Has anyone figured out how to make the Yamaha 01V96i mixer work with Logic 9.1.8

Has anyone figured out how to make the Yamaha 01V96i mixer work with Logic 9.1.8 as a control surface ?

In YAMAHA01v96i:
Go to DIO/SETUP select Generic DAW. Go to MIDI settings page and set the desired port (personally I use Number 1), Select the same audio frequency you use in your DAW (I use 44.1KhZ)...at this point You should save a scene in you 01V96i to avoid to repeat all the procedure again.
Open studio manager, go to patch and set the input port from 17 to 32 respectively to USB1-USB16 (this will give you the return from you DAW to the 01v96i
Save again the scene overwriting the old one.
in LOGIC
Click on preferences, select Audio then select 01v96i, then click on control surface and select Mackie design Baby HUI and in the midi session set the same port that you've been setting on the Yamaha 01V96i (Port 1 if you follow this example).
That's more or less it.
It worked for me...so far

Similar Messages

Has anyone figured out how to limit the number of emails displayed in the mail app?

There used to be a setting in Mail, Calendar, Contacts that would let you set the number, starting with 50 emails. I can't find this setting in iOS 7.

I do not know why one cannot use an artboard
in Illustrator it looks like this
In Photoshop it looks like this
As far as I can determine it has cropped the area properly as before, please explain what is missing?

Has anyone figured out how to stop the 1022 from killing the spooler?

It used to be that when I'd print a PPT the spooler would crash and then none of my devices/printers worked. I never happened when the 1022 was unplugged.
Now, the 1022 kills the spooler as soon as I install it. I've see a number of discussions but no solution yet. I could really use some help.
Thanks.

Not yet....
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

Has anybody figured out how to fix the battery consumption with mountain lion (using a MBP 13")?

I upgraded to Mountain Lion, and yes despite all of the warnings posted in the App Store reviews about the battery life being cut in half, I upgraded my MBP anyway. Chalk this one up to the Black Cloud of "I Told You SO!" My MBP could hold a charge for almost 6.5 hours. Now I'm luck if I can get 3, but in most cases I may get 2.5 hours if I'm conservative.
Has anyone figure out how to fix this battery problem? Even now after having it unplugged for almost 2 hours...I'm getting the "You are now running on reserve battery power" message. What a freaking joke!
Any help would be greatly appreciated!

Open /Applications/Utilities/Activity Monitor. Click %CPU until the triangle points down beside it. Make sure it says All Processes in the upper right. Check for applications taking up lots of CPU time.

Has anyone figured out how to get speech recognition working with sticky keys enabled on mountain lion?

I'm trying to use speech recognition to input text on my iMac running the latest mountain lion, 10.8.3.
I have sticky keys enabled.
When I try to start speaking by pressing the function key twice nothing happens. I can only get it to work if I disable sticky keys.
The same problem occurs with all the other modifier keys as shortcut, they do not work with sticky keys.
When I try to select a different shortcut, I am unable to select a two key combination, but am limited to one.
If I select the F6 key, or any other single key, I am able to start speech recognition. However the second time that I press the key, it does not stop recognition and process my words. Instead, it restarts the recognition.
Has anyone figured out how to get speech recognition working with sticky keys enabled?
Or a way to get an individual key shortcut to start on the first press and process it on the second?
Or a way to get key combinations to work, as specified by the help:
Dictation On and Off
To use Dictation, click On.
When you’re ready to dictate text, place the insertion point where you want the dictated text to appear and press the Fn (function) key twice. When you see the lighted microphone icon and hear a beep, the microphone is ready for you to speak your text.
Shortcut
By default, you press the Fn (Function) key twice to start dictation. If you like, you can choose a different shortcut from the menu.
To create a shortcut that’s not in the list, choose Customize, and then press the keys you want to use. You can press two or more keys to create your shortcut.

I noticed with version 10.8.4 of OS X that I am now able to select F6 to activate, and the return key to complete the speech recognition. This is still different than the description of how these should function that's included in the help, but at least it's an improvement.

Has anyone figured out how to scan from an HP officejet Pro 8600 after upgrading to OS 10.9.4

Has anyone figured out how to scan to a MacBook Pro with 10.9.4 from HP officejet Pro 8600?

iMovie acts as it does, I suspect, because it's so much safer (and easier) to program.
As iMovie is now structured, each clip has a startFrame and an endFrame. They show the starting point and ending point of that clip in its source file. There's only one of each. Simple.
For us to remove a portion of the middle without splitting the clip in two, iMovie would have to allow each clip to have multiple start/end points. So iMovie would have to "remember" that the clip starts playing at frame 100, stops at frame 120, starts again at frame 150, stops at frame 200, and so on. Very complicated.
The amount of data that would be required to undo a change, for example, could become quite large, and be very, very complicated. Lots of opportunity for errors. Imagine what iMovie would have to "remember" if we could remove the middle, added a title to the clip, remove part of the title, then split the clip and applied a slow motion effect to the second part of the split.
This way is simpler, and not all that inconvenient for users, in my opinion. I prefer simple when it adds to reliability.
Karl

Anyone figure out how to solve the 1015 error

anyone figure out how to solve the 1015 error

Each version of Photoshop has its own installation path therefore a different application as fars as Wacom Configuration. You would need to set preferences for each Photoshop installed on your system. However if you know XML. Wacom Tablet Preference File Utility can save your Wacom preferences into an XML file. That you may be able to duplicate a Photoshop install and the change the Photoshop Path. Or just change the prion version pathe the the new Photoshop path then restore your Wacom Preferences using the modified XML preference file.
Here you see part of my wacom preferences I have set preferences for all Photoshop installed on my workstation.

Has anyone figured out how to read pdfs online when message says Internet Explorer stopped working?

I can't open any links to a PDF from within a website. Has anyone figured out how to fix problem of not able to read pdfs online? I get message that says I"nternet Explore has stopped working". ANY ideas?
Message was edited by: base1fan

Hi,
It may be that you will need to 'reset' Internet Explorer, but you can certainly check if this issue is being caused by an add-on as follows.
Click the Start Menu, open All Programs, open Accessories, open System Tools and click on 'Internet Explorer (No Add-ons)'. See if Internet Explorer now runs correctly.
Let me know.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

Has anyone figures out how to calculate "Duration" in iWork 08' yet?

I'm trying to now take all the entered days - and there respective total time in hours:minutes, and sum for one grand total in hours:minutes...
has anyone figured out how to do this in 08' yet? It would be extremely helpful!

Go to :
http://discussions.apple.com/thread.jspa?messageID=7958365
Yvan KOENIG (from FRANCE jeudi 18 juin 2009 21:49:05)

I cannot figure out how to make the text larger on an incoming email. The finger method doesn't work and I cannot find any toolbar with which to do it. I could find nothing in settings also. Plese help and thank you.

I cannot figure out how to make the text larger in a received email. The finger method doesn't work and I can find no tool bar as I can for composing emails. I can find nothing in settings. Please help and thank you in advance.

Hi there,
Download a piece of software called TinkerTool - that might just solve your problem. I have used it myself to change the system fonts on my iMac. It is software and not an app.
Good wishes,
John.

The window displaying bookmarks is too large (suddenly happened with the new version). I can't figure out how to make the display smaller. Zooming out does not work on the bookmark menu display.

I have version 4, just downloaded, and a Mac w. OS 10.6. 7.
The bookmarks display (when I pull down "bookmarks") is much too wide. I can't figure out how to reduce the display size. The window is not persistent so I can't even get you a screen shot.
Thanks, Sara

It seems there was a change in Firefox 4 where the width of the drop-down is now determined by the length the longest bookmark name in the folder being displayed. Previous versions of Firefox would shorten a long name like that and add an ellipsis to signify the name was truncated.
Sorry, I don't know how to change that other than to advise you to edit the name of that long bookmark name and make it less verbose. Just scroll down the list of bookmarks in that wide folder until you see the culprit, then right-click that bookmark and open Properties & edit the Name line at the top of that dialog.

After uploading IOS7, all text turned white and is very hard to see. I can't figure out how to make the text black again.

After loading IOS7, text turned white. Very hard to read. Cant figure out how to make it black again. Thanks for any help.

chflags -R nohidden /path/to/folder/

Has anyone figured out how to indent when using the iPad keyboard?

I am using iPad for meeting notes, but can't seem to figure out how to tab or indent when typing.

In notes all I can figure out is to put a space or two at the beginning of each line but in pages if you touch the paintbrush at the top right corner and then list, there's an indent button. In notes sometimes I'll use a – to help delineate the indent.

I am trying to send iTunes content from my MBA to Samsung LED SmartTV (7500) using DLNA. Has anyone figured out how to do this?

I recently purchased a Samsung LED SmartTV (7500) and am trying to watch TV Shows purchased from iTunes wirelessly. I know the WLAN connection is setup properly for the TV and MBA individually. I thought DLNA was supposed to setup the peer-to-peer link between these two devices. Do I need to download some special software to enable this on the MBA? Has anyone else managed to get this to work?

iTunes does not support DLNA. If your TV works only with a DLNA server, you'll need to find one for Mac that supports wireless connectivity and that can either read your iTunes library files or just access the track files. Otherwise, as Chris suggested, an Apple TV is another option and probably would be a lot easier to set up and use with iTunes.
Regards.

Has anyone figured out how to use EventCombMT to do "text" searches of server event logs? I doesn't seem to work.

I know I can do this in powershell, but gosh I don't need a complex powershell script to do what this eventcombmt gui does so easily for quick searches. I just wish I could figure out why text based searches of logs. For example, suppose
you want to search events for a user a server may have logged, if I type in "user1" nothing is retrieved and yes it's there. Searching for events works flawlessly but I can't seem to get text based searches to work.

Hi,
Based on my research, if we want to filter events based on user name, we need to edit the XML query.
Please refer to this blog below:
Advanced XML filtering in the Windows Event Viewer
http://blogs.technet.com/b/askds/archive/2011/09/26/advanced-xml-filtering-in-the-windows-event-viewer.aspx
Best Regards,
Amy

Has anyone figured out how to make the Yamaha 01V96i mixer work with Logic 9.1.8

Similar Messages

Maybe you are looking for