Has anyone experienced problems with Mackeeper? I did not complete downloading this software. Yet, occasionally when on the internet, I will have the MacKeeper multi-colored circle replace my pointer. How do you deal with this?

Welcome to Apple Support Communities
Don't download MacKeeper. Users complain about this app and it damages OS X. Also, Mac OS X knows how to take care of itself, so you don't need any other cleaning application that may damage OS X. See > https://discussions.apple.com/docs/DOC-3691

Similar Messages

D800 file compatibility: Has anyone experienced problems with loading D800 files onto the iPad using the camer connector kit? I have tried both RAW and JPEG using SDHC and CF cards and the iPad(3) doesnt recognise any of the files.

Has anyone experienced problems with downloading Nikon D800 files to the iPad3 using the camer connector kit? I have tried .RAW and JPEG (of various sizes) on both SD and CF cards, but the iPad doesn't recognise the files.
I have seen various forums discussing Lightroom and PSE updates that are required to process .NEF files but I can't find anything on the iPad/camera connector issue.
I dont have any problem if I put the SD card straight into the SD slot in my iMac and Aperture will process the files fine, but I would really like to be able to download and view files on the move on the iPad.
Any advice appreciated?
PS - saw something that suggested the iPad had a maximum file size of 16mb for photos, not sure if this is correct, but I have tried smaller JPEG files and they still aren't recognised.

If your camera supports both PTP and Mass Storage Device modes, it may be necessary to use both modes to import all media content.
If some files do not import as expected using one mode, try switching to the other mode and importing again.
Note: Some cameras may refer to PTP as Pictbridge or PTP/Pictbridge.

HT3529 Has anyone experienced problems sending pictures on message today?

Has anyone experienced problems sending pictures on Imessage today? Even mail has been taking a long time to receive. I work near newark airport.

Last I checked you could not access RoadRunner outgoing mail servers from outside of the RoadRunner network (i.e., the AT&T EDGE network). You can use cwmx.com as your outgoing mail server, with no ID or password, and that will work while you are on EDGE (but now when you are on WiFi).
As for junk mail, that is the scourge of the internet. Many people have many solutions - I can share with you mine. I had all my email forwarded to a free GMail account. GMail has amazingly efficient SPAM filters, and it has cut down my spam 99%. You can configure your account on the iPhone using the "Other" shortuct in such a way that emails seem to come from your Roadrunner account. The added bonus is that the GMail outgoing server works on both EDGE and WiFi, so you dont have to worry about where you are at.

Hyperlinks in cells, how do you deal with it?

I've got the hyperlinks palette open (Windows menu / Interactive / Hyperlinks)
Selecting a cell (or a table), that I would like to be clickable in a PDF, disables the hyperlinks address text field:
Obviously hyperlinks from cells are not supported.
How do you deal with it? Do you put empty textboxed on top of each cell that should be clickable?
Thanks,
Andreas

@Andreas – to choose buttons over text based hyperlinks would mean you can define the area that is responsive like you want (the size is the size of the button) and you could design different button states in different ways (color, images, what not…).
For the scripter in you: Hyperlink objects have no geometric bounds, Button objects have…
Just an idea:
Imagine a script that is scanning all cells of a selected table and if there are hyperlinks detected uses position, width and height of that cell to generate a button just on top of the cell (it could be well on a different layer above) using the information the hyperlink provides. Every time the table is changed by the user and the script is fired again, the old buttons are removed and new buttons will be built…
If there are more hyperlinks than one in a specific cell, the buttons will be built around the area the hyperlinked text will occupy…
Uwe

How do you deal with error message when downloading movie on iPad? It was 75% complete.

How do you deal with error message when downloading movie on iPad2. Movie was 75% complete.

I was using wifi. It shows as a purchase on iTunes but it does not show up on iTunes for download. I keep getting the download error with our a number attached on the iPad. Very frustrating. Apple has been of no help at all.

TS1424 Has anyone experienced problems, after purchasing an iTunes code from PayPal, in getting iTunes to deliver the code (electronically, as advertised?)

Has anyone experienced problems, after purchasing an iTunes code from PayPal, in getting iTunes to deliver the code (electronically, as advertised?)

Has anyone experienced problems, after purchasing an iTunes code from PayPal, in getting iTunes to deliver the code (electronically, as advertised?)

Anyone having problems getting CD covers to print after downloading latest software?

Anyone having problems getting CD covers to print after downloading latest software?

Lacking any responses to my initial post above, I will briefly update how I resolved this issue today.
Installed new external hard disc, 1 TB WD My Passport for Mac, and straightforward setup involving first installing current OS X operating system, then system migrator utility to rebuild the same setup as saved in latest Time Machine backup. The whole process was somewhat time consuming due to my internet connection speed and USB data transfer speeds but it went without any issues. The computer now boots up and operates identical in all respects to how it did before the problem occurred.
Regarding the internal HD of my iMac, if I now run Disc Utility to verify the disc, it reports "appears to be OK". However, viewing the disc usage in "About This Mac" window, it displays as entirely empty. Opening it in the finder also shows only a "Apple Hot News.mbox" file and a single .jpeg image, and .nothing else.
Interestingly, the Bootcamp partition of my iMac's internal HD continues to work fine and appears unaffected by the problem. I use bootcamp rarely but still will plan to set up a replacement bootcamp volume on the new hard disc soon, in order to take its place.
That the problem surfaced coincident with the software update may have been nothing more than bad luck? At this point I have no reason to suspect that the softward update had anything to do with the difficulties.

TS1362 downloaded a number of albums and songs and they did not completely download - meaning they cut off half way through each song -

Downloaded a number of songs to IPAD - they did not completely download - have bill showing I paid for them, how to I sort?

Assuming you are in a region where you are allowed to redownload your past music purchases, delete the problem tracks from your iTunes library, close and then reopen iTunes, go to the iTunes Store home page, click the Purchased link from the Quick Links section in the right-hand column, then select Music and Not on this computer. You should find download links for your tracks there.
While downloading select Downloads in the left-hand column and make sure Allow Simultaneous Downloads is unticked.
If the problem persists, or that facility is not yet available in your region, contact the iTunes Store support staff through the "Report a problem" links in your account history, or via Contact Support.
See also:
HT5085 - iTunes in the Cloud and iTunes Match Availability
HT2519 - Downloading past purchases from the App Store, iBookstore, and iTunes Store
tt2

Ok, so i downloaded three albums (sic) and discovered the next day that on two of them there were songs which did not completely download. I quickly reported it and expected a reply within 24 hrs but Ive heard nothing back and now I cannot re-report it .

ok, so i downloaded three albums (sic) and discovered the next day that on two of them there were songs which did not completely download. I quickly reported it and expected a reply within 24 hrs but Ive heard nothing back and now I cannot re-report it because it says Ive already reported it. Should I just wait? It's been three days. Thanks, mj

You can try to contact iTunes Store Support via http://www.apple.com/support/itunes/contact/
Click the big blue button and follow the prompts.
You can also try downloading the songs again. Downloading past purchases from the App Store, iBookstore, and iTunes Store: http://support.apple.com/kb/HT2519

How do you deal with weird noise when overlapping identical files in multitrack?

Sometimes when I'm editing I put two files (or two parts of the same file) "over" each other for various reasons - e.g. wanting to x-fade to a different version of the same file.
However, because the files are identical, if they are even a tiny tiny bit out of sync a weird noise is heard when they play and when they're overlapped.
I think this is called "phasing" and I know Audition 3 has phase correction tools which is great, but it seems to only correct cases where the left and right channel are out of phase in a waveform.
Does anyone have any techniques to recommend for correct this when it happens in multitrack view, apart from painstakinly moving the file a few bits to the left/right until the noise finally goes away (which takes ages and sometimes doesn't even work)?
Thanks!
Chris

If they truly are the same identical clip, then start by lining up two of them the hard way and then place markers in the clip, exactly where the next clip will line up. In other words, align the first two, and then where the second clip overlaps, place a marker exactly at the end of it, IN THE FIRST CLIP. Then, when you have to do it again, each copy clip will have the same line and you just align each new one. Hope this made sense.
There is also a feature to duplicate clips and you can choose between even spacing or just duplicate (end to end). If you calculate the distance from the beginning of the first clip to EXACTLY the beginning of the second, overlapping clip, you can input that into the option setting and it will do all the work for you...as many times over as you wish it to.

How do I continue my free upgrade if it did not complete download?

I recieved the email giving me the code to redeem for my free upgrade to Mountain Lion. I started the download, but because of a lost connection it did not complete. There was an icon in Launchpad that said paused upon reboot. When I clicked it the icon disappeared, but nothing resumed downloading.
Now with no way to resume I tried to redo the whole process, but am given a message, "This code can only be used once." when I try to download the update again.
How do I get the update now?

That doesn't help at all sig.
There is no topic that covers the free upgrade failing. The upgrade actually NEVER even showed up in the app store as downloading...only in the launchpad. Now that icon is gone and since Apple thinks I used the code for the free upgrade I can't start over even though the upgrade never finished downloading.
Next?

How to remove firefox setup3.6.8exe which did not complete downloading? Icon remains as broken file

Began download of firefox setup 3.6.8 exe. It stopped, did not complete. Icon remains on desktop as "3.6.8.exe Part, Broken File. Cannot uninstall and clear it. Can delete the icon, then it reappears when computer reboots. How can I remove the partially installed setup file? And get rid of the icon?

Try this to delete the file:
* Open the Task Manager (XP:Ctrl+Alt+Del; Vista/Win7:Shift+Ctrl+ESC) and go to the "Processes" tab.
* In the Process tab, right-click on the Explorer.exe process and select "End Process".
* In Task Manager, use: "File > New Task > Browse" and browse to the folder containing the file and delete the file via the right-click context menu.
* Start a new explorer process via " File > New Task (Run)": explorer.exe
See also:
http://ccollomb.free.fr/unlocker/ - UNLOCKER 1.8.7 BY CEDRICK 'NITCH' COLLOMB
http://www.emco.is/products/move-on-boot/features.php - MoveOnBoot
http://www.emco.is/products/move-on-boot/screenshots.php

Has anyone experienced problems with Outlook after installing Mavericks?

Has anyone else experienced problems using Microsoft Outlook after installing Mavericks? The computer seems to want to continue reloading emails.

RobertRTillman wrote:
1. Apple has removed sync services in OS X Mavericks. Therefore, you cannot sync Outlook 2011 with Contacts or Calendar.
2. Apple has removed the ability to sync through iTunes in OS X Mavericks, so that, even if you use Contacts and Calendar on the Mac, you can only sync them with your iPhone through iCloud, thus exposing all your contacts and calendar information to the mercies of the Web.
3. Microsoft does not not support CalDAV and CardDAV in Outlook, so there is no way to sync directly through iCloud, except perhaps by setting up a Microsoft Exchange account.
4. Apple makes it extremely difficult (virtually impossible) to revert to a version of OSX that is earlier than OS X Mavericks once Mavericks is installed.
In short, we are screwed and neither company seems to care.
In fact Microsoft does support Cal and CardDav in Outlook, just not in the Mac version of Outlook.
Reverting back from Mavericks requires nothing more than a backup of the system to restore from, if you do not elect to make backups that is a choice, but I would venture that it is a bad choice.

How do you deal with connection problems?

All of a sudden I'm having major connection problems with DW. I have checked my FTP settings against Yahoo's specs since that's who I host with and I've also talked to my ISP. Neither Yahoo nor my ISP can figure out what the problem is. To my knowledge I haven't changed any browser or firewall settings, but I'm having problems uploading pages to my site. I CAN connect to my site and it uploads a few pages, but then loses the connection and has to reconnect. It's also running REALLY slow, like dialup slow. I don't get any other error messages beside the fact that the connection has been lost. I did notice something in the FTP log that says No anonymous logins accepted. Is that a Yahoo thing, ISP problem or DW problem? If anybody knows how to fix this please let me know a.s.a.p. Thanks in advance for your help!

First, test out the FTP connection using a dedicated FTP client (FileZIlla/Transmit PC/Mac respectively). If you can connect and upload/download succesfully using a stand-alone FTP clieny, that means it's a Dreamweaver problem. Possible solutions: check your site settings, recreate your site by defining a new site - Dreamweaver sometimes messes up the site definitions and recreating the site definition can sometimes fix it. Or just give up on using Dreamweaver's FTP services. To be honest, Dreamweaver's FTP services have always been a bit iffy in my experience. I typically do my uploading using a seperate FTP client.

Has anyone experienced problems with outlook mail after ios6

Starting with the release of iOS6 I have had a problem with mail making it to my desktop. I never had this problem before. The mail arrives fine on my iPad and iPhone, but it's not in my ourlook inbox. Any ideas? I have the iPhone 4 and the original iPad. I have checked the settings and the "mail" option is set to "on" on both devices.

RobertRTillman wrote:
1. Apple has removed sync services in OS X Mavericks. Therefore, you cannot sync Outlook 2011 with Contacts or Calendar.
2. Apple has removed the ability to sync through iTunes in OS X Mavericks, so that, even if you use Contacts and Calendar on the Mac, you can only sync them with your iPhone through iCloud, thus exposing all your contacts and calendar information to the mercies of the Web.
3. Microsoft does not not support CalDAV and CardDAV in Outlook, so there is no way to sync directly through iCloud, except perhaps by setting up a Microsoft Exchange account.
4. Apple makes it extremely difficult (virtually impossible) to revert to a version of OSX that is earlier than OS X Mavericks once Mavericks is installed.
In short, we are screwed and neither company seems to care.
In fact Microsoft does support Cal and CardDav in Outlook, just not in the Mac version of Outlook.
Reverting back from Mavericks requires nothing more than a backup of the system to restore from, if you do not elect to make backups that is a choice, but I would venture that it is a bad choice.

Has anyone experienced problems with Mackeeper? I did not complete downloading this software. Yet, occasionally when on the internet, I will have the MacKeeper multi-colored circle replace my pointer. How do you deal with this?

Similar Messages

Maybe you are looking for