Has anyone found a solution for duplex printing from OS 10.8 to Xerox Phaser 8560?
Is anyone else having duplex printing issues from OS 10.8 to Xerox Phaser 8560?
The next time you have the problem, note the exact time: hour, minute, second.
If you have more than one user account, these instructions must be carried out as an administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Scroll back in the log to the time you noted above. Select any messages timestamped from then until the end of the episode. Copy them to the Clipboard (command-C). Paste into a reply to this message (command-V).
When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some private information, such as your name, may appear in the log. Anonymize before posting.
Similar Messages
-
I reply to an email on my iPad. When I view the same email on the PC in MS outlook there is no indication that I have replied to it.
Is there an email app that I can use?
Has anyone found a solution for this?This seems to be an annoying part of the newer OS. When I first got my Pearl in 2008, I didn't have that occur. However once the OS got upgraded, and now with the Tour, it seems like that is the way it works. Not clear to me why they would have thought this is preferable.
-
Has anyone found a solution for the error "The iCloud Control Panel did not install properly". I'm using windows 7 prof 64 and outlook 2010 and cant get to cloud to winkd ot my mail, contacts, calendar. Cloud control panel version 2.0.
Has anyone found a solution for the error "The iCloud Control Panel did not install properly". I'm using windows 7 prof 64 and outlook 2010 and cant get to cloud to winkd ot my mail, contacts, calendar. Cloud control panel version 2.0.
-
Has Anyone Found a Solution for G5 Fans Gone Crazy?
First of all, let me say that I am a long time Mac user going back to the Mac Plus days so I think I am fairly experienced in the ways of the Macintosh.
I have a G5 Dual 2.0 ghz (Original Version) that is two years old and until last month has worked fine. Then I started getting Kernel Panic every day and the fans have gone crazy, revving up and down until I want to scream.
My local Apple authorized dealer does not seem to be able to fix this problem. They have installed a new Logic Board and 600 watt Power Supply and over $700 in labor in this machine. Nothing has helped and they seem to suggest that I have a software problem. I do not agree with their assessment. I could have bought a new computer for what I have spent so far. As I type this, the fans are screaming full blast.
On the internet, I have found lots of similiar G5 fan problems but nobody seems to indicate if they were able to get the fans to stop racing and act normal again.
I have tried the normal suggestions, Engery Setting to Highest, reset the PRAM, erased my hard drive and reinstalled OS 10.4.6 several times, logged on as a new user. Nothing seems to help. Fans just will not settle down.
I bought this computer as a DEMO model and did not receive the Apple Hardware Monitoring CD. Does anyone know how I can get this disk? Perhaps, it could tell me what is wrong.
Looking for any help with this problem.
G5 Dual 2.0 ghz, PowerMac w ATI x800 video card, 3 gb RAM Mac OS X (10.4.6)Sorry to hear about your problem Robert.
Since you have already started a hardware process with Apple, it's best to just deal with them. We users really can't do much.
I'm sure software has been eliminated by now in your repair process.
The verison of Apple Hardware Test on your install disks is no longer compatible with your firmware and OS version. Only Apple Store folks and techs would have a recent copy. I'm sure they ran it several times by now.
Take your machine back and say it's not fixed, remove your boot drive so they would have to use their own. Try another boot drive and remove the first.
All we can really do. -
Has anyone found a solution for fixing the dvd reading problems after installing snow leopard?
I installed snow leopard on my macpro tower and my dvd player will not read dvds. My archived dvd all come up blank but on my laptop their fine. All my other dvds are just spit out. I have seen hundreds of post about this in the forums but I haven't come across a solution. Apple told me they have never come across this issue which is disturbing to say the least.
Leroydouglas
Thanks, I did see that thread and way too many others like it. My drive was working fine up to the minute I installed snow leopard and now I can't read all my archived dvds of the last 5 years of my work. Nor will it read the training dvd "New" that I just bought. It also won't even read the iwork disc that came with snow leopard. Of course all these disc work fine on my other make that didn't get the snow leopard upgrade. Apple support told me they never heard of anything like this. I took it to the apple store and they think it the dvd drive itself. Please, it plays cds fine and accepts new dvd media...some. Countless people have had their drives go out right after the snow leopard install.
I'm sorry but what happens to a dvd player or what hardware problem happens to only allow a player to read a few dvds but all cds. Could someone explain to me what breaks. Apple saying I need to by a new dvd player from them is crazy. Why do I get the feeling that if I install snow leopard on my other machine that the dvd player will also break. How also can apple not have any record of this happening to others.
I work with windows machines and linux boxes and Macs and I'm sorry I trusted an upgrade to a mac os that has been around for a while. If I would have checked the forums the way I do with anything I work with I guarantee I would not have upgrade to snow leopard after seeing all the people out their with this issue. It is also shameful that apple says it has no knowledge of this problem. -
Has anyone found any solution for the noise problem for an iMac 21.5"?
I have recently bought a new iMac 21.5" 1TB. There is constant noise which sounds like it comes from the disk drive. It is very loud and annoying and you can hear it 10 ft away even. I took it to the Apple store and of course it is too noisy in the store for them to hear it. I left it at the store for them to check and you guess it, they did not notice any disk drive problem and return back to me. I am not an advanced users and I tell you I am not complaining out of the blue and it is not my imagination. After digging through the community, I seem to find a number of threads indicating that there is noise issue on the iMac.
Now I am worried that I have returned my iMac. If this is not a defect, I am thoroughly disappointed in Apple for designing such a crappy product. How can they let a product like that out?
Before I give up, does anyone out there have any advice? Is my only option now return the unit?Millions have not had a problem so perhaps yours is due to a bad install. What troubleshooting steps have you done? Restart, reset, restore from backup, restore as new are steps you can take to try and resolve the problem.
-
Has anyone found a solution for the screen freeze on iPhone 6 plus?
I have an iPhone 6 plus on t mobile. Since buying the phone, there has been difficulty with the screen randomly freezing. I was wondering if this was a software fix or do I need to have the hardware looked at.
Have you tried these basic troubleshooting steps?
Restart / Reset
http://support.apple.com/en-us/HT201559
Restore from backup
Restore as new
http://support.apple.com/en-us/HT201252
If no joy, make an appointment with the Apple genius bar for an evaluation. -
Has anyone found a solution for iPhone 5 data leak issues?
Up until about a week ago I was using a 3GS and the data leak issues seemed to be fixed with the newest iOS 6 update. However, I recently got an iPhone 5 and I've noticed it uses around 1 MB per hour no matter what I'm actually doing on the phone. I actually went to sleep last night, turning of cellular data AND wifi and it STILL used about 4 MB of data!! What is up with this?? I am a pretty conservative user of data when not on wifi, but I'm only 2 days in to my bill cycle and already on pace to go over my 2 GB limit by the end of the month. Please help! I do not want to switch my plan and play more! I am on AT&T by the way.
Have you tried these basic troubleshooting steps?
Restart / Reset
http://support.apple.com/en-us/HT201559
Restore from backup
Restore as new
http://support.apple.com/en-us/HT201252
If no joy, make an appointment with the Apple genius bar for an evaluation. -
iOS 8.1.3 update problem.
Millions have not had a problem so perhaps yours is due to a bad install. What troubleshooting steps have you done? Restart, reset, restore from backup, restore as new are steps you can take to try and resolve the problem.
-
24" Cinema display is flickering every 30 seconds or so. Has anyone found a solution?
I have a 2009 Power Mac tower with a 24" cinema display also 2009. About a year ago the display started flickering, like it was turning on and off. I've got a duel display set up and the other one (older acrylic 20") works fine. I've checked the cords, updated to the latest soft wear, at least I think I have. I see others having the same issue. Has anyone found a solution? This is really annoying when trying to do graphics work. Any help would be much appreciated
Hi 517 Design,
Thanks for visiting Apple Support Communities.
If you are seeing flickering on your Cinema Display, you can find many additional troubleshooting tips in this guide that can be helpful:
Apple computers: Troubleshooting issues with video on internal or external displays - Apple Support
Best Regards,
Jeremy -
In Adobe Pro XI when converting an excel file to a pdf, the pdf is not retaining the page size settings. Has anyone found a fix for this?
It shouldn't print each page as a separate job and
each tab has a different name, so, even if it did, it
ought to give the printouts the name of the tabs.
It doesn't print each page as a separate job unless the orientation is different - that's the bug. And the name of the job is taken from the name of the window, not the name of the tabs. That's how every application works, which, I think, is why Excel allows the specific selection or the active sheets to be printed.
Still, that does sound like a plausible explanation.
However, even if presented with multiple prints with
the same name, the spooler should print each one!
The spooler does print each one - you can watch the spooler process the multiple jobs. I think, though, that they are being overwritten since all the jobs have the name of the window as the job title. And since this happens after the Save Dialog is presented, there's really nothing the application can do. To Excel, it's one job, the multiple orientations don't matter; it's just that Apple doesn't handle it correctly.
As a workaround, you can print the selections one at a time and give them unique names and then rejoin them in one PDF file. -
Has anyone found a solution to sending mail to Groups in Mavericks? I've been given two solutions - neither are satisfactory. One is to type name of group into address line, the other is to go to address book and right click on group.
thanks a lot for your kind help... saved me a lot of time and effort, could not believe it at first that the process is so simple but once i followed the steps it worked fine. appreciate your help.
-
HP PSC 2355 Has anyone found a solution that worked ?
Re: HP PSC 2355 all in one
Has anyone found a solution that worked?
This printer used to work fine with Tiger – after a lot of headaches setting it up. Seemingly, after downloading a latest 10.4 up-grade, I lost all functions with this 3 in 1 printer. I’ve done all the procedures on the HP site, purged everything HP on my computer relating to applications, and re-installed the software. However, the printer does not show up on the ‘Printer List’ in the ‘Printer Setup Utility. Error message stating that ‘No default Device Detected’ or, Error ‘Sorry, scanner could not be initialized. (Scanner not found.)
Any help would be greatly appreciated.
Thank-you,
Steve
iMac G5 Mac OS X (10.4.7) iMac G5 1.8GHz, 20in.Re: HP PSC 2355 all in one
Has anyone found a solution that worked?
This printer used to work fine with Tiger – after a
lot of headaches setting it up. Seemingly, after
downloading a latest 10.4 up-grade, I lost all
functions with this 3 in 1 printer. I’ve done all the
procedures on the HP site, purged everything HP on my
computer relating to applications, and re-installed
the software. However, the printer does not show up
on the ‘Printer List’ in the ‘Printer Setup Utility.
Error message stating that ‘No default Device
Detected’ or, Error ‘Sorry, scanner could not be
initialized. (Scanner not found.)
Any help would be greatly appreciated.
Thank-you,
Steve
iMac G5 Mac OS X
(10.4.7) iMac G5 1.8GHz, 20in.
I am not sure if you are having the same issue or not since you did post this back in Dec but itf it is still a ongoing problem after downloading updates to the Mac OS follow this docuemnt --------------------------------------------------> http://h10025.www1.hp.com/ewfrf/wc/document?lc=en&cc=us&docname=c00501015&produc t=422000&dlc=en&lang=en
And by the sounds of it i know you have gone though this document already
Download this driver it is the lates driver and it fixes alot of things
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?lc=en&cc=us&dlc=en&os=2 19&product=422000&lang=en&softwareitem=mp-42125-1
G4 Mac Mini Mac OS X (10.4.7) -
i upgraded to the new itunes version 7 and now my podcasts on my iphone4 won't work. i get an error message "temporarily unavailable". has anyone found a solution to be able to listen to podcasts? thanks
I have the same problem, but don't expect Apple to help! I rang their help line and explained the situation and that the same experience is reported all over their forum and they would not assist unless I paid for a one year help subsciption.
This company has lost the plot! They create software that universally will not work then expect customers to pay to have it fixed. Technically I should walk straight into the nearest apple shop and ask for a refund, as the device is no longer fit for purpose!
Congratulations Apple for the best ant-promotional App on the market and your astounding lack of service ethos. -
after getting the latest update I recieve an error about MSVCR80.dll Missing, has anyone found the solution as uninstalling and then installing doesnt seem to work
Doublechecking. Have you tried the following user tip?
Troubleshooting issues with iTunes for Windows updates
Maybe you are looking for
-
Help: Working with .MOV files in FCP and forced to RENDER FOR EVERY EDIT
I'm working with .MOV files from my digital camera in Final Cut Pro and every time I make a new edit, I have to render it in order to see it in the canvas. How do I make it so that I don't have to render every edit in order to see it? (I've worked wi
-
Info on JSP caching in WebLogic 5.1
Hi, I found your name in the Weblogic newsgroup and hence decided to post this question to you. Hope you do'nt mind my asking it. I would like to know something about caching of Java Server Pages in WebLogic
-
Problem querying an Oracle Database using PHP
Hi there, im rather new to Oracle so pardon my ignorance if this is completely obvious but I am creating a web form that queries an oracle database, firstly is a user form which looks like this. <br><br> Search for Investments<br> <form action="query
-
USB Headphone Mic shutting down upon opening Ventrilo
I've had my Fatality headset for a solid 6 months now. A couple of nights ago, after logging off of my vent serverto go onto another server, I lost the "ability" to speak. I can hear everything fine (vent, TS, "in game", music, movies). My push to ta
-
Block Price change for specific Items.
Hi, Any helpon this, we want to block users to change the Price structure at the transaction level but also we want the flexibility of changing the price in specific items which is as per sample from customer . Means we have 100 items and we want th