Has anyone experienced this problem: I am editing in FCP 7.0.3 on a Mac 10.6.8 - I have a clip in the browser that is full frame and matched the other clips but when I drop it in the time line it becomes a fully zoomed in version of itself

has anyone experienced this problem: I am editing in FCP 7.0.3 on a Mac 10.6.8 - I have a clip in the browser that is full frame and fine and it matches the other clips in my bins but when I drop it into the time line it becomes a fully zoomed in version of itself and I can only see a small portion of the image.  What's going on?  I've noticed this has happened in the past randomly with other clips and it's driving me cray cray!  Any help appreciated greatly and thanks in advance for taking the time

In the FCP Browser, click on the source clip that is showing up sized incorrectly to select it. Once it is selected, type Command + 9 to see the item properties for the clip. Either report those properties here, or take a screen shot of the item properties and post the screen shot here.
Next, click anywhere in your sequence timeline and then type Command + 0 {zero} to see your sequence settings. Either report those settings or take a screen shot of the sequence settings and post that screen shot here.
MtD

Similar Messages

  • My ipod Nano generation 7 shuts down unexpectedly while using the NIKE  app, has anyone experienced this problem?

    My ipod Nano generation 7 shuts down unexpectedly while using the NIKE  app, has anyone experienced this problem?

    This is not a problem I have only had with 7th gen. iPod.  I have had this problem with the 5th gen.  It goes back a few years.  Nike and Apple are aware of this.  Nothing has been done.  It appears that when the iPod voice commences (whether to update you on the status of your run) and you touch a button to prompt a mileage update or song change yourself (or even brush the device wrong when taking off a jacket), the operating system overloads and cannot sort it out.  It then shuts down and reboots.  Your mileage is lost.  So sorry.  Have a nice day.
    Love the other aspects of running with a nano (small and light weight).  I can keep it high and dry and out of the way.  Like the software.  Use it almost everyday.  Hate the unknown dropped runs.  I have logged over 2,000 miles with these devices.  Today I lost another 3 miles - probably the 30-40th time it has happened.  Frustration is somewhere between time for another device to time for another system - Map My Run indeed!
    This probably occurs with my iPod once or twice a month.  Went to the Apple Store - three times.  The first time was maybe two years ago and they first tried some magic dust and then on the second visit, they swapped out my nano - it was a bit flimsy.  The problem returned.  I then upgraded.  The problem returned.  The third time they did a reset and it seemed to help.  Then, it returned.  But to download an older software version, verify the fidelity of the UBS cable, jump from computer to computer, make a trip to the Apple store, and perform so many two steps on one leg just to get what we paid for seems . . .  well, lame.  And, Apple told us the thingy would work using all the different computers and software (Vista, Nike, etc. etc.).   
    Oh, one other thing.  The Apple Store told me to complain to Nike.  Nike said their software is fine.  This is like dealing with General Motors or the government - but, worse.  Not my problem man.  See the guy over there.  Got it.
    I note that no one from Apple is jumping in the chain here with a fix.  So much for customer exuberance.  Generally like Apple.  We have about 20 Apple devices in our family (desktops, portables, phones, pods, tablets) and are lining up for the watches . . .  but, maybe Apple is an idea who time has come and gone, . . . like the wind. 

  • I have an iPhone 5 and email that is being deleted from trash is reappearing in trash a few minutes later.  Has anyone experienced this problem?

    I have an iPhone 5 and email that is being deleted from trash is reappearing in trash a few minutes later.  Has anyone experienced this problem?  Any suggestions as to how to correct it?

    Connect the iPod to your computer and look at the storage used by the various categories as shown in the colored bargarph in iTunes.
    Come back with the results.
    An "other" larger than about 1 1/2 GB indicates corrupted files.
    What is the Other on my iPhone and How to Remove It
    What is "Other" and What Can I Do About It?
    Also, go to Settings>General>Usage>Manage Storage and see what is using the storage

  • Dreamweaver 2014 won't launch in Mavericks... has anyone experienced this problem?

    I downloaded the new 2014 version of Dreamweaver today & it won't launch in Mavericks... also dowloaded it to my PC & that works OK. Has anyone had this problem?

    Hi Harald,
    Looks like this is happening because of some issue during installation of the product.
    Can you try the following:
    1. Un-install DWCC 2014. Note: Before un-installing, I would suggest you to backup any user preferences files, extensions or site settings.
    2. Log out from your Adobe ID login in creative cloud.
    3. Log-in back again and then download and install the product.
    I am suggesting it since the same process helped one another user. Hence seeing if you are also encountering the same issue.
    -Arun

  • My iPhone 4S rings once and goes to voicemail after the os 7 update. Has anyone experienced this problem? How do I fix it?

    I updated my fully functional IPhone 4S to OS7. Now when someone calls it rings once and goes to voicemail. Has anyone had this problem? How do I fix it? And yes I have restored my phone and reloaded it twice, still *****. It has turned into a Microsoft product.

    Perform a Reset... Try again...
    Reset  ( No Data will be Lost )
    Press and Hold the Sleep/Wake Button and the Home Button at the Same Time...
    Wait for the Apple logo to Appear...
    Usually takes about 15 - 20 Seconds... ( But can take Longer...)
    Release the Buttons...

  • Has anyone experienced this problem?

    I have created a form in 4.5.
    It has one window, this window has a content view and a stacked view.
    I use set_view_property to show the stacked view when an event is triggered.
    My problem is I can see the stacked view canvas but not the text on it.
    any help is appreciated?

    From what I understand the driver updates are included in the OS update.  Just keep checking for the latest.
    With a windows machine one goes to the GPU manufacturer and downloads it directly.

  • Has anyone experienced this problem connecting to iTunes Store

    When attempting to download content from the iTunes StoreI receive an error message, saying that there is a problem with this download,"an unknown error occurred [-1303]" 
    I experience the same problem downloading podcasts to which I subscribe via iTunes.
    Apple have confirmed the network connection to Store is fine.  I click Check for Available Downloads, the content attempts to download and then I get the same error message "there is a problem with downloading your items".   I have removed and reinstalled the latest version of iTunes, but no luck.
    The problem has now got worse, as it seems the entire iTunes installation on my system is causing problems.  The tracks in my iTunes Library do not play.  I have Apple TV in my living room, but it cannot now access any of my AV content stored in my iTunes library.   I also have Sonos music streaming system, which has lost contact with the music stored in my iTunes library.
    I have iTunes v.10.4.1.10 installed.  My ISP is Virgin Broadband with a cable modem.  I have the XXL high speed broadband package with up to 50mb.
    Clearly there is something wrong here with iTunes, not the content I am trying to access.  Can anyone help?  Thank you, russell 1402

    Russell...
    I also have Sonos music streaming system, which has lost contact with the music stored in my iTunes library.
    Might be help for error 1303 for you here >  https://discussions.apple.com/thread/1354006?start=0&tstart=0

  • I redeemed a $15 iTunes gift card, but iTunes won't let me download anything. It keeps asking to sign in for billing and I do, but it says security code is invalid on debit card, when it's not. Has anyone experienced this problem?

    Hi. My name is Kim. I was wanting to know if anyone has gone through similar experience. I redeemed a iTunes gift card that was given to me. I'm told by iTunes store to sign in which I do, but then it takes me straight to billing I enter the correct three digit security code, then what happens it tells me invalid Cvv. Could someone please tell me this what does my debit card have to do with my having a redeemed ITunes card to use, and why doesn't let me download my music. I use a iPhone 3GS. Thanks

    Hi Kim ...
    Might not just be the security code > iTunes Store: My credit card's security code or zip code does not match my bank's records
    Apple "verifies" your billing credentials with every transaction.
    what does my debit card have to do with my having a redeemed ITunes card
    If the total purchase price of the media including any applicable taxes or fees exceeds the balance of the redeemed card, then the difference is charged to your debit or credit card account.
    iTUNES STORE - TERMS AND CONDITIONS  <  re taxes and fees
    You don't have to have a credit or debit account setup >  Create an iTunes App Store account without a credit card

  • TS1368 When I enter my iTunes redemption code, I get a message that says, "The store is unable to access your account information. Please try again later." Has anyone experienced this?

    When I enter my iTunes redemption code, I get a message that says, "The store is unable to access your account information. Please try again later." Has anyone experienced this?

    I got the same message qhen using iTunes thru my computer. With the same gift card i got the message that the card had already been redeemed.  I tried 3 different brand new cards. All the same. Contact the support is advice I got.

  • I cannot find the next and previous button in iTunes get info menu? Is there anyone that has also experienced this problem that can help me please

    I cannot find the next and previous button in iTunes get info menu?
    Is there anyone that has also experienced this problem that can help me please
    I have the lates version of Itunes

    I have managed to figure out how to solve this problem, after looking around I saw a lot of people kept saying makesure it is list view however this still did not work, I found the only way for me get these buttons back was to change the Movie to a TV Show and only then did the "Next" and "Previous" button appear. Right Click> Get Info > Options > Media Kind and then Select TV Show, this is extremely inconvienent but the only way that I found that has worked so far.
    Hope this works for you too!!

  • IPad (III) dies 4 weeks after Applecare ends. Has anyone experienced this?

    One of my iPad (III)'s "bricked" when I proceeded to update to the latest version of iOS 7. It just displays an iTunes logo and a picture of the adapter plug. Wjen I plugged it to my MBP and iTunes, I got the message that the iPad must be "restored" and there is no S/N displayed.
    It also happens to be about 4 weeks after the Applecare expired.
    Has anyone experienced this behavior?
    Thanks for your help.
    Naresh

    Just an update on my issue with the iPad.
    I observed a problem syncing my other iPad getting some error code -50. After a search on-line and the Apple Support I found a suggestion to change the USB - 30 pin cable then retry.
    With that change, my problem in syncing my other iPad went away.
    So I tried the same with the first iPad. Presto. I was able to restore the iPad with current operating system software then get all the apps etc. back.
    Still no answer why the first iPad went into a "retore" mode after "upgrading" to iOS 7.1.1.
    But lesson learnt, when having a connectivity problem, check cable as one of the items.
    Thanks again.

  • IPhone 6 recently stopped ringing and making text alert sounds since most recent upgrade to ios 8.1.1, has anyone experienced this, and if so, how did you correct?

    AFter recent upgrade to ios 8.1.1, my iphone 6 no longer makes text alert sounds and ring does not sound for incoming calls (except on car bluetooth).  has anyone experienced this, and if so, how did you correct?

    I had the same problem until tonight. Played with ring tones, do not disturb, volume, and everything else posted. What I found is that when you go to sounds/text tone, there are two types of tones in the scrolling menu. The top set of tones are for alert tones and the bottom set are ringtones. They are separated by a gray bar that states their purpose. Many of the tones are the same name. You need to set your text alert in the Ringtones and reminders, alarms, and such in alerts. The weird thing about this menu is when you go to sounds/ringtone the menu is reversed. Mine works in locked mode or unlocked now. I have an Iphone 6 8.1.2. My problem started after my latest OS upgrade. Hope this helps.

  • I am trying to register my iPhone 4S for mobile phone insurance but the website does not recognise the serial number. Has anyone experienced this?

    I am trying to register my iPhone 4S for mobile phone insurance but the website does not recognise the serial number. Has anyone experienced this, and any idea how I can rectify the problem?

    When using the iPhone with the Windows OS, you need to have the Apple Mobile Device Service running. It should start automatically when you start the computer, but sometimes things happen. Use this support document to try and restart the service. See if that helps.
    http://support.apple.com/kb/TS1567

  • My screen keeps blowing up to giant size. I cant get to the slide to turn it off.  Has anyone had this problem?

    My screen keeps blowing up to giant size.  I can't get to the slide to turn it off then. Has anyone had this problem?

    It would seem you have enabled Zoom. Go to Settings>General>Accessibility>Zoom>OFF.  I would also disable Triple-click Home, again in  Settings>General>Accessibility>Triple-click Home>OFF to prevent it happening again.
    Message was edited by: The Huntress
    Message was edited by: The Huntress

  • Elements fails to connect to iphone 5.  has anyone fixed this problem?

    each time I connect iphone to the computer, the photo downloader cannot connect to the phone and fails to upload any photos.  It simply gets stuck trying to connect and never connects.  Has anyone had this problem and have you fixed it?

    Hi c44sman,
    Leaving PSE out of the picture, temporarily, do your devices show up in Windows Explorer and can you copy images from them to a folder on your computer's drive?
    First you want to disable the Photo Downloader. To disable the downloader, find the little camera icon on the bottom right hand side of the Windows taskbar, right click on it, and you should be given the option to disable it.
    Next, click on "Start" on Windows task bar, open the "All programs" list, find "Scanner and Camera Wizard" in "Accessories." This program - Scanner and Camera Wizard - will be the default program you use to download photos from iphone to computer. Every time you connect your iphone with your computer, you should be given a dialogue window where you can pick the "Scanner and Camera Wizard" program to download the photos. Once selected, the program will take you through a step-by-step wizard to download the photos. Within the process of downloading, you can select folders or create a new folder for the photos. In my opinion, making a new folder makes it easier to import them altogether into photoshop organizer where I usually do the "Smart Fix" for all the photos.
    Once you have the photos downloaded, open up Photoshop's organizer interface, go to "files," and then "Get photos and videos." Here you will select "from files and folders." Locate the folder where the photos are stored, and then import them directly into Photoshop. Now, you should be at where you usually land if the photo downloader was working properly.
    Also do check if you have updated the software to te latest patch.Go to the Editor menu and click:
    Help >> About Plug-in >> Camera Raw
    You should see a pop up with the version number.
    Press Esc to close.
    Help >> Check for updates
    to install the latest patch.

Maybe you are looking for

  • FTP filename changes

    Hello,   In a FILE to FILE scenario we would like to change the name of the file. let's say filename on the sender side is 'datafile' and we would like it to be 'infodatafile' on the receiver side. So add the 'info' string to the filename. Anybody kn

  • Could not create an new account for use

    Last night I logged in with my AppleID to make a post. As it was the first time, I had to create an account/profile in order to do so. But that was not possible using 10.6.6 and the latest Safafi. What happened was this : Name: AppleID: Log out of th

  • Class Not Found: JDBC driver org.postgresql.Driver could not be loaded

    Hi I got the below message when i ran TORQUE Class Not Found: JDBC driver org.postgresql.Driver could not be loadedPlease let me know why this error arise.i have added the necessary postgresql.jar file in the classpath but still the error persist. Re

  • Use of MapTool on environment with no internal network

    Is it possible to use MapTool on an environment with no internal network? All nodes are directly linked to the internet 

  • CS4 install from desktop failure - error code 1612

    I have a problem with DreamWeaver in CS4 which I've tried to correct using a desktop install. That's where I received the error code 1612. The problem in DreamWeaver is: that the properties panel in cs4 DreamWeaver doesn't completely display. the sec


HashFlare