Has anyone got Thunderbird/Ovi sync to work?

Been trawling through posts discussing error "80043c93" when trying to sync with Thunderbird.
As they seem to mainly consist of people experiencing the issue with no feedback from Nokia, I was hoping it might be possible to find an OS/thunderbird/Ovisuite version combination that might work reasonably reliably.
Failing that, are there any plans to allow Ovisuite the old fallback of flat file import/export?
Any assistance at getting some rudimentary sync capabilities (contacts, at least) would be most appreciated - am even up for bespoke/non-nokia syncing solutions that support the E72.
Thanks in advance.

I have a new E63 and I use Thunderbird on Windows Vista.
Trying to get any kind of sync seems impossible.
The 'PC Suite' installed, connected to the phone, and seemed to do a sync.
Despite saying things like '69 contacts synced successfully ...' - nothing had actually happened. So I tried Ovi Suite.
Nokia says you can install one over the other, so I did.
Ovi Suite installed and ran successfully but the error 80043c93 came up and ... no sync.
I uninstalled 'everything Nokia', turned off, unplugged, etc.
I then did a completely clean install of Ovi Suite from a newly downloaded copy (just in case).
Exactly the same result.
This is categorically a major failing (bug) with the software.
The real problems, as I see it, are these:
1) Cryptic error codes with no help or guidance in the software itself; and
2) a seeming lack of responsiveness from Nokia themselves.
I cannot find any other sync solution at present so I shall have to abandon my efforts.
I am very pleased with my Nokia phone but it is hurt by this poor software and support.
I am not overly cynical but this 'upgrade' to PC Suite seems to be wholly geared to
leveraging cash flow from the Ovi store/library rather than helping/empowering users.

Similar Messages

Has anyone got a Sony EX3 to work in this program?

Has anyone got a Sony EX3 to work in this program?

yep,
there are lots of ways to do this in logic. straight off the top of my head (so it won't necessarrily be the best way)
set your loops up in individual exs insts
transform midi note to controller 7 with a trasnformer in environment, mapped note to midi channel.
now when you hit the right key, it will turn the note into controller message to open the volume on the exs instrument with the right midi channel.
you will need a 'master' note to turn on your loops in the exs inistruments. obviously this needs to be connected outside of the transform to midi channel.
if you need to more than 16 loops, you can put a transformer before 'notes to controller 7' to split the messages by their key range. sounds complicated but is really easy, no harder in fact than programming VCR.
you will need a master instrument to run all this from in arrange. i would have used a single channel midi instrument in environemnt new>instrument.
my method will work but there maybe a way to set everything up in an exs instance, but i not sure how you would do that so it didn't retrigger rather than open up the volume on the part of the loop you want.
my way will work though.

Has ANYONE got a 'faulty' superdrive to work without replacing it?

There are many tales of people here with dodgy sauperdrives. Now I have one in a 2 year old eMac. So before I spend money replacing the superdrive, has anyone got their's going by way of software or cleaning or dancing around their Mac chanting to the sky?
Steve

yep,
there are lots of ways to do this in logic. straight off the top of my head (so it won't necessarrily be the best way)
set your loops up in individual exs insts
transform midi note to controller 7 with a trasnformer in environment, mapped note to midi channel.
now when you hit the right key, it will turn the note into controller message to open the volume on the exs instrument with the right midi channel.
you will need a 'master' note to turn on your loops in the exs inistruments. obviously this needs to be connected outside of the transform to midi channel.
if you need to more than 16 loops, you can put a transformer before 'notes to controller 7' to split the messages by their key range. sounds complicated but is really easy, no harder in fact than programming VCR.
you will need a master instrument to run all this from in arrange. i would have used a single channel midi instrument in environemnt new>instrument.
my method will work but there maybe a way to set everything up in an exs instance, but i not sure how you would do that so it didn't retrigger rather than open up the volume on the part of the loop you want.
my way will work though.

Has anyone got there Nokia Email system working ?

I have the default email on my E71 working fine but the interface is nowhere near as nice as the Nokia one.
Unfortunately the Nokia one simply does not work as most people are finding.
Has anyone actually got this working properly and if you have, how ?

Based on your reply i tried it again, anyway, less than 24hours into it, it has failed me again, cant send or recive.
Looks like back to the standard one.
I bought the E71 for many reasons email being a main one, wish i had a Blackberry now as this is ridiculous and the blackberry one seems to work flawlessly
Cant believe Nokia cant even get there own email system working on there own phones. Quite ridiculous !!
Paul

Has anyone got Client (Mutual) Authentication to work with 6.0 SP2?

I 've been unsuccessful and was just wondering if anyone has done it...
Kirk

The questions is "Where do you get a root ca file for a verisign trial client cert?" I've looked everywere on verisign's site without luck. BEA support emailed me one but can't remember where/how they
got it....
Kirk
Paul Ferwerda wrote:
I think that the Server Certificate Chain File Name contains a sequential list of certificates, the first of which was used to sign the cert in the "Server Certificate File Name" and the last is self-
signed (ie a root ca). There is a minimum of 1 cert required in the Server Certificate Chain File Name (which would be the self-signed cert that signed the cert in the Server Certificate File
Name file. As you walk through the certs in the Server Certificate Chain File Name each cert is expected to be signed by the following cert (if there is one) and the last one must be self-
signed.
The Trusted CA file on the other hand is a collection of self-signed CAs on which no validation is performed and no relationship is assumed between the certs in that file. My guess is that
the code expects that each cert in the Trusted CA list is self-signed.
So the Server Certificate Chain File Name contains a chain and the Trusted CA File Name contains unordered self-signed certs.
Paul F.
On Thu, 2 Aug 2001 18:52:38 +0200, "Bart Jenkins" <[email protected]> wrote:
Kirk,
The PEM file we grabbed from the Verisign site worked in the "Server
Certificate Chain file name" entry but NOT in the "Trusted CA File Name"
entry. The guy at support in BEA thought it should have worked for both.
I'm sure I could append the "Trusted CA chain" to the PEM file that I'm
using for "Server Certificate Chain File name" and then I could use one file
for both...
Could you post yours or send it me via Email so I can have a backup? I'd be
curious to compare your rootCA list with mine. I'll use whichever has the
most entries. If my list has more rootCA certs in it I'll pass it along.
ok?
'preciate it.
Bart Jenkins
[email protected]
"Kirk Everett" <[email protected]> wrote in message
news:[email protected]...
So if the one you got off verisign didn't work, where did you get the onethat
worked? The one BEA sent me works for mutual auth.
Kirk
Bart Jenkins wrote:
Kirk,
My security expert found it buried deep in the Verisign site. Have
you
successfully tested the Mutual Authentication? The root CA we found onthe
Verisign Site allowed us to connect via HTTPS but failed on the 2-way
authentication.....test it...
I actually mailed the .PEM file we found from Verisign to BEA support
because I also had an issue open on this with them...it would be funnyif
they then turned around and mailed it to you...
If you get stopped...give me a shout...
good luck
Bart Jenkins
Globeflow SA
[email protected]
"Kirk Everett" <[email protected]> wrote in message
news:[email protected]...
Thanks. I finally got it working yesterday. Apparently, I was not
using
the
correct root ca. Support
mailed me the root ca they were using and everything works fine now.The
problem is that I still
don't know where on Verisign's site to go to get the root ca. Where
did
you
get yours from?
Kirk
Bart Jenkins wrote:
Kirk,
I've finally got it working today. I've got a Class 3 Verisign
certificate on the WLS 6 server and a personal Verisign Class 1 cert
on
the
client browser (IE 5.5) and am able to connect via HTTPS in 2-way,mutual
authentication. Tell me where you are blocked and I'll try to help.
Bart Jenkins, CTO
Globeflow SA
[email protected]
"Kirk Everett" <[email protected]> wrote in message
news:[email protected]...
I 've been unsuccessful and was just wondering if anyone has done
it...
Kirk

Has anyone got E71 or S60 VPN working to a Vigor r...

I am struggling to get VPN working to a Vigor 2600 router to allow MfE to contact our MS Exchange Server.
Am I wasting my time, or is there someone out there who has already succeeded and can tell me how to do this?
My most obvious problem is the lack of correlation between the VPN parameters in the Vigor, and the Questions in the Nokia VPN Policy Tool.
Any help would be greatly appreciated.

Hi
Did you get anywhere with this? I have the same router and can't get it working...

Has anyone got HK iSub v1. to work with Intel iMac?

System preferences does not see the device at all. Have tried different ports with and without USB hubs both through a Series 1.0 and Series 2.0 with no luck. Any suggestions? Or is it time to retire the thing? Pity though it sounds great and still looks good!
Any advice appreciated.
-RG

I had the same problem and got it straightened out at the local Genius Bar! Did you transfer your folders from a previous Mac on your Intel iMac? The prefs transferred over too and may be corrupt.
1) Create a new user and give it admin privledges
2) Under "Library", drag and drop the Audio (which may not be necessary) and Preference folders onto desktop.
Log out and restart.
Log back in as yourself and let it fly! By dragging the Prefs folder onto desktop, at restart your iMac rebuilds the Prefs and overwrites previous corrupted Prefs.
Now I need to figure out why my Sony CyberShot isn't recognized on my USBs! Maddening!

Has anyone got an iBook G3 to work with an iPhone hotspot?

hi! First question here, and its been a real headscratcher.
I have an iBook G3 with 128bits airport card (picking up and connecting to routers no problem)
I also have an iPhone 4 which I've used as a personal hotspot, providing internet to my Macbook pro for around year.
Now as you can imagine, I've discovered that although the G3 discovered my iPhone, when i enter the password and hit connect, i get a glorious error. It say it could not connect because of a problem with encryption.
After a lot of internet research, I discovered the old, original Airport card does not support WPA2 encryption, which annoyingly is the encryption my phone uses.
Ok, so options... 1 can i upgrade this card? 2 Can I download software (3rd party?) to get around this problem? 3 Can i tell my phone to use WEP encryption? 4 Can i use an external (usb?) Wifi adapter? Ive also seen the possibility of Bluetooth or USB tethering? 5 Would a Bluetooth adapter work?
Any advice or solutions/suggestions would be incredibly welcome. As i've discovered there are a lot of questions about this online but few working solutions.
iBook G3, 500Mhz, 256RAM, 10gb HDD

Hi, and welcome to Apple Support Communities.
Question: If you have a MacBook Pro, why are you wanting the iBook G3 (which is 11 years old at this point) to work with an iPhone hotspot?
Why not just use the MacBook Pro?
That said, the MAXPower device is available at Other World Computing, if you really want to try it:
http://eshop.macsales.com/item/Newer%20Technology/MXP2802GU2/
And if you'd rather use a cradle instead of plugging it directly into a port:
http://eshop.macsales.com/item/NewerTech/MXP2802NU2C/
To boost your speed a little, you may want to consider maximizing the RAM with a 512 MB module:
http://eshop.macsales.com/item/Other%20World%20Computing/100SO512328L/
Good luck.

Has anyone got dynamic version support to work with the HTML converter?

I have tried this for some time and followed all the guidelines, but it still don't work. Could someone post the HTML-code for a working applet that is converted with dynamic version support ?

Using 1.4.1_03
java -jar htmlconverter.jar -gui
selected directory, "Standard" template file, "Use any Java 1.4, or higher"
<html>
<body>


<OBJECT
    classid="clsid:8AD9C840-044E-11D1-B3E9-00805F499D93"
    WIDTH = 200 HEIGHT = 100
    codebase="http://java.sun.com/products/plugin/autodl/jinstall-1_4-win.cab#Version=1,4,0,0">
    <PARAM NAME = CODE VALUE = Version.class >
    <PARAM NAME="type" VALUE="application/x-java-applet;version=1.4">
    <PARAM NAME="scriptable" VALUE="false">
    <COMMENT>
     <EMBED
            type="application/x-java-applet;version=1.4"
            CODE = Version.class
            WIDTH = 200
            HEIGHT = 100
         scriptable=false
         pluginspage="http://java.sun.com/products/plugin/index.html#download">
             <NOEMBED>
          </NOEMBED>
     </EMBED>
    </COMMENT>
</OBJECT>


</body>
</html>

HT4759 Has anyone got outlook on windows icloud working with you OS devices?

I have my eamil account creates, and its is live, but I cannot get icloud to syncronize with the account. Any tricks out there? What about my business accounts? do I need to copy this over everytime? Any help would be well appreciated

DQDUDE wrote:
I have my eamil account creates, and its is live, but I cannot get icloud to syncronize with the account. Any tricks out there? What about my business accounts?
Business accounts should not be on a free service, unless you consider them to be worthless.
What is this email that won't sync, is it an iCloud account or some other?

Has anyone got the QT stand alone installer to work?

OK, Has anyone got the QT stand alone installer to work that has a problem getting IT6 to work also?
You can look at my original thread and see what I've been through: http://discussions.apple.com/thread.jspa?threadID=262511&tstart=0
and now am stuck with an old version of QT and no version of IT! Can't update iPod, can't do crap. How slow can Apple be to fixing whatever bug is in IT6?! It's obvious that alot of people are having trouble and many of us are having the exact same or similar problems. Apparently a call to support is no help.
Mark

I didget QT stand alone to install. I had the error -3 message. I unistalled itunes and quicktime. Then I reinstalled using my orginal ipod disc. I then was asked to upgrade to ipod 6 or something. Which I did. Still got the error -3. Then I got the QT stand alone to install by it self and every thing works great now. There was some thing stating if I wanted to "Unistall QT for windows" I said yes. There were some error associated with removing "QT for Windows" during the install but after that it works great. It took something like 20 min. for it to download when it took itunes only 7 min. to download earlier.

Has anyone got cn8202temp_controller.vi to work?

Hello,
Has anyone got cn8202temp_controller.vi to work. I got it from the Ni website and I've been unable to get it to run right. If there is anyone out there that has got it to work please tell me how you did it. It has an error when you upload the parameters for the recipe. I have enclosed the vi if you want to take a look.
Thanks for your time,
Attachments:
cn8202temp_controller.vi ‏605 KB

Hey Jordan,
Thanks for responding. The recipe I am using is start from room temperature (20ºC), ramp up to 100 ºC over a period of 15 minutes, remain there for 10 minutes, and then ramp up to 1200ºC over a period of 110 minutes, remain for 10 minutes, then ramp down to 20ºC over a period of 280 minutes. I ran through all the string codes in the program and the only two I can't validate is Run Recipe string $0101W065.0000G2 and the cancel recipe string $0101W063.0000G0
I called and sent emails to Omega on this issue and their response is that they don’t do third party programming. I was hoping that by posting it on here that someone may have used the program and could confirm if it works or not and if it didn’t work could possible tell me what needs to be changed. I’m really beating my head against the wall here and use help from anyone.
Thanks again.
Kevin

Has anyone got PPTP VPN to work on Lion Server?

Has anyone got PPTP VPN to work on Lion Server?
I had a go with the terminal commnds posted by apple support but no joy. Since then Apple has pulled the suport article - is it because it didn't work?
I get PPTP is less secure but PPTP seems to be more reliable don't know whey they can't keep as GUI. I've got them both running on our 10.4 server and L2TP stoped allowing connections for no reason PPTP was still working L2TP started working again on its own. Plus L2TP drops my connection when I connect with a 2nd device e.g connected with my Macbook connect with my iPhone (different username) it drops my Macbook.
Any advice getting PPTP to work on Lion Server would be appreciated
Thanks
Ben

Hi,
I have posted a bugreport on this issue to Apple. Currently (10.7.2) it is not possible to run PPTP on any Mac OS X Server when using a 10.7 Server as Directory Server.
I have tried 'everything', but the MPPE encryption mechanism seems to be broken.
Edit: I see now that the bugreport is filed as a duplicate to an older case, which is now closed. I hope this means they have found the problem and will release a fix in the next update.

Has anyone got NVrotate to work under Win98SE?

I installed the latest driver for this card for Win98
NVrotate is not available as an option in Win98SE
Display properties-->settings -->GeForce FX5200
I temporarily moved a drive with WinXP Pro onto this machine.
NVrotate is an available option in
Display properties-->settings -->GeForce FX5200
and works fine.
But for various compatibility reasons this machine has to been running Win98SE.
Has ANYONE got NVrotate to work under Win98 ??????
MSI FX5200 TD128
Gigabyte GA-7VAX
AMD 2400+
17" Analog LCD & 18.1" Analog LCD

I managed to get it to work, you have to install two files
the first for the actual python script files.
the second for the user interface.
you might have installed the user interface, but without installing python, and that's why its not loading up the application, also make sure you install python to phone memory.
On my N96 I installed:
Python for S60 1.4.4
Python script shell 1.4.4
if you get an 'update error' when installing its because you have not un-installed all of the old python stuff, open app manager on the handset and un-install all python relating files
one last thing, install python and the shell to the phone memory (c drive)
Hope it helps
Tony

Has anyone got Safari to work with Kerberos (SPNEGO) ?

Has anyone got Safari to with using Negotiate (SPNEGO with Kerberos) when the system is not bound to ActiveDirectory or Macs OpenDirectory?
I can load Firefox and it works fine, but Safari does not work. I keep hearing that Safari works out of the box, but its looks like its somehow tied to AD or Macs Opendirectory and its deployment of Kerberos.

I am having the same problem and checked out the Apple Discussions for a solution.
I too am meticulous with my addresses.
Seeing no solution I went back to testing.
I have tried:
From Shrewsbury
To Telford
The result was a trip in the US taking 14 hours.
Then I tried:
From Shrewsbury UK
To Telford UK
This worked.
When on the "Get Directions" screen there is a "Globe" icon by the "Space" icon. Pressing this brings up "English (US)". Press again and you get "English (UK).
Any ideas?
When I use the "Contacts" to get the Start and End fields the iPhone is bringing up the correct address but with "United States" at the end of the address.
Again any ideas?
In my Address book I never use the "Country" field as all my contacts are in the UK. I wonder if this is the problem and the iPhone is defaulting to US in the absence of no "Country"?
Help!

Has anyone got Thunderbird/Ovi sync to work?

Similar Messages

Maybe you are looking for