Has anyone got photostream to upload from a pc yet? Works fine between my MacBookPro and iMac and TO my PC's but not FROM my PC's

Same here. Seems to download great, but upload is a problem. Searched for some type of file size / type restriction, but the help pages do not seem to be in place yet.

Similar Messages

Has anyone gotten the automatic upload to YouTube to actually work?

I've read about a lot of people who have had trouble getting Compressor's "Publish to YouTube" to work properly, but no stories of anyone actually getting it to do it. Has anyone gotten it to work? And if so, how?

I have tried to get all of FCP's new social networking uploads to work, and they don't here. I just export the file, and use the Utube uploader. I don't think any of the sharing in FCS is ready for primetime:)

Has anyone got the AirPort Client Update 2009-00 to work

As I have frequently posted here SL has killed my Airport.
Having waited patiently for FOUR MONTHS Apple have finally issued AirPort Client Update 2009-00.
It makes no difference to me.
Has this actually worked for anyone?

In my case, I bought my MBP with Tiger then upgraded to SL and it made my airport behave randomly soo I opted to roll back the OS until a fix is made to the issue.

HAS ANYONE GOT THE FLASHPLAYER ON A IPHONE 4 PLEASE

HAS ANYONE GOT THE FLASHPLAYER ON YOUR IPHONE 4 PLEASE OR WISH ONE WILL PLAY THE TWITTER MOVIES PLEASE?

iOS devices do not support Flash.

Hello, I have a strange file in my Users folder, named PortDetect.log I have no idea which app created it and it reappears when I delete it. Has anyone got the same file? Or know where it may originate from? Thanks in advance!

Hello,
I have a strange file in my Users folder, named PortDetect.log
I have no idea which app created it and it reappears when I delete it.
Has anyone got the same file? Or know where it may originate from?
Thanks in advance!

know where it may originate from?
The Huawei wireless modem driver.

I can not open email attachment which is sent from a swann dvr using apple mail since i upgraded to Yosemite ,has anyone got a fix ? the file format is _mnt_tmp_

i can not open email attachment which is sent from a swann dvr using apple mail since i upgraded to Yosemite ,has anyone got a fix ? the file format is _mnt_tmp_

Oh no... NOT THE 99-PAGER!!! Anything but THAT!!!

I recently bought a Samsung Galaxy s5 and cannot receive iMessages from iphones, I have deleted my apple id, turned off imessage, turned off spam messages on my android device, wasted 35 minutes on the phone to Apple's 'Support' has anyone got any tips?

I recently bought a Samsung Galaxy s5 and cannot receive iMessages from iphones, I have deleted my apple id, turned off imessage, turned off spam messages on my android device, wasted 35 minutes on the phone to Apple's 'Support' has anyone got any tips?

Hi,
Do you mean you are not getting SMS text messages now ?
If so start here
Follow the Account management options until you are offered and email contact.
Explain the issue via email as only someone in Support can now remove your iPhone Number from iMessages if it has not "de-registered" itself correctly.
8:28 pm Wednesday; May 7, 2014
 iMac 2.5Ghz i5 2011 (Mavericks 10.9)
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb (Snow Leopard 10.6.8)
 Mac OS X (10.6.8),
 Couple of iPhones and an iPad

Has anyone got a script to read a list of email addresses from a Mail message and put them into a group in Contacts?

Has anyone got a script to read a list of email addresses from a Mail message header and put them into a group in Contacts?

Now Tony, I know you can't hear my tone on a forum post but I was not complaining, simply stating facts . This change brought several people in my office to a grinding halt in a long established workflow that is really rather simple (and I thought was already assumed from the original post above ):
1) Select a set of records in FileMaker Pro 12 and export only their e-mail addresses as a CSV file.
2) Open that CSV file in Excel.
3) Copy the column of e-mail address.
4) paste into the appropriate recipient field in Mail.
5) Send
If I were to complain it would be about Apple's typically opaque approach to updates. There is no granular explanation of why changes were made or even "what" changes were made.
Complaining is futile since Apple is Apple and is unlikely to change, but sometimes it is cathartic to "shout into the void" .
I had thought about doing something with a formula in Excel and your suggestion was simple and helpful. Again, however, it is only a workaround for a long established helpful behavior that Apple has inexplicably broken/removed in Mavericks Mail.
I, and the other posters here, would love to have the capability back rather than have to add previously unneeded steps to our workflows.
Ultimately we may add scripting steps to the FileMaker side to export the address lists with commas inserted already if Apple ends up having permanently removed this feature.

Has anyone got cn8202temp_controller.vi to work?

Hello,
Has anyone got cn8202temp_controller.vi to work. I got it from the Ni website and I've been unable to get it to run right. If there is anyone out there that has got it to work please tell me how you did it. It has an error when you upload the parameters for the recipe. I have enclosed the vi if you want to take a look.
Thanks for your time,
Attachments:
cn8202temp_controller.vi ‏605 KB

Hey Jordan,
Thanks for responding. The recipe I am using is start from room temperature (20ºC), ramp up to 100 ºC over a period of 15 minutes, remain there for 10 minutes, and then ramp up to 1200ºC over a period of 110 minutes, remain for 10 minutes, then ramp down to 20ºC over a period of 280 minutes. I ran through all the string codes in the program and the only two I can't validate is Run Recipe string $0101W065.0000G2 and the cancel recipe string $0101W063.0000G0
I called and sent emails to Omega on this issue and their response is that they don’t do third party programming. I was hoping that by posting it on here that someone may have used the program and could confirm if it works or not and if it didn’t work could possible tell me what needs to be changed. I’m really beating my head against the wall here and use help from anyone.
Thanks again.
Kevin

My apps will not download to ipad2 this is something that has just recently happened.Have switched the pad on and off holding buttons down but it makes no difference.Has anyone got the solution to this problem Thank you.

My apps will not download to iPad 2 This is something that has just recently happened. Have tried re-booting but that makes no difference .
Has anyone got the answer to this problem please or do I need to take it into an Apple store Thanking you.

If all of that stuff checks out - and iTunes is telling you that the apps have been downloaded to the iPad - try this.
Connect your iPad to your computer and launch iTunes. Right click on your iPad name on the left side of iTunes under devices and select Transfer Purchases from the pop up menu. Then sync with iTunes again. Don't eject the iPad yet. If you still don't see the apps on the iPad - click on the Apps Tab in the iTunes window on the right and see if they show up on any of the iPad screens. If they do - make sure that all of the apps are selected (checked) to sync - (checkmarks in the boxes next to the app names) - check to make sure that the Sync Apps heading is checked and as well and then sync again. You may have to click on Apply in the lower right corner of iTunes if the apps were not selected to sync.

HT1386 hi - i have recently upgraded to an iphone and find that when i open my MS Outlook on my computer, the emails that were on the iphone get wiped out. Has anyone got a solution to this problem? I'm sure it's very simple when you know the answer! Than

hi - i have recently upgraded to an iphone and find that when i open my MS Outlook on my computer, the emails that were on the iphone get wiped out. Has anyone got a solution to this problem? I'm sure it's very simple when you know the answer! Thanks.

Pay no attention to iinami, the amount of replies to people saying their handsets must have been jailbroken everytime iTunes throws out an error is tremendous. (Clearly you don't need to have any real knowledge to get to level 3 on these forums, let's hope apple's geniuses know a lot more than some of their customers.)
http://support.apple.com/kb/TS3694
Solution below.
Error 9
This error occurs when the device unexpectedly loses its USB connection with iTunes. This can occur if the device is manually disconnected during the restore process. This issue can be resolved by performing USB troubleshooting, using a different USB dock-connector cable, trying another USB port, restoring on another computer, or by eliminating conflicts from third-party security software.

Has ANYONE got a 'faulty' superdrive to work without replacing it?

There are many tales of people here with dodgy sauperdrives. Now I have one in a 2 year old eMac. So before I spend money replacing the superdrive, has anyone got their's going by way of software or cleaning or dancing around their Mac chanting to the sky?
Steve

yep,
there are lots of ways to do this in logic. straight off the top of my head (so it won't necessarrily be the best way)
set your loops up in individual exs insts
transform midi note to controller 7 with a trasnformer in environment, mapped note to midi channel.
now when you hit the right key, it will turn the note into controller message to open the volume on the exs instrument with the right midi channel.
you will need a 'master' note to turn on your loops in the exs inistruments. obviously this needs to be connected outside of the transform to midi channel.
if you need to more than 16 loops, you can put a transformer before 'notes to controller 7' to split the messages by their key range. sounds complicated but is really easy, no harder in fact than programming VCR.
you will need a master instrument to run all this from in arrange. i would have used a single channel midi instrument in environemnt new>instrument.
my method will work but there maybe a way to set everything up in an exs instance, but i not sure how you would do that so it didn't retrigger rather than open up the volume on the part of the loop you want.
my way will work though.

Has anyone got Safari to work with Kerberos (SPNEGO) ?

Has anyone got Safari to with using Negotiate (SPNEGO with Kerberos) when the system is not bound to ActiveDirectory or Macs OpenDirectory?
I can load Firefox and it works fine, but Safari does not work. I keep hearing that Safari works out of the box, but its looks like its somehow tied to AD or Macs Opendirectory and its deployment of Kerberos.

I am having the same problem and checked out the Apple Discussions for a solution.
I too am meticulous with my addresses.
Seeing no solution I went back to testing.
I have tried:
From Shrewsbury
To Telford
The result was a trip in the US taking 14 hours.
Then I tried:
From Shrewsbury UK
To Telford UK
This worked.
When on the "Get Directions" screen there is a "Globe" icon by the "Space" icon. Pressing this brings up "English (US)". Press again and you get "English (UK).
Any ideas?
When I use the "Contacts" to get the Start and End fields the iPhone is bringing up the correct address but with "United States" at the end of the address.
Again any ideas?
In my Address book I never use the "Country" field as all my contacts are in the UK. I wonder if this is the problem and the iPhone is defaulting to US in the absence of no "Country"?
Help!

Has anyone got the Comsoft Profinet example code working??

Hello!
I have a cRIO Profinet card and I'm attempting to get the example code working.
I have followed the instructions in GettingStarted_cRIO_PN_IO_Device.pdf
I have created an empty project with just the 9023 and 9113 present, and copied the 3 items from the example project cRIO PN IO-Device (LV 2012) as per the documentation.
When I try to compile I get the error shown attached. I cannot view the error as the VI is password protected.
In 5 years of working with cRIO using many different c-series modules from NI and 3rd parties I have never come across a password protected example Vi - this is very disappointing! I don't see how it will be possible to use the card without being able to access this VI, and clearly it is impossible to use it without this VI as they are unwilling to share its functionality.
Has anyone got this working on anything other than a 9104 (which the example uses?) Does anyone know the password? Is it possible to use the card without using this example code?
I will be communicating with a Siemens PLC (acquiring a load of U16s and logging on the cRIO at 20ms intervals).
Many thanks for any input, or any experiences of using this card.
Aaron
LabVIEW/RT/FPGA 2012
NI-RIO 12.0.1
cRIO 9023 controller and 9113 chassis with COMSOFT PN module in slot 1.
Attachments:
PN_error.png ‏44 KB
PN_error2.png ‏20 KB

Just for the record, I am using the CRIO-PN with cRIO-9081 and cRIO-9068 integrated chassis successfully.
LabVIEW (RT/FPGA) 2013 SP1.
I didn't use the higher level ComSoft example code directly, as the VIs use so many control/indicators that the FPGA usage is sky high. I rewrote them to pass the I/O data via DMA FIFOs.

Has anyone got a "runtime error" when trying to search in itunes store?

has anyone got a "runtime error" when trying to search itunes store?

I assume since you are posting in the iTunes U for iOS forum that you are having issues with the IOS version of the app. What is the exact error message?
Can you participate in a course's discussion from iTunes U's Course Manager (https://itunesu.itunes.apple.com/coursemanager/)?

Has anyone got photostream to upload from a pc yet? Works fine between my MacBookPro and iMac and TO my PC's but not FROM my PC's

Similar Messages

Maybe you are looking for