Layers - am I going in the right direction?

    Decided to give divs a try and get away from tables cause
    everyone says I
    should :-)
    Teaching myself from scratch about them and just wanted
    guidance on how it
    is going so far.
    I am trying to construct my template and have created one
    test page.
    http://www.mmmcommentaries.com/test/index.htm
    I am creating the site by just setting up a div for each area
    - main body,
    menu, banner.
    Is this the right way to do it or is there a better way? I
    suppose I am
    still thinking like a tables user in that I am setting up a
    cell (div) for
    each item.

    If you remove this line -
    <?xml version="1.0" encoding="iso-8859-1"?>
    your page will render in Standards mode in IE, rather than
    quirks mode. You
    don't need that line currently, so it's safe to delete.
    Your concern about the menu is well placed. Horizontal menus
    always run the
    risk of breaking when the text is resized in the browser.
    Yours will too.
    But, to spread things out a bit, you need to manage the
    padding and the
    width of the div#nav ul li a rule.
    Murray --- ICQ 71997575
    Adobe Community Expert
    (If you *MUST* email me, don't LAUGH when you do so!)
    ==================
    http://www.dreamweavermx-templates.com
    - Template Triage!
    http://www.projectseven.com/go
    - DW FAQs, Tutorials & Resources
    http://www.dwfaq.com - DW FAQs,
    Tutorials & Resources
    http://www.macromedia.com/support/search/
    - Macromedia (MM) Technotes
    ==================
    "Koenig" <[email protected]> wrote in
    message
    news:e3rn3o$54h$[email protected]..
    > Thanks very much for those links - spent an interesting
    morning teaching
    > myself this (I think!)
    >
    > I am hoping you can help me with a small problem.
    >
    > I have a menu bar on it now - just as simple thing but I
    want to make the
    > text for the menu items bigger without making the items
    run onto two
    > lines.
    >
    > There seems to be plenty of space on the line for them
    to sit but I have
    > played around with the settings and forthe life of me
    can't work it out.
    >
    >
    http://www.mmmcommentaries.com/test/index.htm
    >
    > Thx
    > Trev.
    >
    >

  • Recovery discs: says not the right model when trying to install

    Hi I have a real problem.I have a 1330n Media center desktop. I never had to use the system recovery discs before. I bought this PC new from Circuit City when they were in business.      A little info.
    A few years ago HP sent me the full set of recovery discs after the courts made them supply owners with a physical set of discs and not the hard drive partition like they supplied. I never used these. I do have my system backed up with Retrospect and if I ever had an issue I always relied on that.
    I just got a trojan that hit everything even the recovery partition. I needed to format and go from scratch. I knew I had these recovery discs so I was not afraid to try different methods of recovery. I was told by the anti virus people AVG to install from a Win XP disc and format the hd and start there. The discs I have from HP do not work as AVG said so I went to my Retrospect back up restore cd. It brings up my restore shell but fails to show the external drive where my back up resides. I now have only one choice my HP recovery discs. I tried to use them and they say not the right model.
    What do I do now? I need to get this up so I can restore my retrospect backup.
    Any suggestions?

    Read the section "Error: These PC recovery discs do NOT support this PC model" in the troubleshooting recovery in Windows XP web page. Try these steps and/or verify everything is correct.
    Frank
    Frank
    {------------ Please click the "White Kudos" Thumbs Up to say THANKS for helping.
    Please click the "Accept As Solution" on my post, if my assistance has solved your issue. ------------V
    This is a user supported forum. I am a volunteer and I don't work for HP.
    HP 15t-j100 (on loan from HP)
    HP 13 Split x2 (on loan from HP)
    HP Slate8 Pro (on loan from HP)
    HP a1632x - Windows 7, 4GB RAM, AMD Radeon HD 6450
    HP p6130y - Windows 7, 8GB RAM, AMD Radeon HD 6450
    HP p6320y - Windows 7, 8GB RAM, NVIDIA GT 240
    HP p7-1026 - Windows 7, 6GB RAM, AMD Radeon HD 6450
    HP p6787c - Windows 7, 8GB RAM, NVIDIA GT 240

  • Query don't use the right index when using bind variables

    Hi people !
    I need some help because I have an issue with a query that don t use the right Indexes as it should
    First of all, I have mainly three tables :
    ORDER : Table that contains description for each Order (approximately 1 000 000 Records)
    ORDER_MVTS : Table that contains the tasks made (called movements) to set up each Orders
    with quantity of packages prepared for each product (approximately 10 000 000 Records)
    PRODUCT : Tables that contains the products (approximately 50 000 Records)
    When I launch the query with hard coded values, it brings back response very fast
    because it uses the right index (ORDER_DHR_VALID) which represent the date and hour of the order
    (with format 'DD/MM/YYYY HH24:MI:SS'). The selectivity for this index is good.
    NB 1: I have to use the trick " >= Trunc(date) and < trunc(date) +1 " to filter on a simple date because
    the index contains hour and minutes (I know it wasn't probably a bright idea at conception time).
    NB 2: The index on ORDER_MVTS.PRODUCT_CODE is'nt discriminating enough because there is'nt enough different products.
    It's the same for index on CUSTOMER_CODE and on MVT_TYPE so only the index on ORDER.DHR_VALID is good.
    Here is the correct explain plan when I execute the query with hard coded values :
    SELECT SUM(ORDER_MVTS.NB_PACKAGE)
    FROM ORDER_MVTS, PRODUCT, ORDER
    WHERE ORDER.DHR_VALID >= TRUNC(to_date('14/11/2008 10:04:56','DD/MM/YYYY HH24:MI:SS'))
    AND ORDER.DHR_VALID < TRUNC(to_date('14/11/2008 10:04:56','DD/MM/YYYY HH24:MI:SS')) + 1
    AND ORDER_MVTS.MVT_TYPE = 'DELIVERY'
    AND PRODUCT.CODE = ORDER_MVTS.PRODUCT_CODE
    AND ORDER_MVTS.ORDER_CODE = ORDER.CODE
    AND ORDER.CUSTOMER_CODE = 'ADIDAS'
    AND PRODUCT.CODE = 1234
    Rows Row Source Operation
    1 SORT AGGREGATE
    2 NESTED LOOPS
    4 NESTED LOOPS
    2 INDEX UNIQUE SCAN (object id 378548) --> PRODUCT_PK
    4 TABLE ACCESS BY INDEX ROWID ORDER
    777 INDEX RANGE SCAN (object id 378119) --> ORDER_DHR_VALID
    2 TABLE ACCESS BY INDEX ROWID ORDER_MVTS
    30 INDEX RANGE SCAN (object id 377784) --> ORDER_MVTS_ORDER_FK
    Now the problem is when the query is used in a Cursor with bind variables.
    It seems like Oracle don't use index on ORDER.DHR_VALID because he can't figure out that he have
    to actually filter on a short period of time (only one day).
    So Oracle uses the index on ORDER_MVTS.PRODUCT_CODE which is'nt a bright idea (it takes 10 secondes instead of just one)
    Here is the bad explain plan :
    Rows Row Source Operation
    1 SORT AGGREGATE
    2 NESTED LOOPS
    722 NESTED LOOPS
    2 INDEX UNIQUE SCAN (object id 378548) --> PRODUCT_PK
    722 TABLE ACCESS BY INDEX ROWID ORDER_MVTS
    1790 INDEX RANGE SCAN (object id 377777) --> ORDER_MVTS_PRODUCT_FK
    2 TABLE ACCESS BY INDEX ROWID ORDER
    1442 INDEX UNIQUE SCAN (object id 378439) --> ORDER_PK
    Now I have found two solutions to this problem :
    1) using a Hint to force the use of index on ORDER.DHR_VALID (with /*+ INDEX(ORDER ORDER_DHR_VALID) */ )
    2) Using Dynamic SQL and keeping the date hard coded (but not the other values except mvt_type)
    For example :
    QUERY :=
    'SELECT SUM(ORDER_MVTS.NB_PACKAGE)
    FROM ORDER_MVTS, PRODUCT, ORDER
    WHERE ORDER.DHR_VALID >= TRUNC(TO_DATE('''||To_char(P_DTE_VAL,'DD/MM/YYYY')||''',''DD/MM/YYYY'')) '||
    AND ORDER.DHR_VALID < TRUNC(TO_DATE('''||To_char(P_DTE_VAL,'DD/MM/YYYY')||''',''DD/MM/YYYY'')) + 1 '||
    AND ORDER_MVTS.MVT_TYPE = 'DELIVERY'
    AND PRODUCT.CODE = ORDER_MVTS.PRODUCT_CODE
    AND ORDER_MVTS.ORDER_CODE = ORDER.CODE
    AND ORDER.CUSTOMER_CODE = :CUSTOMER
    AND PRODUCT.CODE = :CODE ';
    These two solutions work but Number 1 is bad in theory because it uses a Hint
    and Number 2 may be difficult to code.
    So my question is : Does someone knows another solution to force the use of index ORDER_DHR_VALID that can be simple and reliable.
    Thank you very much for support
    Edited by: remaï on Apr 1, 2009 4:08 PM

    What version of oracle you have? CBO work is different in 9i and 10g.
    Usually cost based optimizer do not want to use index for >< condition with binding variables because optimizer can not use statistic to determine selectivity, and by default selectivity of <> operators is low.
    (As I remember '>' selectivity by default is 5%, you have two conditions > and <, therefore resulting selectivity will be 0.05*0.05=0.0025 as two independent events, but selectivity of other conditions
    ORDER_MVTS.MVT_TYPE = 'DELIVERY' or ORDER.CUSTOMER_CODE = 'ADIDAS' looks much better for CBO)
    The best solution I see is do not use binding variables. Actually your query looks as searching query, which executes not so often, therefore you will not have perfomance win along of skipping execution plan creation.
    Edited by: JustasVred on Apr 1, 2009 10:10 AM

  • Adobe acrobat anchor link not going to the right page.

    I have anchor link from html page like http://www,pbgc.gov/docs/2006bluebook.pdf#page=15, when you try to click the link on my machine and some other employees it goes to first page rather than going to page 15. Other employees get page 15. Have anyone experience this issue or know why this issue happen in Adobe Acrobat.
    Most our employees have Adobe Acrobat 8, Also there are some who have Adobe Acrobat 9. I was thinking it may due to the version but someone with Adobe 8 is also having the issue.
    Please advise. Thanks!
    Regards,
    Mohamud
    Ext 5466

    Is Adobe Reader being opened as a plugin in your browser, or as an external application? I think the links to specific locations in the document only work if Adobe Reader is used as a plugin. I've had the same problem, and it was because I didn't have Reader as a browser plugin.
    Ken Dyall.

Maybe you are looking for