Has anyone come up with a solution for the WD Passport and Mavericks OSX issues yet?

I was wondering if anyone has come up with a solution for the newer Macbook Pro/Mavericks and external WD Passport not mounting problems?
I have a couple of year old WD Passport that worked fine in my old 2009 Macbook Pro, the problem is the old computer crashed.
My dilemna; My new 2014 Mackbook Pro will not open my WD Passport, called WD Support, their answer, sorry, nothing has been solved.
Is there anyway I can get access to my files on the Passport with any other software, or by using a PC.
I am aware of reformatting the HD, and have read all the forums I could find and have tried installing the WD Update as well, (with the support tech from WD) and nothing works.
I know that my WD Passport works, so please don't suggest checking it, or the cord.
I appreciate all the help anyone can offer, and I am with all the rest of you struggling for solutions.
Thanks so much

Hi everyone, this is what I did
1. upgrade disks to the latest firmware
2. de-install ntfs-3g and MacFuse.
3. Re-install NTFS 3G  without Macfuse.
4. Next step: Install OSXFUSE latest version with selection MacFUSE compatibility layer.
5. Last step: Install Fuse Wait
Note: between steps 2 and 5, I restarted my machine.
It worked for me, after about 4 hours.

Similar Messages

  • TS1702 Has anybody come up with a solution for updating the apps...!!!????

    Has anybody come up with a solution for updating the apps ....!!!!????

    Yes, I updated all the time.
    What's your problem.

  • Has anyone come up with a spreadsheet for investment tracking?

    Has anyone engineered a fairly simple spreadsheet for investment tracking?
    I'm using the Office 2008 Excel template, but it seems squirrelly/fragile. I don't want to get all my info into it and have it fold on me.
    Thanks,
    John
    MBP, Mavericks

    There are hundreds  a quick Google search found:
    http://office.microsoft.com/en-us/templates/my-financial-portfolio-TC103827362.a spx

  • Has anyone come up with new workarounds for Logic routing bugs?

    There have been many threads regarding what seem to be a set of similar bugs. These inlude an audio intrument not sounding after a while, or a channel of automation not being read; and the problem is easily fixed by closing and re-opening the song. That would be a fine workaround except that some songs take a long time to load. I used to have these problems occasionally, but recently they have become so common as to be almost constant. That's bad news, but it also is potentially good news since it means that something in my system has an influence on these bugs. I haven't found a thread in which anyone isolated a factor that helps or hurts, but it's hard to imagine all the keywords for this set of problems, so maybe I missed an idea.
    Also a new similar bug has started appearing in my system. When I add a bus send, once in a while either some or all audio channels will go silent, even though the graphic indicators indicate that they should be heard. The silent channels might or might not include the one with the new bus send. Remove the bus send and the sound comes back.
    It seems as though changes in routing have binding problems.
    Thanks for any ideas!

    Absolutely no ideas on workarounds. I have the exact same issues.
    Most of the time restarting the computer and session will cure them, but there have been projects where no matter what I do, the faders will not follow the automation data and EXS24 instruments cut out at the same exact time in the arrangement. This occurs even with as few as 6 EXS24 instruments open when on some projects I have up to about 85 open and 30 streaming at the same before I get a CoreAudio error.
    Terrible...terrible.
    Any word on whether or not 7.2 addresses this issues?

  • Has anyone come up with a solution on why the red circle with question mark inside appears.

    Has a solution been brought

    Could the problem be that you're trying to make a template that includes assignments and placeholder frames? Because that won't work ... sorry, would be nice if it could.
    You will get a missing assignment icon if you move the InDesign file, duplicate it, or rename it via a Save As. That's because assignments are actually attributes of the original file -- they are NOT linked -- and they don't stick with it when the original file is modified (other than normal "Save's"). The time to create assignments is when the live "final" file (even if it's filled with empty frames) has been created for that specific publication/issue, and it will not be moved or renamed during the production cycle.
    So if you're doing what I'm guessing ...  if you start w/an InDesign file, create assignments and assign empty text frames, and save that as a template  ... then you will always end up with "missing" assignments. That's because a template file, when double-clicked, creates an Untitled copy of itself.
    "I am getting the missing link for the assignments after they are finished."  If an assignment -- an ICMA file, not the linked stories, the ICML files -- shows the red "missing" icons in the assignments panel, the only solution is to recreate them. They are not linked to the layout so there is nothing to relink.
    The fix is to select each missign Assignment in the Assignments panel and choose Change Location. It's a bizarre name for the actual function which is  to "recreate the Assignment." Be careful of the linked ICML files that go along with that layout (and those assignments).
    You will also run into problems if you try to re-use the same linked ICML files for multiple issues. Best to start with a "normal" INDD file, then export Assignments/linked stories for that one issue.  When you're done, unlink all the stories and delete the Assignments, turning it back into a normal INDD file.  That normal file is safe to duplicate and use as a starting point for the next issue.
    AM

  • HAS ANYONE COME UP WITH 5.1 SOUND ON EARY 09 IMAC

    OTHER THAN CONNECTING TO A HOME AUDIO SYS. HAS ANYONE COME UP WITH A COMBO OF
    AVAILABLE EQUIPMENT TO USE FOR 5.1 SOUND ... THANX ....NEAL702

    Neal702,
    Please don't type in all caps, it is considered shouting and rude. I'm sure that wasn't your intention, it's just good netiquette.
    Anyhow the iMac will put out 5.1 sound assuming that is what you are trying to do. I recommend you find a cable similar to this:
    http://www.amazon.com/3-5MM-TOSLINK-FIBER-OPTIC-CABLE-TOSLINK/dp/B00006LVF3

  • Has anyone come up with criteria on who should have an iPad at work?

    Has anyone come up with criteria on who should have an iPad at work?

    I'm in health care as well...the executives will probably be the first to get them since they are the ones that sign the invoices.....but seriously the iPad has  a number of uses in health care...patient education, display of real time clinical data through a vpn connection and in-house apps, desktop virtualization etc.  I really believe if you can get the devices in the hands of clinicians, they will think of innovative ways to use them for far more than email, contacts, calendars etc.... 

  • IPad 1 Safari Crashes Constantly and getting worse day by day.  Has Apple come up with a solution?  Now I am hearing its alos happening on the newer models.  My company is about to buy a lot of tablets and I will not recommend Apple anything til they fix.

    iPad 1 Safari Crashes Constantly and getting worse day by day.  Has Apple come up with a solution?  Now I am hearing its also happening on the newer models.  My company is about to buy a lot of tablets and I will not recommend Apple anything until they fix the problem.  Granted 30 or 40 iPads is not a huge impact but i promise once the outside world hears about this BS things will change.  There are plenty of other tablets out there that do not have this problem.  At the very least we should have the option of rolling back to a stable IOS...

    I have already tried all the things mentioned above as well as other things such as other browsers etc.  Its is obviously a problem with the hardware.  I also borrowed a brand new 4th gen iPad and it does the same thing.  Even after upgrading it to 6.01.  An occasional crash is one thing and can easily be waved off but this is clearly systemic and the problem appears to be related to graphical images and videos.  Both iPads are the 64gb versions, the only difference other than model is the iPad 1 has ATT cellular.  The new version is clean i.e no other APPs loaded other than what came with it.  I have 7 more coming but im seriously considering sending them back in favor of an Android tablet or the MS Surface.

  • Has anyone experienced problems with Mackeeper? I did not complete downloading this software. Yet, occasionally when on the internet, I will have the MacKeeper multi-colored circle replace my pointer. How do you deal with this?

    Has anyone experienced problems with Mackeeper? I did not complete downloading this software. Yet, occasionally when on the internet, I will have the MacKeeper multi-colored circle replace my pointer. How do you deal with this?

    Welcome to Apple Support Communities
    Don't download MacKeeper. Users complain about this app and it damages OS X. Also, Mac OS X knows how to take care of itself, so you don't need any other cleaning application that may damage OS X. See > https://discussions.apple.com/docs/DOC-3691

  • Has anyone found a quick, permanent solution to the missing iTunes.msi file. It's very frustrating that I can't uninstall or reinstall. I have a new iphone and I'm dead in the water:)

    Has anyone found a quick, permanent solution to the missing iTunes.msi File? I have tried many times to upgrade both itune and quicktime and get the same old error notice. Surely, by now, someone has found out how to get around this mess. Please....

    (1) Download the Windows Installer CleanUp utility installer file (msicuu2.exe) from the following Major Geeks page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page):
    http://majorgeeks.com/download.php?det=4459
    (2) Doubleclick the msicuu2.exe file and follow the prompts to install the Windows Installer CleanUp utility. (If you're on a Windows Vista or Windows 7 system and you get a Code 800A0046 error message when doubleclicking the msicuu2.exe file, try instead right-clicking on the msicuu2.exe file and selecting "Run as administrator".)
    (3) In your Start menu click All Programs and then click Windows Install Clean Up. The Windows Installer CleanUp utility window appears, listing software that is currently installed on your computer.
    (4) In the list of programs that appears in CleanUp, select any iTunes entries and click "Remove", as per the following screenshot:
    (5) Quit out of CleanUp, restart the PC and try another iTunes install. Does it go through properly this time?

  • Has anyone created a NI-VXI driver for the Ardence RTX operating system?

    Has anyone created a NI-VXI driver for the Ardence RTX operating system?
    a VXI instrument through a PCI-VXI-8335 card (in the PC) talking to a PCI-VXI-8345 card (in the VXI chassis) via MXI-3, Has anyone created a PCI-VXI-8335 card  driver for the Ardence RTX operating system?

    Now  i want  develop driver on RTX,my hard platform is similiar(PCI8335+VXI8340+1418A),and after i read the PCI baseaddress,i find PCI8335 only has memory-map,so that means if i want to driver this board ,so i take following steps list below:
    1.use Rtmapmemory() to map the baseaddress to virtual address
    2.using memset() or memcpy() to driver the 1418A board
    is this right?
    if you can give me some hints,thanks 
    or you can contact me :[email protected] 

  • Tried the posted solution for the RETR problem and it works once then it returns. How do you make the change permanent?

    Tried the posted solution for the RETR problem and it works once then it returns. Once the email dl'ds the file deleted per the instructions returns. How do you make the change permanent?

    Hi DOC808HI
    # I don't know what you mean by "posted RETR solution". Could you please post a link to the suggested solution? Perhaps you are referring to this thread: https://support.mozilla.org/en-US/questions/991792 ?
    # Anyhow any further troubleshooting information you can provide will be great e.g. Your Operating System Version (XP, 7, Mac OS X Mavericks), your anti-virus if any, your mail provider, your ISP, what you did, what happened with exact error message, what happened
    Cheers!
    ...Roland

  • Can you come out with iOS 7 for the IPod 4th gen

    If you can make iOS for I phone because iOS7 is set for
    The graphic area you can make it for the iPod 4 and under

    No. iOS 7 requires at least 512MB of RAM.
    (105566)

  • My solution for the "Error -50" and/or "Syncing" problem

    Hi
    After upgrading to iPhoto 5.0.2 I also had the "Error: -50" problem"
    How have I solved this problem => also with the help and tips from other forums.
    • Before the upgrade all my pictures from iPhoto were available on my iPod Photo (30 GB)
    • After the upgrade of iPhoto to 5.0.2 I received the "Error: -50" every time I tried to synchronize my iPod. Strange, strange, strange, ...
    => first I detected that putting pictures on my iPod starting from a folder (in stead of iPhoto) worked fine.
    Trying to change back to iPhoto did not work and no albums where available in the iPod Options view!
    => then I tried to create a new iPhoto library (press and hold Option(alt)-key while starting iPhoto), put some pictures and albums in it ... and even this did not work.
    What did I do to solve this problem!
    1. I thrashed my iPhoto application (DO NOT empty you trash, because you have to put it back again)
    2. I used "Disk Utility" to repair the disk permissions.
    3. I put back my iPhoto application from the thrash (same location as before - Applications folder)
    4. and did again a "repair disk permissions"
    5. then I tried to sync my NEW iPhoto library on my iPod and EUREKA this worked.
    6. Then I switched back to my original iPhoto library (launch iPhoto holding the Option key).
    7. Tried to sync ... again the same problem => no pictures and albums available in the iPod - Optoins - Photo tab.
    => conclusion : the problem has to be in my iPhoto library
    8. after trying many things (such as eliminating albums => trail and error method) I found the cause for my problem.
    => I used KEYWORDS in my iPhoto library with strange characters and had SMART albums using it. In my situation it was the "&" character.
    Replacing or removing this character solved my problem. All my pictures and albums were available in the iPod - Options - Photo tab
    9. Sync could be started ... Youpi!
    After synchronizing my iPhoto library I noticed that not all pictures were available on the iPod. I start looking which pictures that were missing on my iPod. When I found them I wanted to know why they were not synchronized.
    I found the explanation in the file "AlbumData.xml" in the "iPhoto Library" folder.
    If you open this file with TextEdit and search for this missing file then you'll find that (at least in my case) corresponding path does not exist (any more). And that was the case for each missing file!
    How solving this problem?
    1. I tried rebuilding the iPhoto Library => launch iPhoto holding the Option and Command keys. This did not work.
    2. What did I do?
    2.1. First I exported all my Pictures from the active iPhoto Library (Share - Export)
    => VERY IMPORTANT NOTE : all extra info such as "Key words", Albums, ... will NOT be saved!
    2.2. I created a new iPhoto Library (launch iPhoto holding the Option key)
    2.3. Then I imported all exported pictures.
    => if you check the file paths in the AlbumData.xml file, you'll see that this info is correct!
    2.4. At least I recreated (manually) all "Key words", Albums, ... so I had a duplicate of my original Library.
    I hope this also works for other people with the same problem.
    Greetings
    P@nt@ni

    Here my solution for the itunes' "unknown error -50" and not showing any albums in the prefs' tab:
    1. All rebuilding options in iphoto didn't resolve the problem.
    2. I opened the file "AlbumData.xml" in the iPhoto-Library-Folder with a text editor. I figured out, that the problem wasn't in the Albums, but in the "Master Image List"-Section. They look like this:
              <key>1741</key>
              <dict>
    .. titles, filenames, ....
    </dict>
    After making a backup of this file, I started deleting entries here (you know, the fastest way to do it is to split it always in halves and check in iTunes if the error still exists). After about half an hour I got the problem key.
    3. The problem was: Some (curious) white spaces at the BEGINNING of the comment! Curious, because they weren't visible in iPhoto's comment, but I could delete them in Iphoto! I guess they weren't normal space characters, but any special symbols (line feeds? whatever)
    4. After that, the -50 error was gone. Now I could see the Album Names. But the sync stopped after a while with a "... file not found...." - error.
    5. Again, with trial&error I found out, that 4 pictures in the last 3 months' rolls made this second problem: I just duplicated them in iPhoto and deleted the original ones. So I still don't know why they have produced this error... anyway,
    6. Now all of my photos sync well.
    .. well, the whole story took me 2 evenings. I really didn't switched to Mac to play debugger for Apple. Do they read these groups here or do I better write them anywhere? They should get those problems fixed asap! As far as I read in the groups, those errors do exist quite a long time?!
    My versions:
    iPhoto 5.0.4 (263)
    iTunes 5.0.1 (4)
    OS X 10.3.9
    iPod Nano 1.0

  • Has Apple come up with a solution to remove the iPad sidebar in Mail while in landscape mode?

    Hi, Everyone.
    When I review open Mail, I need to review it in landscape mode, so I can use the ipad cover's keyboard to type my replies. I would like to be able to hide (or even shrink) the sidebar. Unlike the "relative" privacy of viewing your email at your desk, the ipad is meant to be a mobile device: I use it on the train, I take it to meetings, etc.  It's annoying to have people looking over my shoulder or sitting next to me in a conference table able to glance over and, in effect, see the names of the last 11 people or entities that have emailed me  - with the subjects. (I work in HR, handling a lot of staff and faculty compensation, discipline, ando other politically charged issues - so privacy is kind of a big deal)  Yes, I could flip it to portrait mode and hide the sidebar, but that forces me to tilt my cover's bluetooth keyboard 90 degrees to the side and I am not yet proficient in typing sideways.
    I've seen mutiple posts over the past year about this.  I'm using IOS 8.1.3.  Has Apple resolved this or offered a suitable accommodation?
    Thank you for any replies.

    TThe answer is simple. No Apple has not implemented a way to hide the preview pane of the mail app when you use the device in landscape mode. I use my iPad in landscape mode 95% of the time as well, so that I can use the larger keys on the virtual keyboard. You can hide the preview of what the emails say I Settings>Mail, contacts, calendars>Preview>None. If you do that, at least you will be hiding the beginning of the message so that nobody can read it. I realize that's not your solution, but it might help.
    I also suggest that you leave feedback for Apple.
    https://www.apple.com/feedback/ipad.html

Maybe you are looking for

  • Transaltion in work item title not working consistently

    Hi, I am seeing a strange behaviour in SAP business workfplace with respect to the work item title (subject line) translation........................ - Some prelimenary info : All work item translations for title (subject) and work item body are comp

  • Itunes only showing my first Podcast episode

    I added my podcast feed and after approval only one episode showed up. I have now done two more episodes over the last two weeks and they don't appear in Itunes. Anyone know why? Thanks in advance!

  • Popup is not getting launched click on command link in table column value

    Hi We have a scenario where we bring the pop-up clicking on command link in the table column value. It was working fine before but from last few labels this is not working. Here is the code snippet that we are using, <af:table> <af:column> <af:comman

  • Focus under Win2k does not work correctly

    Hi, we've found out that the focus does not work correctly under Windows 2000 in Seamless Mode (App is a Windows Application running on Windows Terminal Server 2003), the same application has no problems under Windows XP, Apple Macintosh and Linux. E

  • Upgrade OES2 to OES11 Cluster

    Hi all, we plan to upgrade our 2-node Cluster running on OES2SP3 x64 to current version running on OES11SP1. The cluster provides GroupWise, File and iPrint Services and is connected via QLogic iSCSI HBA to our SAN. What would you recommend how the U