Has Anyone Found the New Version of the iPod Radio Remote?

Hi,
Per iLounge, Apple released an updated ipod radio remote that has the most current version of Apple's ipod headphones as opposed to the shortened ones. I've checked on-line, Best Buy, Circuit City Compu World, Micro Center with no luck. I aslo tried the bricks-and-mortar Apple store...they looked at me like I had ten heads. Apparently they have the same sku as the old set.
I posted a question to Apple Support, but no response yet. Has anyone found the new version anywhere?
Thanks

Thanks. I've submitted requests to Apple to find out if or when they will be shipping the new remote, but they have not responded within their promoted 24-hour timeframe. I'll try to order from Apple directly and hope I get the new headphones too!
Thanks

Similar Messages

Has anyone found a way to use the Epson Print Utility with an Airport?

I have an Epson Photo 2200 connected to the USB port of my Time Capsule. Everything has been working great until recently. Now I cannot use Epson Printer Utility unless I connect the printer directly to my Mac via the USB port. It does not find the printer. Connected directly, Epson Print Utility2 works properly. Epson Print Utility3 does not find the printer, even when connected directly. Reading the various discussion threads, I am not alone and the problem is with many, if not all of the Epson printers. The Utility worked fine at one time but appears to have quit working over the network probably around OS upgrade 10.5.2. In addition, you must use the Gutenprint driver when installing the printer. Epson's gives an error.
Has anyone found a way to use the Epson Print Utility with an Airport print server with OS 10.5.2 or later?

Before receiving this reply, I had other problems with the Gutenprint driver. I'm not sure what I did but after playing around for about a day, the Epson driver finally worked while connected through the USB port. The printer then worked with the Airport. The print utility still doesn't work without being directly connected. (It used to work while connected to the Airport. Until recently, I never connected the printer directly to a computer.)

Has anyone found a solution to fixing the FileVault "encryption paused" error?

I got my Macbook Air in mid January 2015. When I set it up I decided to enable FileVault but after a few minutes the encryption failed and now it will not continue and complete, even when I have my computer on and plugged in. I have seen many different possible solutions, but none that really worked well. Has anyone found a good solution to the issue?

Back up all data before proceeding. There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
Start up in Recovery mode. When the OS X Utilities screen appears, select Disk Utility.
In the Disk Utility window, select the icon of the startup volume from the list on the left. It will be nested below another disk icon, usually with the same name. Click the Unlock button in the toolbar. When prompted, enter the login password of a user authorized to unlock the volume, or the alternate decryption key that was generated when you activated FileVault.
Then, from the menu bar, select
File ▹ Turn Off Encryption
Enter the password again.
You can then restart as usual, if the system is working. Decryption will be completed in the background. It may take several hours, and during that time performance will be reduced.
If you can't turn off encryption in Disk Utility because the menu item is grayed out, you'll have to erase the volume and then restore the data from a backup. Select the Erase tab, and then select
Mac OS Extended (Journaled)
from the Format menu.
You can then quit to be returned to the main Recovery screen. Follow these instructions if you back up with Time Machine. If you use other backup software, follow its developer's instructions.
Don't erase the volume unless you have at least two complete, independent backups. One is not enough to be safe.

Dear All Has anyone found a break through with the issue of Connect to itunes to use push notifications

Dear All Has anyone found a break through with the issue of Connect to itunes to use push notifications

Did you get any help on this? From what I can see from surfing this site, it's a BUG that no one has offered a solution to. It sometimes happens after a 'reset' and going to ITunes does not offer a way to 'set up push notifications'.

SSIS 2014 Custom Component: "The component metadata could not be upgraded to the newer version of the component."

I recently upgraded my set of custom data flow components to use the SQL 2014 SDK as we are upgrading to SQL Server 2014 RTM. The only change I made to my custom components was to change the references to the following DLLs from version 11.0 to version
12.0:
Microsoft.SqlServer.DTSPipelineWrap
Microsoft.SQLServer.DTSRuntimeWrap
Microsoft.SQLServer.ManagedDTS
Microsoft.SqlServer.PipelineHost
After rebuilding my assembly, adding it to the GAC, and placing it in the appropriate directory structure (the 120\DTS\PipelineComponents directory for both the x86 and x64 versions), my components no longer display in the SSIS toolbox in SSDT. In
addition, whether loading up my packages in SSDT or executing them via the SSIS catalog (in SQL 2014), I get the series of error messages below. I do have a PerformUpgrade method implemented in my packages that has worked successfully through previous
component upgrades. I also found this seemingly relevant thread (Custom
SSIS Connection Manager error message in SSIS 2014 (RTM): The connection manager '' is not properly installed on this computer.) and tried modifying the extensions.xml script, but I was unsuccessful with this approach (though I could have done so
incorrectly).
Validation error. DFT Process Changes: DFT Process Changes: The component metadata for "xxx, clsid {874F7595-FB5F-40FF-96AF-FBFF8250E3EF}" could not be upgraded to the newer version of the component. The PerformUpgrade method failed.
Error loading xxx.dtsx: The "xxx" failed to cache the component metadata object and returned error code 0x80131600.
Error loading xxx.dtsx: Component xxx, clsid {874F7595-FB5F-40FF-96AF-FBFF8250E3EF} failed to initialize due to error 0xC0047067 "The "%1" failed to cache the component metadata object and returned error code 0x%2!8.8X!.".
Error loading xxx.dtsx: The component is missing, not registered, not upgradeable, or missing required interfaces. The contact information for this component is "".
Error loading xxx.dtsx: The component metadata for "xxx" could not be upgraded to the newer version of the component. The PerformUpgrade method failed.
Validation error. DFT Process Changes SSIS.Pipeline: The component metadata for "xxx, clsid {874F7595-FB5F-40FF-96AF-FBFF8250E3EF}" could not be upgraded to the newer version of the component. The PerformUpgrade method failed.
Thanks in advance,
Ben

Hi Ben,
Please also update the reference to the SSIS assembly Microsoft.SqlServer.Dts.Design located in C:\Program Files (x86)\Microsoft SQL Server\120\SDK\Assemblies folder to the version 12.0.0.0. Besides, rename IDTSxxxx110 objects to IDTSxxxx120.
It may also be the factor that the custom mapping file is not created correctly. You can make a copy of the built-in mapping.xml.sample file, rename its extension to XML, and then edit its <ExtensionMapping> attribute:
<ExtensionMapping tag="mycustom extension"
oldAssemblyStrongName="MyCustomAssembly.MyCustomTask, MyCustomAssembly, Version=1.0.0.0, Culture=neutral, PublicKeyToken=89845dcd8080cc91"
newAssemblyStrongName="MyCustomAssembly.MyCustomTask, MyCustomAssembly, Version=2.0.0.0, Culture=neutral, PublicKeyToken=89845dcd8080cc91" />
Then, we need to upgrade the packages, and SSIS will read all the XML mapping files placed in this directory during upgrade.
References (although the blogs are written for SSIS 2008 by Matt, we can still refer to them for SSIS 2014):
http://blogs.msdn.com/b/mattm/archive/2008/02/01/custom-extensions-in-sql-server-2008.aspx
http://blogs.msdn.com/b/mattm/archive/2007/06/05/katmai-custom-components-and-upgrade.aspx
Regards,
Mike Yin
If you have any feedback on our support, please click
here
Mike Yin
TechNet Community Support

When the message arrives, the message tone sound that many times. How this problem can be solved? I installed the new version, but the problem is not resolved, the future is to be taken into account in the new version of this?

When the message arrives, the message tone sound that many times. How this problem can be solved? I installed the new version, but the problem is not resolved, the future is to be taken into account in the new version of this?

I'm not sure I understand the question, is the message tone going more then once?
Turn off repeat message alert here:
settings > notifications > messages > repeat alert > never
Some people have found this does not stop the repeat miessage tone,
if you are one of those then I suggest you contact Apple:
http://www.apple.com/feedback/iphone.html
They may not respond, but hopefully will fix in uodate if enough people complain.

HT1420 I have the new version of the macbook pro and I cannot find authorize this computer anywhere on itunes. I have read the directions multiple times and still cannot find it. Please help!

I have the newer version of the macbook pro and I have read the directions on how to authorize your computer to let you download previous song purchases from icloud onto your laptop, but I cannot find where it says "authorize this computer" at all. I have looked for it everywhere and still cannot find it. Please help!

Authorization and Deauthorization
Macs: iTunes Store- About authorization and deauthorization.
Windows: How to Authorize or Deauthorize iTunes | PCWorld.
In iTunes you use the Authorize This Computer or De-authorize This Computer option under the Store menu in iTunes' menubar. For Windows use the ALT-S keys to access it. Or turn on Windows 7 and 8 iTunes menus: iTunes- Turning on iTunes menus in Windows 8 and 7.
More On De-authorizing Computers (contributed by user John Galt)
You can de-authorize individual computers, but only by using those computers. The only other option is to "de-authorize all" from your iTunes account.
1. Open iTunes on a computer
2. From the Store menu, select "View my Account..."
3. Sign in with your Apple ID and password.
4. Under "Computer Authorizations" select "De-authorize All".
5. Authorize each computer you still have, as you may require.
You may only do this once per year.
After you "de-authorize all" your authorized computers, re-authorize each one as required.
If you have de-authorized all computers and need to do it again, but your year has not elapsed, then contact: Apple - Support - iTunes - Contact Us.

I click the aperture but can not open the new version of the aperture

I click the aperture but can not open the new version of the aperture

What is your current Aperture version? And your MacOS X version?
What happens, when you try to launch Aperture? Any error message? Which error messages exactly?
Where is your Aperture library located? On your system drive or an external drive?

What do I do with my old CS4 when downloading the new versions from the cloud?

What do I do with my old CS4 when downloading the new versions from the cloud?
Do I just uninstall via the control panel on my computer?

if you no longer need cs4, deactivate it (help>deactivate) and uninstall it.
otherwise, leave it installed along with cc. you can use both if you need.

HT202879 I downloaded the new version of pages about a month ago. Today I tried to open documents that I created and saved with the new version and received a message that I needed to download the new version. The app store shows the download. HUH?!?

I downloaded the new version of pages about a month ago. Today I tried to open documents that I created and saved with the new version and received a message that I needed to download the new version. The app store shows the download. HUH?!?

I'm not sure what you mean by it making accessing files more complicated. I have both Pages 4.3 & Pages 5.1 icons in my Dock as well as Numbers 2.3 & Numbers 3.1. I continue to use the iWork '09 versions for my everyday needs. As long as the new versions are in your Applications folder & the '09 versions in the iWork '09 folder, Software Update will not have a problem updating them even if Apple should come out with a new update for the '09 versions.
Because I have moved the new versions to an external drive & renamed the apps because I want '09 to be the default apps, I do have to remember to move them back to my applications folder & restore the original names before updating. But since you like the new versions this "complication" doesn't apply to you.

Iphoto doesn't open, and i can't download the new version in the apple store

after downloading OS X-yosemite i can't open my iphoto. When i click on it, it says that i have to download the new version in the apple store but when i go there i can't download the new version. I hope someone can help me because i can't find a solution for this problem.
thanks,
pien

I'm from the Netherlands so thats why it says installatie, (in english installation). but when i click on installation, nothing happens..

Has anyone found an easy solution to the U44M1P7 error when installing CC updates?

Like many, many people, shortly after Christmas, 8 updates appeared for various CC apps including Photoshop and Premier Pro, etc.
Every time I try to install these updates, it fails with the U44M1P7 message. I took a look at the knowledge base article about this message and they suggest that some language files got deleted or something and the apps need to be re-installed.
I know for a fact that I did not delete any Adobe files at all in any way from my installation. I do not use any type of cleaner software and have not even used most of these apps let alone deleted for messed with their files in any way.
For as many people that suddenly reported this problem with updates, just makes me suspicious that there is something wrong with the stinking update.
I just can't believe that I have to re-install all this junk just to get updates working again when it just stopped working for no reason at all.
Has anyone found the reason for this and have a quick fix?
Thanks

Hello,
I just tried to install the update for Photoshop CC and this is the error log it created:
01/14/14 10:34:04:611 | [INFO] | | OOBE | DE | | | | 892 | *=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*
01/14/14 10:34:04:611 | [INFO] | | OOBE | DE | | | | 892 | Visit http://www.adobe.com/go/loganalyzer/ for more information
01/14/14 10:34:04:611 | [INFO] | | OOBE | DE | | | | 892 | *=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*
01/14/14 10:34:04:611 | [INFO] | | OOBE | DE | | | | 892 | *=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*
01/14/14 10:34:04:611 | [INFO] | | OOBE | DE | | | | 892 | START - Installer Session
01/14/14 10:34:04:611 | [INFO] | | OOBE | DE | | | | 892 | *=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*
01/14/14 10:34:04:611 | [INFO] | | OOBE | DE | | | | 892 | RIBS version: 7.0.0.108
01/14/14 10:34:04:611 | [INFO] | | OOBE | DE | | | | 892 | Win OS version: 6.1.1.0 64 bit Type: 1
01/14/14 10:34:04:611 | [INFO] | | OOBE | DE | | | | 892 | ::START TIMER:: [Total Timer]
01/14/14 10:34:04:611 | [INFO] | | OOBE | DE | | | | 892 | CHECK: Single instance running
01/14/14 10:34:04:612 | [INFO] | | OOBE | DE | | | | 892 | CHECK : Credentials
01/14/14 10:34:04:612 | [INFO] | | OOBE | DE | | | | 892 | Load Deployment File
01/14/14 10:34:04:612 | [INFO] | | OOBE | DE | | | | 892 | deploymentFile option not given
01/14/14 10:34:04:612 | [INFO] | | OOBE | DE | | | | 892 | CHECK : Another Native OS installer already running
01/14/14 10:34:04:612 | [INFO] | | OOBE | DE | | | | 892 | Create Required Folders
01/14/14 10:34:04:612 | [INFO] | | OOBE | DE | | | | 892 | Assuming install mode
01/14/14 10:34:04:612 | [INFO] | | OOBE | DE | | | | 892 | Looking up install source path
01/14/14 10:34:04:612 | [INFO] | | OOBE | DE | | | | 892 | Sync Media DB ...
01/14/14 10:34:04:612 | [INFO] | | OOBE | DE | | | | 892 | ::START TIMER:: [Sync Media DB]
01/14/14 10:34:04:612 | [INFO] | | OOBE | DE | | | | 892 | Pre check media db sync
01/14/14 10:34:04:612 | [INFO] | | OOBE | DE | | | | 892 | End of Pre check media db sync. Exit code: 0
01/14/14 10:34:04:612 | [INFO] | | OOBE | DE | | | | 892 | :: END TIMER :: [Sync Media DB] took 66.0508 milliseconds (0.0660508 seconds) DTR = 7751.61 KBPS (7.56993 MBPS)
01/14/14 10:34:04:612 | [INFO] | | OOBE | DE | | | | 892 | Ready to initialize session to start with ...
01/14/14 10:34:04:612 | [INFO] | | OOBE | DE | | | | 892 | ::START TIMER:: [CreatePayloadSession]
01/14/14 10:34:04:612 | [INFO] | | OOBE | DE | | | | 892 | -------------------- BEGIN - Updating Media Sources - BEGIN --------------------
01/14/14 10:34:04:612 | [INFO] | | OOBE | DE | | | | 892 | Updated source path: C:\Users\fjcranston\AppData\Local\Temp\Adobe\AAMUpdater\AdobeCSXSInfrastructure4-4\4.0.2\ setup
01/14/14 10:34:04:612 | [INFO] | | OOBE | DE | | | | 892 | Updating media info for: {45C5DE59-4DB4-4A96-84E1-93C59BD5C4AE}
01/14/14 10:34:04:612 | [INFO] | | OOBE | DE | | | | 892 | Ignoring original data since install source is local
01/14/14 10:34:04:612 | [INFO] | | OOBE | DE | | | | 892 |   Type: 0, Volume Order: 1, Media Name: AdobeCSXSInfrastructure4-mul
Path: C:\Users\fjcranston\AppData\Local\Temp\Adobe\AAMUpdater\AdobeCSXSInfrastructure4-4\4.0.2\ setup\payloads\AdobeCSXSInfrastructure4-mul-261213100542\Install.db
01/14/14 10:34:04:612 | [INFO] | | OOBE | DE | | | | 892 | -------------------- END - Updating Media Sources - END --------------------
01/14/14 10:34:04:617 | [INFO] | | OOBE | DE | | | | 892 | Supported RIBS version range: [0.0.0.0,7.0.0.108]
01/14/14 10:34:04:617 | [INFO] | | OOBE | DE | | | | 892 | ----------------- CreatePayloadSession: machine is x64 ---------------
01/14/14 10:34:07:117 | [INFO] | | OOBE | DE | | | | 892 | ______ Verify Dependency Subscribers ______
01/14/14 10:34:07:118 | [INFO] | | OOBE | DE | | | | 892 | BEGIN Operation order for all session payloads: mediaGroup (requires,satisfies)
01/14/14 10:34:07:118 | [INFO] | | OOBE | DE | | | | 892 |   Adobe CSXS Infrastructure 4_4.0.2_AdobeCSXSInfrastructure4-mul 4.0.2.0 {45C5DE59-4DB4-4A96-84E1-93C59BD5C4AE}: 0 (0,0)
01/14/14 10:34:07:118 | [INFO] | | OOBE | DE | | | | 892 | END Operation order for all session payloads: mediaGroup (requires,satisfies)
01/14/14 10:34:07:120 | [INFO] | | OOBE | DE | | | | 892 | Patch Adobe CSXS Infrastructure 4_4.0.2_AdobeCSXSInfrastructure4-mul 4.0.2.0 {45C5DE59-4DB4-4A96-84E1-93C59BD5C4AE} can be applied to product Adobe CSXS Infrastructure 4 4.0.0.0 {5F816B76-62F3-41C9-B651-27F49F25F50B}
01/14/14 10:34:07:130 | [INFO] | | OOBE | DE | | | | 892 | Ignoring deployment input for the INSTALLDIR: marked as fixed
01/14/14 10:34:07:130 | [INFO] | | OOBE | DE | | | | 892 | Setting property "installSourcePath" to: C:\Users\fjcranston\AppData\Local\Temp\Adobe\AAMUpdater\AdobeCSXSInfrastructure4-4\4.0.2\ setup
01/14/14 10:34:07:130 | [INFO] | | OOBE | DE | | | | 892 | Setting property "mode" to: silent
01/14/14 10:34:07:130 | [INFO] | | OOBE | DE | | | | 892 | Setting property "updateManifestPath" to: C:\Users\fjcranston\AppData\Local\Adobe\AAMUpdater\1.0\Data\AdobeCSXSInfrastructure4-4\4. 0.2\4.0.2.xml
01/14/14 10:34:07:130 | [INFO] | | OOBE | DE | | | | 892 | Setting property "workflow" to: updater
01/14/14 10:34:07:130 | [INFO] | | OOBE | DE | | | | 892 | Overwrite property "extensionsOnly" to: 1
01/14/14 10:34:07:130 | [INFO] | | OOBE | DE | | | | 892 | Overwrite property "mode" to: silent
01/14/14 10:34:07:130 | [INFO] | | OOBE | DE | | | | 892 | Overwrite property "patchesOnly" to: 1
01/14/14 10:34:07:130 | [INFO] | | OOBE | DE | | | | 892 | Overwrite property "updateManifestPath" to: C:\Users\fjcranston\AppData\Local\Adobe\AAMUpdater\1.0\Data\AdobeCSXSInfrastructure4-4\4. 0.2\4.0.2.xml
01/14/14 10:34:07:130 | [INFO] | | OOBE | DE | | | | 892 | Overwrite property "workflow" to: updater
01/14/14 10:34:07:130 | [INFO] | | OOBE | DE | | | | 892 | Found payload actions:
01/14/14 10:34:07:130 | [INFO] | | OOBE | DE | | | | 892 | Deciding what installer mode to use...
01/14/14 10:34:07:156 | [INFO] | | OOBE | DE | | | | 892 | BEGIN Setting requested payload actions
01/14/14 10:34:07:157 | [INFO] | | OOBE | DE | | | | 892 | Value returned on lookup of payload: Adobe CSXS Infrastructure 4_4.0.2_AdobeCSXSInfrastructure4-mul 4.0.2.0 {45C5DE59-4DB4-4A96-84E1-93C59BD5C4AE} is: false
01/14/14 10:34:07:158 | [INFO] | | OOBE | DE | | | | 892 | Action string for Adobe CSXS Infrastructure 4_4.0.2_AdobeCSXSInfrastructure4-mul 4.0.2.0 {45C5DE59-4DB4-4A96-84E1-93C59BD5C4AE} is install
01/14/14 10:34:07:158 | [INFO] | | OOBE | DE | | | | 892 | END Setting requested payload actions
01/14/14 10:34:07:162 | [INFO] | | OOBE | DE | | | | 892 | Collected advanced path check information for INSTALLDIR
01/14/14 10:34:07:162 | [INFO] | | OOBE | DE | | | | 892 | INSTALLDIR is a well-formed path
01/14/14 10:34:07:162 | [INFO] | | OOBE | DE | | | | 892 | INSTALLDIR is not the root path
01/14/14 10:34:07:162 | [INFO] | | OOBE | DE | | | | 892 | INSTALLDIR is on a local volume
01/14/14 10:34:07:162 | [INFO] | | OOBE | DE | | | | 892 | INSTALLDIR is on a writable volume
01/14/14 10:34:07:162 | [INFO] | | OOBE | DE | | | | 892 | INSTALLDIR is not on a case sensitive volume
01/14/14 10:34:07:162 | [INFO] | | OOBE | DE | | | | 892 | INSTALLDIR passed path basic path validation: C:\Program Files (x86)\Common Files\Adobe\CEPServiceManager4
01/14/14 10:34:09:995 | [INFO] | | OOBE | DE | | | | 892 | ::START TIMER:: [System check :{45C5DE59-4DB4-4A96-84E1-93C59BD5C4AE}]
01/14/14 10:34:10:025 | [INFO] | | OOBE | DE | | | | 892 | In InstallPreSystemCheckProc
01/14/14 10:34:10:025 | [INFO] | | OOBE | DE | | | | 892 | Custom action return code: 0
01/14/14 10:34:10:025 | [INFO] | | OOBE | DE | | | | 892 | :: END TIMER :: [System check :{45C5DE59-4DB4-4A96-84E1-93C59BD5C4AE}] took 30.5966 milliseconds (0.0305966 seconds)
01/14/14 10:34:10:025 | [INFO] | | OOBE | DE | | | | 892 | BEGIN InstallOperationsQueue Unordered operations
01/14/14 10:34:10:025 | [INFO] | | OOBE | DE | | | | 892 |   Adobe CSXS Infrastructure 4_4.0.2_AdobeCSXSInfrastructure4-mul 4.0.2.0 {45C5DE59-4DB4-4A96-84E1-93C59BD5C4AE}: with operation install
01/14/14 10:34:10:025 | [INFO] | | OOBE | DE | | | | 892 | END InstallOperationsQueue Unordered operations
01/14/14 10:34:10:025 | [INFO] | | OOBE | DE | | | | 892 | BEGIN InstallOperationsQueue Ordered operations
01/14/14 10:34:10:025 | [INFO] | | OOBE | DE | | | | 892 |   Adobe CSXS Infrastructure 4_4.0.2_AdobeCSXSInfrastructure4-mul 4.0.2.0 {45C5DE59-4DB4-4A96-84E1-93C59BD5C4AE}: with operation install
01/14/14 10:34:10:026 | [INFO] | | OOBE | DE | | | | 892 | END InstallOperationsQueue Ordered operations
01/14/14 10:34:10:095 | [INFO] | | OOBE | DE | | | | 892 | Payloads passed preflight validation.
01/14/14 10:34:10:095 | [INFO] | | OOBE | DE | | | | 892 | Call PreSession Custom Hook
01/14/14 10:34:10:096 | [INFO] | | OOBE | DE | | | | 892 | ::START TIMER:: [Pre session :{45C5DE59-4DB4-4A96-84E1-93C59BD5C4AE}]
01/14/14 10:34:10:105 | [INFO] | | OOBE | DE | | | | 892 | In InstallSessionOpenProc
01/14/14 10:34:10:105 | [INFO] | | OOBE | DE | | | | 892 | Custom action return code: 0
01/14/14 10:34:10:105 | [INFO] | | OOBE | DE | | | | 892 | :: END TIMER :: [Pre session :{45C5DE59-4DB4-4A96-84E1-93C59BD5C4AE}] took 9.06221 milliseconds (0.00906221 seconds)
01/14/14 10:34:10:105 | [INFO] | | OOBE | DE | | | | 892 | BEGIN InstallOperationsQueue Unordered operations
01/14/14 10:34:10:105 | [INFO] | | OOBE | DE | | | | 892 |   Adobe CSXS Infrastructure 4_4.0.2_AdobeCSXSInfrastructure4-mul 4.0.2.0 {45C5DE59-4DB4-4A96-84E1-93C59BD5C4AE}: with operation install
01/14/14 10:34:10:105 | [INFO] | | OOBE | DE | | | | 892 | END InstallOperationsQueue Unordered operations
01/14/14 10:34:10:105 | [INFO] | | OOBE | DE | | | | 892 | BEGIN InstallOperationsQueue Ordered operations
01/14/14 10:34:10:105 | [INFO] | | OOBE | DE | | | | 892 |   Adobe CSXS Infrastructure 4_4.0.2_AdobeCSXSInfrastructure4-mul 4.0.2.0 {45C5DE59-4DB4-4A96-84E1-93C59BD5C4AE}: with operation install
01/14/14 10:34:10:105 | [INFO] | | OOBE | DE | | | | 892 | END InstallOperationsQueue Ordered operations
01/14/14 10:34:10:114 | [INFO] | | OOBE | DE | | | | 892 | Calling the custom action code for pre-install for payload Adobe CSXS Infrastructure 4_4.0.2_AdobeCSXSInfrastructure4-mul 4.0.2.0 {45C5DE59-4DB4-4A96-84E1-93C59BD5C4AE}
01/14/14 10:34:10:115 | [INFO] | | OOBE | DE | | | | 892 | ::START TIMER:: [Pre payload :{45C5DE59-4DB4-4A96-84E1-93C59BD5C4AE}]
01/14/14 10:34:10:124 | [INFO] | | OOBE | DE | | | | 892 | In PrePayloadInstallProc
01/14/14 10:34:15:128 | [INFO] | | OOBE | DE | | | | 892 | Custom action return code: 0
01/14/14 10:34:15:128 | [INFO] | | OOBE | DE | | | | 892 | :: END TIMER :: [Pre payload :{45C5DE59-4DB4-4A96-84E1-93C59BD5C4AE}] took 5013.23 milliseconds (5.01323 seconds)
01/14/14 10:34:15:128 | [INFO] | | OOBE | DE | | | | 892 | ::START TIMER:: [Payload Operation :{45C5DE59-4DB4-4A96-84E1-93C59BD5C4AE}]
01/14/14 10:34:15:138 | [INFO] | | OOBE | DE | | | | 9384 | *=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*
01/14/14 10:34:15:138 | [INFO] | | OOBE | DE | | | | 9384 | Installer Operation: PayloadInstaller
01/14/14 10:34:15:138 | [INFO] | | OOBE | DE | | | | 9384 | *=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*
01/14/14 10:34:15:138 | [INFO] | | OOBE | DE | | | | 9384 | Request to install payload
01/14/14 10:34:15:161 | [INFO] | | OOBE | DE | | | | 9384 | Payload Adobe CSXS Infrastructure 4_4.0.2_AdobeCSXSInfrastructure4-mul 4.0.2.0 {45C5DE59-4DB4-4A96-84E1-93C59BD5C4AE}: Calling ARKEngine from path C:\Program Files (x86)\Common Files\Adobe\OOBE\PDApp\DECore\DE6\resources
01/14/14 10:34:15:295 | [INFO] | | OOBE | DE | | | | 9384 | Extracting assets complete. Number assets: 2
01/14/14 10:34:15:295 | [INFO] | | OOBE | DE | | | | 9384 | CustomizedPatch property not found in database
01/14/14 10:34:15:295 | [INFO] | | OOBE | DE | | | | 9384 | Beginning installation for payload at C:\Users\fjcranston\AppData\Local\Temp\Adobe\AAMUpdater\AdobeCSXSInfrastructure4-4\4.0.2\ setup\payloads\AdobeCSXSInfrastructure4-mul-261213100542\Install.db
01/14/14 10:34:15:340 | [ERROR] | | OOBE | DE | | | | 9384 | DF045: File corruption detected. Re-install the product & then apply the patch again. (Can not repair file "C:\Program Files (x86)\Common Files\Adobe\CEPServiceManager4\zlib1.dll")(Seq 4)
01/14/14 10:34:15:340 | [WARN] | | OOBE | DE | | | | 9384 | DW063: Command ARKPatchCommand failed.(Seq 4)
01/14/14 10:34:15:341 | [INFO] | | OOBE | DE | | | | 9384 | Completing installation for payload at C:\Users\fjcranston\AppData\Local\Temp\Adobe\AAMUpdater\AdobeCSXSInfrastructure4-4\4.0.2\ setup\payloads\AdobeCSXSInfrastructure4-mul-261213100542\Install.db
01/14/14 10:34:15:437 | [INFO] | | OOBE | DE | | | | 892 | *=*=*=*=*=*=*=*=*=*=*=*=*=*=*=* Operation complete. Setting status: 2 =*=*=*=*=*=*=*=*=*=*=*=*=*
01/14/14 10:34:15:437 | [INFO] | | OOBE | DE | | | | 892 | :: END TIMER :: [Payload Operation :{45C5DE59-4DB4-4A96-84E1-93C59BD5C4AE}] took 308.934 milliseconds (0.308934 seconds)
01/14/14 10:34:15:442 | [INFO] | | OOBE | DE | | | | 892 | User specified overrideFile:
01/14/14 10:34:15:446 | [INFO] | | OOBE | DE | | | | 892 | The csu inventory was not updated for payload Adobe CSXS Infrastructure 4_4.0.2_AdobeCSXSInfrastructure4-mul 4.0.2.0 {45C5DE59-4DB4-4A96-84E1-93C59BD5C4AE}, value of local var is -1
01/14/14 10:34:15:446 | [INFO] | | OOBE | DE | | | | 892 | Calling the ROLLBACK custom action code for pre-install for payload Adobe CSXS Infrastructure 4_4.0.2_AdobeCSXSInfrastructure4-mul 4.0.2.0 {45C5DE59-4DB4-4A96-84E1-93C59BD5C4AE}
01/14/14 10:34:15:446 | [INFO] | | OOBE | DE | | | | 892 | ::START TIMER:: [Pre payload :{45C5DE59-4DB4-4A96-84E1-93C59BD5C4AE}]
01/14/14 10:34:15:450 | [INFO] | | OOBE | DE | | | | 892 | In PrePayloadInstallProc
01/14/14 10:34:20:455 | [INFO] | | OOBE | DE | | | | 892 | Custom action return code: 0
01/14/14 10:34:20:455 | [INFO] | | OOBE | DE | | | | 892 | :: END TIMER :: [Pre payload :{45C5DE59-4DB4-4A96-84E1-93C59BD5C4AE}] took 5008.83 milliseconds (5.00883 seconds)
01/14/14 10:34:20:461 | [INFO] | | OOBE | DE | | | | 892 | No operation. We're done:
01/14/14 10:34:22:466 | [INFO] | | OOBE | DE | | | | 892 | Total components installed: 0
01/14/14 10:34:22:466 | [INFO] | | OOBE | DE | | | | 892 | Total components repaired: 0
01/14/14 10:34:22:466 | [INFO] | | OOBE | DE | | | | 892 | Total components removed: 0
01/14/14 10:34:22:466 | [WARN] | | OOBE | DE | | | | 892 | DW050: The following payload errors were found during install:
01/14/14 10:34:22:466 | [WARN] | | OOBE | DE | | | | 892 | DW050: - Adobe CSXS Infrastructure 4_4.0.2_AdobeCSXSInfrastructure4-mul: Install failed
01/14/14 10:34:22:466 | [INFO] | | OOBE | DE | | | | 892 | Call PostSession Custom Hook
01/14/14 10:34:22:467 | [INFO] | | OOBE | DE | | | | 892 | ::START TIMER:: [Post session :{45C5DE59-4DB4-4A96-84E1-93C59BD5C4AE}]
01/14/14 10:34:22:474 | [INFO] | | OOBE | DE | | | | 892 | In InstallSessionCloseProc
01/14/14 10:34:22:474 | [INFO] | | OOBE | DE | | | | 892 | Custom action return code: 0
01/14/14 10:34:22:474 | [INFO] | | OOBE | DE | | | | 892 | :: END TIMER :: [Post session :{45C5DE59-4DB4-4A96-84E1-93C59BD5C4AE}] took 7.32732 milliseconds (0.00732732 seconds)
01/14/14 10:34:22:474 | [INFO] | | OOBE | DE | | | | 892 | :: END TIMER :: [Total Timer] took 17948.1 milliseconds (17.9481 seconds) DTR = 32.984 KBPS (0.032211 MBPS)
01/14/14 10:34:23:475 | [INFO] | | OOBE | DE | | | | 892 | -------------------------------------- Summary --------------------------------------
01/14/14 10:34:23:475 | [INFO] | | OOBE | DE | | | | 892 | - 0 fatal error(s), 1 error(s)
01/14/14 10:34:23:475 | [INFO] | | OOBE | DE | | | | 892 | Win OS version: 6.1.1.0 64 bit Type: 1
01/14/14 10:34:23:475 | [INFO] | | OOBE | DE | | | | 892 |
01/14/14 10:34:23:475 | [INFO] | | OOBE | DE | | | | 892 | ----------- Payload: Adobe CSXS Infrastructure 4_4.0.2_AdobeCSXSInfrastructure4-mul 4.0.2.0 {45C5DE59-4DB4-4A96-84E1-93C59BD5C4AE} -----------
01/14/14 10:34:23:475 | [INFO] | | OOBE | DE | | | | 892 | ERROR: DF045: File corruption detected. Re-install the product & then apply the patch again. (Can not repair file "C:\Program Files (x86)\Common Files\Adobe\CEPServiceManager4\zlib1.dll")(Seq 4)
01/14/14 10:34:23:475 | [INFO] | | OOBE | DE | | | | 892 |
01/14/14 10:34:23:475 | [INFO] | | OOBE | DE | | | | 892 | Please search the above error string(s) to find when the error occurred.
01/14/14 10:34:23:475 | [INFO] | | OOBE | DE | | | | 892 | These errors resulted in installer Exit Code mentioned below.
01/14/14 10:34:23:475 | [INFO] | | OOBE | DE | | | | 892 | -------------------------------------------------------------------------------------
01/14/14 10:34:23:475 | [INFO] | | OOBE | DE | | | | 892 |
01/14/14 10:34:23:475 | [INFO] | | OOBE | DE | | | | 892 | Exit Code: 7 - Unable to complete Silent workflow.
01/14/14 10:34:23:475 | [INFO] | | OOBE | DE | | | | 892 | Please see specific errors for troubleshooting. For example, ERROR: DF045 ...
01/14/14 10:34:23:475 | [INFO] | | OOBE | DE | | | | 892 | *=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*
01/14/14 10:34:23:475 | [INFO] | | OOBE | DE | | | | 892 | END - Installer Session
01/14/14 10:34:23:475 | [INFO] | | OOBE | DE | | | | 892 | *=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*

I'm unable to install the new version as the old version cannot be removed, anyone else had this problem?

Everytime I try to install the new version of iTunes, the installation doesnt complete and says that the old version cannot be removed from my PC, does anyone know of a way around this? I've tried manually uninstalling but I keep gettingo a message saying that I dont have access to the file?
Thanks

(1) Download the Windows Installer CleanUp utility installer file (msicuu2.exe) from the following Major Geeks page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page):
http://majorgeeks.com/download.php?det=4459
(2) Doubleclick the msicuu2.exe file and follow the prompts to install the Windows Installer CleanUp utility. (If you're on a Windows Vista or Windows 7 system and you get a Code 800A0046 error message when doubleclicking the msicuu2.exe file, try instead right-clicking on the msicuu2.exe file and selecting "Run as administrator".)
(3) In your Start menu click All Programs and then click Windows Install Clean Up. The Windows Installer CleanUp utility window appears, listing software that is currently installed on your computer.
(4) In the list of programs that appears in CleanUp, select any iTunes entries and click "Remove", as per the following screenshot:
(5) Quit out of CleanUp, restart the PC and try another iTunes install. Does it go through properly this time?

The new version downloads, but I never get a prompt to move the new version to the apps folder.

The new version of firefox has several steps to complete the download. The new version does download, but I am unable to move it to the app. folder. I get no prompt and the new firefox won't move.

Did you select custom when installing?

I updated to Firefox 5, "about Firefox" shows the new version in the browser window, but my shortcut buttons still show "Firefox 4.0 Beta 10"

I updated to Firefox 5, under the help button in the browser "about Firefox" shows the new version, but my shortcut buttons on my monitor still show "Firefox 4.0 Beta 10". Most updates also update the shortcut buttons. Is there a way I can do this?

I just updated to Firefox 5. About Firefox shows me no version number at all. I had to look at Help > Troubleshooting Information to see the version number.
Update: I saw the version number after changing themes. I guess it depends on what theme you use.

Has Anyone Found the New Version of the iPod Radio Remote?

Similar Messages

Maybe you are looking for