Has anyone had a problem using Mainstage 2 and Logic 9 with PreSonus fire studio Mobile?
I Still can't get Mainstage and Logic to play well with my setup. I'm using a Mac Pro 2 GHz Intel Core i7 with 4 GB ram and Logic 9.1.6 and Mainstage2. I have a PreSonus Firestudio Mobile and M-Audio Midisport midi interfaces. The only Midisport that works consistently is a MisiSport 2X2 sith a thru/merge switch set to merge. I am playing all of this with a Roland A-90 keyboard. Logic sometimes starts, but the audio interface doesn't work. Mainstage crashes on start-up. Can anyone help?
Thanks,
Bob
Hi
There have been several reported issues on this forum about problems a) with Roland controllers (Sending MIDI Clock and 'All Notes Off' ???), and b) MIDSport interfaces
https://discussions.apple.com/message/17138809#17138809
https://discussions.apple.com/message/17011191#17011191
I suggest that you try a 'scientific' process of elimination:
Disconnect all external hardware, and try MS
Connect the hardware singly, one at a time, to determine which is causing the problem
CCT
Similar Messages
-
i have a MacBook pro. I'm trying to connect my Mac through wifi at my house, it shows my router says it's connected with full signal yet I have no internet. So I thought I would try it at my friends house but I had the same problem. the Internet connection and wifi were on, as our iPhones were working through wifi. And my friends Mac works via wifi at my house. Just mine dosnt has anyone had this problem or can help me with this problem thanks.
Try this.
Power off the router. Unplug it from the wall. Wait a while.
Plug it back to the wall. Power the router on. Wait until all the lights are lit properly. It will take a while.
Restart the computer.
Start up in Safe Mode.
http://support.apple.com/kb/PH14204 -
Has anyone had a problem using e-tax?
Has anyone had a problem using e-tax? If so, can it be fixed?
Yes, I had a problem where I could not open an existing data file. And I have a solution. (I found on Whirlpool.)
Do NOT click Yes to use an existing data file. Instead go to File in the Menu Bar and open an (the) existing file from last used list. Good luck! I hope the ATO can get these issues sorted. ETax for Mac has been a long time coming. -
Has anyone had power problems using Entune ?
When I use the Entune app in my Toyota and then shut it off and leave the car it appears to leave something running which exhausts the battery on my iPhone 5 and my old iPhone 4 in a few hours. Has anyone else had the same experience? Do you have any other solution than powering the iPhone down and rebooting?
Contact the app developer and report the problem.
-
I recently updated? to Lion from 10.6.8(snow leopard), and things seem to be running slower. Has anyone had similar problems? I have Feb 2011 Macbook pro 13" 2.3 Ghz.
As Shootist pointed out, the system uses more power.
However, initially it will reindex the hard drive for spotlight, which will slow things down temporarily.
It also must rebuild caches that eventually will speed things up.
If it has completed indexing the hard drive (no dot pulsing in the spyglass), then there might be something wrong.
Start by booting into the Recovery HD (a partition created with Lion that has Disk Utility and reinstallation options) by holding down cmd-r when you restart. You can let go when the gray screen appears.
When it boots, select Disk Utility and Repair the drive.
If that doesn't speed things up, try re-installing the OS from the same Recovery HD. It won't delete any of your files, but it has helped some people whose Macs ran slow after installing Lion.
Also, how much memory do you have? Lion needs RAM so maxing your Mac out might also help. -
Under the iCloud portion of settings on my iPhone, I have always gotten the message "account not verified". The email matches and is in fact the same for my accounts on iCloud and iTunes. Has anyone had this problem, and how have they resolved it?
Hello megalina23
You need to verify the email address associated with the Apple ID. Check out the article below on how to do this.
Associating and verifying email addresses with your Apple ID
http://support.apple.com/kb/HE68
Thanks for using Apple Support Communities.
Regards,
-Norm G. -
Has anyone had a problem of not getting sounds when using apps but you can still listen to music and hear videos?
Try reset iPad
Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
Note: Data will not be affected. -
I cant update or remove itunes without receiving the message: the install source (itunes.msi) for this product is not available. verify that the source exist and that you can access it. Has anyone had this problem? Thanks
(1) Download the Windows Installer CleanUp utility installer file (msicuu2.exe) from the following Major Geeks page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page):
http://majorgeeks.com/download.php?det=4459
(2) Doubleclick the msicuu2.exe file and follow the prompts to install the Windows Installer CleanUp utility. (If you're on a Windows Vista or Windows 7 system and you get a Code 800A0046 error message when doubleclicking the msicuu2.exe file, try instead right-clicking on the msicuu2.exe file and selecting "Run as administrator".)
(3) In your Start menu click All Programs and then click Windows Install Clean Up. The Windows Installer CleanUp utility window appears, listing software that is currently installed on your computer.
(4) In the list of programs that appears in CleanUp, select any iTunes entries and click "Remove", as per the following screenshot:
(5) Quit out of CleanUp, restart the PC and try another iTunes install. Does it go through properly this time? -
The vibrate symbol that appears on screen when turning vibrate on, continually appears on my screen and vibrates all day. Has anyone had this problem or know how to fix it?
Although you say you have let the battery drain, was it for long enough? Since nothing else that you've tried so far has worked, I suggest that you leave the iPod unplugged for at least four days, preferably a week. That way, if something is stopping the iPod from turning the screen on, then whatever it is will drain the battrey. However, since the screen isn't on, that may take longer than if the screen was on.
Then, after that time, plug the iPod into a power source and leave it alone for at least thirty minutes. Only after thirty minutes will it show any signs of life, but you should leave it until it is fully charged before trying to use it.
If you get to this stage, the fact that the battery has drained will cause the iPod to reset when it springs back to life.
Let us know how you get on. -
Has anyone had a problem with TapMedia File Manage installed on iPhone 5? I reported a WIFI functionality problem to the developer and asked for support. Instead the company has been very unprofessional by name calling me instead of logically evaluate and troubleshoot the problem
Hi AKE1919,
Welcome to the Support Communities!
The following information should help you with this:
How to report an issue with your iTunes Store, App Store, Mac App Store, or iBookstore purchase
http://support.apple.com/kb/HT1933?viewlocale=en_US
Cheers,
Judy -
When I try to download iPhone OS 5.1.0 on my PC I get this message "stopped (err = -3259)"and says it timed out at the server after the entire download. I have tried 3 times, it takes about 8 min. to download the 790.7 MB file. Has anyone had this problem and what is the fix?
See "error -3259" here.
-
I have a number of hard drives that my Mac Book Pro no longer 'recognises' at least for very long. When I turn them on the deskstop icon shows up but then shortly afterwards I get a message saying that it has been unplugged incorrectly. I haven't unplugged it any of them. When I try to run very/repair disk before they disappear I get the error in the subject line above. Has anyone had this problem and if so how did you rectify it?
The drive is malfunctioning and needs to be replaced, or you have some other hardware fault.
Make a "Genius" appointment at an Apple Store.
Back up all data on the internal drive(s) before you hand over your computer to anyone. If privacy is a concern, erase the data partition(s) with the option to write zeros* (do this only if you have at least two complete, independent backups, and you know how to restore to an empty drive from any of them.) Don’t erase the recovery partition, if present.
Keeping your confidential data secure during hardware repair
*An SSD doesn't need to be zeroed. -
Has anyone had a problem centering labels from microsoft word 2007 using the hp photosmart 7510? my
Has anyone had a problem with printing labels centered on HP Photosmart 7510 e-All in one? My labels are printed from Word 2007 and appear on the screen to be centered, however when I print, they are too high on the label. Also when printing an e-mail the bottom of the page where it lists your email name is cut off. Please help!!
Hi,
I'd been having this problem for probably round 30 years on many printers. I bought a labels printer few years back but I don't print labels everyday now.
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem. -
Has anyone had a problem with Draft Emails getting sent with Mac OS 10.8.2? It just happened to me and sent a few drafts out to a potential employer I planned on sending out tomorrow.
Hi, one question & one suggestion...
What possible things are connected at home but not at the store, inlude every cable, etc.
One way to test is to Safe Boot from the HD, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, Test for problem in Safe Mode...
PS. Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive
Reboot, test again.
If it only does it in Regular Boot, then it could be some hardware problem like Video card, (Quartz is turned off in Safe Mode), or Airport, or some USB or Firewire device, or 3rd party add-on, Check System Preferences>Accounts>Login Items window to see if it or something relevant is listed.
Check the System Preferences>Other Row, for 3rd party Pref Panes.
Also look in these if they exist, some are invisible...
/private/var/run/StartupItems
/Library/StartupItems
/System/Library/StartupItems
/System/Library/LaunchDaemons
/Library/LaunchDaemons -
I bought a magazine subscription on my iPAD and after being charged, it does not come up on my screen. Has anyone had this problem?
When I click on the magazine, my screen is just blank. I can see the purchase, and in my settings/store, the magazine shows "ON".I would do a power cycle/reset of your device first, if you haven't, to rule that out.
http://support.apple.com/kb/HT1430
If that doesn't help, talking to iTunes customer support would be in order...or whoever you purchased the magazine subscription through.
http://www.apple.com/support/itunes/
If the magazine is browser based, you might also try another browser. I like "Atomic Browser". It is available on the app store.
Maybe you are looking for
-
Dear Experts, We are developing a report for open line items for a customer though we have the standard T Code FBL5N. We have used BSAD table to get the open line item. But we are not getting exactly what we want. could u please suggest the table na
-
The Volume Shadow Copy service initially was running under the context of System, so we thought that 'System' doesn't have permissions to access network shares. When the Volume Shadow Copy service was running under the context of System, this was th
-
Download option is not working
my nokia x6 00 ,in Nokia Store option ..download option is not working Moderator's note: We have provided a subject-related title to help other forum users easily view and respond to this post.
-
When I am in any application. I want to go back to the last page, I don't know how. Not like in the PC, there is a go back tab. Please instruct.
-
The spinning pinwheel on my Imac
The spinning pinwheel on my Imac constantly causes delays when using the machine. The hard drive has been replaced and the system scanned with MacKeeper showing no problems. Any ideas?