Hardware compressor and am not quite sure how to use it in logic express 9. Please help???
I recently bought a dbx hardware compressor and am not quite sure how to use it in logic express 9. I hav a focusrite saffire 6 usb audio interface and am not sure how to use it in logic. Please help???
Hi Ujjawal,
Use the Tab-order property of IR object.
In design mode, select the any command button, right click and select the property. you will find the window for "Tab-Order". It lists all the objects available in that dashboard. Here you can arrange the tab order..
Hope it will help you.
Thanks & Regards,
Mohit Jain
Similar Messages
-
I recently bought a dbx hardware compressor and am not quite sure how to use it in logic express 9. I hav a focusrite saffire 6 usb audio interface and am not dont how to use it in logic. Please help???
MUYconfundido wrote:
Pancenter,
Thanks for the response, but I do not have a midi interface. I am using a midi to usb connector cable, thus bypassing the need for a Midi interface.
The Mac reads the USB cable as a midi device, but not the keyboard that I am trying to use as a controller. I have tried it with my korg sp 300 and with my Nord Electro 2.
Thoughts?
Thanks,
Tristan
Tristan...
This is what you have, correct?
http://www.alesis.com/usbmidicable
This from Alesis..
"The AudioLink Series USB cable receives and outputs MIDI signal thanks to its internal interface. The USB-MIDI Cable connects plug-and-play to your Mac or PC for an all-in-one USB-MIDI solution."
Notice, -internal interface-. What you have is a simple USB MIDI Interface. Most MIDI interfaces are USB.
My point is (was), MIDI OUT of the Korg goes to the connector marked MIDI IN on the Alesis, those new to MIDI often get this wrong.
pancenter- -
If anyone could please help I just sold my ipod and backed it up on my computer, and I am not quite sure how to access the info to make sure it all got saved before I ship it off.
Unless you redeemed an iTunes gift card into that account. just start all over with the correct email address.
-
Hi, I wonder what to do because my ipod touch 5 wish neither open and do not want to load. I really wonder what to do, please help me? : $
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
I accidently put all my pics from my computer onto my phone and I have no idea how to get them off. Can u please help??
PhilipRoy wrote:
Please see this article about transferring photos from a mobile device to a computer.
http://support.apple.com/kb/ht4083
Good luck Friend.
That's not going to help. That article is for moving photos from iOS device to computer, not for removing them. Additionally, photos synced via iTunes cannot be manually removed from the device. You have to use iTunes to 'unsync' them, as FoxFifth stated.
Camera Roll pictures are the only ones that can be imported from device to computer. Album folders cannot be moved from device to computer. -
Hi. installed mountain lion. Not Happy. How do i revert to Lion. thanks. Please Help., Hi. installed mountain lion. Not Happy. How do i revert to Lion. thanks. Please Help.
Only way is if you made a backup of your system before you installed Mt Lion.
Or if your system came with Lion Pre-Installed you boot to the online recovery system, Hold down Command+option+r at startup until you see a spinning globe in the center of the screen. -
I accedentally switched my iTunes to the UK store and I don't know how to switch it back. Can someone please help?
Click here and follow the instructions to change the iTunes Store country.
(105976) -
i have adobe cc on pc but i have now joined the mac world but not sure how i change my pc software to mac please help
Your Photoshop CC can be installed on a Mac or PC. Just install the Mac CC Desktop app and install Photoshop CC from there. It will be in your Application folder.
-
this morning my iphone showed up a activation problem then it told me to go to devoloper.apple.com and register for the ios developer program.. it costed me 99 dollars. but i did it.. just a moment ago.. how do i access my iphone now? please help me this is real urgent.
this in my problem too apple say : ur request is pending now and it did not activated yet ! ?
what should i do? -
I spent my SG$39.90 to purchsed a new version of mac lion 10.7.2. But sadly, after installed i could not open my webcam or facetime.It is very frustrating and making me very upset due to this situation.If i know like this i would never purchased the new Mac lion version!please help me to solve this problem!thanks!
You can try the following:
Install or Reinstall Lion/Mountain Lion from Scratch
Be sure you backup your files to an external drive or second internal drive because the following procedure will remove everything from the hard drive.
Boot to the Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Erase the hard drive:
1. Select Disk Utility from the main menu and click on the Continue button.
2. After DU loads select your startup volume (usually Macintosh HD) from the
left side list. Click on the Erase tab in the DU main window.
3. Set the format type to Mac OS Extended (Journaled.) Optionally, click on
the Security button and set the Zero Data option to one-pass. Click on
the Erase button and wait until the process has completed.
4. Quit DU and return to the main menu.
Reinstall Lion/Mountain Lion: Select Reinstall Lion/Mountain Lion and click on the Install button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible
because it is three times faster than wireless. -
I had my IPad 2 jailbroken and deleted Cydia from it but still have some apps that are still on my IPad and no way to delete them. I have tried to restore it several times and it just keeps giving me an error message. I have tried deisabling firewall, different usb cords and usb ports. NOTHING! Please help!!!!
Sorry James... But...
The discussion of Jailbroken Devices is against the Terms of Use of this Forum.
Why Jailbreak is Not Supported > http://support.apple.com/kb/HT3743
Perhaps google can assist you in your quest... -
hi
yesterday i tryed to sownload the new software OS5 for my iPhone and after waiting the proccess to end, suddenly a message appeares saying the iphone wont restore!
after that the iphone stop working at all and not showing the home screen to me !
just it works by showiin the apple logo then a loading process that works for ever till the barrerry ends.
so please help meand can i fix it here or i have to go to a maintinace shop
thank youConnect the charger and let it charge for at least 30 minutes before you try to turn it on. Then let it charge untill full. The iPhone (or iPad) need at least a little charge before you can turn it on.
-
Need Help new Nano mp3 player, not really sure how to use it
I cant get any music on the player, im using morpheus downloaded files, is this a problem or is there a way for me to reformat them or what. Im new to this so i really have no idea what to do. Thanks.
What format are the files in? As far as I can see Morpheus is a P2P file sharing program, not a specific file format so it depends on which files you download. The Nano will play mp3 and wma files.
As long as they are one of these types of file you should be able to download them to your PC and then drag'n'drop them onto your Nano using Windows Explorer.
PB
Message Edited by PeeBee on 2-8-2005 08:45 PM -
Not too sure how to use Recursion
Hello, for my assignment I have to use recursion, I have to divide the frame into 4 parts, placing different images in the top right, bottom right, and bottom left portions. The top left part is supposed to be divided into 4 parts and have the same thing done to it, as have the three images again and the top left divided into four parts. Anyone know how I can get a start on this? Any suggestions would be appreciated.
Ok, I have a main and a Picture Panel. Here is what I have so far. I got three pictures positioned correctly, I just have no idea how the top left part is going to work.
import java.awt.*;
import javax.swing.*;
public class PicturePanel extends JPanel
private Image _mugen, _jin, _fuu; // declare the images
public PicturePanel () // constructor
_mugen = new ImageIcon("mugen.jpg").getImage(); // instantiate the image
_jin = new ImageIcon("jin.jpg").getImage(); // instantiate the image
_fuu = new ImageIcon("fuu.jpg").getImage(); // instantiate the image
public void paint(Graphics g) // draw the images and bounding boxes
g.drawImage(_mugen, this.getWidth()/2, 0, this.getWidth()/2, this.getHeight()/2, null); // draw the _mugen image
g.drawImage(_jin, this.getWidth()/2, this.getHeight()/2, this.getWidth()/2, this.getHeight()/2, null); // draw the _jin image
g.drawImage(_fuu, 0, this.getHeight()/2, this.getWidth()/2, this.getHeight()/2, null); // draw the _fuu image
} -
Contacts and Calendar not synching. (Centro, Windows XP, Palm Desktop 6.2.2) Please help!
I originally posted on the Hotsync forum, and it was suggested that I post my question here. Important information: My office uses Microsoft Outlook Exchange, and I have my Centro set up to get my emails. It also wants to sync my contacts and calendar; however, that is completely unneeded for my purposes. I need to synch my Contacts and Calendar with my Palm Desktop. If there is something I have to check or uncheck to do so, please tell me how.
This is my original post:
"When I hotsynch, my memopad, my documents to go, everything seems to synch except my contacts and calendar.
After a few hours on the phone with tech support at sprint, we went for the nuclear option, hard reset, and the temporarily solved the problem, but now it has returned.
Information that might be important:
I'm getting a failed to backup 1 file error>PmTraceDatabase>Protocol Error: Handheld file could not be opened (4004)>SYNCERR_FILE_NOT_OPEN. This may or may not be relevent.
Anyway, I appreciate any help with this. I depend on this PDA phone to keep me organized and there's a slight and embarrasing touch of panic to how I feel now that it is not working correctly."
Post relates to: VisorPhoneOkay, I'm continuing to do research on this, and here's my suspicion, maybe true or maybe false. When I set up versamail to get mail from my office's exchange server, it also configured my contact list and calendar to sync as well, and synching with the the exchange server and synching with my desktop software are mutually exclusive.
If this IS true, then hopefully there is a way to set it up so I synch my email only with the exchange server, and leave my contact list and calendar configured to synch with my desktop software.
Any feedback or assistance would be greatly appreciated.
Post relates to: VisorPhone
Maybe you are looking for
-
Dump data from a table into wwv_flow_files
HI, Could you help me, to take data from a table, and insert it into blob_content in wwv_flow_files; and data should be stored in a .txt file regards, Rajesh
-
Is quicktime ever going to be fixed... it's been rubbish for years.
I have a large number of audiobooks, I join the mp3 files into one big one then convert them to m4b in Itunes or MP3 to Ipod audiobook converter. These always played perfectly on my iPod classic, many of them won't play now I have a touch, they won't
-
I just bought a new 4s and I can't activate using cellular connection, what is wrong?
I just bought a new 4s and I can't activate it using cellular connection and Wi-Fi and also I can't seem to get the iTunes connection option from my phone as well. What can I do?
-
I am trying to add a watermark for a letterhead, only seem to be missing something. When import photo as watermark I select advanced then make selectable & then mask only it only selects part of photo. How do I use complete photo for a watermark Than
-
[Solved] Database Isolation Level - ADF BC
How and Where do we set Isolation Level for ADF BC ? Chandresh Message was edited by: Chandresh