Hardware requirement for Using SAP ECC 6.0 (IDES)

Hi
I am planning to buy a Laptop for Learning more about SAP modules. I am planning to install ECC 5.0 or 6.0 on the laptop.
Can any one tell me about the minimum configration required for SAP IDES installation. If possible please let me know the processor to be used, the speed of the processor, the RAM and HDD required.
Also Kindly let me know from where do we get the IDES licence version of ECC 5.0 / ECC 6.0
Piyush

Hi
<b>Please go through the following SAP OSS Notes -></b>
Note 822208 - IDES mySAP ERP ECC 5.0 SR1
Note 982228 - Installation KJEPS 601 on SAP ECC 6.0
Note 1070948 - SAP Best Practices Baseline Package PL based on ECC 6.0
Note 748977 - INST: mySAP ERP 04 ABAP on iSeries
Note 855498 - Installation Prerequisite Checker
Note 1012486 - Important Information on upgrading ERP-Systems in HA-Setups
Note 855897 - SAP Business Suite 2005 Installation:IBM eServer iSeries
Note 989368 - Upgrade to SAP ECC 600 with VIRSA 400_700
Note 1034686 - Installation: Leasing Strategic Improvements on ECC 6.0
<u>Please Contact local SAP support from this link below</u>
https://websmp209.sap-ag.de/~form/handler?_APP=00200682500000002025&_EVENT=DISPLAY&SELAREA=501100035870000000694#
Do let me know.
Regards
- Atul

Similar Messages

  • Hardware Requirements for the SAP SSM (pilot works) installation

    Hi All,
    Can any one please provide me with the information on hardware requirements for the SAP SSM (pilot works) installation.
    Thanks in advance.
    Anjum.

    I'm think if you can install Windows then enough RAM and Processor you have ....
    In any case "the more the better" .
    Regards.

  • Hardware requirements for using BI-IP

    Hello experts,
    i would like to have something like a how to paper in which i can find something about the hardware requirements for ideal using of BI integrated planning. Can anyone give me a help?
    Thanks in advance.
    Best Regards,
    Ali

    HI Ali,
    I have been unable to find specific hardware requirements for using BI -IP so I would refer you to the hardware requirements for running Bi as per notes:
    1013139 - prereqs for frontend bi7
    1013201 - Hardware and Software requirement for BI Standalone frontend
    and please also review the IP note:
    1056259 - Collective note: Performance of BI planning
    I hope this helps
    best regards
    Orla.

  • Hardware Requirement for the SAP E-Sourcing 5.0

    Hi,
    Can any one tell me please about hardware requirement for SAP E-Sourcing 5.0.
    Thanks
    Sanjay Rai

    Hi Sanjay,
    May be this forum is not relevent.Hardware requirement mainly may depends on number of user licences which your company looking.also based on number applications which u r going to install....
    Rgds,
    Gadde.

  • Hardware Requirements to install SAP ECC 5.0/6.0

    Hey Gurus,
    Could you please tell me that what is the best hardware to go for to install SAP ECC 5.0/6.0 so that we can afford the future changes also without buying the new hardwares.
    Thanks 'n Regards,
    Ashwani

    Dear Ashwani,
    It will solely depend on the number of concurrent users, the implemented Modules (project scope), the data volume, Transaction volume etc.
    have you tried SAP Quicksizer http://service.sap.com/quicksizer ?
    This will give you your requirements in SAPS (CPU power) and RAM. Then you can check that with your H/W vendor and they wil suggest you suitable configuration.
    Cheers !!
    Satya.
    PS: points always encourage me to reply....Thx !

  • Requirements for using SAP Kernel 7.20_EXT, e.g. with ERP 6.0 EhP 6

    Dear community,
    we want to bring your attention to the important fact that upcoming SAP product releases and Enhancement Packages, like SAP ERP 6.0 EhP 6 and other members of the BS7i2011 release of SAP Business Suite 7, will use the new 7.20_EXT kernel. As we are using fully supported third party software when building this version of the 7.20 kernel, kernel 7.20_EXT allows us to safely support our customers in the upcoming years. Our updated build environments make SLES 11 Service Pack 1 and RHEL 6 the minimum Linux versions allowing you to run SAP Kernel 7.20_EXT. Please take this prerequisite into account when implementing projects that require or allow you to use SAP Kernel 7.20_EXT.
    You can find more information here:
    Note 1563102 - Linux Requirements for 7.20_EXT kernel
    SAP Product Availability Matrix for SAP NetWeaver 7.0
    Or directly access the PAM for SAP NetWeaver 7.0 EhP 3  (page 4).
    In case of questions, please feel free to contact us by a mail to linux[at]sap.com as well.
    Best Regards,
    Alexander Hass.

    Dear community,
    we want to bring your attention to the important fact that upcoming SAP product releases and Enhancement Packages, like SAP ERP 6.0 EhP 6 and other members of the BS7i2011 release of SAP Business Suite 7, will use the new 7.20_EXT kernel. As we are using fully supported third party software when building this version of the 7.20 kernel, kernel 7.20_EXT allows us to safely support our customers in the upcoming years. Our updated build environments make SLES 11 Service Pack 1 and RHEL 6 the minimum Linux versions allowing you to run SAP Kernel 7.20_EXT. Please take this prerequisite into account when implementing projects that require or allow you to use SAP Kernel 7.20_EXT.
    You can find more information here:
    Note 1563102 - Linux Requirements for 7.20_EXT kernel
    SAP Product Availability Matrix for SAP NetWeaver 7.0
    Or directly access the PAM for SAP NetWeaver 7.0 EhP 3  (page 4).
    In case of questions, please feel free to contact us by a mail to linux[at]sap.com as well.
    Best Regards,
    Alexander Hass.

  • Hardware requirements for SAP ERP 2005 using ECC 6.0

    Hello everyone,
    i am already new and need information about the min. hardware requirements for a SAP ERP 2k5 System using ECC 6.0 with IDES 7.10.
    I read the Master Guides about ERP, but i am not even more clever than before.
    The OS is MS Windows 2k3 Server EE.
    The last information i had from another one to this configuration is:
    1 dual-core cpu (? Ghz)
    4-6 GB RAM
    300 GB HDD
    Does it fit? Can anyone help me out?
    Thanks in advance.
    Message was edited by:
            Marcel Jahn
    Message was edited by:
            Marcel Jahn

    Hi,
    IDES 7.10?!?
    If it's an IDES system you want to set up, HDD space may be the bottleneck. It's sufficient for installation, but you may run out of disk space since note <a href="https://service.sap.com/sap/support/notes/1013391">1013391</a> states
    Hardware Requirement
                     MS-SQL  ORACLE   MaxDB   DB2 Win/Unix  AS/400
    DB size (GB):    160     220      220          160       280
    Since IDES is for education and training purposes only the rest should be sufficient.
    I'm running an ERP 6.0 IDES system (32 bit) on a single core, 3.2 GHz, 4 GB RAM, 250 GB System and 500 GB SAP/DB HDD with pretty good response time.
    Peter
    Points always appreciated

  • Hardware requirement for CE7.1 for the development purpose

    Experts,
    How to calculate the hardware requirement for using CE7.1 for the development purpose? Do you have some parameters or guidelines for it?
    We will be using CE7.1 for the development of EP contents,  Web dynpro, Web services and Guided procedures.
    We need to calculate minimum hardware requirement for this purpose, but could not find the authorised document from SAP.
    I searched in the SDN. It is available for NetWeaver 7.0 but not for CE7.1.
    Any hints will be highly appreciated.
    Regards,
    sudeep

    Hi Sudeep,
    On the following links you will find the Composition Environment Product Availability Matrix and the installation guide of Composition Environment 7.1 Developer Edition.
    SAP NetWeaver Composition Environment 7.1
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/e0e9cc7b-0469-2a10-d3a8-f4f04b30fb0b
    For accessing the Product Availability Matrix document the service marketplace access is required.
    Best regards,
    Yasar

  • Hardware required for SAP DMS Server

    hi all,
    my SAP system is  SAP ECC 6.0 EHP1 with oracle  OS is linux ,  if we install DMS server on this same sap system or on saparate system. how much hardware required for DMS server. our mostly will be imaging documents.
    Regards
    Khan

    Hi Khan,
    maybe the information in the SAP online help could be useful under http://help.sap.com/saphelp_erp60_sp/helpdata/en/b2/c043a66fab11d1949500a0c92f024a/content.htm
    Best regards,
    Christoph

  • Hardware Requirements for ECC 6.0

    Hi everyone.
    Can anyone tell me the hardware requirements for ECC 6.0 with RAID implementation
    OR
    Any link where i can find the information.
    **i did check in the market place***
    Thank you
    Kiran Kumar

    Hi,
    Begin in http://service.sap.com/quicksizing for hardware requirements in SAPS(processing), memory and disk space. Then check in installation guides http://service.sap.com/instguides the best configuration
    of the disks in RAID. Basically:
    RAID 1 - database server program files
    RAID 5 - data files SAP
    RAID 1 - transaction log file
    Best regards,
    Roger Vier

  • Minimum Hardware Requirement for SAP Business One For HANA

    Hello EveryOne,
        I want to install SAP Business One for HANA (On Premises) Version on my Laptop. What would be the minimum hardware requirement for that so that it can run smoothly on the system.
    Is it can install on laptop or I need to buy giant server.
    Thanks in advance

    Hi Idrees,
    Check following links:
    http://help.sap.com/hana/SAP_HANA_Server_Installation_Guide_en.pdf
    http://help.sap.com/hana/SAP_HANA_Master_Guide_en.pdf
    http://help.sap.com/hana/SAP_HANA_Server_Installation_Guide_Unified_Installer_en.pdf
    http://help.sap.com/hana/SAP_HANA_Installation_Guide_en.pdf
    One more thing to note that you can use only HANA Certified Hardwares for B1 (Dell, Fujitsu, HP, IBM, HUAWEI)
    Hope it helps.
    Thanks & Regards
    Ankit Chauhan

  • Hardware requirement for sap system.

    Hello All,
    i want to install SAP on my local home PC.
    Kindly let me know the hardware requirment for this.
    So that i can

    If You want to install IDES 4.7EE
    Hard disk minimum 80 GB 120 GB or 160GB best
    Ram: Minimum 512 Mb 1 GB Best u can run in 256MB also
    Processor : Minimum PIII , PIV is best
    DVD Drive
    Remaining Normal
    If You want to install IDES ECC5.0  only R/3
    Hard disk minimum 160GB best 250 GB
    Ram: Minimum 1 GB  U can run in 512MB  alos
    Processor : Minimum  PIV
    DVD Drive
    Remaining Normal

  • Hardware requirement for SAP E-Sourcing 5.0

    Hi,
    Can any one tell me please about hardware requirement for SAP E-Sourcing 5.0.
    Thanks
    Sanjay Rai

    Hi
    Frictionless SRM 2005 SP3 has been rename SAP E-Sourcing SAP E-Sourcing 4.2.00.
    For detailed SRM Installation, Upgrade, Heardware requirments, Please go through the details of the Release-Independent Related OSS Notes given below ->
    Note 1093204 - Object Migration (This Note contains a detailed ZIP file)
    Note 1122739 - SRM E-Sourcing 5.0 Patch B (5.0.00_B) Release Notes
    Note 1094095 - SRM 2005 SP1 Patch O (4.1.00_O) Release Notes
    Note 1094094 - SRM E-Sourcing 4.2 Patch L (4.2.00_L) Release Notes
    Note 1094092 - SRM E-Sourcing 4.2 SP4 (4.4.00) Release Notes
    Do let me know.
    Regards
    - Atul

  • Maximum user and hardware requirement for SAP B1

    Dear All,
    One of our prospect said that they will need 80 users and 160 connections to servers. And every year there will be additional user growth as much 30. What will be the hardware requirement for that ? has SAP B1 installed in that kind situation ? I appreciate your answer.
    Rgds,

    Mark,
    Please refer to the following PDF
    https://websmp206.sap-ag.de/~form/sapnet?_FRAME=CONTAINER&_OBJECT=011000358700000270512007E&_SCENARIO=01100035870000000183&_ADDINC=
    Regarding 80 user initially with a growth of 30 user every year should not be a problem, but you might want to consider the volume of transactions to determine the performance aspect of the system.
    Also check the following link
    https://websmp206.sap-ag.de/smb/sbo/resources
    Good luck
    Suda

  • Hardware requirements for SQL database used with TestStand

    We are wanting to set up a SQL server to store the data from TestStand.
    How do we determine the hardware requirements for this server? It will be used with 10-30 machines running tests and logging data and another 5-10 machines running queries to pull the data back out for analysis. The result data size will range from 50-25,000 results per run (run times are 1 minute for 50 result tests and 5 hours for the 25,000 result tests).

    Hi,
    database design and hardware requirements are never easy. There are a lot of scientific papers on work load tests and requirement assumptions. I can not give a short answer which machine to use. Just some ideas and starting points.
    The most important parts of a database system with large data sets are network bandwidth, RAM and storage bandwidth. With smaller data sets and more complex transactions the CPU becomes more important.
    In this TS case the data sets are usually rather small. If the queries are not too complex, the requirements seems to be not too high.
    Database performance is usually measured in transactions per minute (tpm). Special database servers can perform several thousands tpm and have costs starting at about 15 $ per tpm. See MS' ad page for a g
    ood starting point: http://www.microsoft.com/sql/evaluation/compare/benchmarks.asp
    You may also visit the TPC.org homepage.
    To be more specific.
    I'd choose a modern Intel-based system like P4-3MHz (that have virtual multiprocessors) with at least 512 MB RAM and a RAID5 hard disk storage system (not nercessarily SCSII) with at least 3 single HDs. Use a 100 MB LAN connection at least, best with a switch. Don't forget backup!
    Check also the pages of your preferred database provider.
    I am on a starting point here too. We have chosen mySQL, which runs (at least now) on the very same machine where TS & LV are running. We plan to test this setup with increasing burden to get a practical assumption of the HW requirements. The planned final setup will have up to 5 test stations and 5 query stations. We'll run about 50 rather complex tests of about 4 hours each that operate in parallel on the test stations.
    HTH and
    Greetings from Germany
    Uwe

Maybe you are looking for