Has anyone got OA Framework Tutorial working on R12 Jdev 10g?

I have successfully got the tutorial for OA Framework working on my Apps 11.5.10 install with very few problems.
I now have Apps R12 installed and have downloaded the correct Jdev 10g with OA Framework patch, but I am hitting some a number of errors. I can see that the tutorial code and documentation is the same as Jdev 9i, and has not been updated. Taking this in to account I am adapting the tutorial to the Jdev 10g, but I am hitting deployment problems in the local OC4J container, where AppsLogin is being requested and not found.
I therefore wonder whether anyone out there has got the tutorial to work in Jdev 10g?
I'm happy to try and figure it out for myself, but I would prefer to know that it is relatively straight forward to do.

Yes I'm getting the following error message:
oracle.apps.fnd.framework.OAException: Application: FND, Message Name: SECURITY_APPL_LOGIN_FAILED.
I have seen this elsewhere on the forum but they all relate to Jdev 9 on 11.5.10. I wanted to know whether anyone else had got OA framework tutorial working on R12 because then I know from that one fact whether it is possible on the code that Oracle has released; any problems I encounter are then likely to be setup/installation/config issues that I should be able to resolve myself.
I'm surprised that no one has yet just given me a 'yes' given the number of experienced developers on the forum.
BTW, the full stack trace is:
oracle.apps.fnd.framework.OAException: Application: FND, Message Name: SECURITY_APPL_LOGIN_FAILED. at oracle.apps.fnd.framework.server.OAExceptionUtils.processAOLJErrorStack(Unknown Source) at oracle.apps.fnd.framework.OACommonUtils.processAOLJErrorStack(Unknown Source) at oracle.apps.fnd.framework.CreateIcxSession.getEncryptedSessId(Unknown Source) at oracle.apps.fnd.framework.CreateIcxSession.createSession(Unknown Source) at runregion.jspService(_runregion.java:136) at com.orionserver.http.OrionHttpJspPage.service(OrionHttpJspPage.java:59) at oracle.jsp.runtimev2.JspPageTable.service(JspPageTable.java:453) at oracle.jsp.runtimev2.JspServlet.internalService(JspServlet.java:591) at oracle.jsp.runtimev2.JspServlet.service(JspServlet.java:515) at javax.servlet.http.HttpServlet.service(HttpServlet.java:856) at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:711) at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:368) at com.evermind.server.http.HttpRequestHandler.doProcessRequest(HttpRequestHandler.java:866) at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:448) at com.evermind.server.http.HttpRequestHandler.serveOneRequest(HttpRequestHandler.java:216) at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:117) at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:110) at oracle.oc4j.network.ServerSocketReadHandler$SafeRunnable.run(ServerSocketReadHandler.java:260) at oracle.oc4j.network.ServerSocketAcceptHandler.procClientSocket(ServerSocketAcceptHandler.java:239) at oracle.oc4j.network.ServerSocketAcceptHandler.access$700(ServerSocketAcceptHandler.java:34) at oracle.oc4j.network.ServerSocketAcceptHandler$AcceptHandlerHorse.run(ServerSocketAcceptHandler.java:880) at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:298) at java.lang.Thread.run(Thread.java:595)
Cheers
Andy

Similar Messages

  • Has anyone got cn8202temp_controller.vi to work?

    Hello,
    Has anyone got cn8202temp_controller.vi to work. I got it from the Ni website and I've been unable to get it to run right. If there is anyone out there that has got it to work please tell me how you did it. It has an error when you upload the parameters for the recipe. I have enclosed the vi if you want to take a look.
    Thanks for your time,
    Attachments:
    cn8202temp_controller.vi ‏605 KB

    Hey Jordan,
    Thanks for responding. The recipe I am using is start from room temperature (20ºC), ramp up to 100 ºC over a period of 15 minutes, remain there for 10 minutes, and then ramp up to 1200ºC over a period of 110 minutes, remain for 10 minutes, then ramp down to 20ºC over a period of 280 minutes. I ran through all the string codes in the program and the only two I can't validate is Run Recipe string $0101W065.0000G2 and the cancel recipe string $0101W063.0000G0
    I called and sent emails to Omega on this issue and their response is that they don’t do third party programming. I was hoping that by posting it on here that someone may have used the program and could confirm if it works or not and if it didn’t work could possible tell me what needs to be changed. I’m really beating my head against the wall here and use help from anyone.
    Thanks again.
    Kevin   

  • Has anyone got PPTP VPN to work on Lion Server?

    Has anyone got PPTP VPN to work on Lion Server?
    I had a go with the terminal commnds posted by apple support but no joy. Since then Apple has pulled the suport article - is it because it didn't work?
    I get PPTP is less secure but PPTP seems to be more reliable don't know whey they can't keep as GUI. I've got them both running on our 10.4 server and L2TP stoped allowing connections for no reason PPTP was still working L2TP started working again on its own. Plus L2TP drops my connection when I connect with a 2nd device e.g connected with my Macbook connect with my iPhone (different username) it drops my Macbook.
    Any advice getting PPTP to work on Lion Server would be appreciated
    Thanks
    Ben

    Hi,
    I have posted a bugreport on this issue to Apple. Currently (10.7.2) it is not possible to run PPTP on any Mac OS X Server when using a 10.7 Server as Directory Server.
    I have tried 'everything', but the MPPE encryption mechanism seems to be broken.
    Edit: I see now that the bugreport is filed as a duplicate to an older case, which is now closed. I hope this means they have found the problem and will release a fix in the next update.

  • Has anyone got the B500 to work with Ubuntu? (nvidia driver problems)

    In two weeks, I have been completely unable to get the nvidia driver working with the B500 on Linux. No matter what I try to do, the X server doesn't start, and my /var/log/Xorg.0.log file ends with "fatal server error: no screens found." I have tried feeding a custom modeline to xorg.conf, explicitly calling an EDID file which I extracted from the Windows installation, using the upstream nvidia driver installer, using the official repository driver, and probably a bunch of other stuff that I'm not recalling right now.
    Versions I've tried this on:
    Kubuntu 10.04, 32- and 64-bit
    Ubuntu 10.04, 32-bit
    Kubuntu 9.10, 32-and 64-bit
    I am stumped. Has anyone successfully gotten this to work?
    best,
    -p.
    Solved!
    Go to Solution.

    Solved with the kind assistance of paulricardomc on the Ubuntu Forums: http://ubuntuforums.org/showthread.php?t=1477507
    Short version of the fix:
    1. Extract the edid from the Windows partition using softMCCS, saving as edid.bin
    2. Save the edid.bin file in /etc/X11 (or wherever you like)
    3. Include the following in the device section of your xorg.conf:
    "Option"  "ConnectedMonitor" "DFP-0"
    "Option" "CustomEDID" "DFP-0:/etc/X11/edid.bin"
    Fire up X and you're good to go.

  • Has anyone got BTCONNET (POP) mail working?

    I already posted this in the touch forum, but after doing a bit of searching, realised that there is a specific forum for 'mail' under the iPhone section, so I am posting it here instead.
    I have had my Touch for just over a week and all is well, except MAIL. I just can't get it to work with my BTCONNECT (POP) account..
    I managed to get OUTGOING mails working.. But incoming is not working.. I get an error saying that it can't connect to my SMTP address. I have read a ton of posts from Google and tried everything, but its still not working...
    My outgoing address is "smtp.btconnect.com", but I found a page from Apple themselves say that it should be "smtp.o2.co.uk", but this doesn't work.. To be honest, I don't see why it would, as this is a Touch not an iPhone (but the doc says that its for both), but I tried it never the less.
    I did find one post from someone who had this problem and used iTunes to 'sync' his mail account.. I hoped this would work, but when i tried, nothing happened.. I even deleted my account from the Touch, selected my Outlook account under iTunes and did Sync. Whilst iTunes says its done it.. Nothing happens.
    I should point out that for this test, I am at home, using the same connection that my Laptop (Which is able to send/recieve mail) is on.
    I am starting to think I am wasting my time and just wondered if anyone in the UK has sucessfully got BTCONNECT mail working?
    My fingers are crossed that someone can help
    Jon

    Just a note to everyone to thank you for your help and let you know that I cracked it. I figured I should post, incase anyone comes looking for a solution (I just wished I had not spelt BTCONNECT, BTCONNET in the title).
    I stumbled upon a post on another forum from a guy who claims to have it working and has helped others.. I got in contact with him and he has shown me what he has done. It looks like there is a quirk (I would call it a bug) in the way that the iPhone/Touch handles SMTP.
    It turns out that for BTCONNECT (And I suspect others) to work, you need OTHER SMTP servers in the list.. Even if they are not right.. withouth them, it simply doens't work.. But as soon as you add 2 'others' it just magically works.
    The best way to get BTCONNECT mail working is like this:
    1. Disable Wifi
    2. Delete existing accounts
    3. Add new 'Other' account
    4. Enter the following (Using a made up name as an example):
    Name: Your Name
    Address: [email protected]
    Password: <Your Password>
    5. Save
    6. Select 'POP'
    7. Add Incoming Server Details:
    Host Name: pop3.btconnect.com
    User Name: john.smith
    Password: <Your Password>
    8. Add Outgoing Server Details
    Host Name: smtp.btconnect.com
    User Name: Leave Optional
    User Name: Leave Optional
    9. Save
    Now at this point, it goes off to verify SMTP info and will fail (not only becuase WiFi is off, but it fails even if Wifi is ON). You now get asked whether you want to try turning SSL on.. If you hit NO, it goes off and tries again and never finishes.. If you say YES it ends with an error.. But alteast you can save it.
    The point is, just say YES and then you will get a option to Save.
    10. Now you have saved, go back into your mail config and select the Primary Outgoing Server.. Here you want to change/verify:
    SSL = OFF
    Authenitication: Password
    Port = 25
    11. At this point it should work.. And I got here on my own many times and it doesn't.. What you need to do is adds some 'other SMTP servers'.
    I was given the advice to add "mail.btinternet.com", but my conclusion is that it doens't matter... On mine, I now have 2 "other" addresses (both pointing to SMTP.BTCONNECT.COM).. If I go into them, they are wrong, as SSL = ON and worse, they are grey so I can't change them or delete them.
    I got it in this state after a lot of playing, and I know its not right, but since mine is working, I am not changing it.
    This is the area you want to focus on.. You need to get 1 x Primary Server (SMTP.BTCONNECT.COM) and 2 x 'other' Servers (Point them to SMTP.BTINTERNET.COM if you like).
    I don't know why.. I don't know how but this works!!
    If I write a mail and send it, it goes instantly.. So you know that its working straight away..
    Oh yes.. Turn WiFi on NOW, before you test.. I forgot at one point and almost gave up again...
    I know this sounds stupid and you would think that it doesn't make any difference, but it does.. Not only did this work for me, but its also worked for several other people I know who also had problems getting SMTP working.
    Good luck and I hope this helps someone
    Jon
    Message was edited by: jweaver100

  • Has anyone got BTCONNECT (POP) mail working on their Touch?

    I have had my Touch for just over a week and all is well, except MAIL. I just can't get it to work with my BTCONNECT (POP) account..
    I managed to get OUTGOING mails working.. But incoming is not working.. I get an error saying that it can't connect to my SMTP address. I have read a ton of posts from Google and tried everything, but its still not working...
    My outgoing address is "smtp.btconnect.com", but I found a page from Apple themselves say that it should be "smtp.o2.co.uk", but this doesn't work.. To be honest, I don't see why it would, as this is a Touch not an iPhone (but the doc says that its for both), but I tried it never the less.
    I did find one post from someone who had this problem and used iTunes to 'sync' his mail account.. I hoped this would work, but when i tried, nothing happened.. I even deleted my account from the Touch, selected my Outlook account under iTunes and did Sync. Whilst iTunes says its done it.. Nothing happens.
    I should point out that for this test, I am at home, using the same connection that my Laptop (Which is able to send/recieve mail) is on.
    I am starting to think I am wasting my time and just wondered if anyone in the UK has sucessfully got BTCONNECT mail working?
    My fingers are crossed that someone can help
    Jon

    Just for continuity and incase anyone else has this problem, I have posted a solution here:
    http://discussions.apple.com/messageview.jspa?messageID=9405022&stqc=true

  • Has anyone got gma3650 or gma3600 working?

    Hi,
    I'm currently considering buying this netbook:
    http://www.johnlewis.com/231577593/Product.aspx
    It has the dreaded gma3650 chipset, which seems to cause lots of issues.  I have found this on the wiki:
    https://wiki.archlinux.org/index.php/Intel_gma3600
    Just wanted to see if anyone else has got this working before I splash the cash.
    Many thanks in advance.

    My advice... stay away. Far away. Fbdev doesn't give you any acceleration whatsoever. There's the emgd driver, but if you'll get that one to work is a very big *if*.

  • Has anyone got mental ray to work on qmaster?

    I keep getting segment failed messages on some machines when i render mental ray it spends about half an hour rendering two tga frames which are only 4k and can't be opened, if i lower the resolution and set it only to do 10 frames it works, its got me flumuxed does anyone know is mental ray satellite any better. It works fine incidently if i render with software renderer. Incidently i know you have to put -r rm in the settings. but any ideas would be appreciated

    ok got it to work easiest way is to make sure the shared drive is mounted on all machines and put all files i.e textures and mb file on there too and in the qmaster make sure you specify the working directory as the shared drive as well as the project directory

  • Has anyone got Push mail to work after migration t...

    Has anybody sucessfully got Push mail working after migration from BT Yahoo mail to the new BT Mail server?
    I'm still on the old BT Yahoo mail server and Push mail works fine on my iPhone
    But people have told me that once migrated to the new BT Mail server, Push mail isn't available
    BT tell me that it is, but there's a couple postings on the web saying Push mail won't work
    So, my question is, is there somebody out there who who has been migrated to the new BT Mail server and who can confirm they can still get their @btinternet.com address post-migration to work as Push mail on their iPhone or ipad devices?

    There is no push mail on BTMail. Once you have been migrated to BTMail you will need to have your devices fetch emails. There is apparently no plans to change this.

  • Has anyone got Time Machine to work with Time Capsule?

    I've been trying for days to do an initial backup without success. Everything seems to be working fine and then it just stops and says the backup has "failed." The last one went 24 hours and backed up about 90 GB before it just stopped. Then it has to start over, from the beginning. (This thing is so slow you'd think somebody was writing the files out in longhand!) I even moved my iMac into the room with the Time Capsule, which is actually pretty annoying, in case it was a case of a dropped signal.

    Hi,
    I've spent hours and hours trying to get the harddisk to work properly. Set-up was easy-peasy and the Airport works great for the internet. However, when trying to use time-machine and the hard disk it was a nightmare !!! Each attempt at the back-up failed after about 4 gig with a 'unable to mount volume' error. If I re-tried, it failed. Following some of the tips on the forums, I deleted the back-up file created by time machine on the hard drive and the initial back-up started successfully but failed after about 4 gig again (I had 96 gig to back-up). There are various fixes flying around - ensure you have a name for your computer - should be short and no spaces or funny characters. Same goes for your name of the timecapsule. Some people are saying you should use an ethernet cable for your first back-up but that should not matter at all. I took mine back to the apple store in the end - a mac genius downloaded all the latest patches (only came out 19th march) for the time-capsule firmware, time machine software and airport express. Still didn't work, so conclusion was the time-capsule was knackered !!! SO MY RECOMMENDATION IS TO GET APPLE TO REPLACE IT BUT MAKE SURE YOU TRY THE ABOVE FIRST.
    New time-capsule was attached to my imac, started up great first time. My initial back-up ran through perfectly first time through wireless - it took 15 hours but I did have 96 gig to back-up. time machine sees this no problem so it looks like everything is fine.
    Good luck !!

  • SECOND QUESTION - HAS ANYONE  GOT ELEMENTS EDITOR NOT WORKING - ON WINDOWS 8.1?

    I Get message -  when i try to open elements 12 editor... a problem caused program to stop working correctly. Windows will close program and notify if a solution is available -- no response after 2 weeks - anyone help please? john reid

    Microsoft advises that version 7 of PSE will work with Windows 8. The best option is a new computer with W8 and then do a clean install of Elements. Some difficulties may arise if upgrading the operating system on top of existing software. In those circumstances make sure you have your original disks or your download package, in case a re-install is necessary.
    Microsoft Windows 8 compatibility.

  • Has anyone got BT broadband talk working with a 3r...

    I would like some assistance if possible? i use an AVM Fritz Box 7270 and subscribe to BT broadband with calls. I currently dont use the BB talk as i have never got it working. Is it possible? how on earth do i get it working?
    An idiots guide to getting this working would be preferable!!
    Many thanks..

    Guides are here:
    http://www.jarviser.co.uk/jarviser/repeaterhubphone.html
    Hope this helps(?)

  • Has anyone got 3D turbo to work???

    From what I have seen on this board no one has. If you have tell me how.

    I have had it working without problems but each time I have had a fresh install of the OS or it was on an initial build of a system. There are incompatabilities that exist and there is a list of the supported cards in the "Sticky" "Bulletin" thread at the top of this section of the forum.

  • Has anyone got ATT Lumia 920 work on T-Mobile netw...

    Hi there, I just got my Lumia 920 ATT unlocked, I got the 20 digits unlock code from ATT customer service. But I found it cannot get any signal after I push my T-Mobile SIM card in, it says "No service" and the signal bar is grayed out with a forbidden sign on it, even if I choose to join a network manually in celluar settings page. The most strange thing is, if I call someone using the T-Mobile SIM card, the signal comes back, and the call could be connected successfully, but after hang up, signal is gone again.
    Any ideas? Thanks in advance.

    strange.
    so long as you put the tmo sim, then responded with the unlock code when prompted, you should be able to get good signal.
    have you tried to do a reset of the device first?
    when you put the tmo sim in the device, it should auto-configure the network used.
    if not, try getting the lumia pusher like scoobyman said and be sure that the you do what he said. it should allow you to manually set-up the network. so not sure why you cannot set it up.

  • Has anyone got Time Machine to work with a ReadyNA...

    I have a Netgear ReadyNAS Duo (with the latest firmware) set up as a Time Machine destination but neither of the two MacBooks in the house (both running Snow Leopard) can find the ReadyNAS in Time Machine whether over WiFi or on a wired connection. It's visible in Finder, but not in Time Machine. I should also add that if I connect the ReadyNAS directly to the MacBook via Ethernet, Time Machine immediately finds it.
    Research would suggest that there is a problem with Home Hub 3.0 and Apple's Bonjour service but there doesn't seem to be any definitive solution. One option seems to be to connect a second wireless router using the 192.168.0.xxx address range to the Home Hub and use its WiFi connection; and another seems to be to install an Apple Airport Extreme base station in place of the Home Hub.
    Anyone had the same problem and come up with a solution? 

    sjdigital wrote:
    I have a Netgear ReadyNAS Duo (with the latest firmware) set up as a Time Machine destination but neither of the two MacBooks in the house (both running Snow Leopard) can find the ReadyNAS in Time Machine whether over WiFi or on a wired connection. It's visible in Finder, but not in Time Machine. I should also add that if I connect the ReadyNAS directly to the MacBook via Ethernet, Time Machine immediately finds it.
    Research would suggest that there is a problem with Home Hub 3.0 and Apple's Bonjour service but there doesn't seem to be any definitive solution. One option seems to be to connect a second wireless router using the 192.168.0.xxx address range to the Home Hub and use its WiFi connection; and another seems to be to install an Apple Airport Extreme base station in place of the Home Hub.
    Anyone had the same problem and come up with a solution? 
    Hi there,
    I've tried googling a little for you and found this article, showing how to set up TM on a network drive.
    Unfortunately, I don't have a HHv3 (I only had a v2, but I've replaced that with another router) so I cannot troubleshoot remotely for you.
    All I can suggest is trying the guide I posted and if this does not produce the results you require, then I would look at replacing the HH with another router.
    Sorry I can't be more help.

Maybe you are looking for