Has anyone fixed the Headstart libraries for Forms 11 ?

I have a 100% generated Designer - Forms application using the %65.pll headstart libraries - the so-called Headstart version 6.5i.
Currently our production environment is running on Oracle Application Server 10.1.2. It works fine, however, because of several reasons (the underlying Oracle Portal environment is not working properly anymore on Internet Explorer 10) and continuous alerts that our customers may not use Java 6 and should upgrade to Java 7, we have to migrate to 11g.
We have installed Fusion Middleware 11.1.1.6, upgraded Portal and recompiled all Forms modules and libraries. Also the Headstart libraries compiled ok. However, when we start a form we get the message that it has been created with an older version of Forms and it quits.
The consequence is that i have to migrate the Forms as well with the tool frmplsqlconv. Sadly that fails on the Headstart libraries. For example these errors occur:
CG$MESSAGE: The String CALL was found. If it is an occurrence of the Forms Built-In, It should be replaced with CALL_FORM.
CG$_SHOW_KEYS: MENU_SHOW_KEYS changed to SHOW_KEYS
CG$_PREVIOUS_MENU: The PREVIOUS_MENU Built-in is obsolete and will not compile.
CG$_HELP: The MENU_HELP Built-in is obsolete and will not compile.
CG$_EXIT: The EXIT_MENU Built-in is obsolete and will not compile.
CGNV$FIRST_NAV_ITEM: BREAK changed to DEBUG.SUSPEND
Does anyone have Headstart libraries with fixes for these errors?

Hello Mark,
the problem has been fixed...
1) I tried to migrate the forms to 11g, but that can not be done with headstart... The fmb/pll files should be kept on 10g.
2) The migration documentation is not complete: webutil has been installed completely (in other words, webutil is not migrated)
So, steps are:
1) Install webutil
2) Recompile all libraries (including headstart and webutil)
3) Recompile all menus
4) Recompile all forms
Then the Forms application works again.
Java 7 update 21 is very dramatic. The "vendor" work-around can not be used anymore, like with previous Java 7 versions... It is unbelievable how amateuristic Oracle deals with Java. For me, Java in the client is dead as long as Oracle has the controls. So, the end of Forms is very near. If you are also looking for alternatives, check theformspider.com.
Thanks for your help.
Best regards, Jan Willem Vermeer

Similar Messages

Has anyone fixed the following droid razr problems:

Has anyone fixed the following droid razr problems: 1. the phone won't let me answer calls, if the answering screen shows up it takes 5 rings; 2.It takes about 4 attempts to end a call, half the time I have to wait for them to hang up; 3. GPS will stop and freeze; 4. phone freezes doing simple tasks; 5. It won't flip through easily; 6. slow (deleted texts and photos and still slow); 7.deleted apps still show on phone; 8. battery life is about 3 hours if used constantly; 9. some people cannot call me; 10. typed text takes a very long time to appear on the phone.

Try this:
Wipe Cache Partition - DROID RAZR / RAZR MAXX by MOTOROLA
Performing a wipe cache partition will remove any temporary files that may be causing an issue with the device. All personal files and settings will not be affected by this option.
Power the device off.
Press the Power button then select Power off.
If the device doesn't respond to input, press and hold the Volume Up / Down then press and hold Power button. When the device screen goes blank, release the Power button while continuing to hold Volume Up / Down then proceed with step 3.
Press and hold the Volume Up / Down then press the Power button.
When presented with the Boot Mode Selection Menu, release all buttons.
Press Volume Down to select Recovery then press Volume Up.
From the Droid triage screen:
Press and hold Volume down.
Press and release Volume up.
Release Volume down.
Select wipe cache partition then press the Power button.
Use Volume keys to navigate options.
Select reboot system now then press the Power button.
Use Volume keys to navigate options.

Has anyone received the new update for the X6?

has anyone received the new update for the X6 with the updated browser? what is the firmware version?
Greece Nokia X6 RM-559 v40.0.002

I agree with Vinimutta!!
*slide to unlock with digital clock & sms & missed call notification
*support for homescreeen widgets
*qwerty keypad in portrait mode
every single update so far was pathetic attemp to fool us and make us happy.
there is no change at all from v30,31, and 32. exect the slightly smaller font for text input in v32.
nokia promises alot in the new update, (browser, smiler and map)
hope it leaves up to the expectation and include the portrait qwerty,homescreen and lockscreen.
Why is it so hard to implement?
slide to unlock and homescreen is already available in c6, and the portrait qwerty is available in 5800.
its no like we are asking for impossible like continuous autofocus for video recording!!

Has anyone gotten the new update for windows phone 928

Anyone gotten the new update for windows phone 928

You don't have to wait, you can get it now.
Get Windows Phone 8.1 now legitimately!

Has anyone tried the GSP covers for MacBook Pro?

I am about to buy a 15" MacBook Pro & 3G iPhone and want to protect my babies Has anyone bought the clear skin from the SGP store? Any reviews? They also have a keyboard cover that's half the price of the Moshi one and looks identical to me. The SGP store address: www.sgpstore.com

Congrats !
Here's some information from research done in the past few days. BEST Keyboard protection:
Keyboard cover that is thin & fits the keys is called u-cover from a company called uniea. Also, youtube: "marware protection" or youtube: "macbook pro protection", you'll find the marware product which i liked, it covers the track pad and wrist area.
There are many choices out there, I like to find the youtube reviews and/or thorough articles that review the product over several months of usage.

Has anyone populated the doc_flow details for an ORDERS05 IDOC?

I am having trouble understanding what needs to be populated in the doc_flow itab of line type CRMXIF_DOC_FLOW_I.
In my case I am trying to populate the doc flow with CONSIP (customer reference contract) details. I can work out what field 'RELATION_TYPE' is and can see that it needs to have a value of 'VONA'. This one is easy to identify because of the 4 character field definition, but I can't work out what goes in the relobj_roletype, relobj_objkey, relobj_type, or the relobj_object_id fields. Can anyone be of help here. I have been trying a number of different values, for example, I populated the relobj_roletype field with 'BUS2000135' which is the object name for a 'CRM Customer contract', but that was rejected and resulted in a status 51 being set in the IDOC.
Blue

Stephen,
I agree with you, but you try and get a VAN to supply IDOC related details in the complex data structure format. They can do it but they're not at all happy about it and go to great lengths to avoid, whereas the ORDERS05 is a standard that most already output to.
I can process ORDERS05 type IDOC's okay, although I had to add my own code to process a few segments. Anyway, the orders are being created okay. I did initially have a problem when blocking an item, based on certain checks perfromed in the BADI, but that has now been resolved. My only other problem, which a support message has been raised with SAP about, is to parse back status messages to IDOC. Again, there's a BADI which allows you to add content, but there's a mismatch in parameters between the FM and BADI. I'm sure they'll sort it out.
The only thing left now is to get the item level doc flow to update when pointing to customer reference contract. Again, it's just a case of reverse engineering the data from the IDOC created by the CRMXIF_ORDER_TEST program.
Regards
Dr Sidewalk

Has Anyone sent the iphone in for repair for the low volume issue ???

I called apple last week and spoke with a level on support agent. After he could not solve the volume issue they sent me to level two. the level two tech took the call and told me right away that they were going to send me a new phone. I give him my credit card as a deposit so they would send a new phone and when I had the new phone I could then send the old one back. Well after a few days I called to check on the phone and found out he never placed the order and now they say they want to send it for repair some place in Texas. They did offer the rent me a phone for 29.00 while I wait for repair. I told them no rental for me. How bad is that, a hardware issue and they say they are going to send a new phone and never do then they offer a repair and to rent me a phone. I was wondering if anyone had sent in the phone for this issue yet. I do not think I am going to send it in and I think I am going to get my refund while I still can. I just thought I would check to see if anyone had sent the phone in for repair yet and how it worked out.
Andrew

How are any of us (Apple users just like you) supposed to have any idea?
We weren't there. We don't know the specifics of what happened to your iPhone.
Ask the store that repaired it.

Has anyone fixed the safari / flash 9.1.1.5 problem yet?

I can't pinpoint exactly when it started happening but after many months of trouble free browsing Safari suddenly started having a problem with many websites containing Flash content. Whenever we go to such a site (e.g. CBBC or Nokia N Series) Safari hangs and we get the dreaded spinning beachball. When this happens even Force Quitting doesn't recover the problem and we have to shut the MacBook down with the power button - very worrying.
I've followed many of the othe safari threads and tried the following without any joy:-
- uninstalling flash (using the official uninstaller) and re-installing it
- Using firefox and camino instead of safari - they both seemed to suffer the same issue
- repairing permissions
- emptying caches
- adding virus protection (random desperation!)
Can anyone provide any insight an a solution please?
Many thanks
The Welshman

Sorry to hear that you have crashing issues with Safari. Most people don't.
If your Safari keeps crashing, or if you are updating Safari (or just have):
Input Managers and other plug-ins from third parties can do as much harm as good. They use a security loophole to reach right into your applications' code and change that code as the application starts up. If you have installed 10.4.11 and Safari is crashing, the very first thing to do is clear out your InputManagers folders (both in your own Library and in the top-level Library), log out and log back in, and try again.
So, disable all third party add-ons before updating Safari, as they may not have been updated yet for the new version. Add them back one by one. If something goes awry, remove it again and check on the software manufacturer's website for news of an update to match your version of Safari. Remember: Tiger up to 10.4.10 used Safari 2.0.4 or, if you downloaded it, Safari 3.0.3 beta. Safari 10.4.11 uses Safari 3.0.4 which is not a beta. If Safari 3.0.4 on 10.4.11 is not the fastest browser you have ever used, then something is wrong!
(Trying to revert to Safari 2 when running 10.4.11 can have repercussions, as Safari 3.0.4 uses a completely different webkit on which other applications like iChat, Mail, Dashboard widgets etc also rely.)
Most errors reported here after an update are due to an unrepaired or undetected inherent fault in the system, and/or a third party ad-on. Add-on that have been frequently mentioned here, among others, for causing such problems are Piclens, Saft, AcidSearch and Pithhelmet. If you have them, trash them and go the developer's sites to see if new versions are available for Safari 3.0.4.
You should also ensure, if you are running Tiger 10.4.11, that you have downloaded and installed the correct version for your Mac of Security Update 2008-001.
As Leopard also uses Safari 3.0.4, much of the above may well also apply to Leopard, but is not guaranteed.

Has anyone used the appscript modual for python rather than streight AS?

I just discovered appscript and so far I like what I see. has anyone used it?
Does it just wrap around actual applescript commands which it then sends to osascript with a system call or does it use the message system directly? Is there anything that it has not yet implemented that might cause problems?
To me it seems to be a perfect solution to the clutter that AS seems to be... at least from someone coming from more traditional languages.

In startMovie, you need to register the xtra
on startMovie
axRegister(serial code here)
end
Then, on your Record Button, something like this:
on mouseUp me
--start recording session - using 400k as maximum here
errOpen=axOpenRecorder(400000)
--see if there is an error
put errOpen
--save the new audio as a file
errRecord=axRecordSoundToFile("soundName","c:\path\to\soundfile.wav")
--see if there is an error
put errRecord
end
then make sure you close the recorder in stopMovie
on stopMovie
axCloseRecorder()
end
You can also make a Stop Recording button that has code like
this:
on mouseUp me
errStop=axStopRecording()
put errStop
end

Has anyone fixed the ringer issue with 4s?

I have tried the alcohol, the compressed air to clean the connection, the verification that the ringer tone is still available... anyone?

Sorry to hear that you have crashing issues with Safari. Most people don't.
If your Safari keeps crashing, or if you are updating Safari (or just have):
Input Managers and other plug-ins from third parties can do as much harm as good. They use a security loophole to reach right into your applications' code and change that code as the application starts up. If you have installed 10.4.11 and Safari is crashing, the very first thing to do is clear out your InputManagers folders (both in your own Library and in the top-level Library), log out and log back in, and try again.
So, disable all third party add-ons before updating Safari, as they may not have been updated yet for the new version. Add them back one by one. If something goes awry, remove it again and check on the software manufacturer's website for news of an update to match your version of Safari. Remember: Tiger up to 10.4.10 used Safari 2.0.4 or, if you downloaded it, Safari 3.0.3 beta. Safari 10.4.11 uses Safari 3.0.4 which is not a beta. If Safari 3.0.4 on 10.4.11 is not the fastest browser you have ever used, then something is wrong!
(Trying to revert to Safari 2 when running 10.4.11 can have repercussions, as Safari 3.0.4 uses a completely different webkit on which other applications like iChat, Mail, Dashboard widgets etc also rely.)
Most errors reported here after an update are due to an unrepaired or undetected inherent fault in the system, and/or a third party ad-on. Add-on that have been frequently mentioned here, among others, for causing such problems are Piclens, Saft, AcidSearch and Pithhelmet. If you have them, trash them and go the developer's sites to see if new versions are available for Safari 3.0.4.
You should also ensure, if you are running Tiger 10.4.11, that you have downloaded and installed the correct version for your Mac of Security Update 2008-001.
As Leopard also uses Safari 3.0.4, much of the above may well also apply to Leopard, but is not guaranteed.

Has anyone run the connection pooling for mysql & tomcat successfully?

I'm trying to set up connection pooling. I'm following the how-to page at
http://jakarta.apache.org/tomcat/tomcat-4.1-doc/jndi-datasource-examples-howto.html
But when i test the DBTest/test.jsp file, tomcat displays an error =
could not load jdbc driver class 'null'(msdos)
i have placed all the required .jar files in the tomcat lib.
below is the cofiguration i did to the server.xml file



<Server port="8005" shutdown="SHUTDOWN" debug="0">

<Listener className="org.apache.catalina.mbeans.ServerLifecycleListener"
debug="0"/>
<Listener className="org.apache.catalina.mbeans.GlobalResourcesLifecycleListener"
debug="0"/>

<GlobalNamingResources>

<Environment name="simpleValue" type="java.lang.Integer" value="30"/>

<Resource name="UserDatabase" auth="Container"
type="org.apache.catalina.UserDatabase"
description="User database that can be updated and saved">
</Resource>
<ResourceParams name="UserDatabase">
<parameter>
<name>factory</name>
<value>org.apache.catalina.users.MemoryUserDatabaseFactory</value>
</parameter>
<parameter>
<name>pathname</name>
<value>conf/tomcat-users.xml</value>
</parameter>
</ResourceParams>
</GlobalNamingResources>


<Service name="Tomcat-Standalone">


<Connector className="org.apache.coyote.tomcat4.CoyoteConnector"
port="8080" minProcessors="5" maxProcessors="75"
enableLookups="true" redirectPort="8443"
acceptCount="100" debug="0" connectionTimeout="20000"
useURIValidationHack="false" disableUploadTimeout="true" />




<Connector className="org.apache.coyote.tomcat4.CoyoteConnector"
port="8009" minProcessors="5" maxProcessors="75"
enableLookups="true" redirectPort="8443"
acceptCount="10" debug="0" connectionTimeout="20000"
useURIValidationHack="false"
protocolHandlerClassName="org.apache.jk.server.JkCoyoteHandler"/>











<Engine name="Standalone" defaultHost="localhost" debug="0">



<Logger className="org.apache.catalina.logger.FileLogger"
prefix="catalina_log." suffix=".txt"
timestamp="true"/>


<Realm className="org.apache.catalina.realm.UserDatabaseRealm"
debug="0" resourceName="UserDatabase"/>







<Host name="localhost" debug="0" appBase="webapps"
unpackWARs="true" autoDeploy="true">
<Context path="/my-jsp" docBase="c:\JSP-Files" debug="0"
privileged="true" reloadable="true" />
     <Context path="" docBase="c:\Inetpub\wwwroot" debug="0" privileged="true" />
<Context path="/sharon" docBase="C:\Tomcat 4.1\webapps\sharon" debug="0" privileged="true" />





<Logger className="org.apache.catalina.logger.FileLogger"
directory="logs" prefix="localhost_log." suffix=".txt"
     timestamp="true"/>




<Context path="/examples" docBase="examples" debug="0"
reloadable="true" crossContext="true">
<Logger className="org.apache.catalina.logger.FileLogger"
prefix="localhost_DBTest_log." suffix=".txt"
timestamp="true"/>
<Ejb name="ejb/EmplRecord" type="Entity"
home="com.wombat.empl.EmployeeRecordHome"
remote="com.wombat.empl.EmployeeRecord"/>



          
<Environment name="maxExemptions" type="java.lang.Integer"
value="15"/>
<Parameter name="context.param.name" value="context.param.value"
override="false"/>
<Resource name="jdbc/EmployeeAppDb" auth="SERVLET"
type="javax.sql.DataSource"/>
<Resource name="jdbc/TestDB"
     auth="Container"
     type="javax.sql.DataSource"/>
<ResourceParams name="jdbc/TestDB">
<parameter>
     <name>factory</name>
     <value>org.apache.commons.dbcp.BasicDataSourceFactory</value>
     </parameter>
     
     <parameter>
     <name>maxActive</name>
     <value>100</value>
     </parameter>
     
     <parameter>
     <name>maxIdle</name>
     <value>30</value>
     </parameter>
     
     <parameter>
     <name>maxWait</name>
     <value>10000</value>
     </parameter>

<parameter>
<name>user</name>
<value>javauser</value>
</parameter>
<parameter>
<name>password</name>
<value>javadude</value>
</parameter>

<parameter>
<name>driverClassName</name>
<value>org.gjt.mm.mysql.Driver</value>
</parameter>

     <parameter>
     <name>url</name>
     <value>jdbc:mysql://localhost:3306/javatest?autoReconnect=true</value>
</parameter>
</ResourceParams>
<Resource name="mail/Session" auth="Container"
type="javax.mail.Session"/>
<ResourceParams name="mail/Session">
<parameter>
<name>mail.smtp.host</name>
<value>localhost</value>
</parameter>
</ResourceParams>
<ResourceLink name="linkToGlobalResource"
global="simpleValue"
type="java.lang.Integer"/>
</Context>
</Host>
</Engine>
</Service>



</Server>
Pleas4 help!!!

you have your driver jar in Tomcat\common\lib?
if so, check your classpath, it could be that.

Has anyone used the new Quicken for Lion?

Before updating to Lion and purchasing the new Quicken which is compatible with Lion, I wanted to see if others have used it yet and if there are any major problems.

I have not experienced any problems with the new Quicken for Lion. It's quite different from the old version but it seems to work quite well. After installing Lion, the old version of Quicken was deemed useless. It will not run on Lion, so access it before you update if you intend to extract any info from it. Good luck!

Anyone fixed the Audio problem for HTML5 to android yet?

Just checking in for a solution to the audio not working on the html5 output for android

You could try reading this: http://support.apple.com/kb/HT4199
and
this: http://support.apple.com/kb/TS3727

Has anyone in the US recieved tax forms for 2014 yet? I haven't gotten mine so far.

Have you recieved your tax forms? (1099?)

Hello Upnovate,
1099 forms have already been sent out for US developers.
If you made over $600 USD in 2014 and have not received your 1099 please contact
Dev Center Support.
-Miles
Windows and Windows Phone Dev Center Support
Send us your feedback about the Windows Platform

Has anyone found the correct driver for Canon MF4018 printer?

I have tried installing all of the available drivers including MF4010 which other users have reported works- I keep getting Error-50 and cannot print anything. If anyone has used any driver for this printer that is compatible with my macbook pro - that could help me out a lot.

Since it's a 10.8 issue, why not place a new post in the 10.8 usage forum?
DALE

Has anyone fixed the Headstart libraries for Forms 11 ?

Similar Messages

Maybe you are looking for